RJRashed Jalil

Rashed Jalil

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Rashed Jalil has a total of 219 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Tailoring the Electrocatalytic Performance of Bimetallic NiCu–MOFs via Anthranilic Acid Organic Linker Engineering and Graphene Oxide Integration

    by Muhammad Asghar, Ashi Rashid, Rashid Jalil, Abid Ali, Nadiah Al‐Mutlaq, Mashael M. Alharbi, Imene Bayach, Amel Y. Ahmed

    Metal‐organic frameworks (MOFs) are advanced structures which have already been explored for their high efficiency as electrocatalysts for sustainable energy conversion reactions, due to growing energy demands. This study tackles the major limitations of pristine MOFs in terms of poor conductivity and stability with a rational design strategy. A novel bimetallic NiCu–MOF was synthesized via solvothermal method using a multifunctional organic linker anthranilic acid, and then a conductive composite (NiCu–MOF/GO) was obtained by combining NiCu–MOF and graphene oxide (GO). Comprehensive characterization indicates the successful formation of the crystalline MOF and the uniform dispersion of the MOF on the GO sheets. The composite architecture is shown to be transformative through electrochemical testing. The NiCu‐MOF/GO composite shows a much lower overpotential of 252 mV at 10 mA cm − 2 for the OER with a Tafel slope of 61 mV/dec, significantly better than the pristine MOF (422 mV, 169 mV/dec). It also shows the best hydrogen evolution reaction (HER) activity (154 mV) and good kinetics. The composite has a large electrochemically active surface area and very high stability over 30 h. This work underscores the synergy between tailored ligand chemistry, bimetallic nodes, and conductive carbon engineering for creating high‐performance electrocatalysts.

  • First-principles insights into lead-free K2AgRhX6 (X = F, Cl, Br, I) halide double perovskites as stable platforms for next-generation optoelectronic and energy conversion devices

    by Farooq Afzaal, Rashid Jalil, Ibtsam Riaz, Nawaz Muhammad, G. Murtaza, Maha Naeem, Muhammad Moin, Hafiz Irfan Ali

    Context Double perovskites have emerged as promising candidates for renewable energy technologies due to their structural simplicity and thermodynamic stability. Among them, K2AgRhF6 is the most stable (-2.54 eV/atom), consistent with its highest bulk modulus (64.15 GPa), tolerance factor (0.85), and octahedral factor (0.86). Elastic analysis indicates ductile behavior for K2AgRhF6 (ν = 0.35, B/G = 3.13) and K2AgRhBr6 (ν = 0.28, B/G = 1.99), while K2AgRhCl6 (ν = 0.26, B/G = 1.75) and K2AgRhI6 (ν = 0.13, B/G = 2.37) lie near the brittle-ductile threshold. Band structure calculations reveal semiconducting gaps of 2.56 eV (F), 2.03 eV (Cl), 1.44 eV (Br), and 0.55 eV (I), with K2AgRhBr6 and K2AgRhI6 exhibiting strong optical absorption in the visible spectrum. Thermoelectric analysis yields figures of merit approaching 0.75 at room temperature across the series, highlighting their efficiency in energy conversion. Collectively, these findings position K2AgRhX6 halide double perovskites as robust, lead-free multifunctional materials with integrated structural stability, tunable optoelectronic response, and promising thermoelectric efficiency for next-generation optoelectronic devices. Method In this work, density functional theory (DFT) calculations within the WIEN2k framework were used to explore the structural, mechanical, electronic, optical, and thermoelectric properties of halide-based double perovskites K2AgRhX6 (X = F, Cl, Br, I). All compounds crystallize in the cubic Fm3ˉm (225) space group, and their negative formation energies confirm thermodynamic stability.


  • Retraction
    Open Access

    Retraction Note: Application of Fe-RGO for the removal of dyes by catalytic ozonation process

    by Umair Yaqub Qazi, Rabia Iftikhar, Amir Ikhlaq, Ibtsam Riaz, Rashid Jaleel, Rabia Nusrat, Rahat Javaid

  • Retracted

    Application of Fe-RGO for the removal of dyes by catalytic ozonation process

    by Umair Yaqub Qazi, Rabia Iftikhar, Amir Ikhlaq, Ibtsam Riaz, Rashid Jaleel, Rabia Nusrat, Rahat Javaid

    Due to continuous industrialization, the discharge of hazardous dyes has enormously disrupted the ecosystem causing environmental problems. Due to the stable recalcitrant nature of dyes, advanced catalytic ozonation processes with the latest catalyst are under investigation. Fe-RGO is an effective oxidation catalyst, and the metal loaded platform provides enhanced catalytic performance. This study aims to investigate the effectiveness of Fe-RGO/O3 process for the removal of dyes. In the current research, the application of iron-coated reduced graphene oxide (Fe-RGO) was studied as a catalyst in the heterogeneous catalytic ozonation process to remove dyes. Methylene blue (MB) was selected as a model pollutant. RGO was prepared using the improved Hummers method and was coated with iron (Fe) implying the impregnation method. The FTIR, SEM–EDX, XRD, and BET analyses of RG and Fe-RGO were performed to characterize the catalyst. The effect of various parameters such as pH (3–10), catalyst dose (0.01–0.04 g), and radical scavengers (NaHCO3, NaCl) on removal efficiency was elucidated. The result revealed an excellent catalytic efficiency of Fe-RGO in the ozonation process. At optimum conditions, 96% removal efficiency was achieved in catalytic ozonation at pH 7 with a catalyst dose of 0.02 g and ozone dose 0.5 mg/min, after 10 min. Interestingly, a slight decrease in removal efficiency was observed in the catalytic ozonation process in hydroxyl radical scavengers (NaCl and NaHCO3), which makes the proposed catalyst more applicable in real conditions. Therefore, it is concluded that Fe-RGO can be used as an excellent catalyst for the removal of dyes in real conditions where radical scavengers may be present in a significant amount.


  • Creep strain and recovery analysis of polypropylene composites filled with graphene nano filler

    by Ayesha Naz, Ibtsam Riaz, Rashid Jalil, Shama Afzal, Abdul Qayyum Khan


  • Open Access

    Imaging Two Dimensional Materials and their Heterostructures

    by R Zan, Q M Ramasse, R Jalil, J-S Tu, U Bangert, K S Novoselov

    Stacking different two-dimensional (2D) atomic layers is a feasible approach to create unique multilayered van der Waals heterostructures with desired properties. 2D materials, graphene, hexagonal boron nitride (h-BN), molybdenum disulphate (MoS2) and graphene based van der Waals heterostructures, such as h-BN/graphene and MoS2/graphene have been investigated by means of Scanning Transmission Electron Microscopy (STEM).


  • Extremely sensitive magnetoresistance sensors using few-layer graphene/boron-nitride

    by K. Gopinadhan, Y. Shin, R. Jalil, T. Venkatesan, A. Geim, A. Castro Neto, H. Yang

    Summary form only given. Understanding magnetoresistance, the change in electrical resistance upon an external magnetic field, at the atomic level is of great interest both fundamentally and technologically. Graphene and other two dimensional (2D) layered materials provide an unprecedented opportunity to explore magnetoresistance (MR) at the atomic scale. Here we report the application of graphene as a magnetoresistance sensor based on our magneto-transport measurement results. We see a gate voltage tunable giant magnetoresistance (MR) of ~ 400% at 1.9 K. The single layer graphene was prepared by micromechanical exfoliation of Kish graphite followed by a transfer to a highly p-doped Si substrate, which was covered by a layer of 300 nm thick SiO2. On increasing the strength of the magnetic field, the resistivity shows an oscillation characteristic of a two dimensional system. We discuss this in terms of Shubnikov-de Haas (SdH) oscillations. The oscillations are not dependent on the polarity of the magnetic field, however a large increase in resistivity is observed upon an external magnetic field. The MR exhibits clear SdH oscillations on top of a large positive background. It is understood that a large positive MR background is a result of inhomogeneous Drude conductivity in the sample. The gate tunability of the MR implies that the intrinsic character of graphene is the source of the observed MR phenomenon. A large room temperature MR of ~ 270% is also observed. The MR is nearly temperature independent due to the very small temperature coefficient of resistance of graphene which makes it very attractive for applications. The SdH oscillations seen in the MR at low temperatures disappears as the temperature is increased progressively implying the important role of classical effects in leading a large magnetoresistance at room temperature. In addition, we report an extremely large local magnetoresistance of ~ 2,000% at 400 K in few-layer graphene/boron-nitride heterostructures as shown in Fig. 1(a). We provide experimental evidence to show that few-layer graphene can be an electronic material for MR sensors at both low and high magnetic fields, and at practical device operating temperatures of upto 400 K, with a very small temperature coefficient of resistance. Furthermore, we show that the MR is electric field tunable thus providing additional functionalities to the sensor. Finally, we show that Ettingshausen-Nernst effect based non-local MR sensors can exhibit MR > 90,000% at room temperature as shown in Fig. 1(b).

  • Open Access

    Extremely large magnetoresistance in few-layer graphene/boron–nitride heterostructures

    by Kalon Gopinadhan, Young Jun Shin, Rashid Jalil, Thirumalai Venkatesan, Andre K. Geim, Antonio H. Castro Neto, Hyunsoo Yang

    Understanding magnetoresistance, the change in electrical resistance under an external magnetic field, at the atomic level is of great interest both fundamentally and technologically. Graphene and other two-dimensional layered materials provide an unprecedented opportunity to explore magnetoresistance at its nascent stage of structural formation. Here we report an extremely large local magnetoresistance of∼2,000% at 400 K and a non-local magnetoresistance of >90,000% in an applied magnetic field of 9 T at 300 K in few-layer graphene/boron–nitride heterostructures. The local magnetoresistance is understood to arise from large differential transport parameters, such as the carrier mobility, across various layers of few-layer graphene upon a normal magnetic field, whereas the non-local magnetoresistance is due to the magnetic field induced Ettingshausen–Nernst effect. Non-local magnetoresistance suggests the possibility of a graphene-based gate tunable thermal switch. In addition, our results demonstrate that graphene heterostructures may be promising for magnetic field sensing applications.