Yuxing Bai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yuxing Bai has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Haiping Zhang
School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China
3 shared publications - Hui Zhang
School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006, China
3 shared publications - Jesse Zhu
Department of Chemical and Biochemical Engineering, The University of Western Ontario, London, ON N6A 5B9, Canada
3 shared publications - Yuanyuan Shao
University of Nottingham Ningbo China
3 shared publications - Aiming Yin
Datang North China Electric Power Test and Research Institute, Beijing 100043, China
2 shared publications - Bin Yuan
Datang North China Electric Power Test and Research Institute, Beijing 100043, China
2 shared publications
Latest Publications
- Open Access
Comparative Study of Carbonaceous and Polymer Conductive Additives on Anticorrosion Performance of Epoxy Zinc-Rich Primer
Zinc-rich primers are among the most promising organic coating systems for improving the corrosion resistance of metals in the marine environment. However, the high zinc content results in poor coating adhesion, high cost, insecurity and pollution. To decrease the zinc dust content, the carbonaceous and polymer conductive additives carbon black (CB), conductive graphite (CG), multiwalled carbon nanotubes (MWCNT) and polyaniline (PANI) were introduced to partially replace the zinc dust in the primers. A comparative study of the anticorrosion performance of epoxy zinc-rich primer (ZRP) is presented herein to systematically discuss and elaborate on the effects of the different conductive additives. There were no blisters, rust or corrosion products presented on the coatings of the CB-modified series due to the good dispersion and conductivity of nanosized CB clusters, while the zinc corrosion products covered the surface of the MWCNT-modified series samples, which was attributed to the excessive electrical conductivity resulting in high consumption of zinc powder. The lamellar CG provided an additional blocking barrier for the coatings based on the maze effect. The transition from the intrinsic state to the doped state of PANI resulted in corrosion protection for the coatings depending on the cathodic and barrier function. The experimental results suggested that the formula with 2 wt.% CB and 67 wt.% zinc dust had the most promising anticorrosion properties, which was also demonstrated by the high Rct and low CPEdl values calculated according to the equivalent electrical circuit analyses.
Open AccessComparative Study of Carbonaceous and Polymer Conductive Additives on Anticorrosion Performance of Epoxy Zinc-Rich Primer
Zinc-rich primers are among the most promising organic coating systems for improving the corrosion resistance of metals in the marine environment. However, the high zinc content results in poor coating adhesion, high cost, insecurity and pollution. To decrease the zinc dust content, the carbonaceous and polymer conductive additives carbon black (CB), conductive graphite (CG), multiwalled carbon nanotubes (MWCNT) and polyaniline (PANI) were introduced to partially replace the zinc dust in the primers. A comparative study of the anticorrosion performance of epoxy zinc-rich primer (ZRP) is presented herein to systematically discuss and elaborate on the effects of the different conductive additives. There were no blisters, rust or corrosion products presented on the coatings of the CB-modified series due to the good dispersion and conductivity of nanosized CB clusters, while the zinc corrosion products covered the surface of the MWCNT-modified series samples, which was attributed to the excessive electrical conductivity resulting in high consumption of zinc powder. The lamellar CG provided an additional blocking barrier for the coatings based on the maze effect. The transition from the intrinsic state to the doped state of PANI resulted in corrosion protection for the coatings depending on the cathodic and barrier function. The experimental results suggested that the formula with 2 wt.% CB and 67 wt.% zinc dust had the most promising anticorrosion properties, which was also demonstrated by the high Rct and low CPEdl values calculated according to the equivalent electrical circuit analyses.
- Open Access
Fabrication of a Conductive Additive for the Anticorrosion Enhancement of Zinc-Rich Epoxy Coatings
In the study, a conductive polypyrrole (PPy) is deposited on the lamellar sericite powder (SCP) surfaces by an in situ oxidization growth method and the prepared PPy/SCP conductive additive is successfully applied on the zinc-rich primer (ZRP) coating. The equal mass substitution and the equal volume substitution methods of the conductive additives to zinc dusts are discussed, as well as the optimal replacing ratio to achieve the best corrosion protection effect of the ZRP coatings. The results indicate that the equal volume substitution method is in favor of corrosion resistance of coating film. The salt spray test and the electrochemical impedance spectroscopy (EIS) and polarization curves show that the prepared ZRP coating with a 66% zinc content and replacing ratio of 1:3 possesses the best corrosion-resistant performance and an optimal adhesion strength. The replacement of PPy/SCP particles to zinc dusts using the equal volume substitution method is feasible to achieve the improvement in anticorrosion ability through a synergic function of the cathodic protection effect and barrier effect.
Open AccessFabrication of a Conductive Additive for the Anticorrosion Enhancement of Zinc-Rich Epoxy Coatings
In the study, a conductive polypyrrole (PPy) is deposited on the lamellar sericite powder (SCP) surfaces by an in situ oxidization growth method and the prepared PPy/SCP conductive additive is successfully applied on the zinc-rich primer (ZRP) coating. The equal mass substitution and the equal volume substitution methods of the conductive additives to zinc dusts are discussed, as well as the optimal replacing ratio to achieve the best corrosion protection effect of the ZRP coatings. The results indicate that the equal volume substitution method is in favor of corrosion resistance of coating film. The salt spray test and the electrochemical impedance spectroscopy (EIS) and polarization curves show that the prepared ZRP coating with a 66% zinc content and replacing ratio of 1:3 possesses the best corrosion-resistant performance and an optimal adhesion strength. The replacement of PPy/SCP particles to zinc dusts using the equal volume substitution method is feasible to achieve the improvement in anticorrosion ability through a synergic function of the cathodic protection effect and barrier effect.
- Top Cited PapersOpen Access
Recent Progresses of Superhydrophobic Coatings in Different Application Fields: An Overview
With the development of material engineering and coating industries, superhydrophobic coatings with exceptional water repellence have increasingly come into researchers’ horizons. The superhydrophobic coatings with corrosion resistance, self-cleaning, anti-fogging, drag-reduction, anti-icing properties, etc., meet the featured requirements from different application fields. In addition, endowing superhydrophobic coatings with essential performance conformities, such as transparency, UV resistance, anti-reflection, water-penetration resistance, thermal insulation, flame retardancy, etc. plays a remarkable role in broadening their application scope. Various superhydrophobic coatings were fabricated by diverse technologies resulting from the fundamental demands of different fields. Most past reviews, however, provided only limited information, and lacked detailed classification and presentation on the application of superhydrophobic coatings in different sectors. In the current review, we will highlight the recent progresses on superhydrophobic coatings in automobile, marine, aircraft, solar energy and architecture-buildings fields, and discuss the requirement of prominent functionalities and performance conformities in these vital fields. Poor durability of superhydrophobic coating remains a practical challenge that needs to be addressed through real-world application. This review serves as a good reference source and provides insight into the design and optimization of superhydrophobic coatings for different applications.
Top Cited PapersOpen AccessRecent Progresses of Superhydrophobic Coatings in Different Application Fields: An Overview
With the development of material engineering and coating industries, superhydrophobic coatings with exceptional water repellence have increasingly come into researchers’ horizons. The superhydrophobic coatings with corrosion resistance, self-cleaning, anti-fogging, drag-reduction, anti-icing properties, etc., meet the featured requirements from different application fields. In addition, endowing superhydrophobic coatings with essential performance conformities, such as transparency, UV resistance, anti-reflection, water-penetration resistance, thermal insulation, flame retardancy, etc. plays a remarkable role in broadening their application scope. Various superhydrophobic coatings were fabricated by diverse technologies resulting from the fundamental demands of different fields. Most past reviews, however, provided only limited information, and lacked detailed classification and presentation on the application of superhydrophobic coatings in different sectors. In the current review, we will highlight the recent progresses on superhydrophobic coatings in automobile, marine, aircraft, solar energy and architecture-buildings fields, and discuss the requirement of prominent functionalities and performance conformities in these vital fields. Poor durability of superhydrophobic coating remains a practical challenge that needs to be addressed through real-world application. This review serves as a good reference source and provides insight into the design and optimization of superhydrophobic coatings for different applications.