Heng Wei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Heng Wei has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Liang Li
Tsinghua University
6 shared publications Xiangyu Wang
School of Vehicle and Mobility, Tsinghua University, Beijing, P.R. China
5 shared publicationsJianwei Lu
School of Automotive and Transportation Engineering, Hefei University of Technology, Hefei, China
4 shared publicationsYirui Wang
School of Vehicle and Mobility, Tsinghua University, Beijing, P.R. China
4 shared publications- Yuefeng Huang
School of Vehicle and Mobility, Tsinghua University, Beijing, P.R. China
4 shared publications Hangyu Lu
School of Automotive and Transportation Engineering, Hefei University of Technology, Hefei, China
3 shared publications
Latest Publications
- 21 August 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Fault-tolerant control of off-road vehicle steering based on motor torque compensation and differential steering
Steering actuator faults can seriously degrade the path-tracking accuracy and driving safety of unmanned off-road vehicles operating in complex environments. Existing fault-tolerant steering methods often focus on a single fault mode, while the coordinated diagnosis, classification, and reconfiguration of different steering motor faults remain insufficiently addressed. To improve the steering reliability of off-road vehicles, this paper proposes a fault-tolerant control strategy based on motor torque compensation and differential steering. The proposed framework estimates the steering motor internal resistance through Kalman filtering to detect motor faults, and further identifies performance degradation and hard faults using the generalized likelihood ratio of the motor torque signal. For performance degradation faults, a sliding-mode observer reconstructs the fault value and enables motor torque compensation to recover the steering response; for hard faults, the steering function is reconfigured through differential steering, where a sliding-mode controller calculates the required differential steering moment and the wheel longitudinal forces are optimally distributed. Simulation and hardware-in-the-loop tests demonstrate that the proposed strategy effectively maintains steering response, path-tracking accuracy, and yaw stability under different steering motor fault modes.
- 21 August 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Fault-tolerant control of off-road vehicle steering based on motor torque compensation and differential steering
Steering actuator faults can seriously degrade the path-tracking accuracy and driving safety of unmanned off-road vehicles operating in complex environments. Existing fault-tolerant steering methods often focus on a single fault mode, while the coordinated diagnosis, classification, and reconfiguration of different steering motor faults remain insufficiently addressed. To improve the steering reliability of off-road vehicles, this paper proposes a fault-tolerant control strategy based on motor torque compensation and differential steering. The proposed framework estimates the steering motor internal resistance through Kalman filtering to detect motor faults, and further identifies performance degradation and hard faults using the generalized likelihood ratio of the motor torque signal. For performance degradation faults, a sliding-mode observer reconstructs the fault value and enables motor torque compensation to recover the steering response; for hard faults, the steering function is reconfigured through differential steering, where a sliding-mode controller calculates the required differential steering moment and the wheel longitudinal forces are optimally distributed. Simulation and hardware-in-the-loop tests demonstrate that the proposed strategy effectively maintains steering response, path-tracking accuracy, and yaw stability under different steering motor fault modes.
- 21 May 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Control of tracking stability for industrial vehicles under low-to-medium adhesion conditions based on LTI/LTV-MPC
Unmanned forklifts operate in highly complex environments, and their distinctive suspension systems often lead to lateral load transfer during steering maneuvers. This phenomenon markedly compromises tracking accuracy, particularly on surfaces with low-to-medium adhesion. To mitigate this issue, this study proposes a path tracking controller for unmanned forklifts, leveraging the estimation of transient tire cornering stiffness. The controller comprises three integral modules: a transient cornering stiffness estimation module, a cornering stiffness state prediction module, and a path tracking control module. The transient tire cornering stiffness is estimated through an adaptive forgetting factor least squares method. Utilizing the estimated transient cornering stiffness values, the system identifies stable and unstable operating regions of the tire, facilitating an assessment of the current tire slip stability. By linearizing the tire model, the cornering stiffness state is predicted, generating desired tire forces that are subsequently fed into the path tracking controller. The controller dynamically adapts its configuration based on the tire’s operating region, thereby reducing the computational burden of the control solution. Upon receiving the desired tire forces, the controller modulates the unmanned forklift’s drive, braking, and steering systems to ensure the tires operate within a stable regime. Comprehensive simulations conducted using MATLAB/Simulink and PreScan, complemented by hardware-in-the-loop (HIL) testing, validate that the proposed path tracking control strategy reduces the peak lateral tracking error by approximately 25.4% compared to the NMPC benchmark on low-to-medium adhesion surfaces, thereby effectively enhancing lateral stability while ensuring real-time computational feasibility.
- 21 May 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Control of tracking stability for industrial vehicles under low-to-medium adhesion conditions based on LTI/LTV-MPC
Unmanned forklifts operate in highly complex environments, and their distinctive suspension systems often lead to lateral load transfer during steering maneuvers. This phenomenon markedly compromises tracking accuracy, particularly on surfaces with low-to-medium adhesion. To mitigate this issue, this study proposes a path tracking controller for unmanned forklifts, leveraging the estimation of transient tire cornering stiffness. The controller comprises three integral modules: a transient cornering stiffness estimation module, a cornering stiffness state prediction module, and a path tracking control module. The transient tire cornering stiffness is estimated through an adaptive forgetting factor least squares method. Utilizing the estimated transient cornering stiffness values, the system identifies stable and unstable operating regions of the tire, facilitating an assessment of the current tire slip stability. By linearizing the tire model, the cornering stiffness state is predicted, generating desired tire forces that are subsequently fed into the path tracking controller. The controller dynamically adapts its configuration based on the tire’s operating region, thereby reducing the computational burden of the control solution. Upon receiving the desired tire forces, the controller modulates the unmanned forklift’s drive, braking, and steering systems to ensure the tires operate within a stable regime. Comprehensive simulations conducted using MATLAB/Simulink and PreScan, complemented by hardware-in-the-loop (HIL) testing, validate that the proposed path tracking control strategy reduces the peak lateral tracking error by approximately 25.4% compared to the NMPC benchmark on low-to-medium adhesion surfaces, thereby effectively enhancing lateral stability while ensuring real-time computational feasibility.
- 13 May 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Research on easy turn control of single-motor rear-wheel drive electric vehicles
The Easy Turn (EZT) function is a dedicated feature for electric vehicles designed to enhance maneuverability in low-speed, large-steering-angle scenarios. The minimum turning radius of a vehicle is reduced by applying braking torque to the inner wheels and increasing drive motor torque. This paper conducts principle analysis, control strategy development, and simulation verification of EZT for single-motor rear-wheel-drive EVs. Two control strategies are proposed. Results indicate that the first strategy effectively reduces the minimum turning radius (by 0.20 m at 8 MPa, exhibiting an approximate linearity with braking pressure) without compromising the vehicle’s original acceleration or deceleration performance. Conversely, the second strategy yields a marginal increase in the turning radius when the front wheel angle exceeds the critical threshold defined in this study.
- 13 May 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Research on easy turn control of single-motor rear-wheel drive electric vehicles
The Easy Turn (EZT) function is a dedicated feature for electric vehicles designed to enhance maneuverability in low-speed, large-steering-angle scenarios. The minimum turning radius of a vehicle is reduced by applying braking torque to the inner wheels and increasing drive motor torque. This paper conducts principle analysis, control strategy development, and simulation verification of EZT for single-motor rear-wheel-drive EVs. Two control strategies are proposed. Results indicate that the first strategy effectively reduces the minimum turning radius (by 0.20 m at 8 MPa, exhibiting an approximate linearity with braking pressure) without compromising the vehicle’s original acceleration or deceleration performance. Conversely, the second strategy yields a marginal increase in the turning radius when the front wheel angle exceeds the critical threshold defined in this study.
- 30 March 2026
- Published by ASME International in Journal of Computational and Nonlinear Dynamics
- Vol. 21 (5)
Stochastic Bifurcation and Behavior Analysis of 4WID Vehicle Disk Brake With Driving Torque Control
The driving force of each wheel in a four-wheel independent drive (4WID) vehicle can be independently controlled, which provides a new approach for controlling the brake chatter. The dynamic model of the brake chatter exhibits significant uncertainty due to model simplification and parameter errors, which makes it difficult to select control parameters. Hence, a stochastic dynamic model of 4WID vehicle disk brake with stiffness uncertainty of brake pad is proposed, and the control algorithm of the driving torque is designed by using the proportional–derivative control method. Then, the stochastic averaging method is used to solve the averaged Itô differential equation, and the stochastic stability of the brake system for different control parameters is discussed by means of the boundary type of the one-dimensional energy process. Furthermore, the Fokker–Planck–Kolmogorov (FPK) equation is derived, and the dynamic bifurcation boundary and phenomenological bifurcation boundary of control parameters are analytically obtained by using the bifurcation coefficient. Meanwhile, the influences of the noise intensity, equivalent lateral damping, and brake pressure of the brake pad on the bifurcation boundary are discussed. The results indicate that the increase of the equivalent lateral damping and the decrease of the noise intensity and brake pressure are effective measures to expand the stability region of control parameters. Finally, the energy probability density and joint probability density are numerically simulated to verify the analytical analysis of the stochastic stability and bifurcation characteristics, which provides technical support for optimizing control parameters of the brake chatter.
- 30 March 2026
- Published by ASME International in Journal of Computational and Nonlinear Dynamics
- Vol. 21 (5)
Stochastic Bifurcation and Behavior Analysis of 4WID Vehicle Disk Brake With Driving Torque Control
The driving force of each wheel in a four-wheel independent drive (4WID) vehicle can be independently controlled, which provides a new approach for controlling the brake chatter. The dynamic model of the brake chatter exhibits significant uncertainty due to model simplification and parameter errors, which makes it difficult to select control parameters. Hence, a stochastic dynamic model of 4WID vehicle disk brake with stiffness uncertainty of brake pad is proposed, and the control algorithm of the driving torque is designed by using the proportional–derivative control method. Then, the stochastic averaging method is used to solve the averaged Itô differential equation, and the stochastic stability of the brake system for different control parameters is discussed by means of the boundary type of the one-dimensional energy process. Furthermore, the Fokker–Planck–Kolmogorov (FPK) equation is derived, and the dynamic bifurcation boundary and phenomenological bifurcation boundary of control parameters are analytically obtained by using the bifurcation coefficient. Meanwhile, the influences of the noise intensity, equivalent lateral damping, and brake pressure of the brake pad on the bifurcation boundary are discussed. The results indicate that the increase of the equivalent lateral damping and the decrease of the noise intensity and brake pressure are effective measures to expand the stability region of control parameters. Finally, the energy probability density and joint probability density are numerically simulated to verify the analytical analysis of the stochastic stability and bifurcation characteristics, which provides technical support for optimizing control parameters of the brake chatter.
- 9 January 2026
- Published by SAGE Publications in Journal of Vibration and Control
Dynamic response and stability analysis of brake chatter with stochastic parameter perturbation
The parameter perturbation makes it difficult to analyze the dynamic mechanism of the brake chatter with the help of an ideal deterministic model. Hence, a stochastic dynamic model of brake chatter with the uncertainty of the torsional stiffness of the brake disc is established, the Stribeck model is used to describe the friction characteristic between the brake pad and brake disc. Then, the Itô stochastic differential equation is solved by means of the stochastic averaging method, the boundary type of the one-dimensional energy process is identified to discuss the stochastic stability of the brake system. Furthermore, the Fokker Planck Kolmogorov equation is derived, the dynamic bifurcation and phenomenological bifurcation are analytically proven, the influences of parameters, such as noise intensity, brake pressure, and friction coefficient, on bifurcation characteristics are revealed. The results show that the noise intensity, brake pressure, and friction coefficient difference need to be reduced to improve the system stability. Finally, the probability density function of the brake system is used to validate the analytical analysis. The relevant results provide a theoretical basis for better suppressing the brake chatter.
- 9 January 2026
- Published by SAGE Publications in Journal of Vibration and Control
Dynamic response and stability analysis of brake chatter with stochastic parameter perturbation
The parameter perturbation makes it difficult to analyze the dynamic mechanism of the brake chatter with the help of an ideal deterministic model. Hence, a stochastic dynamic model of brake chatter with the uncertainty of the torsional stiffness of the brake disc is established, the Stribeck model is used to describe the friction characteristic between the brake pad and brake disc. Then, the Itô stochastic differential equation is solved by means of the stochastic averaging method, the boundary type of the one-dimensional energy process is identified to discuss the stochastic stability of the brake system. Furthermore, the Fokker Planck Kolmogorov equation is derived, the dynamic bifurcation and phenomenological bifurcation are analytically proven, the influences of parameters, such as noise intensity, brake pressure, and friction coefficient, on bifurcation characteristics are revealed. The results show that the noise intensity, brake pressure, and friction coefficient difference need to be reduced to improve the system stability. Finally, the probability density function of the brake system is used to validate the analytical analysis. The relevant results provide a theoretical basis for better suppressing the brake chatter.
- 30 December 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 240 (12) , 7905-7919
Coordinated control framework for lateral and roll stability in distributed-drive electric vehicles through torque vectoring and continuous damping control
This article presents a coordinated control framework to enhance the lateral and roll stability of distributed-drive electric vehicles with electric driving, hydraulic braking, and continuous damping control systems. The control process begins with the upper-layer coordinated controller using the model predictive control algorithm to track nominal reference values, and compute the desired additional yaw moment and anti-roll moment for stability control. The required longitudinal forces are distributed by optimisation based on the total driving torque and yaw moment requirements. In the sequence, the tyre slip regulator calculates the optimal slip ratio from these forces and employs sliding mode control to achieve the desired output torque. For the electro-hydraulic braking torque distribution, a frequency-splitting strategy is utilised to optimise the overall braking performance. The suspension damping forces are also optimised based on load distribution and the physical constraints, improving roll stability. Simulation tests validate the framework’s effectiveness in enhancing lateral and roll stability, demonstrating robust dynamics control in varied driving scenarios.
- 30 December 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 240 (12) , 7905-7919
Coordinated control framework for lateral and roll stability in distributed-drive electric vehicles through torque vectoring and continuous damping control
This article presents a coordinated control framework to enhance the lateral and roll stability of distributed-drive electric vehicles with electric driving, hydraulic braking, and continuous damping control systems. The control process begins with the upper-layer coordinated controller using the model predictive control algorithm to track nominal reference values, and compute the desired additional yaw moment and anti-roll moment for stability control. The required longitudinal forces are distributed by optimisation based on the total driving torque and yaw moment requirements. In the sequence, the tyre slip regulator calculates the optimal slip ratio from these forces and employs sliding mode control to achieve the desired output torque. For the electro-hydraulic braking torque distribution, a frequency-splitting strategy is utilised to optimise the overall braking performance. The suspension damping forces are also optimised based on load distribution and the physical constraints, improving roll stability. Simulation tests validate the framework’s effectiveness in enhancing lateral and roll stability, demonstrating robust dynamics control in varied driving scenarios.
- Open Access
Vibration Control of Wheels in Distributed Drive Electric Vehicle Based on Electro-Mechanical Braking
Electro-Mechanical Braking (EMB), as a novel brake-by-wire technology, is rapidly being implemented in vehicle chassis systems. Nevertheless, the integrated design of the EMB caliper contributes to an increased unsprung mass in Distributed Drive Electric Vehicles (DDEVs). Experimental results indicate that when the Anti-lock Braking System (ABS) is activated, these factors can induce high-frequency wheel oscillations. To address this issue, this study proposes an anti-oscillation control strategy tailored for EMB systems. Firstly, a quarter-vehicle model is established that incorporates the dynamics of the drive motor, suspension, and tire, enabling analysis of the system’s resonant behavior. The Discrete Fourier Transform (DFT) is applied to the difference between wheel speed and vehicle speed to extract the dominant frequency components. Then, an Adaptive Braking Intensity Field Regulation (ABIFR) strategy and a Model Predictive and Logic Control (MP-LC) framework are developed. These methods modulate the amplitude and frequency of braking torque reductions executed by the ABS to suppress high-frequency wheel oscillations, while ensuring sufficient braking force. Experimental validation using a real vehicle demonstrates that the proposed method increases the Mean Fully Developed Deceleration (MFDD) by 14.8% on low-adhesion surfaces and 15.2% on high-adhesion surfaces. Furthermore, the strategy significantly suppresses 12–13 Hz high-frequency oscillations, restoring normal ABS control cycles and enhancing both braking performance and ride comfort.
Open AccessVibration Control of Wheels in Distributed Drive Electric Vehicle Based on Electro-Mechanical Braking
Electro-Mechanical Braking (EMB), as a novel brake-by-wire technology, is rapidly being implemented in vehicle chassis systems. Nevertheless, the integrated design of the EMB caliper contributes to an increased unsprung mass in Distributed Drive Electric Vehicles (DDEVs). Experimental results indicate that when the Anti-lock Braking System (ABS) is activated, these factors can induce high-frequency wheel oscillations. To address this issue, this study proposes an anti-oscillation control strategy tailored for EMB systems. Firstly, a quarter-vehicle model is established that incorporates the dynamics of the drive motor, suspension, and tire, enabling analysis of the system’s resonant behavior. The Discrete Fourier Transform (DFT) is applied to the difference between wheel speed and vehicle speed to extract the dominant frequency components. Then, an Adaptive Braking Intensity Field Regulation (ABIFR) strategy and a Model Predictive and Logic Control (MP-LC) framework are developed. These methods modulate the amplitude and frequency of braking torque reductions executed by the ABS to suppress high-frequency wheel oscillations, while ensuring sufficient braking force. Experimental validation using a real vehicle demonstrates that the proposed method increases the Mean Fully Developed Deceleration (MFDD) by 14.8% on low-adhesion surfaces and 15.2% on high-adhesion surfaces. Furthermore, the strategy significantly suppresses 12–13 Hz high-frequency oscillations, restoring normal ABS control cycles and enhancing both braking performance and ride comfort.
- 15 May 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 240 (5) , 2724-2735
Adaptive AFS and ESC coordinated control for intelligent vehicles based on robust NFTSMC considering tire nonlinearity
The escalating demands for software-defined vehicles have prompted advancements in automated driving, facilitating a shift toward a novel chassis domain electronics architecture equipped with control-by-wire actuators. How to bolster driving dynamics and stability performance via chassis domain control represents a significant and challenging endeavor. This article presents a novel dual-layer adaptive active front steering and electronic stability control (AFS-ESC) coordinated control architecture based on the robust nonsingular fast terminal sliding mode control (NFTSMC) method, aimed at stabilizing the vehicle and enhancing the maneuverability. Initially, the robust NFTSMC theory is rigorously derived and analyzed for uncertain nonlinear multiple input multiple output systems. It is then applied to develop yaw rate-based maneuverability and side-slip angle-based stability decision-making using vehicle and tire models with unknown nonlinearities, uncertainties, and disturbances. Additionally, an adaptive gain based on a stability index is introduced to coordinate the decision-making outcomes. Subsequently, the requisite total yaw-moment is allocated to the front wheel steering angle and wheel cylinder pressures through AFS and ESC, respectively, based on an adaptive semiempirical tire nonlinearity index. The efficacy of the proposed architecture is validated via 0.7 Hz sine with dwell tests with high, medium, and low tire-road adhesion on the hardware-in-the-loop platform, demonstrating its superior performance in stabilizing the vehicle and enhancing maneuverability compared to the robust control-based and NFTSMC-based AFS-ESC coordination, ESC, AFS, and uncontrolled cases.
- 15 May 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 240 (5) , 2724-2735
Adaptive AFS and ESC coordinated control for intelligent vehicles based on robust NFTSMC considering tire nonlinearity
The escalating demands for software-defined vehicles have prompted advancements in automated driving, facilitating a shift toward a novel chassis domain electronics architecture equipped with control-by-wire actuators. How to bolster driving dynamics and stability performance via chassis domain control represents a significant and challenging endeavor. This article presents a novel dual-layer adaptive active front steering and electronic stability control (AFS-ESC) coordinated control architecture based on the robust nonsingular fast terminal sliding mode control (NFTSMC) method, aimed at stabilizing the vehicle and enhancing the maneuverability. Initially, the robust NFTSMC theory is rigorously derived and analyzed for uncertain nonlinear multiple input multiple output systems. It is then applied to develop yaw rate-based maneuverability and side-slip angle-based stability decision-making using vehicle and tire models with unknown nonlinearities, uncertainties, and disturbances. Additionally, an adaptive gain based on a stability index is introduced to coordinate the decision-making outcomes. Subsequently, the requisite total yaw-moment is allocated to the front wheel steering angle and wheel cylinder pressures through AFS and ESC, respectively, based on an adaptive semiempirical tire nonlinearity index. The efficacy of the proposed architecture is validated via 0.7 Hz sine with dwell tests with high, medium, and low tire-road adhesion on the hardware-in-the-loop platform, demonstrating its superior performance in stabilizing the vehicle and enhancing maneuverability compared to the robust control-based and NFTSMC-based AFS-ESC coordination, ESC, AFS, and uncontrolled cases.