DJDorrin Jarrahbashi

Dorrin Jarrahbashi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dorrin Jarrahbashi has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Numerical analysis of detonation dynamics in ammonia–hydrogen mixtures

    by Mahmood Mousavi, Prithvi Ramesh, Bok Jik Lee, Dorrin Jarrahbashi

  • Numerical analysis of droplet aerobreakup in supercritical flows

    by Prajesh Jangale, Bradley Boyd, Dorrin Jarrahbashi

    This study investigates the aerobreakup mechanisms of a liquid droplet initially at a temperature below its critical point impacted by a shockwave in a supercritical environment, i.e. transcritical conditions, occurring in high-pressure/speed liquid-fuelled propulsion systems. Aerobreakup droplet breakup mechanisms have been extensively studied at atmospheric conditions, not considering the significant changes in fluid properties past the critical point that occur within very short breakup time scales in shock-dominated flows. Furthermore, the effects of decreased surface tension forces due to the weakening of intermolecular forces at supercritical conditions on the droplet breakup behaviour have not been resolved to date. This study aims to address these major gaps by developing a direct numerical simulation method to investigate the governing mechanism of droplet aerobreakup at transcritical conditions considering the changes in surface tension. A diffuse interface method coupled with a real-gas equation of state is developed to capture the fluid behaviour beyond the critical point. The results show that simultaneous changes in surface tension and density ratio unique to transcritical flows dictate the droplet aerobreakup mechanisms and the resultant breakup modes. This study presents the first transcritical droplet breakup regime map as a function of Weber number and density ratio compared with the classical breakup criteria commonly accepted for subcritical conditions, proving that the breakup is facilitated at supercritical conditions. The findings are expected to significantly contribute to the development of transcritical droplet aerobreakup models to enable the simulation of spray-shock interaction needed for designing new high-speed/pressure liquid fuel injection systems.


  • Numerical analysis of droplet cloud interaction with a hypersonic flow field

    by Prithvi Ramesh, Dorrin Jarrahbashi

    Hypersonic vehicles reenter the Earth's atmosphere at speeds exceeding Mach 6, facing potential structural damage from hydrometeors, e.g., rain, ice, fog, hail, or snow in the upper atmosphere, which significantly vary in size and temperature. These water-based droplets can breakup into smaller droplets upon interaction with the vehicle's shock structure, posing a significant threat to the vehicle's surface and thermal protection layer. Droplet behavior in hypersonic flows around complex nose tip geometries remains poorly understood due to experimental challenges in resolving the broad time and length scales involved. The primary uncertainty in predicting the potential impact on a vehicle's surface lies in understanding the behavior of liquid droplets undergoing shock-driven breakup and evaporation. This study computationally investigates the behavior of a cloud of droplets approaching a hypersonic flow field around two different canonical geometries, i.e., a double-wedge and a cone-cylinder-flare. An Eulerian–Lagrangian modeling approach is employed, considering breakup and phase change. The results show the intricate behavior of droplets undergoing breakup with the complex flow field, e.g., shock-boundary layer interaction and boundary layer separation/reattachment. Droplet breakup significantly promotes droplet entrapment and acceleration within the separation region, while larger solid particles tend to be deflected away from the wall, lowering the likelihood of particle impact with the surface. Droplets passing through the front shock create a high-speed region within the post-shock and boundary layer regions. Droplets displayed a tendency to decelerate and reside in the boundary layer after breakup. Phase change is found to have a negligible effect on droplet trajectory and speed, particularly for larger droplets, with a majority of the phase change occurring within the boundary layer region.


  • Direct numerical simulation of supercritical carbon dioxide oxy-methane combustion

    by Rohit Mishra, Dorrin Jarrahbashi

    Supercritical CO2 (sCO2) oxy-methane combustion is a key component of zero-carbon technologies in direct-fired sCO2 power cycles, i.e., the Allam cycle which offers promising solutions for clean and sustainable energy production. The use of sCO2 as both working fluid and diluent to moderate the combustor exit temperature at high pressure and high preheat temperature in the Allam cycle poses a unique combustion behavior. The effects of high sCO2 dilution on sCO2 oxy-methane combustion behavior, flame propagation, and flame stability are not fully resolved due to experimental challenges at such extreme conditions. This study addresses this major challenge by providing an understanding of the effect of sCO2 dilution on supercritical mixing and the combustion behavior in sCO2 oxy-methane combustion. A direct numerical simulation (DNS) integrated with the real-fluid equation of state is developed to provide the first DNS dataset for the realistic operating conditions of sCO2 oxy-methane combustors designed by Southwest Research Institute. The combustion behavior shows that sCO2 dilution has a major impact on mixing, heat release rate, temperature, and flame thickness. A peak in the heat release rate is identified for a given air–fuel ratio and the lowest CO production for 75%–80% CO2 dilution which results in a maximum temperature of 2000 K. By comparing the results obtained from ideal- and real-fluid equation of state, this study shows that real-fluid effects can significantly affect density gradient distribution and heat release rate, impacting supercritical mixing and flame dynamics under high sCO2 dilution. The results provide crucial insight for designing future sCO2 oxy-combustors.


  • Open Access

    Bubble generation mechanisms in microchannel under microgravity and heterogeneous wettability

    by S. Mahmood Mousavi, Jongkwon Lee, Bok Jik Lee, Dorrin Jarrahbashi, Nader Karimi, Salah A. Faroughi

    Advances in hybrid surfaces have revealed interesting opportunities for multiphase flow control under microgravity, as the surface tension force is dominant in this condition. However, a comprehensive investigation of bubble generation rates and slug flow parameters remains challenging. This research integrates hybrid wettability and modified dynamic contact angle models to address this important knowledge gap. Using the computational capabilities of the IsoAdvector multiphase method, we performed detailed simulations of complex multiphase flow scenarios with the OpenFOAM package. We then validated these simulation results through rigorous comparison with available experimental data, thereby strengthening the accuracy and reliability of our numerical simulations. Our comprehensive research demonstrates the profound effect of altering contact angle distribution patterns on several critical parameters. These results highlight the precise control that can be achieved through the strategic manipulation of these patterns, offering the possibility of adjusting factors such as bubble production rate, slug length, bubble diameter, the relationship of flow residence to bubble movement, bubble movement speed in the channel, and pressure drop. Interestingly, altering these patterns can also induce asymmetric behavior in bubbles under microgravity conditions, a phenomenon that has significant implications for various applications. Such insights are crucial for fields such as heat transfer in energy systems, reaction mechanisms in chemical processes, multiphase flow control in petrochemical industries, fluid dynamics in aerospace engineering, and cooling mechanisms in electronic devices. With the ability to modulate these fundamental parameters, we gain valuable insights into the design and optimization of microchannel systems. Consequently, this research presents a more efficient and innovative approach to multiphase flow control, promising improved operational performance, and efficiency in various engineering applications.


  • Open Access

    Impact of hybrid surfaces on the droplet breakup dynamics in microgravity slug flow: A dynamic contact angle analysis

    by S Mahmood Mousavi, Dorrin Jarrahbashi, Nader Karimi, Salah A Faroughi

    Microfluidic devices, which enable precise control and manipulation of fluids at the microscale, have revolutionized various fields, including chemical synthesis and space technology. A comprehensive understanding of fluid behavior under diverse conditions, particularly in microgravity, is essential for optimizing the design and performance of these devices. This paper aims to investigate the effects of discontinuous wettability on droplet breakup structures under microgravity conditions using a microchannel wall. The approach we adopt is underpinned by the volume-of-fluid methodology, an efficient technique renowned for its accurate resolution of the fluid interface in a two-phase flow. Furthermore, a modified dynamic contact angle model is employed to precisely predict the shape of the droplet interface at and near the wall. Our comprehensive model considers influential parameters such as slug length and droplet generation frequency, thereby providing crucial insights into their impact on the two-phase interface velocity. Validated against existing literature data, our model explores the impact of various configurations of discontinuous wettability on breakup morphology. Our findings highlight the significance of employing a dynamic contact angle methodology for making accurate predictions of droplet shape, which is influenced by the wall contact angle. Emphasis is placed particularly on the effects of slug length and droplet generation frequency. Notably, we demonstrate that the use of a hybrid surface at the junction section allows for precise control over the shape and size of the daughter droplets, contrasting with the symmetrical division observed on uniformly hydrophilic or superhydrophobic surfaces. This study contributes valuable insights into the complex dynamics of the droplet breakup process, which has profound implications for the design and optimization of microfluidic devices operating under microgravity conditions. Such insights are further poised to augment applications in space exploration, microreactors, and more.


  • Multifunctionality through Embedding Patterned Nanostructures in High‐Performance Composites

    by Ozge Kaynan, Ehsan Hosseini, Mohammad Zakertabrizi, Emile Motta De Castro, Lisa M. Pérez, Dorrin Jarrahbashi, Amir Asadi

    Despite being a pillar of high‐performance materials in industry, manufacturing carbon fiber composites with simultaneously enhanced multifunctionality and structural properties has remained elusive due to the lack of practical bottom‐up approaches with control over nanoscale interactions. Guided by the droplet's internal currents and amphiphilicity of nanomaterials, herein, a programmable spray coating is introduced for the deposition of multiple nanomaterials with tailorable patterns in composite. It is shown that such patterns regulate the formation of interfaces, damage containment, and electrical‐thermal conductivity of the composites, which is absent in conventional manufacturing that primarily rely on incorporating nanomaterials to achieve specific functionalities. Molecular dynamics simulations show that increasing the hydrophilicity of the hybrid nanomaterials, which is synchronous with shifting patterns from disk to ring, improves the interactions between the carbon surfaces and epoxy at the interfaces,manifested in enhanced interlaminar and flexural performance. Transitioning from ring to disk creates a larger interconnected network leading to improved thermal and electrical properties without penalty in mechanical properties. This novel approach introduces a new design , where the mechanical and multifunctional performance is controlled by the shape of the deposited patterns, thus eliminating the trade‐off between properties that are considered paradoxical in today's manufacturing of hierarchical composites.


  • Supercritical CO2-assisted atomization for deposition of cellulose nanocrystals: an experimental and computational study

    by Shadi Shariatnia, Prajesh Jangale, Rohit Mishra, Amir Asadi, Dorrin Jarrahbashi