Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Safia Khan has a total of 135 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    3D self-supporting PANI/CNT/CC composite cathode coupled with CNF/PAM dual network gel electrolyte for high specific capacity flexible zinc-ion battery

    by Jiayi Li, Cong Wang, Kangkang Zhao, Sabeen Fatima, Xiaoxiao Zheng, Yu Sun, Muyang Li, Nan Han, Lei Han, Yafei Ning, et al.

    In this work, PANI/CNT/CC composite is developed as a positive electrode for flexible zinc-ion battery (ZIB) with the high specific capacity. Assembled flexible batteries are subjected to electrochemical testing. A double grid structure constructed by CNT modification of polyaniline nanofiber network on carbon cloth and CNF modification of PAM gel further improved its flexibility and bending ability. The optimized battery exhibits a high specific capacity of 210 mA hg⁻¹ at a current density of 0.5 A g⁻¹, i.e., a marked improvement in rate performance and bending stability. Following 800 charge and discharge cycles at a current density of 2 A g⁻¹, the battery demonstrates an impressive capacity retention rate of approximately 90.6% along with a notable average coulombic efficiency of 98.7%, underscoring its remarkable strength and stability. The PANI/CNT/CC|CNF/PAM|Zn battery can power the device when it is bent or even folded. Such enhanced electrochemical performance of optimized ZIB is originated from synergistic coupling between the 3D cathode and CNF/PAM dual-network hydrogel electrolyte, which simultaneously facilitates electron transport, Zn 2+ ion diffusion, and interfacial stability.

  • Open Access

    RETRACTED: Ahmad et al. Lanthanum-Zinc Binary Oxide Nanocomposite with Promising Heterogeneous Catalysis Performance for the Active Conversion of 4-Nitrophenol into 4-Aminophenol. Coatings 2021, 11, 537

    by Ikram Ahmad, Muhammad Asghar Jamal, Miara Iftikhar, Awais Ahmad, Shahid Hussain, Humaira Asghar, Muhammad Saeed, Ammar Bin Yousaf, Rama Rao Karri, Nada Sulaymaniyah Al-Kadhi, et al.

    The journal retracts the article titled “Lanthanum-Zinc Binary Oxide Nanocomposite with Promising Heterogeneous Catalysis Performance for the Active Conversion of 4-Nitrophenol into 4-Aminophenol”

  • Open Access

    Energy Dispersion Relationship and Hofstadter Butterfly of Triangle and Rectangular Moiré Patterns in Tight Binding States

    by Ziheng Li, Jiangwei Liu, Xiaoxiao Zheng, Yu Sun, Nan Han, Liang Wang, Muyang Li, Lei Han, Safia Khan, S. Hassan M. Jafri, et al.

    Herein, the energy dispersion relationship and the density of states of triangular and rectangular moiré patterns are investigated using a tight binding model. Their characteristics of Hofstadter butterflies under different magnetic fields are also examined. The results indicate that, by analyzing different moiré superlattices, Hofstadter butterflies arising from different moiré pattern structures are obtained, exhibiting considerable fractal characteristics and self-similarities. Moreover, it is also observed that under an alternating magnetic field, the redistribution of electronic states leads to a significant change in the density of states curve, and the Van Hove peak changes with the increase in magnetic field intensity. This study enriches the understanding of the electronic behavior of moiré systems, but it also provides multiple potential application directions for future technological development.

  • Innovative nanomaterials revolutionizing clinical biosensor development: a review

    by S. Aftab, B. Aslam, S. Khan, Z. Baloch

    Nanomaterial-based biosensors have advanced rapidly as transformative technology in clinical diagnostics, offering unparalleled sensitivity, selectivity and versatility. This review provides a comprehensive analysis of the latest developments in biosensors incorporating nanostructured materials, with a focus on their clinical applications. We discuss the wide variety of nanomaterials used in biosensor production, such as carbon-based nanomaterials, metal nanoparticles, quantum dots and two-dimensional materials like graphene and transition metal dichalcogenides. Furthermore, we examine how these nanomaterials are integrated into different biosensing platforms, including electrochemical, optical, and surface plasmon resonance sensors. We emphasize their ability to rapidly and accurately detect clinically relevant biomarkers and analytes. The review offers an in-depth evaluation of the current state of nanostructured biosensor technology and pinpoints critical areas for future research and innovation in this rapidly evolving field. The bibliography includes 275 references.


  • Modifications in Subsurface of Catalysts: Impact of Bringing in Electrophilicity on Catalytic Applications

    by Safia Khan, Hu Li

    Surface, interface, and subsurface in catalysts are broadly perceived as independent units in materials, relying on diverse bonding environments and are recurrently studied discretely because of experimental challenges in distinguishing the surface and subsurface effects. Metal crystals, isolated atoms, or metal nanoparticles in supported catalysts induce an electrophilic nature in subsurface, enhancing the catalysis efficiency. In this review, the influence of modification in subsurface of catalysts and their specific catalytic outputs are discussed. Key approaches and techniques for insertion of subsurface modifications and impact of electrophilicity upon catalysis upgradation are observed. A compilation of frequently used chemical reactions catalyzed by subsurface‐modified catalysts have been structured and thoroughly illustrated.


  • Open Access

    High Performance Self-Powered Photodetectors Based on Graphene Nanoribbons/Al2O3/InGaZnO Heterojunctions

    by Xiaoling Ye, Xiaoxiao Zheng, Lei Han, Yu Sun, Liang Wang, Ziheng Li, Wencheng Liu, Benqing Liu, Nan Han, Safia Khan, et al.

    Self-powered photodetectors which operate without external power sources hold immense promise in future photodetection systems. To achieve high-performance self-powered optoelectronic devices, efficient electron-hole pair separation is critical to generate high photocurrents. In this work, we successfully synthesized semiconducting graphene nanoribbons (GNRs) with a direct bandgap of 1.80 eV and employed them to construct a high-performance GNR/Al 2 O 3 /IGZO heterostructure photodetector. The built-in electric field in the heterojunctions enables this photodetector to exhibit remarkable performance, showing a responsivity of up to 68 mA/W, a detectivity of 8.34 × 10 10 Jones, and rapid response times of 21/20 ms at zero bias. Furthermore, the photodetector features a wide spectral detection range of 405 to 1550 nm. These results highlight the promising potential of GNR/IGZO p-n heterojunction-based self-powered photodetectors in optoelectronic applications.


  • Open Access

    Synthesis and Antimicrobial Analysis of High Surface Area Strontium-Substituted Calcium Phosphate Nanostructures for Bone Regeneration

    by Aneela Anwar, Qudsia Kanwal, Ayesha Sadiqa, Tabassam Razaq, Iqra Haider Khan, Arshad Javaid, Safia Khan, ElSayed Tag-Eldin, Mohamed Ouladsmane

    Continuous microwave-assisted flow synthesis has been used as a simple, more efficient, and low-cost route to fabricate a range of nanosized (2+ ion source) and diammonium hydrogen phosphate at pH 10 with a time duration of 5 min. The morphological characterization of the obtained powder has been carried out by employing techniques such as transmission electron microscopy, X-ray diffraction, and Brunauer–Emmett–Teller surface area analysis. The chemical structural analysis to evaluate the surface properties was made by using X-ray photoelectron spectroscopy. Zeta potential analysis was performed to evaluate the colloidal stability of the particles. Antimicrobial studies were performed for all the compositions using four bacterial strains and an opportunistic human fungal pathogen Macrophomina phaseolina. It was found that the nanoproduct with high strontium content (15 wt% of strontium) showed pronounced antibacterial potential against M. luteus while it completely arrested the fungal growth after 48 h by all of its concentrations. Thus the synthesis strategy described herein facilitated the rapid production of nanosized Sr-substituted CaPs with excellent biological performance suitable for a bone replacement application.


  • Open Access

    Photocatalytic Degradation Studies of Organic Dyes over Novel Cu/Ni Loaded Reduced Graphene Oxide Hybrid Nanocomposite: Adsorption, Kinetics and Thermodynamic Studies

    by Amina Kanwal, Tayyaba Shahzadi, Tauheeda Riaz, Maria Zaib, Safia Khan, Mohamed A. Habila, Mika Sillanpaa

    Nowadays, for environmental remediation, photocatalytic process involving graphene-based semiconductors is considered a very promising oxidation process for water treatment. In the present study, nanocomposite (Cu/Ni/rGO) has been synthesized by Dypsis lutescens leaf extract. Characterization of the sample was carried out by UV-visible spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray (EDX) analysis, Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). Different parameters like contact time, nanocatalyst amount, dye concentration, effect of temperature. and pH factor were optimized to examine the maximum removal efficiency for dyes rhodamine B and alizarine R with and without visible light source. In both cases, i.e., with or without light, maximum removal was observed at 20 mg of nanocatalyst for 5 ppm concentration of both dyes at 45 °C temperature and pH 10 for rhodamine B and pH 4 for alizarine R, respectively with a 20 min contact time. Maximum removal of dyes 93% rhodamine B and 91% alizarine R were observed under a tungsten lamp as compared to without a tungsten lamp, i.e., 78% of RhB and 75% of AR from mixture solution of these dyes. To assess the rate of reaction, spontaneity, and nature of reaction thermodynamics, kinetics and adsorption isotherms were studied. Thermodynamic values indicated that both dyes depicted endothermic and spontaneous degradation processes. Isotherm data fitted best to a Freundlich isotherm, while results of kinetic studies of both dyes followed the pseudo 2nd order kinetic equation. In the end, scavenging radical studies concluded that hydroxyl radicals were the main active specie involved in the photocatalytic degradation process, and regeneration experiments resulted that Cu/Ni/rGO nanocomposites were re-utilized for about four times.


  • Alumina supported copper oxide nanoparticles (CuO/Al2O3) as high-performance electrocatalysts for hydrazine oxidation reaction

    by Safia Khan, Syed Sakhawat Shah, Naveed Kausar Janjua, Ayse Bayrakçeken Yurtcan, Muhammad Tariq Nazir, Khadijah Mohammedsaleh Katubi, Norah Salem Alsaiari


  • Open Access

    Microwave Assisted Preparation of Barium Doped Titania (Ba/TiO2) as Photoanode in Dye Sensitized Solar Cells

    by Awais Ahmad, Safia Khan, Mariam Khan, Rafael Luque, Mohammed Jalalah, Mabkhoot A. Alsaiari

    Pure TiO2 and barium (0.5 wt%) doped TiO2 (Ba/TiO2) nanostructures have been synthesized via facile microwave irradiation method. The pure anatase phase of synthesized photoactive material was confirmed by X-ray diffraction. Ba doping in the TiO2 host structure influenced the optical band gap as confirmed by UV-visible spectroscopy. The optical band gap increased from 3.21 eV for the TiO2 to 3.26 eV for Ba/TiO2. Morphological analysis of synthesized TiO2 and Ba/TiO2 was conducted using scanning electron microscopy. Energy dispersive X-ray spectroscopy confirmed the formation of Ba/TiO2 and no impurities were observed. Electrochemical impedance spectroscopy showed that the charge transfer resistance increased for Ba/TiO2, which reduced dark current creation in a dye-sensitized solar cell. The highest power conversion efficiency (3.24%) was achieved for Ba/TiO2 photoanode compared to 2.1% for a pure TiO2 photoanode-based device.