Manchao He
Manchao He has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Yanyan Peng
School of Civil Engineering, Shaoxing University, Shaoxing 312000, China
2 shared publications - Chun Zhu
School of Earth Sciences and Engineering, Hohai University, Nanjing 210098, China
1 shared publication - Guo Peng-Fei
School of Civil Engineering, Shaoxing University, Shaoxing 312000, China
1 shared publication - Haijiang Zhang
School of Civil Engineering, Shaoxing University, Shaoxing 312000, China
1 shared publication - Lin Qun-Chao
School of Civil Engineering, Shaoxing University, Shaoxing 312000, China
1 shared publication - Nan Song
School of Civil Engineering, Shaoxing University, Shaoxing 312000, China
1 shared publication
Latest Publications
- Open Access
Study on Crack Propagation and Coalescence in Fractured Limestone Based on 3D-DIC Technology
To deeply understand the influence of crack inclination angle on crack propagation and coalescence in fractured limestone, uniaxial compression tests were carried out on limestone specimens with prefabricated cracks. The strain field evolution diagram of the failure process of the specimens was obtained using 3D digital image correlation technology (3D-DIC technology). This, in combination with the crack propagation diagram, was used to analyze the entire failure process of the limestone specimens. The test results show that the evolution process of the principal strain field agrees well with the process of crack initiation, propagation, and coalescence. The crack development process is the process of the high strain zones consistently propagating and also the process of micro-cracks appearing, developing, and nucleating to form macro-cracks. With the increase in the parallel crack inclination angle, the stress concentration zone of the intermediate crack transfers from both ends of the crack to the middle. Meanwhile, the coalescing crack type between the parallel crack and the intermediate crack changes from a coexisting tensile crack and tensile-shear crack to a single tensile crack. With the increase in the parallel crack inclination angle, the failure of the fractured limestone specimens changes from simple splitting or tensile failure to the coexistence of tensile-shear fracture and splitting. 3D-DIC technology provides an effective method to study crack propagation and coalescence during rock failure.
Open AccessStudy on Crack Propagation and Coalescence in Fractured Limestone Based on 3D-DIC Technology
To deeply understand the influence of crack inclination angle on crack propagation and coalescence in fractured limestone, uniaxial compression tests were carried out on limestone specimens with prefabricated cracks. The strain field evolution diagram of the failure process of the specimens was obtained using 3D digital image correlation technology (3D-DIC technology). This, in combination with the crack propagation diagram, was used to analyze the entire failure process of the limestone specimens. The test results show that the evolution process of the principal strain field agrees well with the process of crack initiation, propagation, and coalescence. The crack development process is the process of the high strain zones consistently propagating and also the process of micro-cracks appearing, developing, and nucleating to form macro-cracks. With the increase in the parallel crack inclination angle, the stress concentration zone of the intermediate crack transfers from both ends of the crack to the middle. Meanwhile, the coalescing crack type between the parallel crack and the intermediate crack changes from a coexisting tensile crack and tensile-shear crack to a single tensile crack. With the increase in the parallel crack inclination angle, the failure of the fractured limestone specimens changes from simple splitting or tensile failure to the coexistence of tensile-shear fracture and splitting. 3D-DIC technology provides an effective method to study crack propagation and coalescence during rock failure.
- Open Access
Experimental Study on Infrared Temperature Characteristics and Failure Modes of Marble with Prefabricated Holes under Uniaxial Compression
In rock engineering, it is of great significance to study the failure mechanical behavior of rocks with holes. Using a combination of experiment and infrared detection, the strength, deformation, and infrared temperature evolution behavior of marble with elliptical holes under uniaxial compression were studied. The test results showed that as the vertical axis b of the ellipse increased, the peak intensity first decreased and then increased, and the minimum value appeared when the horizontal axis was equal to the vertical axis. The detection results of the infrared thermal imager showed that the maximum temperature, minimum temperature, and average temperature of the observation area in the loading stage showed a downward trend, and the range of change was between 0.02 °C and 1 °C. It was mainly due to the accumulation of energy in the loading process of the rock sample that caused the surface temperature of the specimen to decrease. In the brittle failure stage, macroscopic cracks appeared on the surface of the rock sample, which caused the energy accumulated inside to dissipate, thereby increasing the maximum temperature and average temperature of the rock sample. The average temperature increase was about 0.05 °C to about 0.19 °C. The evolution of infrared temperature was consistent with the mechanical characteristics of rock sample failure, indicating that infrared thermal imaging technology can provide effective monitoring for the study of rock mechanics. The research in this paper provides new ideas for further research on the basic characteristics of rock failure under uniaxial compression.
Open AccessExperimental Study on Infrared Temperature Characteristics and Failure Modes of Marble with Prefabricated Holes under Uniaxial Compression
In rock engineering, it is of great significance to study the failure mechanical behavior of rocks with holes. Using a combination of experiment and infrared detection, the strength, deformation, and infrared temperature evolution behavior of marble with elliptical holes under uniaxial compression were studied. The test results showed that as the vertical axis b of the ellipse increased, the peak intensity first decreased and then increased, and the minimum value appeared when the horizontal axis was equal to the vertical axis. The detection results of the infrared thermal imager showed that the maximum temperature, minimum temperature, and average temperature of the observation area in the loading stage showed a downward trend, and the range of change was between 0.02 °C and 1 °C. It was mainly due to the accumulation of energy in the loading process of the rock sample that caused the surface temperature of the specimen to decrease. In the brittle failure stage, macroscopic cracks appeared on the surface of the rock sample, which caused the energy accumulated inside to dissipate, thereby increasing the maximum temperature and average temperature of the rock sample. The average temperature increase was about 0.05 °C to about 0.19 °C. The evolution of infrared temperature was consistent with the mechanical characteristics of rock sample failure, indicating that infrared thermal imaging technology can provide effective monitoring for the study of rock mechanics. The research in this paper provides new ideas for further research on the basic characteristics of rock failure under uniaxial compression.