ВКВладимир Сергеевич Ключник

Владимир Сергеевич Ключник

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Владимир Сергеевич Ключник has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A method for determining the characteristics of the steady creep of a single crystal alloy

    by Mykhaylo Tkach, Sergey Kulishov, Vitalii Polischuk, Yurii Halynkin, Arkadіі Proskurin, Vladimir Kluchnyk

    A description of the stand based on a digital speckle interferometer with a diffuse reference wave and separated branches is given, which allows determining the natural frequencies and vibration modes of objects in real time. In the frequency range 100...4000 Hz, an experimental study of the vibration characteristics of a turbine rotor blade of a gas turbine engine was carried out, with rigid fastening of the blade fir tree part, which was achieved by fixing the blade in the lock and then fixing it in the clamping device. In the frequency range from 100 to 4000 Hz, 9 blade vibration modes were identified. The object of the study is the turbine rotor blade of a gas turbine engine with a height along the trailing edge of 288 mm and a chord in the middle section of 88.5 mm. A solid-state geometric model of a rotor blade based on a faceted body obtained from 3D scanning has been created. Concerning the frequency range 100...4000 Hz, using the ANSYS Workbench software package, a series of calculations of the resonant frequencies of the blade by the finite element method was carried out. Many vibration modes have been obtained, and the data obtained from experiments and calculations have been compared. The analysis of the spectrum of the natural vibration frequencies of the blade showed that the root-mean-square value of the deviations between the results obtained is 5.5% for the same modes. To verify the software calculation, the values of the resonance frequencies were recalculated using a three-dimensional model of the blade fixed in the lock. To determine the influence of the boundary conditions for fixing a gas turbine blade on its vibration characteristics, a series of calculations of the resonance frequencies and vibration modes of the blade model with cutting off a part of the blade at different heights was carried out. It is shown that cutting off the fir tree part of the blade root when modeling the boundary conditions of fixing makes it possible to simplify the calculation process by simplifying the geometry of the three-dimensional model of the blade under study, with a minimum loss of calculation accuracy.

  • Open Access

    Экспериментальное определение вибрационных характеристик рабочих лопаток турбин помехоустойчивым цифровым спекл-интерферометром

    by Михаил Романович Ткач, Юрий Григорьевич Золотой, Ирина Юрьевна Жук, Юрий Николаевич Галинкин, Аркадий Юрьевич Проскурин, Владимир Сергеевич Ключник

    The paper notes the wide possibilities and high efficiency of vibration diagnostics of parts and assemblies of power units by the method of electronic speckle interferometry (ESI), shows the feasibility of developing and improving methods for obtaining speckle interferograms of vibrating objects. A patented by the authors' scheme of a digital speckle interferometer (DSI) for determining the dynamic parameters of products is presented. The diffuse reference wave greatly simplifies its alignment, mainly the aligned channels of propagation of interfering beams determine the resistance to mechanical and thermal disturbances, and the separate beam splitter and diffuser make it easy to optimize the optical scheme for the object under study. Speckle interferograms are obtained by speckle correlation methods and a developed method for determining the contrast of the dynamic speckle pattern. It does not impose special requirements on the parameters of the video system, does not require the use of a specialized video camera, and allows, by using a rotary platform, to organize a panoramic view of the oscillatory forms of asymmetric structures. The use of this method in combination with the proposed optical scheme provides an express analysis of products in off-bench conditions. The increased noise immunity of the installation allows the determination of the spectrum of frequencies and vibration modes (SFVM) of samples under free boundary conditions, which is rarely realized in interferometry. The paper presents examples of such speckle interferograms, the expediency of obtaining which is important in the resonance study of the elastic properties of the material and vibration resonance flaw detection. The implemented software and hardware solutions increase the resolution and visibility of the band patterns; facilitate their quantitative interpretation and the extraction of numerical information on the distribution of vibration amplitudes. The area of scientific interests and the specificity of the author's developments have determined the preferential adaptation of the proposed device with a complex of software and methodological developments for vibration testing of gas turbine engine (GTE) blades.

  • Экспериментально-расчетное определение механических свойств материала рабочих лопаток ГТД

    by Михаил Романович Ткач, Сергей Борисович Кулишов, Виталий Анатольевич Полищук, Владимир Сергеевич Ключник, Юрий Григорьевич Золотой, Ирина Юрьевна Жук, Аркадий Юрьевич Проскурин, Юрий Николаевич Галынкин

    A schematic description of a stand based on a digital speckle interferometer with a diffuse reference wave is given, which makes it possible to determine the natural frequencies and vibration modes of the blades in real-time. In the frequency range of 100 ... 3000 Hz, an experimental study of the vibration characteristics of a turbine rotor blade of a gas turbine engine was carried out, under free boundary conditions, which were achieved by placing the blade on soft silicone racks. Blade dimensions: height along the trailing edge - 288 mm, a chord in the middle section - 88.5 mm. 7 modes of vibrations have been identified. The technology of creating a solid-state geometric model of a rotor blade based on a faceted body obtained by 3D scanning with an accuracy of 0.01 mm is presented. The finite element method, using the Lagrange variation principle, is used to calculate the values of natural frequencies and vibration modes of a blade based on the developed geometric model. Concerning the frequency range 100 ... 3000 Hz, using the Ansys Workbench software package, a series of calculations of the resonant frequencies of the blade, by the finite element method, in the range of variation of the values of mechanical properties was carried out: Young's modulus E = 200 ... 230 GPa; Poisson's ratio μ = 0.26 ... 0.3. The density of the material: ρ = 7830 kg / m³, determined experimentally, by the method of hydrostatic weighing. The final element used in the calculation is (tetrahedron) SOLID 187; the minimum element size is 0.6 mm. The total number of elements is about 1.5 ∙ 10⁶. Based on the two-dimensional spline interpolation of the calculated data, the dependence of the standard deviation of the calculated and experimental values on the adopted mechanical properties of the material of the rotor blade is built. In the range of values E = 215 ... 217 GPa and μ = 0.295 ... 0.3, the minimum standard deviation of the calculated frequencies from their experimental values is 0.73%. Provided the value of the standard deviation of frequencies is 1%, the range of values of mechanical properties will be: E = 211 ... 220 GPa and μ = 0.26 ... 0.3. It is shown that narrowing the studied range of values of Young's modulus and Poisson's ratio does not significantly affect the results obtained.

  • Improving the Noise Immunity of the Measuring and Computing Coherent-Optical Vibrodiagnostic Complex

    by Mykhaylo Tkach, Yuri Zolotoy, Yurii Halynkin, Arkadii Proskurin, Irina Zhuk, Volodymyr Kluchnyk, Igor Bobylev