Guangqiang Xie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Guangqiang Xie has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Ping Zhang
College of Agriculture, Shihezi University, Shihezi 832003, China
5 shared publications - Lihai Wang
Heilongjiang Provincial Key Laboratory of Forest Sustainable Management and Environmental Microbial Engineering, Northeast Forestry University, Harbin 150040, China
3 shared publications - Hao Zhong
College of Mechanical and Electrical Engineering, Northeast Forestry University, Harbin 150040, China
2 shared publications - Haoran Liu
College of Mechanical and Electrical Engineering, Northeast Forestry University, Harbin 150040, China
2 shared publications - Yanqiu Xing
Northeast Forestry University (Harbin, China)
2 shared publications - Jian Diao
College of Wildlife and Protected Area, Northeast Forestry University, Harbin 150040, China
1 shared publication
Latest Publications
- Open Access
Research on Tree Point Cloud Enhancement Based on Deep Learning
The acquisition of high-quality tree point cloud datasets facilitates research in various forestry fields, including tree species classification, diversity monitoring, and biomass estimation. However, due to limitations in sensor performance and occlusion between trees, tree point clouds acquired using LiDAR scanners often exhibit missing data. This not only degrades the quality of the point clouds, but also significantly reduces the number of usable samples. Therefore, this study proposed a tree point cloud enhancement system, which included the completion network and the sample augmentation network. The point cloud completion network utilized a transformer-based improved module to predict missing point clouds and combined up-sampling processing to progressively complete the point clouds from coarse to fine. This could improve the subsequent model decisions and performance through data balancing. On the other hand, the sample augmentation network, based on an adversarial learning strategy, separately constructed the generator and the classifier. By applying shape transformations, point displacements, and point drop to complete point cloud samples, the learnable parameters in the generator and the classifier were alternately optimized. This process enhanced both the quality and the quantity of the tree point cloud dataset. In addition, this study introduced a multi-head attention pooling layer, which further enhanced the joint network’s ability to learn and extract tree structural features. The experimental results showed that the completion network successfully restored missing tree point clouds of various types, achieving an average Chamfer Distance of 4.84 and an average F-score of 0.90. The experiments also demonstrated the effectiveness and robustness of the sample augmentation network, which improved classification accuracy by approximately 2.9% compared to the original dataset.
Open AccessResearch on Tree Point Cloud Enhancement Based on Deep Learning
The acquisition of high-quality tree point cloud datasets facilitates research in various forestry fields, including tree species classification, diversity monitoring, and biomass estimation. However, due to limitations in sensor performance and occlusion between trees, tree point clouds acquired using LiDAR scanners often exhibit missing data. This not only degrades the quality of the point clouds, but also significantly reduces the number of usable samples. Therefore, this study proposed a tree point cloud enhancement system, which included the completion network and the sample augmentation network. The point cloud completion network utilized a transformer-based improved module to predict missing point clouds and combined up-sampling processing to progressively complete the point clouds from coarse to fine. This could improve the subsequent model decisions and performance through data balancing. On the other hand, the sample augmentation network, based on an adversarial learning strategy, separately constructed the generator and the classifier. By applying shape transformations, point displacements, and point drop to complete point cloud samples, the learnable parameters in the generator and the classifier were alternately optimized. This process enhanced both the quality and the quantity of the tree point cloud dataset. In addition, this study introduced a multi-head attention pooling layer, which further enhanced the joint network’s ability to learn and extract tree structural features. The experimental results showed that the completion network successfully restored missing tree point clouds of various types, achieving an average Chamfer Distance of 4.84 and an average F-score of 0.90. The experiments also demonstrated the effectiveness and robustness of the sample augmentation network, which improved classification accuracy by approximately 2.9% compared to the original dataset.
- Open Access
Tree Species Classification Based on Point Cloud Completion
LiDAR is an active remote sensing technology widely used in forestry applications, such as forest resource surveys, tree information collection, and ecosystem monitoring. However, due to the resolution limitations of 3D-laser scanners and the canopy occlusion in forest environments, the tree point clouds obtained often have missing data. This can reduce the accuracy of individual tree segmentation, which subsequently affects the tree species classification. To address the issue, this study used point cloud data with RGB information collected by the UAV platform to improve tree species classification by completing the missing point clouds. Furthermore, the study also explored the effects of point cloud completion, feature selection, and classification methods on the results. Specifically, both a traditional geometric method and a deep learning-based method were used for point cloud completion, and their performance was compared. For the classification of tree species, five machine learning algorithms—Random Forest (RF), Support Vector Machine (SVM), Back Propagation Neural Network (BPNN), Quadratic Discriminant Analysis (QDA), and K-Nearest Neighbors (KNN)—were utilized. This study also ranked the importance of features to assess the impact of different algorithms and features on classification accuracy. The results showed that the deep learning-based completion method provided the best performance (avgCD = 6.14; avgF1 = 0.85), generating more complete point clouds than the traditional method. On the other hand, compared with SVM and BPNN, RF showed better performance in dealing with multi-classification tasks with limited training samples (OA-87.41%, Kappa-0.85). Among the six dominant tree species, Pinus koraiensis had the highest classification accuracy (93.75%), while that of Juglans mandshurica was the lowest (82.05%). In addition, the vegetation index and the tree structure parameter accounted for 50% and 30%, respectively, in the top 10 features in terms of feature importance. The point cloud intensity also had a high contribution to the classification results, indicating that the lidar point cloud data can also be used as an important basis for tree species classification.
Open AccessTree Species Classification Based on Point Cloud Completion
LiDAR is an active remote sensing technology widely used in forestry applications, such as forest resource surveys, tree information collection, and ecosystem monitoring. However, due to the resolution limitations of 3D-laser scanners and the canopy occlusion in forest environments, the tree point clouds obtained often have missing data. This can reduce the accuracy of individual tree segmentation, which subsequently affects the tree species classification. To address the issue, this study used point cloud data with RGB information collected by the UAV platform to improve tree species classification by completing the missing point clouds. Furthermore, the study also explored the effects of point cloud completion, feature selection, and classification methods on the results. Specifically, both a traditional geometric method and a deep learning-based method were used for point cloud completion, and their performance was compared. For the classification of tree species, five machine learning algorithms—Random Forest (RF), Support Vector Machine (SVM), Back Propagation Neural Network (BPNN), Quadratic Discriminant Analysis (QDA), and K-Nearest Neighbors (KNN)—were utilized. This study also ranked the importance of features to assess the impact of different algorithms and features on classification accuracy. The results showed that the deep learning-based completion method provided the best performance (avgCD = 6.14; avgF1 = 0.85), generating more complete point clouds than the traditional method. On the other hand, compared with SVM and BPNN, RF showed better performance in dealing with multi-classification tasks with limited training samples (OA-87.41%, Kappa-0.85). Among the six dominant tree species, Pinus koraiensis had the highest classification accuracy (93.75%), while that of Juglans mandshurica was the lowest (82.05%). In addition, the vegetation index and the tree structure parameter accounted for 50% and 30%, respectively, in the top 10 features in terms of feature importance. The point cloud intensity also had a high contribution to the classification results, indicating that the lidar point cloud data can also be used as an important basis for tree species classification.
- Open Access
A Mechanistic Prediction Model of Resistance to Uprooting of Coniferous Trees in Heilongjiang Province, China
Coarse roots and the root plate play an important role in tree resistance to uprooting. In this study, a qualitative mechanistic model was developed to analyze coniferous tree resistance to uprooting in relation to tree morphological characteristics. The sizes of the crown, stem, and root plate of twenty sample spruces and twenty sample Korean pines were individually measured for this purpose. Using Ground Penetrating Radar (GPR), the coarse root distribution and root plate size were detected. In the qualitative mechanistic model, a larger crown area increased the overturning moment, while higher DBH and root plate mass increased the resistance moment. The resistance coefficient (Rm) was calculated by comparing resistive and overturning moments, classifying samples into three uprooting hazard levels. Trees with smaller crown areas, larger stems, and root plates tend to have higher resistance to uprooting, as indicated by higher Rm values. This qualitative mechanistic model provides a useful tool for assessing coniferous standing tree uprooting resistance.
Open AccessA Mechanistic Prediction Model of Resistance to Uprooting of Coniferous Trees in Heilongjiang Province, China
Coarse roots and the root plate play an important role in tree resistance to uprooting. In this study, a qualitative mechanistic model was developed to analyze coniferous tree resistance to uprooting in relation to tree morphological characteristics. The sizes of the crown, stem, and root plate of twenty sample spruces and twenty sample Korean pines were individually measured for this purpose. Using Ground Penetrating Radar (GPR), the coarse root distribution and root plate size were detected. In the qualitative mechanistic model, a larger crown area increased the overturning moment, while higher DBH and root plate mass increased the resistance moment. The resistance coefficient (Rm) was calculated by comparing resistive and overturning moments, classifying samples into three uprooting hazard levels. Trees with smaller crown areas, larger stems, and root plates tend to have higher resistance to uprooting, as indicated by higher Rm values. This qualitative mechanistic model provides a useful tool for assessing coniferous standing tree uprooting resistance.
- Open Access
- 14 December 2022
- Published by MDPI AG in Microorganisms
- Vol. 10 (12) , 2472
Bacillus velezensis BY6 Promotes Growth of Poplar and Improves Resistance Contributing to the Biocontrol of Armillaria solidipes
To improve the application of endophyte Bacillus velezensis BY6 from the xylem of poplar, the effect of BY6 on the growth of diseased Populus davidiana × Populus. alba var. pyramidalis Louche (Pdpap poplar) seedlings and the biological control effect on the pathogen Armillaria solidipes were tested using a plant split-root experiment. After applying BY6 to the roots of diseased Pdpap poplar seedlings, the results show that plant growth indicators (dry mass, fresh mass, and plant height) were significantly increased (p < 0.05), and genes related to auxin hormone signal transcription were activated. BY6 indicated a surprising control effect after the inoculation of diseased Pdpap poplar seedlings. Compared to the infected control group, the treated disease index of the diseased Pdpap poplar seedlings in the treatment group were reduced by 49.53% on the 20th day. The relative staining areas of diaminobenzidine (DAB) and Trypan blue decreased by 3.37 and 7.31 times, respectively. The physiological indicators (soluble sugar and protein) and oxidase indicators were significantly increased (p < 0.05). The expression levels of defense genes related to salicylic acid (SA) and jasmonic acid (JA) signaling pathways were significantly increased (p < 0.05). Amazingly, the results indicate that BY6 simultaneously activates induced systemic resistance (ISR) and systemic acquired resistance (SAR) in diseased Pdpap poplar seedlings and promotes growth. The results indicate that BY6 is a promising candidate for developing forest tree biofertilizers and biopesticides.
- 14 December 2022
- Published by MDPI AG in Microorganisms
- Vol. 10 (12) , 2472
Open AccessBacillus velezensis BY6 Promotes Growth of Poplar and Improves Resistance Contributing to the Biocontrol of Armillaria solidipes
To improve the application of endophyte Bacillus velezensis BY6 from the xylem of poplar, the effect of BY6 on the growth of diseased Populus davidiana × Populus. alba var. pyramidalis Louche (Pdpap poplar) seedlings and the biological control effect on the pathogen Armillaria solidipes were tested using a plant split-root experiment. After applying BY6 to the roots of diseased Pdpap poplar seedlings, the results show that plant growth indicators (dry mass, fresh mass, and plant height) were significantly increased (p < 0.05), and genes related to auxin hormone signal transcription were activated. BY6 indicated a surprising control effect after the inoculation of diseased Pdpap poplar seedlings. Compared to the infected control group, the treated disease index of the diseased Pdpap poplar seedlings in the treatment group were reduced by 49.53% on the 20th day. The relative staining areas of diaminobenzidine (DAB) and Trypan blue decreased by 3.37 and 7.31 times, respectively. The physiological indicators (soluble sugar and protein) and oxidase indicators were significantly increased (p < 0.05). The expression levels of defense genes related to salicylic acid (SA) and jasmonic acid (JA) signaling pathways were significantly increased (p < 0.05). Amazingly, the results indicate that BY6 simultaneously activates induced systemic resistance (ISR) and systemic acquired resistance (SAR) in diseased Pdpap poplar seedlings and promotes growth. The results indicate that BY6 is a promising candidate for developing forest tree biofertilizers and biopesticides.
- Open Access
X-ray Computed Tomography (CT) Scanning Is a Non-Destructive and Modern Technique to Identify and Assess the Characteristics of Armillaria solidipes Pathogen Infections in Poplar Roots
(1) Objective: The opacity of soils complicates studies of root infection. An example of this is the infection of Armillaria solidipes on poplar (Populus davidiana × Populus alba var. pyramidalis Louche) roots systems, which risks damaging trees. (2) Methods: Only one of the four tested substrates for tree species was shown to be suitable to perform X-ray computed tomography (CT). Three-dimensional (3D) imaging was used to reconstruct the root system of poplar seedlings and the changes caused by the infection. (3) Results: We developed a protocol to efficiently grow poplar on a synthetic matrix, vermiculite, that allows for monitoring the root system by X-ray CT. Poplar 3D reconstruction of the root system was automated using the software Win-RHIZO, and various infection parameters were identified. (4) Conclusions: Our procedure allows for monitoring the infection of root systems and provides new opportunities to characterize the complex Armillaria solidipes poplar interaction using X-ray CT.
Open AccessX-ray Computed Tomography (CT) Scanning Is a Non-Destructive and Modern Technique to Identify and Assess the Characteristics of Armillaria solidipes Pathogen Infections in Poplar Roots
(1) Objective: The opacity of soils complicates studies of root infection. An example of this is the infection of Armillaria solidipes on poplar (Populus davidiana × Populus alba var. pyramidalis Louche) roots systems, which risks damaging trees. (2) Methods: Only one of the four tested substrates for tree species was shown to be suitable to perform X-ray computed tomography (CT). Three-dimensional (3D) imaging was used to reconstruct the root system of poplar seedlings and the changes caused by the infection. (3) Results: We developed a protocol to efficiently grow poplar on a synthetic matrix, vermiculite, that allows for monitoring the root system by X-ray CT. Poplar 3D reconstruction of the root system was automated using the software Win-RHIZO, and various infection parameters were identified. (4) Conclusions: Our procedure allows for monitoring the infection of root systems and provides new opportunities to characterize the complex Armillaria solidipes poplar interaction using X-ray CT.
- Open Access
- 31 January 2021
- Published by Wiley in BioMed Research International
- Vol. 2021 (1)
A Complete Genome Sequence of the Wood Stem Endophyte Bacillus velezensis BY6 Strain Possessing Plant Growth‐Promoting and Antifungal Activities
An endophytic bacterium Bacillus velezensis BY6 was isolated from the wood stems of healthy Populus davidiana × P. alba var. pyramidalis (PdPap). The BY6 strain can inhibit pathogenic fungus Alternaria alternate in PdPap and promote growth of PdPap seedlings. In the present study, we used the Pacific Biosciences long‐read sequencing platform, a single‐molecule real‐time (SMRT) technology for strain BY6, to perform complete genome sequencing. The genome size was 3,898,273 bp, the number of genes was 4,045, and the average GC content was 47.33%. A complete genome of strain BY6 contained 110 secondary metabolite gene clusters. Nine of the secondary metabolite gene clusters exhibited antifungal activity and promoted growth functions primarily involved in the synthesis of surfactin, bacteriocins, accumulated iron ions, and related antibiotics. Gene clusters provide genetic resources for biotechnology and genetic engineering, and enhance understanding of the relationship between microorganisms and plants.
- 31 January 2021
- Published by Wiley in BioMed Research International
- Vol. 2021 (1)
Open AccessA Complete Genome Sequence of the Wood Stem Endophyte Bacillus velezensis BY6 Strain Possessing Plant Growth‐Promoting and Antifungal Activities
An endophytic bacterium Bacillus velezensis BY6 was isolated from the wood stems of healthy Populus davidiana × P. alba var. pyramidalis (PdPap). The BY6 strain can inhibit pathogenic fungus Alternaria alternate in PdPap and promote growth of PdPap seedlings. In the present study, we used the Pacific Biosciences long‐read sequencing platform, a single‐molecule real‐time (SMRT) technology for strain BY6, to perform complete genome sequencing. The genome size was 3,898,273 bp, the number of genes was 4,045, and the average GC content was 47.33%. A complete genome of strain BY6 contained 110 secondary metabolite gene clusters. Nine of the secondary metabolite gene clusters exhibited antifungal activity and promoted growth functions primarily involved in the synthesis of surfactin, bacteriocins, accumulated iron ions, and related antibiotics. Gene clusters provide genetic resources for biotechnology and genetic engineering, and enhance understanding of the relationship between microorganisms and plants.