EFEko Fibryanto

Eko Fibryanto

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Eko Fibryanto has a total of 44 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Reinforcing three-dimensional self-reinforcing self-etch adhesive and surface conditioning in immediate dentin sealing of composite resin–dentin

    by Poppy Andriani, Ade Prijanti Dwisaptarini, Eko Fibryanto, Rosalina Tjandrawinata, Siriwan Suebnukarn

    Background: Exposed dentin must be sealed with a dentin bonding agent immediately after tooth preparation, described as immediate dentin sealing (IDS). The purpose of IDS is to prevent dentin contamination during temporary restorations, reduce dentin hypersensitivity, and improve bond strength. Self-etch (SE) adhesive can be easily removed during surface treatment before cementation in the IDS technique. Reinforced SE adhesive with an additional layer of flowable composite significantly increases bond strength. Purpose: This study aimed to determine the effects of reinforcing one-bottle SE adhesive with a three-dimensional self-reinforcing monomer and surface conditioning with air abrasion and pumice on the bonding of composite resin to dentin in the IDS technique. Methods: Thirty-six human premolars were selected and randomly divided into three groups. Each group was divided into two sub-groups (n = 6) according to the adhesive system and surface conditioning. All samples were restored with 3 × 3 × 3 mm composite resin before being tested for shear bond strength. The data were analyzed with two-way ANOVA and Sidak’s multiple comparison test (p < 0.05). Results: There were significant differences between groups. Total-etch with pumice showed a higher mean value of shear bond strength than SE with air abrasion. Conclusion: The use of air abrasion in the IDS technique with SE adhesive affects the shear bond strength of dentin. Surface conditioning with air abrasion or pumice with SE adhesive showed the lowest mean values compared with SE adhesive with an additional layer of flowable composite resin.

  • Open Access

    The Evolving Trends In Vital Pulp Therapy Through the Application of Various Biomaterials: A Bibliometric Study

    by Wiena Widyastuti, Wita Anggraini, Eko Fibryanto, Moehamad Orliando Roeslan, Indrayadi Gunardi, Muhammad Ihsan Rizal, Sobrina Mohamed Khazin, Dewa Made Wedagama

    Vital pulp therapy (VPT) is a crucial dental intervention designed to maintain the vitality of the dental pulp, particularly in carious lesions or trauma. The evolution of biomaterials in VPT has significantly affected dental practices by providing less invasive alternatives that safeguard tooth vitality and functionality. Continued exploration of the properties and effects of these materials is crucial for enhancing treatment strategies and optimizing dental care outcomes. Bibliometric analysis allowed the assessment of trends in the biomaterials used for VPT. Data mining was performed using the Scopus database and Boolean expressions. Data extraction and analysis were conducted using VOSviewer version 1.6.20., VOSviewer thesaurus, and Microsoft Excel. A total of 856 documents were identified, and the United States had the largest number of documents and citations (110 documents, 6,938 citations). The top three sources were the Journal of Endodontics, International Journal of Endodontics, and Dental Materials Journal. Mineral trioxide aggregate (MTA) is still the dominant biomaterial used in VPT to this day. MTA can accelerate dentinogenesis in VPT. The prominence of “MTA” and “VPT” as keywords highlights research on prevalence, causes, prevention, and evaluation, emphasizing the need to investigate biomaterial-driven healing, regeneration, stem cell activity, and gene expression.


  • Open Access

    pH AND ANTIBIOFILM ANALYSIS OF ELEPHANT GINGER MOUTHWASH FORMULATIONS AGAINST Streptococcus mutans – An in vitro Study

    by Eko Fibryanto, Rosita Stefani, Lidia Santoso

    Background: Caries is the most common oral disease. Streptococcus mutans is the main microorganism in caries etiology due to its ability to form biofilm. Biofilm can be eliminated using mouthwash. Elephant ginger (Zingiber officinale var. officinale) can be developed as a herbal mouthwash because it is able to inhibit S. mutans. This study aimed to analyze pH and antibiofilm effect in vitro of elephant ginger mouthwash formulations on S. mutans. Method: Elephant ginger was macerated with 96% ethanol, then formulated into 2.5%, 5%, 10%, and 15% mouthwash formulations, underwent pH measurement for 28 days, and their antibiofilm effect on S. mutans were measured using microplate reader for 1h (therapeutic assay) and 24h (preventive assay). Result: All formulations showed pH values ranging from 6.42-6.87, changing significantly within 28 days. All formulations were able to reduce S. mutans biofilm adherence for 1h better than commercialized herbal mouthwash and similar to 0.1% CHX. Furthermore, 5% and 10% mouthwash formulations showed similar effectivity to 0.1% CHX and commercialized herbal mouthwash in inhibiting S. mutans biofilm formation for 24h, while 15% mouthwash formulation was more effective than 0.1% CHX and similar to commercialized herbal mouthwash, and 2.5% mouthwash formulation was less effective than 0.1% CHX and commercialized herbal mouthwash. Conclusion: Elephant ginger mouthwash formulations showed pH values that were likely to decrease for 28 days and had the potential as an herbal mouthwash due to its antibiofilm effect on S. mutans.


  • Open Access

    The establishment of pulp polyp-derived mesenchymal stem cells with normal karyotype

    by Ferry Sandra, Eko Fibryanto, Tien Suwartini, Anastasia Elsa Prahasti, Widya Wulandari, Andri Sutanto, Lyvia Juliana, Kyung Hoon Lee

  • Open Access

    Surface roughness of supra-nano spherical filled and nanohybrid composite resin after Coffea arabica immersion: an experimental study

    by Bryan Matthew Jordan, Dina Ratnasari, Eko Fibryanto, Syuwari Azhar Bin Azman

    Introduction: Supra-nano spherical filled composite resin (Omnichroma, Tokuyama, Japan) with sol-gel method has 0.26 μm filler size, while nanohybrid composite resin (ENA HRi, Micerium, Italy) has 0.2-1 μm filler size. Nanofillers enhance resistance from chlorogenic acid contained in Coffea arabica. This study analyzed the surface roughness difference between supra-nano spherical-filled and nanohybrid composite resins after Coffea arabica immersion for 7 and 14 days, with 15 minutes of immersion each day. Methods: This study was an in vitro laboratory experiment with a pretest-posttest control group design. Twenty composite resin samples were immersed in artificial saliva and divided into four groups; supra-nano coffee, nanohybrid coffee, supra-nano saliva (control), and nanohybrid saliva (control). After 24 hours, immersion in Coffea arabica was started for supra-nano coffee group and nanohybrid coffee group for 15 minutes daily until days 7 and 14. Control groups were immersed in saliva. Results: One-way ANOVA showed significant differences in the surface roughness between composite resin groups. Post-hoc Tukey showed a significant difference between supra-nano coffee (0.91± 0.29 μm) and nanohybrid saliva (1.43±0.42 μm). The GLM Repeated Measure test showed significant surface roughness changes in supra-nano after 14 days of immersion in Coffea arabica (1.47±0.13 μm), while nanohybrid experienced surface roughness changes in 7 days of immersion in Coffea arabica (1.94±0.55 μm) and increased in 14 days (2.25±0.47 μm). In saliva immersion (control group), nanohybrid experienced an increase in surface roughness after 14 days, while supra-nano did not experience a significant increase in surface roughness. Conclusion: Supra-nano spherical filled composite resin exhibits greater resistance to changes in surface roughness following immersion in Coffea arabica.KEYWORDSCoffea arabica, nanohybrid, composite resin, supra-nano spherical filled, surface roughness

  • Open Access

    Effect of Ultrasonic Combined with Solvent on Gutta-Percha and Bioceramic Sealer Removal in Middle and Apical Third of the Root Canal: An ex vivo study

    by Eko Fibryanto, Wiena Widyastuti, Adi Hidayat, Lisiana Hastuty

    Objective: This study aims to investigate the effectiveness of ultrasonic tip with and without solvent in removing gutta-perca and bioceramic sealer from the middle and apical third of the root canals. Methods: This is a true experimental study with randomized pretest-posttest control group design. Eighteen freshly extracted straight single-rooted mandibular first premolars were confirmed by CBCT and selected. The teeth were decoronated until a length of 16 ± 0.5mm. The teeth were prepared and obturated using gutta-percha and bioceramic sealer with a hydraulic condensation technique. Pre-instrumentation CBCT imaging of all teeth was carried out to obtain the initial volume of the obturation material. After incubating for 30 days, the treated teeth were randomly divided into three groups (n = 6): ultrasonic and xylene, ultrasonic and orange oil, and ultrasonic only. Post-instrumentation CBCT was carried out and the amount of obturation material removed was calculated using CT Analyser. The two-way ANOVA was used to determine the solvent and location interaction. Results: The results showed that there was no significant difference among the groups based on the treatment and location (p > 0.05). In addition, no significant interaction was found in relation to the cleanliness of the root canal (p > 0.05). Conclusion: There was no difference in the effectiveness of ultrasonic obturation material cleaning with and without endodontic solvents. Based on the results, the obturation material with the most residue is a sealer.


  • Open Access

    The effect of oxygen-inhibited layer and its inhibition technique on diametral tensile strength values of various nanofilled composite resin types

    by Steward Hadi, Rosalina Tjandrawinata, Eko Fibryanto

    Aim: To investigate the impact of different inhibitory techniques on the thickness of oxygen-inhibited layer (OIL) and diametral tensile strength (DTS) value in various types of nanofilled composite resins. Materials and Methods: Thirty-six nanofilled composite resins specimens, consisting of packable, flowable, high-viscosity bulk-fill (HVBF), low-viscosity bulk-fill (LVBF), shaped as half disk (diameter: 6 mm and height 3 mm) and randomly allocated to three groups (n = 3): with Mylar strip, glycerin application, and without OIL inhibitors. OIL thickness was observed with an optical microscope. Furthermore, 60 specimens of composite resins were incrementally created in disk-shaped molds (diameter: 6 mm, height: 1.5 mm × 2 mm). DTS measurements were carried out using a universal testing machine. Data were statistically analyzed using a two-way analysis of variance (ANOVA) test and Pearson’s correlation test (P < 0.05). Results: OIL inhibitor techniques (Mylar strip and glycerin) significantly affected OIL formation across various types of nanofilled composite resins (P < 0.05). Changes were also observed in how these techniques influenced DTS values. Correlation analysis indicated a positive relationship between OIL thickness and DTS value. Conclusions: Application of Mylar strip and glycerin reduced OIL thickness and DTS values in packable, flowable, HVBF, LVBF nanofilled composite resins. Glycerin proved to be more effective than Mylar strips in reducing OIL thickness, which is reflected in the DTS values of nanofilled composite resins. Greater OIL layer thickness on the outermost layer of the nanofilled composite resin correlated with a higher DTS value.


  • Open Access

    Successful regenerative approach with direct pulp capping using mineral trioxide aggregate after pulpal injury 2 years follow-up: Case report

    by Poppy Andriani, Ade Prijanti Dwisaptarini, Eko Fibryanto, Nur Zety Mohd Noh

    ASBTRAK Introduction: A complete excavation of dental caries can accidentally expose the pulp. Pulp exposure should be sealed immediately to maintain pulp vitality and heal after injury, called direct pulp capping. Direct pulp capping can stimulate the formation of dentinal bridgess to maintain pulp vitality after injury using biomaterial agents The objective of this case report is to demonstrate the efficacy of regenerative endodontic approach, specifically direct pulp-capping therapy using mineral trioxide aggregate, in treating the injury with a six-month follow up. Case report: A 19-year-old female complained of slight discomfort while drinking cold water on her right second incisor. Clinical examination revealed proximal dentin caries. Vitality and percussion tests were negative. Radiograph examination showed a radiolucent area on the mesial proximal part that affected both enamel and dentin. The tooth was diagnosed with reversible pulpitis. The area was isolated with a rubber dam. Dentin caries was removed using the rotary instrument. In the process, the pulp cavity was exposed iatrogenically at one site with minor bleeding, so direct pulp capping was applied to maintain pulp vitality. The cavity was disinfected with chlorhexidine 2%. Mineral Trioxide Aggregate (MTA) was selected as the material for direct pulp capping. Initially, it was administered to the exposed pulp, succeeded by the application of glass ionomer cement and temporary restoration. Two years follow-up, positive vitality and negative percussion test results were observed. X-rays showed the formation of hard tissue, and there were no pathological findings in the apical on tooth #12. Conclusion: When pulp is exposed due to deep caries, endodontic regenerative methods involving biomaterial agents can be employed. MTA has the capacity to encourage the formation of dentinal bridges and promote pulpal regeneration following an injury. Kata kunci dental caries, direct pulp capping, mineral trioxide aggregate, pulpal injury, pulp regeneration Keberhasilan kaping pulpa direk menggunakan mineral trioxide aggregate paska injuri 2 tahun follow-up: laporan kasus ABSTRACT Pendahuluan: Ekskavasi lesi karies dentin yang dalam secara tidak sengaja dapat menyebabkan eksposur pada pulpa. Jika eksposur pulpa terjadi, pulpa perlu dilapisi dengan segera untuk menjaga vitalitas pulpa dan regenerasi kembali setelah terjadi injuri yang disebut dengan kaping pulpa direk. Kaping pulpa direk dapat menstimulasi formasi jembatan dentin untuk menjaga vitalitas pulpa pasca injuri dengan suatu bahan biomaterial. Tujuan laporan kasus ini menunjukkan keberhasilan pendekatan regeneratif endodontik dengan perawatan kaping pulpa direk menggunakan mineral trioxide aggregate pasca injuri dengan 6 bulan follow-up. Laporan kasus: Pasien perempuan berusia 19 tahun mempunyai keluhan ada rasa ngilu yang ringan saat minum air dingin pada gigi depan kedua sebelah kanannya. Pemeriksaan klinis terdapat karies dentin pada bagian proximal. Tes vitalitas dan perkusi negatif. Pemeriksaan radiografi menunjukkan daerah radiolusen pada proksimal bagian mesial yang mengenai enamel dan dentin. Gigi tersebut didiagnosa dengan pulpitis reversibel. Daerah kerja diisolasi dengan rubber dam. Saat melakukan ekskavasi karies secara iatrogenik pulpa terbuka dengan titik perdarahan kecil dalam kavitas, perawatan kaping pulpa direk dipilih dalam mengatasi masalah tersebut. Kavitas di desinfeksi dengan larutan chlorhexidine 2%. Mineral Trioxide Aggregate (MTA) dipilih sebagai bahan biomaterial kaping pulpa direk. Setelah dua minggu pasca perawatan, restorasi akhir dilanjutkan dengan restorasi resin komposit. Pemeriksaan berkala 2 tahun paska perawatan, tes vitalitas dan perkusi negatif. Pemeriksaan radiografi terlihat formasi jaringan keras dan tidak terlihat adanya kelainan periapikal pada gigi #12. Simpulan: Pendekatan regeneratif endodontik dengan kaping pulpa direk, dapat diterapkan dalam perawatan pulpa yang terkena injuri saat ekskavasi karies dentin yang dalam. Penggunaan MTA dapat menstimulasi formasi jembatan dentin dan regenerasi pulpa setelah injuri Key words injuri pulpa, kaping pulpa direk, karies dentin, mineral trioxide aggregate, regenerasi pulpa


  • Open Access

    EVALUATION OF pH AND VISCOSITY OF JUICE OF Zingiber officinale var. officinale MOUTHWASH FORMULATION

    by Rosita Stefani, Gisela Ellenia Vanessa, Eko Fibryanto

    Zingiber officinale var. officinale juice has many benefits. It can be used as a mixture of mouthwash. To analyse the difference of Zingiber officinale var. officinale mouthwashes 3,125%, 6,25%, and 12,5% on pH and viscosity values on day 0,14,28,42, and 56. Zingiber officinale var. officinale 3,125%, 6,25%, and 12,5% is mixed with propylene glycol, PEG-40 hydrogenated castor oil, oleum menthae, benzoic acid, sodium benzoate, calcium lactate, sorbitol 70% and calcium thiocyanate. The formulation has measured with pHmeter (Jenway, United Kingdom) and viscometer (Brookfield, Massachusetts) for 56 days. The pH data is analyzed using GLM Repeated Measures ANOVA and One-Way ANOVA (p<0,05). Viscosity data is analyzed using GLM Repeated Measured ANOVA and Kruskal Wallis (p<0,05). The pH value of 3,125% formulation shows significant difference for 56 days in range 5,50-5,61. The viscosity value shows no significant difference for 56 days in range 3,03-3,09 cP. The pH and viscosity values of 6,25% formulation shows no significantly different for 56 days with 5,78-5,83 pH value, while the viscosity is 3,12-3,13 cP. The pH and viscosity values of the 12,5% formulation shows no significantly different for 56 days with 4,90-4,97 pH value, while the viscosity is 3,43-3,50 cP. Zingiber officinale var. Officinale mouthwash formulations 3,125% has been unstable, but it has the lowest viscosity value and has been stabled for 56 days. The pH and viscosity values of 6,25% and 12,5% formulations have been stabled for 56 days. The highest pH value is in the formulation of 6,25%.