HYHwanhui Yun

Hwanhui Yun

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hwanhui Yun has a total of 107 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Breaking voltage-controlled magnetic anisotropy–magnetoresistance trade-off for ultralow-energy switching in magnetic tunnel junctions

    by Yu Zhang, Meng Xu, Bowei Zhou, Carter Eckel, Supriya Ghosh, Hwanhui Yun, Ali Habiboglu, Deyuan Lyu, Daniel B. Gopman, Jian-Ping Wang, et al.

    Electric-field control of spin states offers a promising route to ultralow-power, ultrafast magnetization switching in spintronic devices such as magnetic tunnel junctions (MTJs). However, enhancing voltage-controlled magnetic anisotropy (VCMA) through interfacial engineering often disrupts coherent tunneling and suppresses tunnel magnetoresistance (TMR), limiting practical device performance. Here, we experimentally demonstrate highly energy-efficient, voltage-driven magnetization switching in MTJs enabled by a remote iridium (Ir) doping strategy that tailors the Ir concentration near the MgO/CoFeB interface in the free layer. By inserting an ultrathin Ir layer away from the tunnel barrier and leveraging controlled diffusion during annealing, we achieve sub-nanosecond switching with an energy of only 3.5 femtojoules per bit in nanoscale MTJs while maintaining a TMR ratio up to 160% after 400°C postannealing. These results resolve a long-standing VCMA-TMR trade-off and establish a scalable pathway toward ultralow-power nonvolatile spintronic devices under aggressive energy and scaling constraints.

  • Evidence of anomalous vortex Hall effect in a ferromagnet/superconductor heterostructure

    by Weideng Sun, Przemyslaw Swatek, Yihong Fan, Hwanhui Yun, Deyuan Lyu, K. Andre Mkhoyan, Jian-Ping Wang, Gang Qiu

    The coexistence of superconductivity and ferromagnetism is a fascinating and complex phenomenon in condensed matter physics, as these two states are typically mutually exclusive due to their competing spin configurations. However, the interplay between these two orders has been a subject of intense research as it opens up possibilities for novel technological applications. Here, we report the coexistence of superconductivity and ferromagnetism in superconducting δ-TaN/ferromagnetic CoFeB heterostructures grown by facing-target sputtering. Superconducting states are comprehensively investigated, with evidence of correlation between superconducting and ferromagnetic order parameters. In particular, we observed an anomalous Hall signal without externally applied magnetic field in the mixed state near the superconducting critical temperature. The non-zero Hall resistance under varying temperatures and magnetic fields was systematically investigated. A possible mechanism associated with anomalous vortex Hall effect is proposed to explain the observed behavior, whereby superconducting vortices in the mixed state undergo transverse motions near the critical temperature. The concurrency of strong spin–orbit coupling, the superconductivity in the TaN layer, and the ferromagnetic ordering in the CoFeB layer offers new insights into vortex dynamics. Realizing this vortex dynamics spontaneously without an external magnetic field highlights the unique advantage of the TaN/CoFeB heterostructure, offering practical relevance for superconducting spintronic devices under zero external magnetic field.

  • Cluster-type conductive path-based selector-less 1R memristor array for spiking neural networks

    by Ji Eun Kim, Suman Hu, Ju Young Kwon, Suk Yeop Chun, Keunho Soh, Hwanhui Yun, Seung-Hyub Baek, Sahn Nahm, Yeon Joo Jeong, Jung Ho Yoon


  • Solar-driven triple photocatalytic action of defective S-doped g-C3N4 for 1,4 NADH regeneration and simultaneous benzylamine conversion along with CO2 fixation into HCOOH

    by Kanchan Sharma, Rajesh K. Yadav, Rajesh K. Verma, Satyam Singh, Shaifali Mishra, Rehana Shahin, Atul P. Singh, Chandani Singh, Navneet K. Gupta, Jin-OoK Baeg, et al.

    Incorporating defects through intrinsic defect engineering has emerged as a versatile strategy for finely tuning the key properties of materials, particularly the redox capacity. Defects are fundamentally important in enhancement of the electronic, optical, and structural properties, thereby improving the photocatalytic effectiveness of a material. In this study, defects were induced in sulphur-doped graphitic carbon nitride through treatment with NaBH4. This process notably enhanced the material's capacity to capture light, demonstrating the effectiveness of introducing defects to improve its performance. This work describes the photocatalytic action of defective S-doped g-C3N4 (DSGN), where the surface electrons from the DSGN photocatalyst were directed to selectively reduce CO2 to formic acid while the holes assisted in the coupling of benzylamines. Notably, this process occured under the illumination of solar light without the need for any external sacrificial agent or bio-enzyme. The simultaneous conversion of benzylamines to their corresponding imines (94%) and CO2 transformation into HCOOH (203.46 mol gcat −1) carried out under ordinary environmental conditions promoted by the DSGN photocatalyst make this a remarkable process. In addition to this, the DSGN photocatalyst showed a significant 1,4 NADH regeneration yield (75.40%) in 1 h. The recyclability and physico-chemical stability tests for DSGN demonstrated its high stability and suitability for repeated use. This work on photocatalysis utilizing the DSGN photocatalyst for both environmental remediation (CO2 reduction) and organic transformations (benzylamine coupling) in one step and exceptional 1,4 NADH regeneration capabaility has potential to contribute to the fields of green chemistry and sustainable energy.


  • Uncovering Atomic Migrations Behind Magnetic Tunnel Junction Breakdown

    by Hwanhui Yun, Deyuan Lyu, Yang Lv, Brandon R. Zink, Pravin Khanal, Bowei Zhou, Wei-Gang Wang, Jian-Ping Wang, K. Andre Mkhoyan

    As advances in computing technology increase demand for efficient data storage solutions, spintronic magnetic tunnel junction (MTJ)-based magnetic random-access memory (MRAM) devices emerge as promising alternatives to traditional charge-based memory devices. Successful applications of such spintronic devices necessitate understanding not only their ideal working principles but also their breakdown mechanisms. Employing an in situ electrical biasing system, atomic-resolution scanning transmission electron microscopy (STEM) reveals two distinct breakdown mechanisms. Soft breakdown occurs at relatively low electric currents due to electromigration, wherein restructuring of MTJ core layers forms ultrathin regions in the dielectric MgO layer and edge conducting paths, reducing device resistance. Complete breakdown occurs at relatively high electric currents due to a combination of joule heating and electromigration, melting MTJ component layers at temperatures below their bulk melting points. Time-resolved, atomic-scale STEM studies of functional devices provide insight into the evolution of structure and composition during device operation, serving as an innovative experimental approach for a wide variety of electronic devices.


  • Substrate-dependent structural evolution during the oxidation of SiNx thin films

    by Gowun Jung, Sehun Kim, Jiho Eom, In Young Song, Jinhee Lee, Seong-Keun Cho, Wang-Eun Lee, Kyuyoung Heo, Tae-Yeon Cho, Hwanhui Yun


  • Electrical control of the switching layer in perpendicular magnetic tunnel junctions with atomically thin Ir dusting

    by Deyuan Lyu, Pravin Khanal, Qi Jia, Silu Guo, Yang Lv, Brandon R. Zink, Yu Zhang, Hwanhui Yun, Bowei Zhou, K. Andre Mkhoyan, et al.

    The use of magnetic tunnel junction (MTJ)-based devices constitutes an important basis of modern spintronics. However, the switching layer of an MTJ is widely believed to be an unmodifiable setup, instead of a user-defined option, posing a restriction to the function of spintronic devices. In this study, we realized a reliable electrical control of the switching layer in perpendicular MTJs with 0.1 nm Ir dusting. Specifically, a voltage pulse with a higher amplitude drives the magnetization switching of the MTJ's bottom electrode, while a lower voltage amplitude switches its top electrode. We discussed the origin of this controllability and excluded the possibility of back-hopping. Given the established studies on enhancing the voltage-controlled magnetic anisotropy effect by adopting Ir, we attribute this switching behavior to the significant diffusion of Ir atoms into the top electrode, which is supported by scanning transmission electron microscopy with atomic resolution.


  • Open Access

    Mending cracks atom-by-atom in rutile TiO2 with electron beam radiolysis

    by Silu Guo, Hwanhui Yun, Sreejith Nair, Bharat Jalan, K. Andre Mkhoyan

    Rich electron-matter interactions fundamentally enable electron probe studies of materials such as scanning transmission electron microscopy (STEM). Inelastic interactions often result in structural modifications of the material, ultimately limiting the quality of electron probe measurements. However, atomistic mechanisms of inelastic-scattering-driven transformations are difficult to characterize. Here, we report direct visualization of radiolysis-driven restructuring of rutile TiO2 under electron beam irradiation. Using annular dark field imaging and electron energy-loss spectroscopy signals, STEM probes revealed the progressive filling of atomically sharp nanometer-wide cracks with striking atomic resolution detail. STEM probes of varying beam energy and precisely controlled electron dose were found to constructively restructure rutile TiO2 according to a quantified radiolytic mechanism. Based on direct experimental observation, a “two-step rolling” model of mobile octahedral building blocks enabling radiolysis-driven atomic migration is introduced. Such controlled electron beam-induced radiolytic restructuring can be used to engineer novel nanostructures atom-by-atom.


  • Open Access

    Long-term stability of silane-passivated zirconia nanoparticles with low surface energy

    by Hee-Seon Lee, Hwanseok Lee, Wang-Eun Lee, Jinhee Lee, In Young Song, Hwanhui Yun, Heesoo Lee, Kyuyoung Heo


  • Structural Anisotropy-Driven Atomic Mechanisms of Phase Transformations in the Pt–Sn System

    by Hwanhui Yun, Delin Zhang, Turan Birol, Jian-Ping Wang, K. Andre Mkhoyan

    Using in situ atomic-resolution scanningtransmissionelectron microscopy, atomic movements and rearrangements associatedwith diffusive solid to solid phase transformations in the Pt-Snsystem are captured to reveal details of the underlying atomisticmechanisms that drive these transformations. In the PtSn4 to PtSn2 phase transformation, a periodic superlatticesubstructure and a unique intermediate structure precede the nucleationand growth of the PtSn2 phase. At the atomic level, allstages of the transformation are templated by the anisotropic crystalstructure of the parent PtSn4 phase. In the case of thePtSn(2) to Pt2Sn3 transformation, theanisotropy in the structure of product Pt2Sn3 dictates the path of transformation. Analysis of atomic configurationsat the transformation front elucidates the diffusion pathways andlattice distortions required for these phase transformations. Comparisonof multiple Pt-Sn phase transformations reveals the structuralparameters governing solid to solid phase transformations in thistechnologically interesting intermetallic system.