Jonas Ågren
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jonas Ågren has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Anders Alfredsson
University of Gävle
2 shared publications - Artu Ellmann
Department of Civil Engineering and Architecture, Tallinn University of Technology, Tallinn, Estonia
1 shared publication - Christoph Förste
GFZ Helmholtz Centre for Geosciences
1 shared publication - Eimuntas Parseliunas
Vilnius Gediminas Technical University, Vilnius, Lithuania
1 shared publication - Elmas Sinem Ince
GFZ Helmholtz Centre for Geosciences
1 shared publication - Gabriel Strykowski
Technical University of Denmark – National Space Institute (DTU Space), Lyngby, Denmark
1 shared publication
Latest Publications
- Open Access
- 29 July 2026
- Published by Springer Nature in Journal of Geodesy
- Vol. 100 (8) , 65
The development of the unified Baltic Sea Chart Datum 2000 (BSCD2000) height transformation grid: an unprecedented example of height system unification based on state-of-the-art marine geoid modelling
The shallow Baltic Sea is a vital waterway with dense shipping traffic, requiring accurate and reliable nautical charts for safe navigation. Until recently, different realisations of the mean sea level were used in the paper charts of each country, sometimes even between harbours. This created obstacles for the digitalisation of ship navigation, including electronic nautical charts combined with satellite-based positioning. To resolve this, the Baltic Sea Hydrographic Commission decided in 2013 to introduce the Baltic Sea Chart Datum 2000 (BSCD2000) as a common height/depth reference system for the maritime sector in the Baltic Sea. The new reference level for all depth and water level information is strictly the quasigeoid, which is practically identical to the geoid at sea. The BSCD2000 is defined in accordance with the European reference systems: the European Terrestrial Reference System 1989 (ETRS89) for ellipsoidal coordinates and the European Vertical Reference System (EVRS) for physical heights. This enables the practical implementation of the zero level through a seamless height transformation grid with standard uncertainties of approximately 1–2 cm, which is harmonised with national coordinates, heights, and height reference surfaces. To the authors’ knowledge, this level of harmonisation is unprecedented in the maritime sector and exemplifies the value of the unification of height systems in geodesy. The paper outlines the foundations of the BSCD2000 and the approach to construct the BSCD2000 height transformation grid. While the computation of the gravimetric marine quasigeoid model is based on well-established methods, special focus is placed on practical harmonisation across national borders and along the coastline. To this end, a novel fitting and blending scheme based on distance maps was developed. Finally, comparison of the new gravimetric marine quasigeoid solution with a preliminary geometric marine geoid model based on SWOT altimetry data and hydrodynamic modelling confirmed good agreement within a few centimetres in most areas of the Baltic Sea.
- 29 July 2026
- Published by Springer Nature in Journal of Geodesy
- Vol. 100 (8) , 65
Open AccessThe development of the unified Baltic Sea Chart Datum 2000 (BSCD2000) height transformation grid: an unprecedented example of height system unification based on state-of-the-art marine geoid modelling
The shallow Baltic Sea is a vital waterway with dense shipping traffic, requiring accurate and reliable nautical charts for safe navigation. Until recently, different realisations of the mean sea level were used in the paper charts of each country, sometimes even between harbours. This created obstacles for the digitalisation of ship navigation, including electronic nautical charts combined with satellite-based positioning. To resolve this, the Baltic Sea Hydrographic Commission decided in 2013 to introduce the Baltic Sea Chart Datum 2000 (BSCD2000) as a common height/depth reference system for the maritime sector in the Baltic Sea. The new reference level for all depth and water level information is strictly the quasigeoid, which is practically identical to the geoid at sea. The BSCD2000 is defined in accordance with the European reference systems: the European Terrestrial Reference System 1989 (ETRS89) for ellipsoidal coordinates and the European Vertical Reference System (EVRS) for physical heights. This enables the practical implementation of the zero level through a seamless height transformation grid with standard uncertainties of approximately 1–2 cm, which is harmonised with national coordinates, heights, and height reference surfaces. To the authors’ knowledge, this level of harmonisation is unprecedented in the maritime sector and exemplifies the value of the unification of height systems in geodesy. The paper outlines the foundations of the BSCD2000 and the approach to construct the BSCD2000 height transformation grid. While the computation of the gravimetric marine quasigeoid model is based on well-established methods, special focus is placed on practical harmonisation across national borders and along the coastline. To this end, a novel fitting and blending scheme based on distance maps was developed. Finally, comparison of the new gravimetric marine quasigeoid solution with a preliminary geometric marine geoid model based on SWOT altimetry data and hydrodynamic modelling confirmed good agreement within a few centimetres in most areas of the Baltic Sea.
- 15 May 2026
- Published by Springer Nature
Investigation of Systematic Errors Due to Stochastic Modification of Stokes’ Formula in the Realisation of IHRS
The International Height Reference System (IHRS) can be realised by geopotential numbers derived from a regional gravimetric (quasi)geoid model and ellipsoidal heights determined by a satellite technique like GNSS. One method to compute the gravimetric model is to use a stochastic kernel modification to combine a satellite-derived Earth Gravitational Model (EGM) with regional terrestrial gravity data, for instance the least squares modification of Stokes’ formula. Often degree variance models are used to model the a priori errors and the signal variation, for instance the bandlimited white noise or reciprocal distance models. A potential problem here is that the stochastic modification might give too high weight to the terrestrial gravity data for low to medium spherical harmonic degrees, leading to that the satellite-only EGM is changed for degrees where the GOCE and GRACE derived EGM is clearly superior to the regional terrestrial gravity data. The main purpose of this contribution is to study the above type of systematic error that might be generated by stochastic kernel modification. This is investigated empirically over a case study area covering Sweden. It is shown that the bandlimited white noise model with a low standard uncertainty introduces a significant systematic errror of about 0.050 gpu over Sweden. By using coloured noise instead, or the Wong and Gore kernel modification, this systematic bias can be avoided in the realisation of IHRS.
- 15 May 2026
- Published by Springer Nature
Investigation of Systematic Errors Due to Stochastic Modification of Stokes’ Formula in the Realisation of IHRS
The International Height Reference System (IHRS) can be realised by geopotential numbers derived from a regional gravimetric (quasi)geoid model and ellipsoidal heights determined by a satellite technique like GNSS. One method to compute the gravimetric model is to use a stochastic kernel modification to combine a satellite-derived Earth Gravitational Model (EGM) with regional terrestrial gravity data, for instance the least squares modification of Stokes’ formula. Often degree variance models are used to model the a priori errors and the signal variation, for instance the bandlimited white noise or reciprocal distance models. A potential problem here is that the stochastic modification might give too high weight to the terrestrial gravity data for low to medium spherical harmonic degrees, leading to that the satellite-only EGM is changed for degrees where the GOCE and GRACE derived EGM is clearly superior to the regional terrestrial gravity data. The main purpose of this contribution is to study the above type of systematic error that might be generated by stochastic kernel modification. This is investigated empirically over a case study area covering Sweden. It is shown that the bandlimited white noise model with a low standard uncertainty introduces a significant systematic errror of about 0.050 gpu over Sweden. By using coloured noise instead, or the Wong and Gore kernel modification, this systematic bias can be avoided in the realisation of IHRS.
- Open Access
- 24 October 2025
- Published by Springer Nature
- p. 75-83
Consistent Model-Based Determination of New Geopotential Numbers in a Levelling-Assisted Regional IHRS Realisation
A common global vertical reference frame for physical heights is essential for many applications, such as studying and monitoring climate-related changes within the Earth system. The International Height Reference System (IHRS), defined by the International Association of Geodesy (IAG) in 2015, provides a global reference for physical heights. On a regional or local level, a combination of GNSS, a gravimetric (quasi)geoid model and precise levelling observations is an option to realise the IHRS. A previous study has shown that this so-called levelling-assisted realisation has the potential to significantly improve the standard (GNSS- and) model-based method in case a properly weighted least squares adjustment is made. This can result in a dense IHRF solution with reduced uncertainty. However, model-based geopotential numbers determined without levelling at a later stage will then not agree with the already existing levelling-assisted realisation. This disagreement is due to the smoothing effect obtained in the network adjustment process. The smoothing effect is caused by the low relative uncertainty of levelling observations, especially over short distances. In this contribution, we study this potentially systematic bias and how to construct a correction model to be applied to model-based geopotential numbers to improve their agreement with a weighted levelling-assisted IHRS realisation. This is investigated in a case study over Sweden. It is found that the proposed correction model does not significantly improve the systematic agreement between a model-based realisation made at a later stage with the levelling-assisted realisation in Sweden. However, it is concluded that it is important to be aware of that this type of correction might be needed in other regions. This should be investigated for any new levelling-assisted realisation.
- 24 October 2025
- Published by Springer Nature
- p. 75-83
Open AccessConsistent Model-Based Determination of New Geopotential Numbers in a Levelling-Assisted Regional IHRS Realisation
A common global vertical reference frame for physical heights is essential for many applications, such as studying and monitoring climate-related changes within the Earth system. The International Height Reference System (IHRS), defined by the International Association of Geodesy (IAG) in 2015, provides a global reference for physical heights. On a regional or local level, a combination of GNSS, a gravimetric (quasi)geoid model and precise levelling observations is an option to realise the IHRS. A previous study has shown that this so-called levelling-assisted realisation has the potential to significantly improve the standard (GNSS- and) model-based method in case a properly weighted least squares adjustment is made. This can result in a dense IHRF solution with reduced uncertainty. However, model-based geopotential numbers determined without levelling at a later stage will then not agree with the already existing levelling-assisted realisation. This disagreement is due to the smoothing effect obtained in the network adjustment process. The smoothing effect is caused by the low relative uncertainty of levelling observations, especially over short distances. In this contribution, we study this potentially systematic bias and how to construct a correction model to be applied to model-based geopotential numbers to improve their agreement with a weighted levelling-assisted IHRS realisation. This is investigated in a case study over Sweden. It is found that the proposed correction model does not significantly improve the systematic agreement between a model-based realisation made at a later stage with the levelling-assisted realisation in Sweden. However, it is concluded that it is important to be aware of that this type of correction might be needed in other regions. This should be investigated for any new levelling-assisted realisation.
- Open Access
- 1 February 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Surveying Engineering
- Vol. 149 (1) , 04022014
Physical and Geometric Effects on the Classical Geodetic Observations in Small-Scale Control Networks
In classical two-dimensional (2D) geodetic networks, reducing slope distances to horizontal ones is an important task for engineers. These horizontal distances along with horizontal directions are used in 2D geodetic adjustment. The common practice for this reduction is the use of vertical angles to reduce distances using trigonometric rules. However, one faces systematic effects when using vertical angles. These effects are mainly due to refraction, deflection of the vertical (DOV), and the geometric effect of the reference surface (sphere or ellipsoid). To mitigate refraction and DOV effects, one can choose to observe the vertical angles reciprocally if the baseline points’ elevation difference is small. This paper quantifies these effects and proposes a proper solution to eliminate the effects in small-scale geodetic networks (where the longest distances are less than 5 km). The goal is to calculate slope distances into horizontal ones appropriately. For this purpose, we used the SWEN17_RH2000 quasigeoid model (in Sweden) to study the impact of the DOV applying different baseline lengths, azimuths, and vertical angles. Finally, we propose an approach to study the impact of the geometric effect on vertical angles. We illustrate that the DOV and the geometric effects on vertical angles measured reciprocally are significant if the height difference of the start point and endpoint in the baseline is large. Geometric correction should be considered for the measured vertical angles to calculate horizontal distances correctly if the network points are not on the same elevation, even if the vertical angles are measured reciprocally.
- 1 February 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Surveying Engineering
- Vol. 149 (1) , 04022014
Open AccessPhysical and Geometric Effects on the Classical Geodetic Observations in Small-Scale Control Networks
In classical two-dimensional (2D) geodetic networks, reducing slope distances to horizontal ones is an important task for engineers. These horizontal distances along with horizontal directions are used in 2D geodetic adjustment. The common practice for this reduction is the use of vertical angles to reduce distances using trigonometric rules. However, one faces systematic effects when using vertical angles. These effects are mainly due to refraction, deflection of the vertical (DOV), and the geometric effect of the reference surface (sphere or ellipsoid). To mitigate refraction and DOV effects, one can choose to observe the vertical angles reciprocally if the baseline points’ elevation difference is small. This paper quantifies these effects and proposes a proper solution to eliminate the effects in small-scale geodetic networks (where the longest distances are less than 5 km). The goal is to calculate slope distances into horizontal ones appropriately. For this purpose, we used the SWEN17_RH2000 quasigeoid model (in Sweden) to study the impact of the DOV applying different baseline lengths, azimuths, and vertical angles. Finally, we propose an approach to study the impact of the geometric effect on vertical angles. We illustrate that the DOV and the geometric effects on vertical angles measured reciprocally are significant if the height difference of the start point and endpoint in the baseline is large. Geometric correction should be considered for the measured vertical angles to calculate horizontal distances correctly if the network points are not on the same elevation, even if the vertical angles are measured reciprocally.
- 2 January 2021
- Published by Taylor & Francis in Survey Review
- Vol. 54 (382) , 57-69
Empirical comparison between stochastic and deterministic modifiers over the French Auvergne geoid computation test-bed
Since 2006, several different groups have computed geoid and/or quasigeoid (quasi/geoid) models for the Auvergne test area in central France using various approaches. In this contribution, we compute and compare quasigeoid models for Auvergne using Curtin University of Technology’s and the Swedish Royal Institute of Technology’s approaches. These approaches differ in many ways, such as their treatment of the input data, choice of type of spherical harmonic model (combined or satellite-only), form and sequence of correction terms applied, and different modified Stokes’s kernels (deterministic or stochastic). We have also compared our results with most of the previously reported studies over Auvergne in order to seek any improvements with respect to time [exceptions are when different subsets of data have been used]. All studies considered here compare the computed quasigeoid models with the same 75 GPS-levelling heights over Auvergne. The standard deviation for almost all of the computations (without any fitting) is of the order of 30–40 mm, so there is not yet any clear indication whether any approach is necessarily better than any other nor improving over time. We also recommend more standardisation on the presentation of quasi/geoid comparisons with GPS-levelling data so that results from different approaches over the same areas can be compared more objectively.
- 2 January 2021
- Published by Taylor & Francis in Survey Review
- Vol. 54 (382) , 57-69
Empirical comparison between stochastic and deterministic modifiers over the French Auvergne geoid computation test-bed
Since 2006, several different groups have computed geoid and/or quasigeoid (quasi/geoid) models for the Auvergne test area in central France using various approaches. In this contribution, we compute and compare quasigeoid models for Auvergne using Curtin University of Technology’s and the Swedish Royal Institute of Technology’s approaches. These approaches differ in many ways, such as their treatment of the input data, choice of type of spherical harmonic model (combined or satellite-only), form and sequence of correction terms applied, and different modified Stokes’s kernels (deterministic or stochastic). We have also compared our results with most of the previously reported studies over Auvergne in order to seek any improvements with respect to time [exceptions are when different subsets of data have been used]. All studies considered here compare the computed quasigeoid models with the same 75 GPS-levelling heights over Auvergne. The standard deviation for almost all of the computations (without any fitting) is of the order of 30–40 mm, so there is not yet any clear indication whether any approach is necessarily better than any other nor improving over time. We also recommend more standardisation on the presentation of quasi/geoid comparisons with GPS-levelling data so that results from different approaches over the same areas can be compared more objectively.