Yanzhi Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yanzhi Hu has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Shouding Li
State Key Laboratory of Deep Petroleum Intelligent Exploration and Development, Institute of Geology and Geophysics, Chinese Academy of Sciences, Beijing 100029, China
3 shared publications - Xiao Li
State Key Laboratory of Deep Petroleum Intelligent Exploration and Development, Institute of Geology and Geophysics, Chinese Academy of Sciences, Beijing 100029, China
3 shared publications - Guanfang Li
Key Laboratory of Shale Gas and Geoengineering, Institute of Geology and Geophysics, Chinese Academy of Sciences, Beijing 100029, China
2 shared publications - Zhaobin Zhang
State Key Laboratory of Deep Petroleum Intelligent Exploration and Development, Institute of Geology and Geophysics, Chinese Academy of Sciences, Beijing 100029, China
2 shared publications - Bo Zheng
Key Laboratory of Shale Gas and Geoengineering, Institute of Geology and Geophysics, Chinese Academy of Sciences, Beijing 100029, China
1 shared publication - Changsuo Zhou
CNOOC Research Institute Co., Ltd., Beijing 100028, China
1 shared publication
Latest Publications
- Open Access
Mechanical Response and Failure Characteristics of Granite Under In Situ High-Temperature and High-Pressure True Triaxial Conditions
The exploitation of deep oil and gas resources faces challenges posed by complex high-temperature and high-pressure environments. Understanding the mechanical behavior of reservoir rocks under such conditions is therefore critical for ensuring engineering safety. Most existing studies utilize reservoir rock samples at ambient temperature or subjected to high-temperature pretreatment for conventional triaxial tests. However, research on the mechanical response under the coupled conditions of real-time high temperature and in situ true triaxial stress remains limited. To address this gap, this study employed a self-developed in situ true triaxial testing system capable of simultaneous high-temperature and high-pressure loading. Systematic in situ true triaxial mechanical tests were conducted on granite under temperatures up to 200 °C and confining pressures up to 200 MPa. After fracturing, the three-dimensional crack morphology was obtained using CT scanning, and quantitative characterized based on the average crack width and fractal dimension, systematically investigating the effects of temperature, intermediate principal stress (σ2), and minimum principal stress (σ3) on the mechanical parameters and fracture characteristics of granite. In this study, the results indicate that over the temperature range of 25–200 °C, the peak strength and elastic modulus decrease by approximately 11–18% and 15–40%, respectively, while the peak strain increases by 4–20%. The failure mode transitions gradually from a tensile–shear composite fracture at room temperature to a predominantly shear fracture at elevated temperatures. The rock brittleness is reduced, thus the damage zone expands, and macroscopic fractures decrease. Correspondingly, the average fracture width decreases from approximately 0.66 mm to 0.55 mm, and the fractal dimension increases from about 2.28 to 2.38. An increase in σ2 leads to a 19–26% increase in peak strength and a 33–75% increase in elastic modulus, while also increasing the average fracture width and decreasing the fractal dimension. Also, the rock brittleness increases, and the failure mode shifts from tensile–shear composite fracture to shear fracture. An increase in σ3 results in an approximately 11% increase in peak strength, a 30% increase in peak strain, and a 21% decrease in elastic modulus, accompanied by a decrease in average fracture width and an increase in fractal dimension. This suppresses the formation of a single dominant fracture surface, consequently increasing the complexity of the fracture morphology. This research reveals the mechanical response and failure laws of deep granite under high-temperature and true triaxial conditions, providing important insights for understanding the mechanical properties of deep reservoir rocks and for the design of drilling and fracturing operations.
Open AccessMechanical Response and Failure Characteristics of Granite Under In Situ High-Temperature and High-Pressure True Triaxial Conditions
The exploitation of deep oil and gas resources faces challenges posed by complex high-temperature and high-pressure environments. Understanding the mechanical behavior of reservoir rocks under such conditions is therefore critical for ensuring engineering safety. Most existing studies utilize reservoir rock samples at ambient temperature or subjected to high-temperature pretreatment for conventional triaxial tests. However, research on the mechanical response under the coupled conditions of real-time high temperature and in situ true triaxial stress remains limited. To address this gap, this study employed a self-developed in situ true triaxial testing system capable of simultaneous high-temperature and high-pressure loading. Systematic in situ true triaxial mechanical tests were conducted on granite under temperatures up to 200 °C and confining pressures up to 200 MPa. After fracturing, the three-dimensional crack morphology was obtained using CT scanning, and quantitative characterized based on the average crack width and fractal dimension, systematically investigating the effects of temperature, intermediate principal stress (σ2), and minimum principal stress (σ3) on the mechanical parameters and fracture characteristics of granite. In this study, the results indicate that over the temperature range of 25–200 °C, the peak strength and elastic modulus decrease by approximately 11–18% and 15–40%, respectively, while the peak strain increases by 4–20%. The failure mode transitions gradually from a tensile–shear composite fracture at room temperature to a predominantly shear fracture at elevated temperatures. The rock brittleness is reduced, thus the damage zone expands, and macroscopic fractures decrease. Correspondingly, the average fracture width decreases from approximately 0.66 mm to 0.55 mm, and the fractal dimension increases from about 2.28 to 2.38. An increase in σ2 leads to a 19–26% increase in peak strength and a 33–75% increase in elastic modulus, while also increasing the average fracture width and decreasing the fractal dimension. Also, the rock brittleness increases, and the failure mode shifts from tensile–shear composite fracture to shear fracture. An increase in σ3 results in an approximately 11% increase in peak strength, a 30% increase in peak strain, and a 21% decrease in elastic modulus, accompanied by a decrease in average fracture width and an increase in fractal dimension. This suppresses the formation of a single dominant fracture surface, consequently increasing the complexity of the fracture morphology. This research reveals the mechanical response and failure laws of deep granite under high-temperature and true triaxial conditions, providing important insights for understanding the mechanical properties of deep reservoir rocks and for the design of drilling and fracturing operations.
- Open Access
A Fully Coupled Discontinuous Deformation Analysis Model for Simulating Hydromechanical Processes in Fractured Porous Media
Numerical simulations play a key role in the optimization of fracturing operation designs for unconventional reservoirs. Because of the presence of numerous natural discontinuities and pores, the rock masses of reservoirs can be regarded as fractured porous media. In this paper, a fully coupled discontinuous deformation analysis model is newly developed to simulate the hydromechanical processes in fractured and porous media. The coupling of fracture seepage, pore seepage, and fracture network propagation is realized under the framework of DDA. The developed model is verified with several examples. Then, the developed DDA model is applied to simulate the hydraulic fracturing processes in fractured porous rock masses, and the effects of rock mass permeability on fracturing are investigated. Our findings suggest that high rock permeability may inhibit the stimulation of fracture networks, while increasing the viscosity of fracturing fluids can enhance the fracturing efficiency. This study provides a valuable numerical tool for simulating hydromechanical processes in fractured and porous media and can be used to analyze various geo-mechanical problems related to fluid interactions.
Open AccessA Fully Coupled Discontinuous Deformation Analysis Model for Simulating Hydromechanical Processes in Fractured Porous Media
Numerical simulations play a key role in the optimization of fracturing operation designs for unconventional reservoirs. Because of the presence of numerous natural discontinuities and pores, the rock masses of reservoirs can be regarded as fractured porous media. In this paper, a fully coupled discontinuous deformation analysis model is newly developed to simulate the hydromechanical processes in fractured and porous media. The coupling of fracture seepage, pore seepage, and fracture network propagation is realized under the framework of DDA. The developed model is verified with several examples. Then, the developed DDA model is applied to simulate the hydraulic fracturing processes in fractured porous rock masses, and the effects of rock mass permeability on fracturing are investigated. Our findings suggest that high rock permeability may inhibit the stimulation of fracture networks, while increasing the viscosity of fracturing fluids can enhance the fracturing efficiency. This study provides a valuable numerical tool for simulating hydromechanical processes in fractured and porous media and can be used to analyze various geo-mechanical problems related to fluid interactions.
- 11 June 2024
- Published by Wiley in Geophysical Prospecting
- Vol. 72 (7) , 2634-2645
Seismic migration of water‐bottom‐related multiples accelerated by random phase‐encoding strategy
Marine seismic multiples contain more structure information than primaries and should be considered in migrations. However, multiple migrations suffer from severe crosstalks generated by interferences among undesirable multiples. It has been proven that the water‐bottom‐related multiple migration can suppress crosstalks greatly. However, if all associated consecutive‐order multiples are considered, the computation cost is extremely high. To settle this issue, a phase‐encoding‐based multiple migration is proposed. Supergathers are first created by randomly phase‐encoding consecutive‐order multiples and stacking‐encoded multiples. By migrating supergathers, the proposed method can fulfil migrations of all order multiples simultaneously, thereby reducing the computation cost significantly. We use a three‐layer model and the Pluto 1.5 model for numerical comparisons. The results reveal that the method can retrieve high‐quality images and increase computation efficiency considerably.
- 11 June 2024
- Published by Wiley in Geophysical Prospecting
- Vol. 72 (7) , 2634-2645
Seismic migration of water‐bottom‐related multiples accelerated by random phase‐encoding strategy
Marine seismic multiples contain more structure information than primaries and should be considered in migrations. However, multiple migrations suffer from severe crosstalks generated by interferences among undesirable multiples. It has been proven that the water‐bottom‐related multiple migration can suppress crosstalks greatly. However, if all associated consecutive‐order multiples are considered, the computation cost is extremely high. To settle this issue, a phase‐encoding‐based multiple migration is proposed. Supergathers are first created by randomly phase‐encoding consecutive‐order multiples and stacking‐encoded multiples. By migrating supergathers, the proposed method can fulfil migrations of all order multiples simultaneously, thereby reducing the computation cost significantly. We use a three‐layer model and the Pluto 1.5 model for numerical comparisons. The results reveal that the method can retrieve high‐quality images and increase computation efficiency considerably.
- Open Access
The Feasibility Study of In Situ Conversion of Oil Shale Based on Calcium-Oxide-Based Composite Materia Hydration Exothermic Reaction
Oil shale, as a vast potential resource, is considered an important alternative energy source, and its effective development and economic utilization are of significant importance in alleviating the contradiction between energy supply and demand. Presently, the in situ conversion technology for oil shale has gained significant global attention, with numerous extraction methods undergoing active research and development. One of these methods is the in situ conversion of oil shale based on the hydration reaction of calcium-oxide-based composite material (CaO-CM). This approach harnesses the heat produced by the reaction between CaO-CM and water as a heat source for the pyrolysis of oil shale. This paper conducted experiments to assess the feasibility of temperature associated with this method. The feasibility study mainly includes two aspects: First, it is necessary to investigate whether the temperature generated by the hydration reaction of CaO-CM can meet the temperature requirements for the pyrolysis of oil shale. Through pyrolysis experiments of Xinjiang oil shale, the minimum temperature required for oil shale pyrolysis was determined to be 330 °C. High-temperature and high-pressure reaction vessels were employed to explore the temperature generated by the hydration reaction of CaO-CM. The results show that with the increase in environment pressure, environment temperature, and reaction mass, the maximum temperature generated by the hydration reaction of CaO-CM also increases (reach 455.5 °C), meeting the temperature requirements for the pyrolysis of oil shale. Second, the study evaluates whether the hydration reaction of CaO-CM can induce pyrolysis hydrocarbons of the oil shale. Through the pyrolysis experiments of oil shale based on the hydration reaction of CaO-CM, the changes in the content of pyrolysis hydrocarbons (S2) in oil shale before and after pyrolysis are measured. The results show that under 10 MPa pressure, the content of pyrolysis hydrocarbons in the oil shale decreased from 40.96 mg/g to 0.08 mg/g after pyrolysis. This confirms the feasibility of the temperature conditions for the in situ conversion of oil shale based on the hydration reaction of CaO-CM.
Open AccessThe Feasibility Study of In Situ Conversion of Oil Shale Based on Calcium-Oxide-Based Composite Materia Hydration Exothermic Reaction
Oil shale, as a vast potential resource, is considered an important alternative energy source, and its effective development and economic utilization are of significant importance in alleviating the contradiction between energy supply and demand. Presently, the in situ conversion technology for oil shale has gained significant global attention, with numerous extraction methods undergoing active research and development. One of these methods is the in situ conversion of oil shale based on the hydration reaction of calcium-oxide-based composite material (CaO-CM). This approach harnesses the heat produced by the reaction between CaO-CM and water as a heat source for the pyrolysis of oil shale. This paper conducted experiments to assess the feasibility of temperature associated with this method. The feasibility study mainly includes two aspects: First, it is necessary to investigate whether the temperature generated by the hydration reaction of CaO-CM can meet the temperature requirements for the pyrolysis of oil shale. Through pyrolysis experiments of Xinjiang oil shale, the minimum temperature required for oil shale pyrolysis was determined to be 330 °C. High-temperature and high-pressure reaction vessels were employed to explore the temperature generated by the hydration reaction of CaO-CM. The results show that with the increase in environment pressure, environment temperature, and reaction mass, the maximum temperature generated by the hydration reaction of CaO-CM also increases (reach 455.5 °C), meeting the temperature requirements for the pyrolysis of oil shale. Second, the study evaluates whether the hydration reaction of CaO-CM can induce pyrolysis hydrocarbons of the oil shale. Through the pyrolysis experiments of oil shale based on the hydration reaction of CaO-CM, the changes in the content of pyrolysis hydrocarbons (S2) in oil shale before and after pyrolysis are measured. The results show that under 10 MPa pressure, the content of pyrolysis hydrocarbons in the oil shale decreased from 40.96 mg/g to 0.08 mg/g after pyrolysis. This confirms the feasibility of the temperature conditions for the in situ conversion of oil shale based on the hydration reaction of CaO-CM.
- Open Access
- 24 January 2021
- Published by SAGE Publications in Energy Exploration & Exploitation
- Vol. 39 (5) , 1640-1665
Numerical modeling of complex hydraulic fracture networks based on the discontinuous deformation analysis (DDA) method
Hydraulic fracturing is one of the most important technologies for shale gas production. Complex hydraulic fracture networks can be stimulated in shale reservoirs due to the existence of numerous natural fractures. The prediction of the complex fracture network remains a difficult and challenging problem. This paper presents a fully coupled hydromechanical model for complex hydraulic fracture network propagation based on the discontinuous deformation analysis (DDA) method. In the proposed model, the fracture propagation and rock mass deformation are simulated under the framework of DDA, and the fluid flow within fractures is simulated using lubrication theory. In particular, the natural fracture network is considered by using the discrete fracture network (DFN) model. The proposed model is widely verified against several analytical and experimental results. All the numerical results show good agreement. Then, this model is applied to field-scale modeling of hydraulic fracturing in naturally fractured shale reservoirs. The simulation results show that the proposed model can capture the evolution process of complex hydraulic fracture networks. This work offers a feasible numerical tool for investigating hydraulic fracturing processes, which may be useful for optimizing the fracturing design of shale gas reservoirs.
- 24 January 2021
- Published by SAGE Publications in Energy Exploration & Exploitation
- Vol. 39 (5) , 1640-1665
Open AccessNumerical modeling of complex hydraulic fracture networks based on the discontinuous deformation analysis (DDA) method
Hydraulic fracturing is one of the most important technologies for shale gas production. Complex hydraulic fracture networks can be stimulated in shale reservoirs due to the existence of numerous natural fractures. The prediction of the complex fracture network remains a difficult and challenging problem. This paper presents a fully coupled hydromechanical model for complex hydraulic fracture network propagation based on the discontinuous deformation analysis (DDA) method. In the proposed model, the fracture propagation and rock mass deformation are simulated under the framework of DDA, and the fluid flow within fractures is simulated using lubrication theory. In particular, the natural fracture network is considered by using the discrete fracture network (DFN) model. The proposed model is widely verified against several analytical and experimental results. All the numerical results show good agreement. Then, this model is applied to field-scale modeling of hydraulic fracturing in naturally fractured shale reservoirs. The simulation results show that the proposed model can capture the evolution process of complex hydraulic fracture networks. This work offers a feasible numerical tool for investigating hydraulic fracturing processes, which may be useful for optimizing the fracturing design of shale gas reservoirs.