WTWenyan Tang

Wenyan Tang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Wenyan Tang has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Lightweight Fault Diagnosis of Industrial Circulating Water Pumps Using Multi-Level Information Fusion

    by Wenyan Tang, Yuchen Huang, Jia Wu, Kang Li, Hongwei Zhang, Yongfang Xie

    Deep learning has greatly advanced intelligent fault diagnosis (FD), yet deploying it in industrial settings remains difficult because complementary multi-sensor information must be effectively utilized under strict computational limits. This paper proposes a Lightweight Multi-Level Information Fusion Approach for Fault Diagnosis (LMIF-FD) of circulating water pumps in industrial circulating water systems. The method combines data-level fusion, MobileNetV3-small (M3S), and a multi-scale 1D-ResNet (ML1R) to capture rich temporal and frequency features. Tri-axial vibration signals are first normalized and fused in the time domain, then transformed into RGB images using continuous wavelet transform (CWT) for frequency enhancement. These signals are fed into ML1R and M3S, and their outputs are combined via feature-level fusion. LMIF-FD effectively extracts discriminative fault patterns while substantially reducing model complexity and computational load. Experimental results on real and public datasets validate its diagnostic accuracy, real-time capability, and robustness under challenging industrial conditions.

  • Open Access

    Flotation Industrial Process control based on Model-assisted deep reinforcement learning method

    by Yixuan Chen, Jia Wu, Touseef Ali, Wenyan Tang

    The flotation industrial process is the most widely used beatification method to realize the separation of mineral particles. In this article, we focus on researching the control of the flotation industrial process based on the model-assisted deep reinforcement learning method. Considering the flotation industrial process as a Markov decision process, our control method is designed based on twin delayed deep deterministic gradient algorithm, in which an auxiliary model is constructed for training to avoid the demands of a large number of training data. The experimental results show that the performance of the flotation process can be effectively guaranteed through the proposed method.


  • Open Access

    Research on the Pose Error Compensation Technology for the Mass and Centroid Measurement of Large-Sized Aircraft Based on Kinematics

    by Hang Yu, Xiaolin Zhang, Zanqin Wang, Wenyan Tang, Jun Wang

    The accurate measurement of mass and centroid is indispensable for accurate control of aircraft. In order to eliminate the influence of assembly error and product pose error on the measurement results, a multi-station measurement idea that can self-compensate for the geometric parameter error is proposed in this paper based on. At the same time, the kinematic model of the mechanical structure of the measurement equipment is established to prove the effectiveness of the structure in error compensation theoretically, and the experimental verification of the standard part and aircraft is carried out. The test results show that the measurement results using the idea of the multi-station compensation measurement are significantly better than those of the more common methods, with the mass measurement accuracy of 0.03% and the centroid error within ±0.15 mm, meeting the requirement of high precision measurement for the mass properties.


  • Open Access

    General Mass Property Measurement Equipment for Large-Sized Aircraft

    by Xiaolin Zhang, Hang Yu, Wenyan Tang, Jun Wang

    The accurate measurement of aircraft mass properties, such as the mass, centroid, and moment of inertia (MOI), plays a key role in the precise control of aircraft. In order to obtain high-precision information on the parameters of the mass, centroid, and MOI of an aircraft using a single instrument, an integrated mass property measurement system was developed in this study by analyzing and comparing the latest technologies, especially the function-switching device, which switches the measurement states between the center of mass and the MOI. The purpose of mass property measurement was achieved through single clamping. In addition, the system has strong versatility and expansion and can be used with different tooling or adapter rings to measure the mass properties of aircraft with different shapes. In this paper, the main mechanical structure of the measurement system, the measurement method of relevant mass parameters, and the solution method of the transformation matrix are introduced, and the standard parts and the aircraft were verified experimentally. The test results showed that the mass measurement accuracy was 0.03%, the centroid measurement error was within ±0.2 mm, and the measurement accuracy of the MOI was within 0.2%, all of which meet the high-precision measurement requirements for the mass properties.


  • Data-driven tracking consensus for a class of unknown nonlinear multi-agent systems

    by Jia Wu, Ning Liu, Wenyan Tang

    This study investigates the tracking consensus problem for a class of unknown nonlinear multi-agent systems A novel data-driven protocol for this problem is proposed by using the model-free adaptive control method To obtain faster convergence speed, one-step-ahead desired signal is introduced to construct the novel protocol Here, switching communication topology is considered, which is not required to be strongly connected all the time Through rigorous analysis, sufficient conditions are given to guarantee that the tracking errors of all agents are convergent under the novel protocol Examples are given to validate the effectiveness of results derived in this article


  • Consensus of nonlinear multi–agent systems with distributed event–triggered impulsive control

    by Wenyan Tang, Kun Li, Jia Wu, Yongfang Xie

    This study addresses the consensus problem in nonlinear multi-agent systems with the distributed impulsive control method. To decrease communication wastage, a distributed event-triggered impulsive protocol is developed to achieve consensus. In the proposed control method, each agent receives neighbor information and performs impulse control only when its own trigger function exceeds a given tolerance. Then, through the Lyapunov method, the conditions that allow the multi-agent systems reach consensus are analyzed and the Zeno behavior is excluded. Finally, some numerical simulations are performed to validate the effectiveness of the proposed method.


  • Open Access

    A Structure for Accurately Determining the Mass and Center of Gravity of Rigid Bodies

    by Meibao Wang, Xiaolin Zhang, Wenyan Tang, Jun Wang

    Measuring the mass and Center of Gravity (CG) of rigid bodies with a multi-point weighing method is widely used nowadays. Traditional methods usually include two parts with a certain location, i.e., a fixed platform and a mobile platform. In this paper, a novel structure is proposed to adjust the mobile platform for eliminating side forces which may load on the load cells. In addition, closed-form equations are formulated to evaluate the performance of the structure, and transformation matrices are used to estimate the characteristics of the structure. Simulation results demonstrate that repeatability of the proposed structure is higher than the traditional one and there are no side forces. Moreover, the measurement results show that the relative error of mass was within 0.05%, and the error of CG was within ±0.3 mm. The structure presented in this paper provides a foundation for practical applications.


  • Open Access

    Demodulation Technique Based on Laser Interference for Weak Photo-Acoustic Signals on Water Surface

    by Xiaolin Zhang, Hongjie Mao, Wenyan Tang

    To detect underwater sound-generating targets, a water surface acoustic wave laser interference and signal demodulation technique is proposed in this paper. The underlying principle of this technique involves casting a laser beam onto the water surface disturbed by an underwater acoustic source and creating interference between lights reflected by the surface and reference lights. A data acquisition and processing system was employed to obtain water surface acoustic wave information from the interference signals by means of demodulation, thus allowing detection of the underwater target. For the purpose of this study, an interference detection platform was set up in an optical dark chamber. High-frequency water surface fluctuations were introduced in the reference optical path as the phase generated carriers to create laser interference signals in two different paths, which received demodulation based on an improved arc tangent demodulation algorithm and characteristic ratio algorithm, respectively, in view of their different frequencies. Water surface wave information was then derived from such low-frequency and high-frequency signals. According to test results, in the frequency range of 200 Hz–10 kHz, the frequency detection accuracy was better than 1 Hz. The amplitude measurements exhibited high repeatability, with a standard deviation lower than 2.5 nm. The theory proposed in this paper is therefore experimentally verified with good results.