Gyojic Shin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gyojic Shin has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
Jeong Ju Baek
Green Circulation R&D Department, Research Institute of Sustainable Development Technology, Korea Institute of Industrial Technology (KITECH), Cheonan-si, Republic of South Korea
5 shared publications- Kyung Ho Choi
Green and Sustainable Materials R&D Department, Korea Institute of Industrial Technology, Cheonan 31056, Korea
5 shared publications - Won-Gun Koh
Department of Chemical and Biomolecular Engineering Yonsei University Seoul South Korea
4 shared publications Geun Yeol Bae
Kumoh Natl Inst Technol, Dept Mat Design Engn, Gumi 39177, South Korea
3 shared publications- Jeong Ho Cho
Department of Chemical and Biomolecular Engineering, Yonsei University, Seoul 03722, Republic of Korea
3 shared publications - Jeong Ju Baek
Green Circulation R&D Department, Research Institute of Sustainable Development Technology, Korea Institute of Industrials Technology (KITECH), Yangdaegiro-gil 89, Ipjang-myeon, Cheonan-si 31056, Republic of Korea
3 shared publications
Latest Publications
- Open Access
- 26 May 2026
- Published by Elsevier in SSRN Electronic Journal
Interfacial charge transfer at an unconventional Au-Ni shell–support junction on perovskite catalysts toward environmental application of durable low-temperature CO and toluene oxidation
Efficient low-temperature oxidation of carbon monoxide (CO) and volatile organic compounds (VOCs) is critically important for energy-efficient air purification and industrial emission control. Precise control of interfacial electron distribution is essential for durable low-temperature catalysis. However, conventional metal-oxide catalyst systems still struggle to sustain polarized active sites under realistic reaction environments. Here, we report an unconventional shell–support junction within Au–Ni core–shell nanoparticles (NPs) anchored on nanofibrous perovskite as an environmental catalyst, through a surface interactive assembly of loaded Au and exsolved Ni species. Direct coupling of an ultrathin Au shell with the oxide surface induces interfacial charge redistribution through strengthened electronic metal–support interactions (EMSI), stabilizing electron-rich Au- sites under oxidative conditions. The resulting polarized interface promotes π-backdonation-mediated adsorption regulation, enabling balanced adsorption–desorption behavior and suppressing the accumulation of strongly adsorbed surface intermediates during catalytic oxidation. The optimized catalyst delivers threefold higher CO turnover frequency, stable 50 h operation, and an activation energy of ≈ 40 kJ mol-1 for toluene oxidation, comparably outperforming the conventional reference and even reported catalysts. These findings establish shell–support interfacial polarization as a key strategy for designing durable oxidation catalysts that provide a sustainable solution for energy-efficient environmental catalysis.
- 26 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessInterfacial charge transfer at an unconventional Au-Ni shell–support junction on perovskite catalysts toward environmental application of durable low-temperature CO and toluene oxidation
Efficient low-temperature oxidation of carbon monoxide (CO) and volatile organic compounds (VOCs) is critically important for energy-efficient air purification and industrial emission control. Precise control of interfacial electron distribution is essential for durable low-temperature catalysis. However, conventional metal-oxide catalyst systems still struggle to sustain polarized active sites under realistic reaction environments. Here, we report an unconventional shell–support junction within Au–Ni core–shell nanoparticles (NPs) anchored on nanofibrous perovskite as an environmental catalyst, through a surface interactive assembly of loaded Au and exsolved Ni species. Direct coupling of an ultrathin Au shell with the oxide surface induces interfacial charge redistribution through strengthened electronic metal–support interactions (EMSI), stabilizing electron-rich Au- sites under oxidative conditions. The resulting polarized interface promotes π-backdonation-mediated adsorption regulation, enabling balanced adsorption–desorption behavior and suppressing the accumulation of strongly adsorbed surface intermediates during catalytic oxidation. The optimized catalyst delivers threefold higher CO turnover frequency, stable 50 h operation, and an activation energy of ≈ 40 kJ mol-1 for toluene oxidation, comparably outperforming the conventional reference and even reported catalysts. These findings establish shell–support interfacial polarization as a key strategy for designing durable oxidation catalysts that provide a sustainable solution for energy-efficient environmental catalysis.
- 14 March 2026
- Published by Springer Nature in Journal of Materials Science
- Vol. 61 (16) , 11450-11465
Hard and flexible UV-curable self-healing ladder-like polysilsesquioxane coatings for optically clear flexible displays
- 14 March 2026
- Published by Springer Nature in Journal of Materials Science
- Vol. 61 (16) , 11450-11465
Hard and flexible UV-curable self-healing ladder-like polysilsesquioxane coatings for optically clear flexible displays
- Open Access
- 9 November 2024
- Published by Elsevier in Chemical Engineering Journal Advances
- Vol. 20
Fabrication and characterization of UV-curable thiol-functionalized siloxane elastomers with enhanced adhesion for flexible substrates
- 9 November 2024
- Published by Elsevier in Chemical Engineering Journal Advances
- Vol. 20
Open AccessFabrication and characterization of UV-curable thiol-functionalized siloxane elastomers with enhanced adhesion for flexible substrates
- Open Access
Influence of Thiol-Functionalized Polysilsesquioxane/Phosphorus Flame-Retardant Blends on the Flammability and Thermal, Mechanical, and Volatile Organic Compound (VOC) Emission Properties of Epoxy Resins
In this study, thiol-functionalized ladder-like polysesquioxanes end-capped with methyl and phenyl groups were synthesized via a simple sol-gel method and characterized through gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), and thermogravimetric analysis (TGA). Additionally, epoxy blends of different formulations were prepared. Their structural, flame-retardant, thermal, and mechanical properties, as well as volatile organic compound (VOC) emissions, were determined using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), TGA, scanning electron microscopy (SEM), limiting oxygen index (LOI), cone calorimetry, and a VOC analyzer. Compared to epoxy blends with flame retardants containing elemental phosphorus alone, those with flame retardants containing elemental phosphorus combined with silicon and sulfur exhibited superior thermal, flame-retardant, and mechanical properties with low VOC emissions. SEM of the residual char revealed a dense and continuous morphology without holes or cracks. In particular, LOI values for the combustion of methyl and phenyl end-capped polysilsesquioxane mixtures were 32.3 and 33.7, respectively, compared to 28.4% of the LOI value for the blends containing only phosphorus compounds. The silicon–sulfur–phosphorus-containing blends displayed reduced flammability concerning the blends using a flame retardant containing only phosphorus. This reflects the cooperative effects of various flame-retardant moieties.
Open AccessInfluence of Thiol-Functionalized Polysilsesquioxane/Phosphorus Flame-Retardant Blends on the Flammability and Thermal, Mechanical, and Volatile Organic Compound (VOC) Emission Properties of Epoxy Resins
In this study, thiol-functionalized ladder-like polysesquioxanes end-capped with methyl and phenyl groups were synthesized via a simple sol-gel method and characterized through gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), and thermogravimetric analysis (TGA). Additionally, epoxy blends of different formulations were prepared. Their structural, flame-retardant, thermal, and mechanical properties, as well as volatile organic compound (VOC) emissions, were determined using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), TGA, scanning electron microscopy (SEM), limiting oxygen index (LOI), cone calorimetry, and a VOC analyzer. Compared to epoxy blends with flame retardants containing elemental phosphorus alone, those with flame retardants containing elemental phosphorus combined with silicon and sulfur exhibited superior thermal, flame-retardant, and mechanical properties with low VOC emissions. SEM of the residual char revealed a dense and continuous morphology without holes or cracks. In particular, LOI values for the combustion of methyl and phenyl end-capped polysilsesquioxane mixtures were 32.3 and 33.7, respectively, compared to 28.4% of the LOI value for the blends containing only phosphorus compounds. The silicon–sulfur–phosphorus-containing blends displayed reduced flammability concerning the blends using a flame retardant containing only phosphorus. This reflects the cooperative effects of various flame-retardant moieties.
- Open Access
Effect of Synthetic Low-Odor Thiol-Based Hardeners Containing Hydroxyl and Methyl Groups on the Curing Behavior, Thermal, and Mechanical Properties of Epoxy Resins
A novel thiol-functionalized polysilsesqioxane containing hydroxyl and methyl groups was synthesized using a simple acid-catalyzed sol–gel method to develop an epoxy hardener with low odor, low volatile organic compound (VOC) emissions, and fast curing at low temperatures. The synthesized thiol-based hardeners were characterized using Fourier transform infrared spectroscopy, nuclear magnetic resonance, thermogravimetric analysis (TGA), and gel permeation chromatography and compared with commercially available hardeners in terms of odor intensity and VOC emissions using the air dilution olfaction method and VOC analysis. The curing behavior and thermal and mechanical properties of the epoxy compounds prepared with the synthesized thiol-based hardeners were also evaluated. The results showed that synthetic thiol-based hardeners containing methyl and hydroxyl groups initiated the curing reaction of epoxy compounds at 53 °C and 45 °C, respectively. In contrast, commercial thiol-based hardeners initiated the curing reaction at 67 °C. Additionally, epoxy compounds with methyl-containing synthetic thiol-based hardeners exhibited higher TGA at a 5% weight loss temperature (>50 °C) and lap shear strength (20%) than those of the epoxy compounds with commercial thiol-based hardeners.
Open AccessEffect of Synthetic Low-Odor Thiol-Based Hardeners Containing Hydroxyl and Methyl Groups on the Curing Behavior, Thermal, and Mechanical Properties of Epoxy Resins
A novel thiol-functionalized polysilsesqioxane containing hydroxyl and methyl groups was synthesized using a simple acid-catalyzed sol–gel method to develop an epoxy hardener with low odor, low volatile organic compound (VOC) emissions, and fast curing at low temperatures. The synthesized thiol-based hardeners were characterized using Fourier transform infrared spectroscopy, nuclear magnetic resonance, thermogravimetric analysis (TGA), and gel permeation chromatography and compared with commercially available hardeners in terms of odor intensity and VOC emissions using the air dilution olfaction method and VOC analysis. The curing behavior and thermal and mechanical properties of the epoxy compounds prepared with the synthesized thiol-based hardeners were also evaluated. The results showed that synthetic thiol-based hardeners containing methyl and hydroxyl groups initiated the curing reaction of epoxy compounds at 53 °C and 45 °C, respectively. In contrast, commercial thiol-based hardeners initiated the curing reaction at 67 °C. Additionally, epoxy compounds with methyl-containing synthetic thiol-based hardeners exhibited higher TGA at a 5% weight loss temperature (>50 °C) and lap shear strength (20%) than those of the epoxy compounds with commercial thiol-based hardeners.
- 3 January 2022
- Published by Springer Nature in Journal of Materials Science
- Vol. 57 (1) , 254-273
Intense pulsed UV light treatment to design functional optical films from perhydropolysilazane: an alternative to conventional heat treatment processes
- 3 January 2022
- Published by Springer Nature in Journal of Materials Science
- Vol. 57 (1) , 254-273
Intense pulsed UV light treatment to design functional optical films from perhydropolysilazane: an alternative to conventional heat treatment processes
- Open Access
- 27 October 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (11) , 2865
Self-Patterned Stretchable Electrode Based on Silver Nanowire Bundle Mesh Developed by Liquid Bridge Evaporation
A new strategy is required to realize a low-cost stretchable electrode while realizing high stretchability, conductivity, and manufacturability. In this study, we fabricated a self-patterned stretchable electrode using a simple and scalable process. The stretchable electrode is composed of a bridged square-shaped (BSS) AgNW bundle mesh developed by liquid bridge evaporation and a stretchable polymer matrix patterned with a microcavity array. Owing to the BSS structure and microcavity array, which effectively concentrate the applied strain on the deformable square region of the BSS structure under tensile stretching, the stretchable electrode exhibits high stretchability with a low ΔR/R0 of 10.3 at a strain of 40%. Furthermore, by exploiting the self-patterning ability—attributable to the difference in the ability to form liquid bridges according to the distance between microstructures—we successfully demonstrated a stretchable AgNW bundle mesh with complex patterns without using additional patterning processes. In particular, stretchable electrodes were fabricated by spray coating and bar coating, which are widely used in industry for low-cost mass production. We believe that this study significantly contributes to the commercialization of stretchable electronics while achieving high performance and complex patterns, such as stretchable displays and electronic skin.
- 27 October 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (11) , 2865
Open AccessSelf-Patterned Stretchable Electrode Based on Silver Nanowire Bundle Mesh Developed by Liquid Bridge Evaporation
A new strategy is required to realize a low-cost stretchable electrode while realizing high stretchability, conductivity, and manufacturability. In this study, we fabricated a self-patterned stretchable electrode using a simple and scalable process. The stretchable electrode is composed of a bridged square-shaped (BSS) AgNW bundle mesh developed by liquid bridge evaporation and a stretchable polymer matrix patterned with a microcavity array. Owing to the BSS structure and microcavity array, which effectively concentrate the applied strain on the deformable square region of the BSS structure under tensile stretching, the stretchable electrode exhibits high stretchability with a low ΔR/R0 of 10.3 at a strain of 40%. Furthermore, by exploiting the self-patterning ability—attributable to the difference in the ability to form liquid bridges according to the distance between microstructures—we successfully demonstrated a stretchable AgNW bundle mesh with complex patterns without using additional patterning processes. In particular, stretchable electrodes were fabricated by spray coating and bar coating, which are widely used in industry for low-cost mass production. We believe that this study significantly contributes to the commercialization of stretchable electronics while achieving high performance and complex patterns, such as stretchable displays and electronic skin.
- 18 January 2021
- Published by Wiley in Journal of Polymer Science
- Vol. 59 (4) , 340-352
The improved photosensitivity of photosensitive polyimides containing o‐nitrobenzyl ether groups induced by the addition of photoacid generator
In this article, photosensitive polyimides (PSPIs) with photosensitive groups, o‐nitrobenzyl ether groups (Nb), were successfully synthesized based on 2,2′‐dihydroxy benzophenone‐3,3′,4,4′‐tetracarboxylic dianhydride and on diamine containing ethylene glycol chains (ODA). Also, a series of polyimide (PI), ODA‐1‐PI, ODA‐3‐PI, and ODA‐5‐PI with a number of ethylene glycol chains of 1, 3, and 5 were prepared to investigate the relationship between structure and solubility. Interestingly, ODA‐5‐PI, which possesses a large number of ethylene glycols, exhibited the most excellent solubility. Therefore, due to the good solubility of ODA‐5‐PI in organic solvents and alkaline solutions, a PSPI, poly(1,4‐phenyleneoxy‐3,6,9,12,15‐pentaoxaoctane‐1,4‐phenylene‐2,2′‐di[2‐nitrobenzyloxy]benzophenone‐3,3′,4,4′‐tetracarboxdiimide), named ODA‐5‐PSPI, was synthesized by linking Nb, which is a photosensitive group. Aiming at producing positive tone patterns, the synthesized ODA‐5‐PSPI was exposed to UV irradiation and then to a post‐exposure bake. Afterward, it was developed using a 2.38 wt% tetramethylammonium hydroxide solution. Furthermore, a photoacid generator (PAG) was additionally incorporated for a micropatterning process. Notably, in the presence of the PAG, the photocleavage of ODA‐5‐PSPI occurred not only by the intramolecular rearrangement of Nb but also by its hydrolysis reaction. As a result, due to the synergistic effect of photocleavage, the micropatterning of ODA‐5‐PSPI with PAG could be clearly obtained with less energy (2.0 J/cm2) compared with that without PAG (3.6 J/cm2). Therefore, through the addition of PAG, the photosensitivity was improved by 45%.
- 18 January 2021
- Published by Wiley in Journal of Polymer Science
- Vol. 59 (4) , 340-352
The improved photosensitivity of photosensitive polyimides containing o‐nitrobenzyl ether groups induced by the addition of photoacid generator
In this article, photosensitive polyimides (PSPIs) with photosensitive groups, o‐nitrobenzyl ether groups (Nb), were successfully synthesized based on 2,2′‐dihydroxy benzophenone‐3,3′,4,4′‐tetracarboxylic dianhydride and on diamine containing ethylene glycol chains (ODA). Also, a series of polyimide (PI), ODA‐1‐PI, ODA‐3‐PI, and ODA‐5‐PI with a number of ethylene glycol chains of 1, 3, and 5 were prepared to investigate the relationship between structure and solubility. Interestingly, ODA‐5‐PI, which possesses a large number of ethylene glycols, exhibited the most excellent solubility. Therefore, due to the good solubility of ODA‐5‐PI in organic solvents and alkaline solutions, a PSPI, poly(1,4‐phenyleneoxy‐3,6,9,12,15‐pentaoxaoctane‐1,4‐phenylene‐2,2′‐di[2‐nitrobenzyloxy]benzophenone‐3,3′,4,4′‐tetracarboxdiimide), named ODA‐5‐PSPI, was synthesized by linking Nb, which is a photosensitive group. Aiming at producing positive tone patterns, the synthesized ODA‐5‐PSPI was exposed to UV irradiation and then to a post‐exposure bake. Afterward, it was developed using a 2.38 wt% tetramethylammonium hydroxide solution. Furthermore, a photoacid generator (PAG) was additionally incorporated for a micropatterning process. Notably, in the presence of the PAG, the photocleavage of ODA‐5‐PSPI occurred not only by the intramolecular rearrangement of Nb but also by its hydrolysis reaction. As a result, due to the synergistic effect of photocleavage, the micropatterning of ODA‐5‐PSPI with PAG could be clearly obtained with less energy (2.0 J/cm2) compared with that without PAG (3.6 J/cm2). Therefore, through the addition of PAG, the photosensitivity was improved by 45%.
- Open Access
- 23 January 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (6) , 3169-3175
Intense-pulsed-UV-converted perhydropolysilazane gate dielectrics for organic field-effect transistors and logic gates
We fabricated a high-quality perhydropolysilazane (PHPS)-derived SiO2 film by intense pulsed UV irradiation and applied it as a gate dielectric layer in high-performance organic field-effect transistors (OFETs) and complementary inverters.
- 23 January 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (6) , 3169-3175
Open AccessIntense-pulsed-UV-converted perhydropolysilazane gate dielectrics for organic field-effect transistors and logic gates
We fabricated a high-quality perhydropolysilazane (PHPS)-derived SiO2 film by intense pulsed UV irradiation and applied it as a gate dielectric layer in high-performance organic field-effect transistors (OFETs) and complementary inverters.
- Open Access
- 11 June 2014
- Published by Springer Nature in Discover Nano
- Vol. 9 (1) , 294
Facile fabrication of high-efficiency near-infrared absorption film with tungsten bronze nanoparticle dense layer
An excellent transparent film with effective absorption property in near-infrared (NIR) region based on cesium-doped tungsten oxide nanoparticles was fabricated using a facile double layer coating method via the theoretical considerations. The optical performance was evaluated; the double layer-coated film exhibited 10% transmittance at 1,000 nm in the NIR region and over 80% transmittance at 550 nm in the visible region. To optimize the selectivity, the optical spectrum of this film was correlated with a theoretical model by combining the contributions of the Mie-Gans absorption-based localized surface plasmon resonance and reflections by the interfaces of the heterogeneous layers and the nanoparticles in the film. Through comparison of the composite and double layer coating method, the difference of the nanoscale distances between nanoparticles in each layer was significantly revealed. It is worth noting that the nanodistance between the nanoparticles decreased in the double layer film, which enhanced the optical properties of the film, yielding a haze value of 1% or less without any additional process. These results are very attractive for the nanocomposite coating process, which would lead to industrial fields of NIR shielding and thermo-medical applications. 78.67.Sc; 78.67.Bf; 81.15.-z
- 11 June 2014
- Published by Springer Nature in Discover Nano
- Vol. 9 (1) , 294
Open AccessFacile fabrication of high-efficiency near-infrared absorption film with tungsten bronze nanoparticle dense layer
An excellent transparent film with effective absorption property in near-infrared (NIR) region based on cesium-doped tungsten oxide nanoparticles was fabricated using a facile double layer coating method via the theoretical considerations. The optical performance was evaluated; the double layer-coated film exhibited 10% transmittance at 1,000 nm in the NIR region and over 80% transmittance at 550 nm in the visible region. To optimize the selectivity, the optical spectrum of this film was correlated with a theoretical model by combining the contributions of the Mie-Gans absorption-based localized surface plasmon resonance and reflections by the interfaces of the heterogeneous layers and the nanoparticles in the film. Through comparison of the composite and double layer coating method, the difference of the nanoscale distances between nanoparticles in each layer was significantly revealed. It is worth noting that the nanodistance between the nanoparticles decreased in the double layer film, which enhanced the optical properties of the film, yielding a haze value of 1% or less without any additional process. These results are very attractive for the nanocomposite coating process, which would lead to industrial fields of NIR shielding and thermo-medical applications. 78.67.Sc; 78.67.Bf; 81.15.-z