Sheng-Jun Zhang
Research Subjects
Sheng-Jun Zhang has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Chao Wang
Baoding Univ, Coll Artificial Intelligence, Baoding 071000, Peoples R China
2 shared publications - Lei Zhao
China University of Mining and Technology
2 shared publications - Ru-Zhi Wang
Beijing University of Technology
2 shared publications Han Wang
Faculty of Materials and Manufacturing, Beijing University of Technology 1 , Beijing 100124, China
1 shared publication- Jun Wang
China University of Mining and Technology
1 shared publication Li-Hong Ai
Capital Aerospace Machinery Company 4 , Beijing 100076, China
1 shared publication
Latest Publications
- 4 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (6) , 1869-1873
Fast Design of Ultrawideband Absorbers Based on Equivalent Circuit Model
A fast method is presented for designing ultra-wideband absorbers composed of resistive surfaces (RSs), substrates and metallic plate. A general effective permittivity for RSs printed on stratified dielectrics under considering metallic plate is derived to obtain the closed-form relationships between resistance, capacitance and absorber parameters. An equivalent circuit (EC) is developed for absorbers to combine with genetic algorithm to quickly achieve an optimal value of lumped elements, thereby calculating absorber parameters. Utilizing the proposed approach, an absorber within 0.64-41.7 GHz with reflection loss lower than -10 dB is obtained efficiently. The close match between the EC model and full-wave simulation results shows accuracy of the proposed approach. To further verify the proposed method, a 1.16-19.2 GHz absorber was designed and manufactured, and the measurements agreed well with the EC and full-wave simulations.
- 4 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (6) , 1869-1873
Fast Design of Ultrawideband Absorbers Based on Equivalent Circuit Model
A fast method is presented for designing ultra-wideband absorbers composed of resistive surfaces (RSs), substrates and metallic plate. A general effective permittivity for RSs printed on stratified dielectrics under considering metallic plate is derived to obtain the closed-form relationships between resistance, capacitance and absorber parameters. An equivalent circuit (EC) is developed for absorbers to combine with genetic algorithm to quickly achieve an optimal value of lumped elements, thereby calculating absorber parameters. Utilizing the proposed approach, an absorber within 0.64-41.7 GHz with reflection loss lower than -10 dB is obtained efficiently. The close match between the EC model and full-wave simulation results shows accuracy of the proposed approach. To further verify the proposed method, a 1.16-19.2 GHz absorber was designed and manufactured, and the measurements agreed well with the EC and full-wave simulations.
- Open Access
- 24 July 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (4)
Reducing radar cross section of flat metallic targets using checkerboard metasurface: Design, analysis, and realization
Aiming at the large-scale application of metasurface in the field of radar stealth, we present a hybrid resonance-based and dispersion substrate integrated checkerboard metasurface (CMS) for reducing the radar cross section (RCS) of flat metallic targets. Considering the frequency-dependent characteristics of such a dispersion material, a pair of single and dual resonant artificial magnetic conductor meta-atoms with the modified “crusades-like” cell topologies is employed to maximize the operating bandwidth; besides, a comprehensive and thorough investigation on the resonance mechanism is conducted in this paper to provide an intuitive physical insight of meta-atoms’ reflection responses. By comparing the predicted results with simulations, the quasi-periodic effect is introduced to explain the frequency shift of 10 dB RCS reduction bandwidth. In the implementation procedure, a prototype of the designed RCS reducer with a total dimension of 180 × 180 mm2 is fabricated and measured, the 10 dB RCS reduction bandwidth of theoretical simulation and experimental measurement are basically consistent, and the performance improvement of 8 dB RCS reduction in the experimental results can be attributed to the dispersion effects of the dielectric substrate. With a better figure of merit, our efforts may serve as a useful exemplar for the economical CMS architecture in radar evasive applications.
- 24 July 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (4)
Open AccessReducing radar cross section of flat metallic targets using checkerboard metasurface: Design, analysis, and realization
Aiming at the large-scale application of metasurface in the field of radar stealth, we present a hybrid resonance-based and dispersion substrate integrated checkerboard metasurface (CMS) for reducing the radar cross section (RCS) of flat metallic targets. Considering the frequency-dependent characteristics of such a dispersion material, a pair of single and dual resonant artificial magnetic conductor meta-atoms with the modified “crusades-like” cell topologies is employed to maximize the operating bandwidth; besides, a comprehensive and thorough investigation on the resonance mechanism is conducted in this paper to provide an intuitive physical insight of meta-atoms’ reflection responses. By comparing the predicted results with simulations, the quasi-periodic effect is introduced to explain the frequency shift of 10 dB RCS reduction bandwidth. In the implementation procedure, a prototype of the designed RCS reducer with a total dimension of 180 × 180 mm2 is fabricated and measured, the 10 dB RCS reduction bandwidth of theoretical simulation and experimental measurement are basically consistent, and the performance improvement of 8 dB RCS reduction in the experimental results can be attributed to the dispersion effects of the dielectric substrate. With a better figure of merit, our efforts may serve as a useful exemplar for the economical CMS architecture in radar evasive applications.
- Open Access
- 22 June 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (24)
Broadband spectrally selective infrared radiation and its applications of a superstructure film of combined circular patches
Selective infrared radiation is crucial for achieving infrared stealth and heat dissipation. Artificially designed superstructure film (SF) provides several advantages for controlling and modulating infrared radiation, making them a promising solution for these applications. The research described in this work has successfully produced broadband selective infrared radiation by using a surface made up of circular patches that are combined. Numerical simulations show that this SF can achieve broadband selective radiation with 3–5 μm mid-wave infrared (MWIR) suppression and 8–14 μm long-wave infrared (LWIR) emission. The spectral selectivity can be easily switched to high emissivity in MWIR and low emissivity in LWIR by simply changing the basal layer. The resonance mechanism for achieving broadband spectral selectivity in the SF may be due to a combination of multimode plasmon resonances that are induced by the structural nonrotational symmetry of the circular patches. By applying the selective radiation SF on the tail nozzle or the vehicle, the effect of thermal management is very significant. Selective radiation SF can reduce radiant energy in the 3−5 μm band by a significant amount at 500 °C, resulting in a 46 °C cooler temperature than that at the body without the SF. At 80 °C, radiated energy in the 8–14 μm band is also considerably reduced and the temperature is 10 °C lower than that of the body without the SF. There will be obvious advantages in potential applications for infrared stealth and heat dissipation by the designed SF, a simple and convenient manufacturing process.
- 22 June 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (24)
Open AccessBroadband spectrally selective infrared radiation and its applications of a superstructure film of combined circular patches
Selective infrared radiation is crucial for achieving infrared stealth and heat dissipation. Artificially designed superstructure film (SF) provides several advantages for controlling and modulating infrared radiation, making them a promising solution for these applications. The research described in this work has successfully produced broadband selective infrared radiation by using a surface made up of circular patches that are combined. Numerical simulations show that this SF can achieve broadband selective radiation with 3–5 μm mid-wave infrared (MWIR) suppression and 8–14 μm long-wave infrared (LWIR) emission. The spectral selectivity can be easily switched to high emissivity in MWIR and low emissivity in LWIR by simply changing the basal layer. The resonance mechanism for achieving broadband spectral selectivity in the SF may be due to a combination of multimode plasmon resonances that are induced by the structural nonrotational symmetry of the circular patches. By applying the selective radiation SF on the tail nozzle or the vehicle, the effect of thermal management is very significant. Selective radiation SF can reduce radiant energy in the 3−5 μm band by a significant amount at 500 °C, resulting in a 46 °C cooler temperature than that at the body without the SF. At 80 °C, radiated energy in the 8–14 μm band is also considerably reduced and the temperature is 10 °C lower than that of the body without the SF. There will be obvious advantages in potential applications for infrared stealth and heat dissipation by the designed SF, a simple and convenient manufacturing process.
- Open Access
- 8 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 10797-10804
Integrated Hybrid Antenna Based on Spoof Surface Plasmon Polaritons
In this paper, we proposed an integrated hybrid antenna based on spoof surface plasmon polaritons (SSPPs) which combines with omnidirectional antenna (ODA) and the frequency beam scanning antenna (FBSA). The ODA is fed by the SSPPs and the operating principle of FBSA is based on the higher-order modes of the SSPPs. The radiation mechanisms of the proposed integrated antenna are that the low-pass transmission modes of SSPPs are used to excite the ODA and the higher-order modes of SSPPs are utilized to generate the frequency beam scanning waves. That is to say, the SSPP design not only serves as the feeding structure for the ODA, but also acts as the radiating element for the FBSA. Simulated results show that the proposed integrated antenna achieves two impedance bandwidths. Within the operating bandwidth 2.32 GHz to 4.42 GHz, the proposed integrated antenna achieves omnidirectional radiation patterns, which enables the simultaneous use for wireless local area network (WLAN) and 5 G applications. Meanwhile, from 11.45 GHz to 25.5 GHz, the proposed integrated antenna acts as a wide-angle frequency beam scanning characteristic and can be used for planar integrated communication systems. Additionally, a prototype of the proposed integrated hybrid antenna is fabricated and tested. The measured results have a good agreement with the simulated ones.
- 8 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 10797-10804
Open AccessIntegrated Hybrid Antenna Based on Spoof Surface Plasmon Polaritons
In this paper, we proposed an integrated hybrid antenna based on spoof surface plasmon polaritons (SSPPs) which combines with omnidirectional antenna (ODA) and the frequency beam scanning antenna (FBSA). The ODA is fed by the SSPPs and the operating principle of FBSA is based on the higher-order modes of the SSPPs. The radiation mechanisms of the proposed integrated antenna are that the low-pass transmission modes of SSPPs are used to excite the ODA and the higher-order modes of SSPPs are utilized to generate the frequency beam scanning waves. That is to say, the SSPP design not only serves as the feeding structure for the ODA, but also acts as the radiating element for the FBSA. Simulated results show that the proposed integrated antenna achieves two impedance bandwidths. Within the operating bandwidth 2.32 GHz to 4.42 GHz, the proposed integrated antenna achieves omnidirectional radiation patterns, which enables the simultaneous use for wireless local area network (WLAN) and 5 G applications. Meanwhile, from 11.45 GHz to 25.5 GHz, the proposed integrated antenna acts as a wide-angle frequency beam scanning characteristic and can be used for planar integrated communication systems. Additionally, a prototype of the proposed integrated hybrid antenna is fabricated and tested. The measured results have a good agreement with the simulated ones.