Khaled Ahmadaali
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Khaled Ahmadaali has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
Abdolmajid Liaghat
Department of Irrigation and Reclamation Engineering University of Tehran Karaj Iran
3 shared publicationsAnita Ghasemi
Department of Environmental Science and Engineering, Faculty of Natural Resources, University of Tehran, Karaj, Iran
2 shared publicationsBehnam Ababaei
Queensland Alliance for Agriculture and Food Innovation (QAAFI), the Centre for Crop Science, the University of Queensland, Brisbane, Australia
2 shared publicationsIman Hajirad
Department of Irrigation and Reclamation Engineering, College of Agriculture and Natural Resources, University of Tehran, Karaj, Iran
2 shared publications- Majid Rahimi
Social Business Institute, University of Tehran, Tehran, Iran
2 shared publications - Abdolmajid Liaghat
University of Tehran, Karaj, Iran
1 shared publication
Latest Publications
- 16 August 2026
- Published by Wiley in Irrigation and Drainage
Drainage Water Recycling in Tile‐Drained Agricultural Landscapes: An Integrated Review of Hydrologic and Water Quality Performance, Co‐Benefits, Trade‐Offs and Research Gaps
Drainage water recycling (DWR) is an emerging practice in tile‐drained agricultural landscapes that stores tile drainage in reservoirs and reapplies it as supplemental irrigation, jointly targeting agronomic and environmental objectives. A systematic search identified 27 peer‐reviewed records examining DWR, including 11 field‐based studies (two of which were field‐modelling hybrid analyses), eight modelling studies, seven review/synthesis papers and one dataset paper. Reported outcomes include reductions in nitrate–nitrogen losses of up to 37% and reactive phosphorus of up to 39%, together with yield increases of up to 61% for maize and 31% for soybean in dry years. These concurrent benefits, reduced pollutant loads, more reliable on‐farm irrigation supplies and improved crop yield distinguish DWR from most other edge‐of‐field practices. DWR systems may also provide aquatic and wetland habitats, attenuate runoff and generate aesthetic and recreational co‐benefits, especially when integrated with constructed wetlands or other best management practices. However, land requirements, potential salinity build‐up and microbial contamination in reservoirs, and uncertain net greenhouse gas balances highlight the need for careful design, adaptive operation and monitoring. A pronounced lack of independent long‐term field data on water quality, phosphorus dynamics, surface runoff, habitat services and greenhouse gas emissions remains a critical research bottleneck.
- 16 August 2026
- Published by Wiley in Irrigation and Drainage
Drainage Water Recycling in Tile‐Drained Agricultural Landscapes: An Integrated Review of Hydrologic and Water Quality Performance, Co‐Benefits, Trade‐Offs and Research Gaps
Drainage water recycling (DWR) is an emerging practice in tile‐drained agricultural landscapes that stores tile drainage in reservoirs and reapplies it as supplemental irrigation, jointly targeting agronomic and environmental objectives. A systematic search identified 27 peer‐reviewed records examining DWR, including 11 field‐based studies (two of which were field‐modelling hybrid analyses), eight modelling studies, seven review/synthesis papers and one dataset paper. Reported outcomes include reductions in nitrate–nitrogen losses of up to 37% and reactive phosphorus of up to 39%, together with yield increases of up to 61% for maize and 31% for soybean in dry years. These concurrent benefits, reduced pollutant loads, more reliable on‐farm irrigation supplies and improved crop yield distinguish DWR from most other edge‐of‐field practices. DWR systems may also provide aquatic and wetland habitats, attenuate runoff and generate aesthetic and recreational co‐benefits, especially when integrated with constructed wetlands or other best management practices. However, land requirements, potential salinity build‐up and microbial contamination in reservoirs, and uncertain net greenhouse gas balances highlight the need for careful design, adaptive operation and monitoring. A pronounced lack of independent long‐term field data on water quality, phosphorus dynamics, surface runoff, habitat services and greenhouse gas emissions remains a critical research bottleneck.
- Open Access
- 31 January 2026
- Published by Springer Nature in Discover Water
- Vol. 6 (1)
Low-cost date seed and sawdust-derived biochars for nitrate removal from aqueous solutions
- 31 January 2026
- Published by Springer Nature in Discover Water
- Vol. 6 (1)
Open AccessLow-cost date seed and sawdust-derived biochars for nitrate removal from aqueous solutions
- Open Access
- 20 November 2025
- Published by Elsevier in Cleaner Water
- Vol. 4
Experimental and techno-economic evaluation of a pyramid solar still across tilt angles and cover materials in a semi-arid climate
- 20 November 2025
- Published by Elsevier in Cleaner Water
- Vol. 4
Open AccessExperimental and techno-economic evaluation of a pyramid solar still across tilt angles and cover materials in a semi-arid climate
- Open Access
- 17 August 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 30087
Crop yield and water productivity modeling using nonlinear growth functions
Growth curve modeling plays a crucial role in precision agriculture by enabling rapid analysis of plant growth dynamics. Understanding the complex mechanisms of crop growth is essential for optimizing agricultural productivity. In this study, nonlinear Logistic and Gompertz models were employed to predict biological yield and water productivity of silage maize in arid and semi-arid regions, using growing degree days (GDD) as a key predictor. The experiment included two primary irrigation regimes: deficit irrigation (W2 and W3, providing 60% and 80% of crop water requirements, respectively) and full irrigation (W1, providing 100%). A sigmoid model was also introduced for its ease of biological interpretation. To evaluate model performance, coefficient of determination (R²), normalized root mean square error (NRMSE), and mean absolute percentage error (MAPE) were used. Results indicated that Logistic and Gompertz models achieved high accuracy, with R² exceeding 99% under pulse irrigation and 80% under continuous irrigation. These models revealed that the maximum biological yield rate occurred at GDD equal 1014 °C (50 days after planting). Furthermore, the absolute growth rate followed a bell-shaped pattern in the Logistic model and a right-skewed distribution in the Gompertz model. The findings confirm that Logistic and Gompertz models effectively simulate the dynamic growth of silage maize under varying irrigation and temperature conditions. These models not only facilitate quantitative crop growth predictions but also provide a decision-support tool for irrigation planning and precision crop management in arid and semi-arid regions. The integration of such models into smart agricultural systems can significantly enhance resource optimization and sustainable farming practices.
- 17 August 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 30087
Open AccessCrop yield and water productivity modeling using nonlinear growth functions
Growth curve modeling plays a crucial role in precision agriculture by enabling rapid analysis of plant growth dynamics. Understanding the complex mechanisms of crop growth is essential for optimizing agricultural productivity. In this study, nonlinear Logistic and Gompertz models were employed to predict biological yield and water productivity of silage maize in arid and semi-arid regions, using growing degree days (GDD) as a key predictor. The experiment included two primary irrigation regimes: deficit irrigation (W2 and W3, providing 60% and 80% of crop water requirements, respectively) and full irrigation (W1, providing 100%). A sigmoid model was also introduced for its ease of biological interpretation. To evaluate model performance, coefficient of determination (R²), normalized root mean square error (NRMSE), and mean absolute percentage error (MAPE) were used. Results indicated that Logistic and Gompertz models achieved high accuracy, with R² exceeding 99% under pulse irrigation and 80% under continuous irrigation. These models revealed that the maximum biological yield rate occurred at GDD equal 1014 °C (50 days after planting). Furthermore, the absolute growth rate followed a bell-shaped pattern in the Logistic model and a right-skewed distribution in the Gompertz model. The findings confirm that Logistic and Gompertz models effectively simulate the dynamic growth of silage maize under varying irrigation and temperature conditions. These models not only facilitate quantitative crop growth predictions but also provide a decision-support tool for irrigation planning and precision crop management in arid and semi-arid regions. The integration of such models into smart agricultural systems can significantly enhance resource optimization and sustainable farming practices.
- 13 August 2025
- Published by Wiley in Irrigation and Drainage
- Vol. 74 (5) , 2267-2278
Logistic Modelling of Silage Maize LAI Dynamics Under Different Irrigation Regimes: A Strategy for Optimizing Crop Yield
The leaf area index (LAI) is a vital parameter in crop eco‐physiology because it substantially influences key processes such as evapotranspiration, light interception, photosynthesis and ultimately seed yield. Together with plant height, the LAI serves as a crucial indicator of crop growth and yield potential. Understanding the dynamic variations in LAI and developing reliable predictive models are essential for advancing research and improving agricultural practices. In this study, we employed a simple, experimentally validated logistic model driven by growing degree days (GDDs) to predict the LAI of fodder maize cultivated under both pulse and continuous irrigation regimes in the dry and semiarid regions of Varamin, Iran. Additionally, we propose a novel logistic equation that permits LAI estimation across different irrigation treatments (60%, 80% and 100% water requirements) independent of GDD and plant height. Evaluations via the R 2 , RMSE and NSE indices demonstrated high accuracy in LAI estimation throughout the entire growth period, with the logistic model consistently outperforming the Gaussian model. Our results highlight the usefulness of LAI modelling for monitoring crop development and devising effective management strategies while emphasizing the importance of integrating advanced modelling techniques into agricultural management, especially in water‐scarce regions. These findings offer promising insights.
- 13 August 2025
- Published by Wiley in Irrigation and Drainage
- Vol. 74 (5) , 2267-2278
Logistic Modelling of Silage Maize LAI Dynamics Under Different Irrigation Regimes: A Strategy for Optimizing Crop Yield
The leaf area index (LAI) is a vital parameter in crop eco‐physiology because it substantially influences key processes such as evapotranspiration, light interception, photosynthesis and ultimately seed yield. Together with plant height, the LAI serves as a crucial indicator of crop growth and yield potential. Understanding the dynamic variations in LAI and developing reliable predictive models are essential for advancing research and improving agricultural practices. In this study, we employed a simple, experimentally validated logistic model driven by growing degree days (GDDs) to predict the LAI of fodder maize cultivated under both pulse and continuous irrigation regimes in the dry and semiarid regions of Varamin, Iran. Additionally, we propose a novel logistic equation that permits LAI estimation across different irrigation treatments (60%, 80% and 100% water requirements) independent of GDD and plant height. Evaluations via the R 2 , RMSE and NSE indices demonstrated high accuracy in LAI estimation throughout the entire growth period, with the logistic model consistently outperforming the Gaussian model. Our results highlight the usefulness of LAI modelling for monitoring crop development and devising effective management strategies while emphasizing the importance of integrating advanced modelling techniques into agricultural management, especially in water‐scarce regions. These findings offer promising insights.
- Open Access
- 3 February 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-29
A novel early stage drip irrigation system cost estimation model based on management and environmental variables
One of the most significant, intricate, and little-discussed aspects of pressurized irrigation is cost estimation. This study attempts to model the early-stage cost of the drip irrigation system using a database of 515 projects divided into four sections the cost of the pumping station and central control system (TCP), the cost of on-farm equipment (TCF), the cost of installation and operation on-farm and pumping station (TCI), and the total cost (TCT). First, 39 environmental and management features affecting the cost of the listed sectors were extracted for each of the 515 projects previously mentioned. A database (a matrix of 515 × 43) was created, and the costs of all projects were updated for the baseline year of 2022. Then, several feature selection algorithms, such as WCC, LCA, GA, PSO, ACO, ICA, LA, HTS, FOA, DSOS, and CUK, were employed to choose the most significant features that had the biggest influence on the system cost. The selection of features was carried out for all features (a total of 39 features) as well as for easily available features (those features that existed before the irrigation system’s design phase, 18 features). Then, different machine learning models such as Multivariate Linear Regression, Support Vector Regression, Artificial Neural Networks, Gene Expression Programming, Genetic Algorithms, Deep Learning, and Decision Trees, were used to estimate the costs of each of the of the aforementioned sections. Support vector machine (SVM) and optimization algorithms (Wrapper) were found to be the best learner and feature selection techniques, respectively, out of all the available feature selection algorithms. The two LCA and FOA algorithms produced the best estimation, according to the evaluation criteria results. Their RMSE for all features was 0.0020 and 0.0018, respectively, and their R2 was 0.94 and 0.94. For readily available features, these criteria were 0.0006 and 0.95 for both algorithms. In the part of the overall feature, the early-stage cost modeling with selected features revealed that the SVM model (with RBF Kernel) is the best model among the four cost sections discussed. Its evaluation criteria in the training stage are R2 = 0.923, RMSE = 0.008, and VE = 0.082; in the testing stage, they are R2 = 0.893, RMSE = 0.009, and VE = 0.102. The ANN model (MLP) was found to be the best model for a subset of features in the easily available feature part, with R2 = 0.912, RMSE = 0.008, and VE = 0.083 in the training stage and R2 = 0.882, RMSE = 0.009, and VE = 0.103 in the testing stage. The findings of this study can be utilized to highly accurately estimate the cost of local irrigation systems based on the recognized environmental and management parameters and by employing particular models.
- 3 February 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-29
Open AccessA novel early stage drip irrigation system cost estimation model based on management and environmental variables
One of the most significant, intricate, and little-discussed aspects of pressurized irrigation is cost estimation. This study attempts to model the early-stage cost of the drip irrigation system using a database of 515 projects divided into four sections the cost of the pumping station and central control system (TCP), the cost of on-farm equipment (TCF), the cost of installation and operation on-farm and pumping station (TCI), and the total cost (TCT). First, 39 environmental and management features affecting the cost of the listed sectors were extracted for each of the 515 projects previously mentioned. A database (a matrix of 515 × 43) was created, and the costs of all projects were updated for the baseline year of 2022. Then, several feature selection algorithms, such as WCC, LCA, GA, PSO, ACO, ICA, LA, HTS, FOA, DSOS, and CUK, were employed to choose the most significant features that had the biggest influence on the system cost. The selection of features was carried out for all features (a total of 39 features) as well as for easily available features (those features that existed before the irrigation system’s design phase, 18 features). Then, different machine learning models such as Multivariate Linear Regression, Support Vector Regression, Artificial Neural Networks, Gene Expression Programming, Genetic Algorithms, Deep Learning, and Decision Trees, were used to estimate the costs of each of the of the aforementioned sections. Support vector machine (SVM) and optimization algorithms (Wrapper) were found to be the best learner and feature selection techniques, respectively, out of all the available feature selection algorithms. The two LCA and FOA algorithms produced the best estimation, according to the evaluation criteria results. Their RMSE for all features was 0.0020 and 0.0018, respectively, and their R2 was 0.94 and 0.94. For readily available features, these criteria were 0.0006 and 0.95 for both algorithms. In the part of the overall feature, the early-stage cost modeling with selected features revealed that the SVM model (with RBF Kernel) is the best model among the four cost sections discussed. Its evaluation criteria in the training stage are R2 = 0.923, RMSE = 0.008, and VE = 0.082; in the testing stage, they are R2 = 0.893, RMSE = 0.009, and VE = 0.102. The ANN model (MLP) was found to be the best model for a subset of features in the easily available feature part, with R2 = 0.912, RMSE = 0.008, and VE = 0.083 in the training stage and R2 = 0.882, RMSE = 0.009, and VE = 0.103 in the testing stage. The findings of this study can be utilized to highly accurately estimate the cost of local irrigation systems based on the recognized environmental and management parameters and by employing particular models.
- 8 November 2024
- Published by Taylor & Francis in International Journal of Water Resources Development
- Vol. 41 (3) , 513-539
How to manage regime shifts: insights from a dryland social–ecological system
- 8 November 2024
- Published by Taylor & Francis in International Journal of Water Resources Development
- Vol. 41 (3) , 513-539
How to manage regime shifts: insights from a dryland social–ecological system
- 7 December 2023
- Published by Springer Nature in Water Conservation Science and Engineering
- Vol. 8 (1) , 1-13
Revealing Regime Shifts and Their Impact on Social-Ecological Systems: a Case Study on Iran
- 7 December 2023
- Published by Springer Nature in Water Conservation Science and Engineering
- Vol. 8 (1) , 1-13
Revealing Regime Shifts and Their Impact on Social-Ecological Systems: a Case Study on Iran
- 18 January 2021
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 14 (2) , 1-15
Impacts of droughts on rainfall use efficiency in different climatic zones and land uses in Iran
- 18 January 2021
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 14 (2) , 1-15
Impacts of droughts on rainfall use efficiency in different climatic zones and land uses in Iran
- 15 July 2019
- Published by Wiley in Irrigation and Drainage
- Vol. 68 (4) , 765-777
OPTIMIZATION OF THE CROPPING PATTERN OF MAIN CEREALS AND IMPROVING WATER PRODUCTIVITY: APPLICATION OF THE WATER FOOTPRINT CONCEPT
Different components of water footprint (WF) (green, blue, grey and white) and WF volume (WFV) were estimated for three main cereal crops in Iran (wheat, barley and maize) in the main cereal‐producing provinces. In order to classify the selected provinces according to their corresponding WFVs, hierarchical cluster analysis (HCA) was applied for clustering the WFV of maize, barley and wheat in irrigated and rainfed conditions. Then, the linear programming (LP) technique was used to determine the optimal cultivated area for cereals in order to minimize the total national WFV in irrigated and rainfed lands. The WFV of wheat, barley and maize production in irrigated lands were estimated to be 25 100, 5980 and 4610 Mm3 yr−1, respectively, under the current practice. The optimized values of WFV under irrigated conditions were 877, 338 and 374 Mm3 yr−1 lower than the current values, implying nearly 3.5, 5.7 and 8.1% achievable reductions. The reduction in rainfed lands was estimated to be 332 Mm3 yr−1 or 2.9% for wheat (from 11 300 to 11 000 Mm3 year−1) and 338 Mm3 yr−1 or 5.7% for barley (from 5950 to 5610 Mm3 yr−1). The results show that by optimizing the cultivated area of the main cereals in Iran, 2,210 Mm3 yr−1 or 4.5% of the national WFV could be saved. © 2019 John Wiley & Sons, Ltd.
- 15 July 2019
- Published by Wiley in Irrigation and Drainage
- Vol. 68 (4) , 765-777
OPTIMIZATION OF THE CROPPING PATTERN OF MAIN CEREALS AND IMPROVING WATER PRODUCTIVITY: APPLICATION OF THE WATER FOOTPRINT CONCEPT
Different components of water footprint (WF) (green, blue, grey and white) and WF volume (WFV) were estimated for three main cereal crops in Iran (wheat, barley and maize) in the main cereal‐producing provinces. In order to classify the selected provinces according to their corresponding WFVs, hierarchical cluster analysis (HCA) was applied for clustering the WFV of maize, barley and wheat in irrigated and rainfed conditions. Then, the linear programming (LP) technique was used to determine the optimal cultivated area for cereals in order to minimize the total national WFV in irrigated and rainfed lands. The WFV of wheat, barley and maize production in irrigated lands were estimated to be 25 100, 5980 and 4610 Mm3 yr−1, respectively, under the current practice. The optimized values of WFV under irrigated conditions were 877, 338 and 374 Mm3 yr−1 lower than the current values, implying nearly 3.5, 5.7 and 8.1% achievable reductions. The reduction in rainfed lands was estimated to be 332 Mm3 yr−1 or 2.9% for wheat (from 11 300 to 11 000 Mm3 year−1) and 338 Mm3 yr−1 or 5.7% for barley (from 5950 to 5610 Mm3 yr−1). The results show that by optimizing the cultivated area of the main cereals in Iran, 2,210 Mm3 yr−1 or 4.5% of the national WFV could be saved. © 2019 John Wiley & Sons, Ltd.