BJBrian Johnson

Brian Johnson

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Brian Johnson has a total of 60 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Real-Time Wave Energy Converter Control Using Instantaneous Frequency

    by Inyong Kim, Ted K. A. Brekken, Solomon Yim, Brian Johnson, Yue Cao, Pranav Chandran

    Wave Energy Converters (WECs) rely on effective Power Take-Off (PTO) control strategies to maximize energy absorption under dynamic sea conditions. Traditional hydrodynamic modeling techniques may require computationally intensive convolution calculations, making real-time control implementation challenging. This paper presents an alternative approach by leveraging instantaneous frequency estimation to dynamically adjust PTO damping in response to varying wave frequencies. Two real-time frequency estimation methods are explored: the Hilbert Transform (HT) and Phase-Locked Loop (PLL). The Hilbert Transform method provides accurate frequency tracking but introduces a delayed response due to its dependence on causal data. Conversely, the PLL approach demonstrates strong potential in frequency tracking but requires careful gain tuning, particularly in complex sea states. Comparative evaluations across multiple test cases—including sinusoidal variations, amplitude steps, frequency step changes, and real-world JONSWAP spectrum waves—highlight the strengths and limitations of each method. The two different PTO control techniques across the various frequency estimation methods were tested under real-sea states using a state-space model of a point-absorbing Wave Energy Converter. The Capture Width Ratio (CWR) is used as a performance metric, with results showing that the HT achieves a 10.6% improvement, while the PLL estimation yields a 0.9% improvement relative to the fixed parameter control baseline. These results highlight the effectiveness of real-time frequency estimation in improving energy absorption compared to static control parameters.


  • Large-Signal Stability Analysis of Grid-Forming Inverters With Equivalent-Circuit Models

    by Nathan Baeckeland, Diptak Pal, Gab-Su Seo, Brian Johnson, Sairaj Dhople

    This paper proposes an energy function-based direct method for large-signal stability assessment of grid-forming (GFM) inverters leveraging an equivalent-circuit representation of all involved control- and physical-layer dynamics. Three different primary controls, a standard inner-current outer-voltage cascaded-control architecture, output $LCL$ filter, and reference-current saturation limiting are featured in the modeling and analysis framework. A composite energy function for the GFM inverter is obtained by summing up individual energy contributions gleaned from the circuit representation. The approach can readily be generalized to different primary controls, output-filter arrangements, and current limiters since it is based on a circuit-theoretic foundation. Numerical simulations validate the efficacy of the approach in estimating the critical clearing time following a large-signal disturbance.


  • Open Access

    A Unified Approach for Learning the Dynamics of Power System Generators and Inverter-based Resources

    by Shaohui Liu, Weiqian Cai, Hao Zhu, Brian Johnson

    The growing prevalence of inverter-based resources (IBRs) for renewable energy integration and electrification greatly challenges power system dynamic analysis. To account for both synchronous generators (SGs) and IBRs, this work presents an approach for learning the model of an individual dynamic component. The recurrent neural network (RNN) model is used to match the recursive structure in predicting the key dynamical states of a component from its terminal bus voltage and set-point input. To deal with the fast transients especially due to IBRs, we develop a Stable Integral (SI-)RNN to mimic high-order integral methods that can enhance the stability and accuracy for the dynamic learning task. We demonstrate that the proposed SI-RNN model not only can successfully predict the component's dynamic behaviors, but also offers the possibility of efficiently computing the dynamic sensitivity relative to a set-point change. These capabilities have been numerically validated based on full-order Electromagnetic Transient (EMT) simulations on a small test system with both SGs and IBRs, particularly for predicting the dynamics of grid-forming inverters.


  • Open Access

    A Unified Approach for Learning the Dynamics of Power System Generators and Inverter-based Resources

    by Shaohui Liu, Weiqian Cai, Hao Zhu, Brian Johnson

    The growing prevalence of inverter-based resources (IBRs) for renewable energy integration and electrification greatly challenges power system dynamic analysis. To account for both synchronous generators (SGs) and IBRs, this work presents an approach for learning the model of an individual dynamic component. The recurrent neural network (RNN) model is used to match the recursive structure in predicting the key dynamical states of a component from its terminal bus voltage and set-point input. To deal with the fast transients especially due to IBRs, we develop a Stable Integral (SI-)RNN to mimic high-order integral methods that can enhance the stability and accuracy for the dynamic learning task. We demonstrate that the proposed SI-RNN model not only can successfully predict the component's dynamic behaviors, but also offers the possibility of efficiently computing the dynamic sensitivity relative to a set-point change. These capabilities have been numerically validated based on full-order Electromagnetic Transient (EMT) simulations on a small test system with both SGs and IBRs, particularly for predicting the dynamics of grid-forming inverters.

  • Top Cited Papers
    Open Access

    Overcurrent Limiting in Grid-Forming Inverters: A Comprehensive Review and Discussion

    by Nathan Baeckeland, Debjyoti Chatterjee, Minghui Lu, Brian Johnson, Gab-Su Seo

    Grid-forming (GFM) inverters are increasingly recognized as a solution to facilitate massive grid integration of inverter-based resources and enable 100% power-electronics-based power systems. However, the overcurrent characteristics of GFM inverters exhibit major differences from those of conventional synchronous machines. Accordingly, an in-depth characterization of GFM current-limiting strategies is needed to ascertain their performance during off-nominal conditions. Although GFM current-limiting controls are primarily necessary to protect the inverter power stage, they determine the inverter behavior during and after an off-nominal system disturbance. As a result, they can profoundly impact device-level stability, transient system stability, power system protection, and fault recovery. This article offers a comprehensive review of state-of-the-art current-limiting techniques for GFM inverters and outlines open challenges where innovative solutions are needed. One key contribution of this article is the use of graphical methods that allow for intuitive understanding and visually aided comparisons of current-limiting methods. With this approach, we evaluate various performance criteria for different limiting methods, such as fault current contribution, voltage support, stability, and post-fault recovery. We also discuss the latest standards and trends as they require inverter dynamics under off-nominal conditions and outline pathways for future developments.


  • Open Access

    Modular Wide-bandgap String Inverters for Low-cost Medium-voltage Transformerless PV Systems

    by Brian Benjamin Johnson

    The proposed technology combines advances in wide-bandgap power electronics with breakthroughs in distributed and decentralized control to produce ultra-low-cost medium-voltage transformerless PV inverters that are composed of stackable lightweight blocks. Taken together, the proposed circuit designs and accompanying control strategies will yield integrated control+circuit (C2) blocks, each comprising a converter and local controller, that can be assembled in a modular fashion to obtain distributed conversion interfaces for next-generation commercial and utility-scale PV systems. We will utilize SiC devices to obtain C2 blocks that can individually operate at a voltage and power in excess of 1 kV and 100 kW, respectively, such that ensembles of series-connected blocks perform direct dc to three-phase ac conversion at medium voltages (e.g., 12 kV–35 kV) and at multi-MW power levels.

  • Large-Signal Stability of Phase-Balanced Equilibria in Single-Phase Grid-Forming Inverter Systems

    by Minghui Lu, Weiqian Cai, Sairaj Dhople, Brian Johnson

    This article explores the setup where large numbers of single-phase grid-forming inverters with droop control across distribution networks self-organize into a stable and balanced system with $120^\circ$ phase offsets across aggregates in the absence of balanced three-phase generating resources or external communication. A suite of circuit- and system-theoretic notions are leveraged to derive a dynamical model for phase-angle differences across aggregates of inverters connected in the three phases. Focusing on this model, large-signal stability is established and the region of attraction of the phase-balanced equilibria is determined with the aid of a Lyapunov function. Experimental validation for a bench-top prototype network is included to support the analytical developments. Overall, the effort supports the vision of facilitating balanced operation of distribution networks with grid-forming inverters during service disruptions at the bulk transmission network.


  • Large-Signal Stability Analysis of Three-Phase Grid-Following Inverters

    by Diptak Pal, Bijaya Ketan Panigrahi, Brian Johnson, D. Venkatramanan, Sairaj Dhople

    This work analytically establishes a multi-variable energy function for a three-phase grid-following inverter leveraging a unified equivalent-circuit model for its physical- and control-layer subsystems. This is a significant contribution to the prior art in which analytical approaches to large-signal stability for inverters have largely been attempted with simplified models. Central to our effort is to cast physical- and control-layer dynamics of each dynamical subsystem as an equivalent circuit consisting of familiar circuit elements adopting a positive-sequence modeling framework. An energy function for the inverter is then constructively synthesized by summing the energy functions across the various subsystems that are readily derived from circuit-theoretic principles. Numerical simulations are presented to validate the equivalent-circuit model of the inverter as well as the efficacy of the synthesized energy function in characterizing large-signal stability following a disturbance.


  • Open Access

    A Universal Grid-forming Inverter Model and Simulation-based Characterization Across Timescales

    by Deepak Ramasubramanian, Evangelos Farantatos, Olaoluwapo Ajala, Sairaj Dhople, Brian Johnson

    The evolution of the power grid has given rise to a variety of innovations in inverter control architectures. Among these advances, a class of controllers has emerged with the aim of enabling 100\% inverter-based grids and these are known as grid-forming methods. Since these strategies are still under active development, well validated models are needed by equipment manufacturers as well as system planners and operators. In particular, a system operator may be unable to determine specifications and services that are required from grid forming devices without having the ability to represent them in a simulation environment with trusted models. A universal grid forming model that is portable across multiple simulation domains will be valuable in addressing this issue. In this paper, we develop a practical implementation of such a model that has the ability to represent four different grid-forming methods in a variety of simulation software packages while accurately capturing dynamics across from microsecond to millisecond timescales.


  • Model Reduction and Dynamic Aggregation of Grid-Forming Inverter Networks

    by Olaoluwapo Ajala, Nathan Baeckeland, Brian Johnson, Sairaj Dhople, Alejandro Domínguez-García

    This paper presents a model-order reduction and dynamic aggregation strategy for grid-forming inverter-based power networks. The reduced-order models preserve the network current dynamics as well as the action of the inverter current-reference limiter. Inverters based on droop, virtual synchronous machine, and dispatchable virtual oscillator control are considered, a generic model for all three control strategies is presented, and a smooth function approximation is utilized to represent the action of the current-reference limiter. The network is assumed to be composed of lines with homogeneous $l/r$ ratios. Given such a system, our approach involves three steps. First, time-domain Kron reduction is used to reduce the dimensions of the electrical network model. Next, dynamic aggregate models are developed for parallel-connected inverters. Finally, singular perturbation analysis is used to systematically eliminate fast-varying dynamics in both the network model and the grid-forming inverter single/aggregate models. Numerical simulation results benchmark the response of the reduced-order aggregate models against the full-order models from which they are derived, and we demonstrate significant savings in computation cost with limited loss of accuracy.