ANAananthi Namasivayam

Aananthi Namasivayam

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aananthi Namasivayam has a total of 47 co-authors. Here are the top co-authors by number of shared publications:

  • R. Amutha

    Department of Seed Science and Technology, Agricultural College and Research Institute, Tamil Nadu Agricultural University, Madurai 625 104, Tamil Nadu, India

    4 shared publications
  • Christina G Raiza

    Department of Plant breeding and genetics, Agricultural College and Research Institute, Tamil Nadu Agricultural University, Madurai- 625104, India

    3 shared publications
  • A Sheeba

    Plant Breeding and Genetics, Krishi Vigyan Kendra, Tamil Nadu Agricultural University (TNAU), Tirur 602 025, Tamil Nadu, India

    2 shared publications
  • C Parameswari

    Agricultural Research Station, Tamil Nadu Agricultural University, Vaigai Dam 625 562, Tamil Nadu, India

    2 shared publications
  • M Gunasekaran

    Department of Plant Breeding and Genetics, Agricultural College and Research Institute, Tamil Nadu Agricultural University, Madurai, Tamil Nadu 625 104, India

    2 shared publications
  • Madhavan Arumugam Pillai

    Department of Plant Breeding and Genetics, V.O.C. Agricultural College and Research Institute, Tamil Nadu Agricultural University, Killikulam, Vallanadu, Tamil Nadu, India

    2 shared publications

Latest Publications

  • Open Access

    Comparative evaluation of economic returns and water-saving efficiency of IoT-based smart drip irrigation and conventional irrigation methods in maize (Zea mays L.)

    by P Prema, B Sivasankari, N Aananthi, M Marimuthu, S Arokiamary, S R J Arockia, K P Kishore

    Precision irrigation is critical for improving water productivity in maize under conditions of increasing water scarcity and climate variability. This study evaluated the impact of internet of things (IoT)-based smart drip irrigation and irrigation scheduling strategies on yield, water-use efficiency and economic returns of hybrid maize. Eight irrigation treatments, including IoT-based sensor-controlled drip irrigation, pan evaporation (PE)-based scheduling, irrigation water/cumulative pan evaporation ratio (IW/CPE) methods, conventional drip irrigation, surface irrigation and flood irrigation, were evaluated under field conditions. In the IoT-based treatments, soil moisture sensors continuously monitored root-zone moisture and automatically initiated irrigation when soil water depletion reached either 60 % or 80 % of the available soil water (ASW), representing moderate and high allowable depletion levels respectively. In contrast, conventional drip irrigation was operated using fixed irrigation schedules without real-time soil moisture sensing or automated feedback control. Results indicated significant differences (p ≤ 0.05) among treatments. The IoT-based drip irrigation at 60 % ASW depletion recorded the highest grain and straw yields, with grain yield increasing by 39 % compared with flood irrigation. The same treatment achieved the highest water-use efficiency, producing 2.62 times more grain per unit of water applied and reducing irrigation water use by 47 %. Economic analysis showed that IoT-based irrigation generated the highest profitability, with net returns increasing by 88 % over flood irrigation. The results demonstrate that sensor-based automated drip irrigation scheduled at 60 % allowable soil water depletion is an efficient and economically viable strategy for improving maize productivity, water-use efficiency and water conservation under water-limited conditions.

  • Open Access

    Screening onion varieties for sodicity tolerance: Insights from physiological parameters and gene expression studies

    by R Amutha, N Aananthi, M Vetrivel, C Parameswari, M L Mini, S Nithila, C Rajababu, C Tamilselvi, P Prema, S Sheeba

    Sodicity is an important abiotic stress that limits crop production by altering many physiological and biochemical processes in plants. Onion is very sensitive to sodicity, which affects germination, plant growth and productivity. The present study was undertaken to screen onion varieties for sodicity tolerance. Fourteen bulb and four aggregatum onion (two seeds and two bulbs propagated) varieties were subjected to different levels of sodicity under laboratory conditions and physiological parameters were observed. Extent of sodicity tolerance was tested by assessing vigour index, stress tolerance index (STI), membrane stability index (MSI) and total dry matter production (TDMP). The results revealed that with increasing concentration of salts, vigour index, MSI, STI and TDMP decreased drastically. All 18 varieties screened displayed differential responses. Based on the outcome of the laboratory studies in sodic conditions, the identified sodicity-tolerant varieties, viz., Bhima Safed, CO 6 and Thuraiyur and sodicity susceptible varieties, viz., Bhima Red, CO 5 and Perambalur, were further selected for RT-PCR to assess the expression of abiotic stress genes under sodic soil. From the molecular studies it was evident that the sodicity-tolerant onion varieties Bhima Safed, CO 6 and Thuraiyur show stable expression of Glyceraldehyde-3-phosphate dehydrogenase (GAPDH), alternative oxidase (AOX) and Aquaporin (AQP) genes and are not affected by cultivation in sodic soil whereas the susceptible varieties viz., Bhima Red, CO 5, Perambalur showed downregulation of these genes. Investigating GAPDH, AOX and AQP signalling pathways will address the exact reason for the suppression of these genes under sodicity. Stable expression of the GAPDH gene may be used as a criterion for screening sodicity-tolerant onion varieties.

  • Marker assisted pyramiding of Pup1 and Saltol1 QTLs and recurrent parent genome recovery in elite rice variety CR 1009 Sub1

    by Raiza Christina G., Aananthi N., Gunasekaran M., Gnanamalar R.P., Merina Prem Kumari S., Amutha R., Saravana Pandian P.

  • Open Access

    Dissecting gene action for yield traits in rice using Line × Tester analysis

    by Christina G Raiza, N Aananthi, M Gunasekaran, R P Gnanamalar, S Merina Prem Kumari, R Amutha, P Saravana Pandian

    Rice (Oryza sativa L.) production is increasingly threatened by abiotic stresses, notably salinity and phosphorus (P) deficiency which constrain crop performance in vulnerable agro-ecosystems. The current study was designed to assess the combining ability of four Saltol 1 introgressed backcross inbred lines and two Pup1 introgressed testers through a Line × Tester mating design with the objective of identifying the nature of gene action of yield traits and superior parental genotypes and cross combinations for the genetic enhancement under stress-prone conditions. Eight F₁ hybrids along with six parental lines were assessed using a randomized complete block design with two replications during Rabi 2023-24. Analysis of variance revealed considerable genetic variability across all the traits studied. Combining ability analysis demonstrated that BIL 33, D5-1-3-2-1 and C16-1-2-8 were superior general combiners, particularly for grain yield and associated component traits while cross combinations such as BIL 33 × C16-1-2-8 and BIL 1102 × D5-1-3-2-1 exhibited significant specific combining ability effects reflecting the yield potential of hybrids. Variance component analysis further indicated that traits such as days to 50% flowering, plant height and grain yield were chiefly administered by additive gene action whereas traits viz., flag leaf length, spikelet fertility and grain number were influenced by non-additive action. These findings provide valuable insights into the genetic construction of key agronomic traits and offer a strong basis for breeding stress-resilient, high-yielding rice hybrids.

  • Open Access

    Estimation of genetic variability and association studies for yield in the OsPSTOL1 gene introgressed F4 in rice (Oryza sativa L.) for phosphorus deficiency tolerance

    by N Aananthi, Y S K Mohamed, P M Arumugam, D Shoba, K Manikandan, V Nirubana, J Ramalingam, C G Raiza

    In India, nearly 85 % of the soils are phosphorus-deficient, significantly limiting rice production. Yield improvement based solely on phenotypic selection is challenging due to its polygenic control. This study aimed to identify superior segregants with high yield potential and phosphorus deficiency tolerance. During the Rabi season of 2020, an F4 population derived from the cross Anna (R) 4 × IR 64 Pup1 was evaluated under a non-replicated trial at the Agricultural College and Research Institute, Killikulam. Observations were recorded for eight biometrical traits. A high magnitude of variability was observed among the genotypes, as indicated by high mean values and a wide range for all studied traits. Phenotypic coefficient of variation (PCV) was higher than genotypic coefficient of variation (GCV), signifying environmental influence, while high heritability was observed for most traits. Traits such as the number of tillers per plant, number of productive tillers per plant, number of filled grains per panicle, phosphorus content in shoot, hundred-seed weight and single-plant yield exhibited high heritability coupled with high genetic advance as a percentage of the mean, indicating the predominance of additive gene action, thus making selection effective. Correlation analysis revealed that days to 50 % flowering, number of tillers per plant and panicle length had a strong positive association with grain yield per plant, suggesting their significance in yield improvement. Path analysis indicated that panicle length (0.3012) had the highest positive direct effect on grain yield per plant, followed by phosphorus content in shoot (0.2366), number of productive tillers per plant (0.1965), hundred-seed weight (0.1623) and number of filled grains per panicle (0.1423), while acid phosphatase (-0.172) and number of tillers per plant (-0.0923) had negative direct effects. Based on the overall evaluation, eleven superior families (AI-17, AI-15, AI-19, AI-16, AI-84, AI-64, AI-53, AI-71, AI-82, AI-48 and AI-11) were identified for further breeding programs aimed at improving phosphorus starvation tolerance in rice.

  • Open Access

    Augmenting brinjal productivity through foliar biostimulant application of symbiotic co-culture of acetic acid bacteria and yeast fermented cashew apple juice: A sustainable approach

    by T Jayalakshmi, G Gayathry, N Aananthi, S Rajaguru, K Kumutha, K G Sabarinathan

    The study evaluated the efficacy of Symbiotic Co-culture of Bacteria and Yeast (SCOBY), primarily Komagataeibacter rhaeticus and Brettanomyces bruxellensis as a biostimulant to enhance brinjal (Solanum melongena) growth and productivity. In India, ~90 % of cashew apples are discarded during cashew nut production. This study utilized SCOBY cultured in cashew apple waste as biostimulant foliar spray in a field experiment conducted in Semberi village, Cuddalore district (2023 - 2024), using the traditional Semberi brinjal variety in a Randomized Block Design (RBD) with three replications. Eight different foliar treatment combinations, involving cell-free extracts of SCOBY cultured in cashew apple juice were applied at 30, 45 and 60 Days After Transplanting (DAT). Growth and yield parameters were recorded throughout the season. Among the treatments, a 50:50 ratio of 1 % cashew apple juice-fermented SCOBY and 1 % Pink Pigmented Facultative Methylotrophs (PPFM) (T8) produced a significant amount of growth-promoting phytohormones, with 26.81 µg/mL of Indole-3-Acetic Acid (IAA) and 87.4 µg/mL of Gibberellic Acid (GA3), which enhanced root development, stem elongation and flowering in brinjal. T8-treated plants recorded a maximum height (163.02 cm), leaf area (88.27 cm²) and the highest chlorophyll content (35.90). These plants recorded earlier flowering (50 % flowering in 41 days), produced more flowers (47 flowers/ plant) and yielded more and larger fruits (14 fruits/ plant, with a length of 20 cm and girth of 7.1 cm), resulting in a maximum yield of 3.1 kg/ plant, compared to the control (1.8 kg/ plant). Additionally, nutrient uptake was higher in T8-treated plants (95.81 kg/ha N, 25.23 kg/ha P and 99.56 kg/ha K). Principal Component Analysis (PCA) confirmed a strong correlation between T8 treatment and improved yield parameters. This study highlights cashew apple juice-fermented SCOBY as a sustainable, eco-friendly biostimulant that enhances brinjal productivity, recycles agricultural waste and supports regenerative agriculture.

  • Open Access

    Principal component analysis (PCA) and genetic diversity studies for discrimination of genotypes and yield parameters in ICRISAT Pearl Millet [Pennisetum glaucum (L.) R. Br.] accessions

    by N Aananthi, A Sheeba, R Annamalai, D Shoba, P M Arumugam

    PCA and cluster analysis were used to assess 50 pearl millet genotypes for 26 attributes to identify associations among individuals as well as their traits and patterns of variation. Among 26 PCs (Principal Components), eight unveiled eigenvalues greater than one, which accounted for 78.29 % of the total variability among the traits. The first component (PC1) had a great maximum variability of about 18.53 % with the highest eigenvalue. It was observed that PC1 revealed maximum variation in comparison with other 25 PCs, whereas PC2 to PC8 showed gradual reduction in variability with values 17.38, 11.71, 8.17, 7.37, 5.63, 5.0 and 4.49 percent respectively. Therefore, selecting lines and traits based on PC1 would be beneficial. The factor loading of PCs exhibited that PC1 accounted for maximum variability for traits like NTrPP (number of tillers per plant), LAI (leaf area index) and GY (grain yield) per plant. PC2 counted for 17.38 % of the total variance and exhibited the greatest variability for number of leaves per plant (NLPP). PC3 showed 11.71 % variability and taken maximum variability for leaf:stem ratio (LSR). PC4 exhibited 8.17 % of variability and possessed maximum variability for plant height (PtH), leaf width (LfW), flag leaf width (FgLW) and stem girth (SG) which pointed out the huge impact in the total variation of the genotypes. Cluster analysis recorded cluster III had desirable mean values for most of the traits studied. The genotype, viz. IP 8327 from cluster III would be used as parent for pearl millet improvement program.


  • Open Access

    Insights into the genetic basis of yield and its components in rice (Oryza sativa L.) through generation mean analysis

    by G Raiza Christina, N Aananthi, M Gunasekaran, R P Gnanamalar, Prem Kumari S Merina, R Amutha, P Saravana Pandian

    Generation mean analysis conducted was to recognize the inheritance patterns of yield-related traits in rice populations developed from crosses between salinity-tolerant (Saltol 1 QTL) and phosphorus (P) starvation-tolerant (Pup1 QTL) backcross inbred lines. The study involved four crosses: BIL33 × C16-1-2-8, BIL752 × D5-1-3-2-1, BIL1094 × C16-1-2-8 and BIL1102 × D5-1-3-2-1, aimed at developing multiple stress-tolerant versions of CR 1009 Sub1 and ADT 37 varieties. Six generations - Pt1, Pt2, F1, F2, BC1 F and BC2F were evaluated for thirteen quantitative traits during Kharif 2023-2024 at Agricultural College and Research Institute, TNAU, Madurai. Scaling tests revealed significant epistatic interactions for most traits across crosses. Grain yield showed complementary epistasis with significant interaction effects in all crosses, while traits like plant height and flag leaf characteristics displayed varying patterns of gene action. The existence of both additive and non-additive gene effects raises the possibility that selection may be postponed to future generations. The study advises maintaining larger populations during the initial generations and applying pedigree selection from the F4 generation onward to achieve effective trait enhancement. These findings provide valuable insights for developing breeding strategies to pyramid salinity and phosphorus starvation tolerance in rice varieties.

  • Open Access

    A comprehensive study on the stability of Desi cotton (Gossypium arboreum) genotypes under rainfed conditions using AMMI and GGE biplot analysis

    by A Sheeba, P Yogameenakshi, S H Ramakrishnan, N Aanandhi, K Baskar

    The present study aims to assess the stable and adaptable cotton genotypes under rainfed vertisol conditions using Additive Main effects Multiplicative Interaction and Genotype and Genotype × Environment (GGE) biplot analyses. Seventeen cotton genotypes were evaluated for seed cotton yield at the Agricultural Research Station, Kovilpatti, over three years (2020, 2021 and 2022), treated as distinct environments. Seed cotton yield was subjected to pooled ANOVA, AMMI and GGE biplot analysis, revealing significant variation between genotypes, environment and GEI, with the climate and G × E interaction accounting for 33.8 % and 27.8 % of the total variation, respectively, in seed cotton yield. Based on AMMI I analysis, the genotypes G5 (TKA 0856) and G13 (TKA 1336) were found to have overall adaptability in all the environments (years) studied and considered stable genotypes. GGE biplot was plotted for seed cotton yield using PC1 and PC2, accounting for 70.2% and 26.2 %, respectively, explaining 96.4 % of the total GEI variance. The winning genotypes identified for three mega-environments are G2 (TKA 0612), G16 (TKA 1104) for the first, G6 (TKA 1035), G13 (TKA 1336) for the second and G11 (TKA 1326), G4 (TKA 0848) for the third respectively. The genotype G6 (TKA 1035) was chosen as the most ideal genotype based on mean vs. stability analysis. Among the test environments, E1 was considered the most discriminating environment suitable for selecting widely adapted genotypes.


  • Open Access

    Mitigating moisture stress in bhendi through osmolyte application

    by R Amutha, C Parameswari, R Gowthami, M P Kavitha, G Sudhakar, P Geetharani, M Madhan Mohan, S Nithila, N Aananthi

    The purpose of this study was to identify the best osmolyte for foliar application to overcome moisture stress under field conditions in Bhendi (Abelmoschus esculentus L. Moench). Foliar applications of the osmolytes, viz., proline (50 mM), glycine betaine (50 mM), ascorbic acid (100 ppm), salicylic acid (100 ppm) and KCl (1 %) were applied twice, at 25 and 45 days after sowing (DAS), to mitigate moisture stress imposed by withholding irrigation during the vegetative and reproductive phases of crop growth. Data on yield parameters and yield were recorded. The results revealed that, in terms of the yield attributes, foliar sprays of proline (50 mM) resulted in increased pod length (12.2 cm) and higher pod yield per plant (335.1 g) in Bhendi. However, the highest benefit cost ratio of 1.52 and 1.23 was obtained by applying KCl (1%) followed by salicylic acid (100 ppm) during moisture stress at the reproductive stage. From the study, it is concluded that foliar sprays of proline (50 mM) and salicylic acid (100 ppm) were effective in mitigating moisture stress under field conditions in Bhendi.