Franziska Wenz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Franziska Wenz has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
Alexander Leichner
Flow and Material Simulation Fraunhofer Institute for Industrial Mathematics (ITWM) Kaiserslautern Germany
3 shared publications- Heiko Andrä
Fraunhofer ITWM Kaiserslautern Germany
3 shared publications - Chris Eberl
Fraunhofer Institute for Mechanics of Materials (IWM) Wöhlerstr. 11 79108 Freiburg Germany
2 shared publications Christoph Eberl
Component Safety and Lightweight Construction Fraunhofer Institute for Mechanics of Materials (IWM) 79108 Freiburg Germany
2 shared publications- Thorsten Pretsch
Fraunhofer IAP Potsdam Nord Germany
2 shared publications - Alexander Leichner
Fraunhofer Institute for Industrial Mathematics
1 shared publication
Latest Publications
- Open Access
- 30 August 2026
- Published by Wiley in Advanced Engineering Materials
- Vol. 28 (21) , e71214
Design of a Multistable Finger Prosthesis with Programmable Metamaterials
Shape change, as well as the ability to maintain a prescribed deformation, are main requirements for passive finger prostheses. These functionalities are realized by screwed hinges with latching elements. Programmable metamaterials, consisting of structured monomaterials and overtaking several functions simultaneously, can be used to improve prosthesis design by offering a non‐assembly and sustainable approach. The study presents the design of a programmable metamaterial that combines a bending with a multistable structure that can bent up to 90° with stable shapes at 30° steps. The shape changes are activated by applying mechanical force and can be held without energy consumption. Polymeric base materials (thermoplastic‐urethane, thermoplastic‐copolymers) processed by additive manufacturing to achieve the necessary large deformations are used and described numerically with hyperelastic models. A hierarchically structured demonstrator was constructed and produced by filament printing, showing the desired behavior with 16 stable shapes. Experiments show a good accuracy to reach the targeted bending angles of 30°, 60°, and 90° (deviation ≤ 6.5°) and a high reproducibility (standard deviation < 2°).
- 30 August 2026
- Published by Wiley in Advanced Engineering Materials
- Vol. 28 (21) , e71214
Open AccessDesign of a Multistable Finger Prosthesis with Programmable Metamaterials
Shape change, as well as the ability to maintain a prescribed deformation, are main requirements for passive finger prostheses. These functionalities are realized by screwed hinges with latching elements. Programmable metamaterials, consisting of structured monomaterials and overtaking several functions simultaneously, can be used to improve prosthesis design by offering a non‐assembly and sustainable approach. The study presents the design of a programmable metamaterial that combines a bending with a multistable structure that can bent up to 90° with stable shapes at 30° steps. The shape changes are activated by applying mechanical force and can be held without energy consumption. Polymeric base materials (thermoplastic‐urethane, thermoplastic‐copolymers) processed by additive manufacturing to achieve the necessary large deformations are used and described numerically with hyperelastic models. A hierarchically structured demonstrator was constructed and produced by filament printing, showing the desired behavior with 16 stable shapes. Experiments show a good accuracy to reach the targeted bending angles of 30°, 60°, and 90° (deviation ≤ 6.5°) and a high reproducibility (standard deviation < 2°).
- 24 September 2024
- Published by Springer Nature
- p. 203-215
Optimal Design of Programmable Mechanical Metamaterials
- 24 September 2024
- Published by Springer Nature
- p. 203-215
Optimal Design of Programmable Mechanical Metamaterials
- Open Access
- 25 June 2024
- Published by Elsevier in Materials & Design
- Vol. 244
Exploring VAE-driven implicit parametric unit cells for multiscale topology optimization
- 25 June 2024
- Published by Elsevier in Materials & Design
- Vol. 244
Open AccessExploring VAE-driven implicit parametric unit cells for multiscale topology optimization
- Open Access
- 30 July 2022
- Published by Wiley in Advanced Engineering Materials
- Vol. 25 (3)
Controlling Malleability of Metamaterials through Programmable Memory
Malleability, the ability to adapt materials to specific shapes, is necessary in applications where a form closure is requested. The material should be easily deformable between desired stable shapes. Such stability can be obtained through bistable elements that act as memory in metamaterials. Herein, a material with memory behavior programmed by the local temperature is presented. The behavior can be switched between a permanent shape change and a complete elastic recovery after removing an applied mechanical load. Additionally, a deformed material can be forced to recover its shape by heating. Through an adaption of the mesostructure and the used polymers, the characteristic behavior (switching time and temperature) can be adjusted. Furthermore, heating can be applied locally that only certain parts are able to change. A unit cell design based on analytical and numerical analyses is demonstrated that considers not only the mesostructure but also the combination of polymeric materials with specific thermoresponsive mechanical behavior. Unit cells and structures of several cells are additively manufactured to validate the programmable behavior. The concept is extended to indirect heating with an alternating magnetic field, using a compound made from a polymeric material and magnetic particles.
- 30 July 2022
- Published by Wiley in Advanced Engineering Materials
- Vol. 25 (3)
Open AccessControlling Malleability of Metamaterials through Programmable Memory
Malleability, the ability to adapt materials to specific shapes, is necessary in applications where a form closure is requested. The material should be easily deformable between desired stable shapes. Such stability can be obtained through bistable elements that act as memory in metamaterials. Herein, a material with memory behavior programmed by the local temperature is presented. The behavior can be switched between a permanent shape change and a complete elastic recovery after removing an applied mechanical load. Additionally, a deformed material can be forced to recover its shape by heating. Through an adaption of the mesostructure and the used polymers, the characteristic behavior (switching time and temperature) can be adjusted. Furthermore, heating can be applied locally that only certain parts are able to change. A unit cell design based on analytical and numerical analyses is demonstrated that considers not only the mesostructure but also the combination of polymeric materials with specific thermoresponsive mechanical behavior. Unit cells and structures of several cells are additively manufactured to validate the programmable behavior. The concept is extended to indirect heating with an alternating magnetic field, using a compound made from a polymeric material and magnetic particles.
- Open Access
- 2 August 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (37) , 2008617
Designing Shape Morphing Behavior through Local Programming of Mechanical Metamaterials
Shape morphing implicates that a specific condition leads to a morphing reaction. The material thus transforms from one shape to another in a predefined manner. In this paper, not only the target shape but rather the evolution of the material's shape as a function of the applied strain is programmed. To rationalize the design process, concepts from informatics (processing functions, for example, Poisson's ratio (PR) as function of strain: ν = f(ε) and if‐then‐else conditions) will be introduced. Three types of shape morphing behavior will be presented: (1) achieving a target shape by linearly increasing the amplitude of the shape, (2) filling up a target shape in linear steps, and (3) shifting a bulge through the material to a target position. In the first case, the shape is controlled by a geometric gradient within the material. The filling kind of behavior was implemented by logical operations. Moreover, programming moving hillocks (3) requires to implement a sinusoidal function εy = sin (εx) and an if‐then‐else statement into the unit cells combined with a global stiffness gradient. The three cases will be used to show how the combination of mechanical mechanisms as well as the related parameter distribution enable a programmable shape morphing behavior in an inverse design process.
- 2 August 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (37) , 2008617
Open AccessDesigning Shape Morphing Behavior through Local Programming of Mechanical Metamaterials
Shape morphing implicates that a specific condition leads to a morphing reaction. The material thus transforms from one shape to another in a predefined manner. In this paper, not only the target shape but rather the evolution of the material's shape as a function of the applied strain is programmed. To rationalize the design process, concepts from informatics (processing functions, for example, Poisson's ratio (PR) as function of strain: ν = f(ε) and if‐then‐else conditions) will be introduced. Three types of shape morphing behavior will be presented: (1) achieving a target shape by linearly increasing the amplitude of the shape, (2) filling up a target shape in linear steps, and (3) shifting a bulge through the material to a target position. In the first case, the shape is controlled by a geometric gradient within the material. The filling kind of behavior was implemented by logical operations. Moreover, programming moving hillocks (3) requires to implement a sinusoidal function εy = sin (εx) and an if‐then‐else statement into the unit cells combined with a global stiffness gradient. The three cases will be used to show how the combination of mechanical mechanisms as well as the related parameter distribution enable a programmable shape morphing behavior in an inverse design process.
- Open Access
Actuating Shape Memory Polymer for Thermoresponsive Soft Robotic Gripper and Programmable Materials
For soft robotics and programmable metamaterials, novel approaches are required enabling the design of highly integrated thermoresponsive actuating systems. In the concept presented here, the necessary functional component was obtained by polymer syntheses. First, poly(1,10-decylene adipate) diol (PDA) with a number average molecular weight Mn of 3290 g·mol−1 was synthesized from 1,10-decanediol and adipic acid. Afterward, the PDA was brought to reaction with 4,4′-diphenylmethane diisocyanate and 1,4-butanediol. The resulting polyester urethane (PEU) was processed to the filament, and samples were additively manufactured by fused-filament fabrication. After thermomechanical treatment, the PEU reliably actuated under stress-free conditions by expanding on cooling and shrinking on heating with a maximum thermoreversible strain of 16.1%. Actuation stabilized at 12.2%, as verified in a measurement comprising 100 heating-cooling cycles. By adding an actuator element to a gripper system, a hen’s egg could be picked up, safely transported and deposited. Finally, one actuator element each was built into two types of unit cells for programmable materials, thus enabling the design of temperature-dependent behavior. The approaches are expected to open up new opportunities, e.g., in the fields of soft robotics and shape morphing.
Open AccessActuating Shape Memory Polymer for Thermoresponsive Soft Robotic Gripper and Programmable Materials
For soft robotics and programmable metamaterials, novel approaches are required enabling the design of highly integrated thermoresponsive actuating systems. In the concept presented here, the necessary functional component was obtained by polymer syntheses. First, poly(1,10-decylene adipate) diol (PDA) with a number average molecular weight Mn of 3290 g·mol−1 was synthesized from 1,10-decanediol and adipic acid. Afterward, the PDA was brought to reaction with 4,4′-diphenylmethane diisocyanate and 1,4-butanediol. The resulting polyester urethane (PEU) was processed to the filament, and samples were additively manufactured by fused-filament fabrication. After thermomechanical treatment, the PEU reliably actuated under stress-free conditions by expanding on cooling and shrinking on heating with a maximum thermoreversible strain of 16.1%. Actuation stabilized at 12.2%, as verified in a measurement comprising 100 heating-cooling cycles. By adding an actuator element to a gripper system, a hen’s egg could be picked up, safely transported and deposited. Finally, one actuator element each was built into two types of unit cells for programmable materials, thus enabling the design of temperature-dependent behavior. The approaches are expected to open up new opportunities, e.g., in the fields of soft robotics and shape morphing.