LTLeonid Tuboltsev

Leonid Tuboltsev

*This is an algorithmically generated author record based on publicly available information.

Leonid Tuboltsev has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    PROSPECTS FOR THE DEVELOPMENT OF THE RAW MATERIAL BASE OF THE UKRAINIAN ALUMINUM INDUSTRY

    by Physical and Technological Institute of Metals and Alloys of the National Academy of Sciences of Ukraine, Адель Пригунова, Leonid Tuboltsev, Institute of Ferrous Metallurgy named after Z. I. Nekrasov of the National Academy of Sciences of Ukraine, Леонід Тубольцев

    Introduction. The challenges faced by Ukraine during the military operations of the russian federation (rf) increased the need to strengthen the economy, the military-defense complex, and the country's national security. A decisive role in this process should be played by the aluminum industry, the development of which largely depends on the state and prospects for the development of the raw material base. Materials and methods. The methodological basis of the study is a systematic analysis of the state and problems of the development of the raw material base of the domestic and global aluminum industry, generalization of information, statistical methods of data collection, data processing and forecasting. Results and discussion. The situation in the aluminum industry from the moment Ukraine gained independence to the present time is considered. The state and prospects of the domestic raw material base for aluminum production were studied. The reasons and consequences of reduction and stoppage of production capacities are discussed. It was determined that due to the negative consequences of privatization, in 2011, Ukraine lost its status as a producer of primary aluminum, without receiving the compensation and expected investments for the creation of new promising productions. Based on world and domestic experience, ways of innovative development of the raw material base of domestic aluminum production using the existing scientific and technical, production and resource potential are proposed. The necessity of determining the strategic directions of the revival and modernization of the aluminum industry in Ukraine in the post-war period and for the future as part of the development of the "State Program for the Development of the Aluminum Industry of Ukraine until 2050" is shown. Conclusions. In order to ensure the national security of the state and reduce Ukraine's dependence on the world metal market, the primary, medium and long-term tasks in the aluminum industry should be the restoration of enterprises destroyed by the war and the selection of promising directions for its growth based on modern achievements of science and technology. An urgent task is the revival of the closed cycle of aluminum production in Ukraine, the expansion of the raw material base by improving equipment, the development of technologies for the processing and enrichment of domestic bauxite, the study of the possibility of using aluminum ore raw materials with a low content of useful components and a high content of iron. The creation of world-class Ukrainian aluminum production requires the development of a Concept and the corresponding State program for the development of the aluminum industry for the period until 2050, which provides for the development of the raw material base and the provision of the economy's needs for competitive aluminum products, the organization of state regulation regarding the optimal use of raw materials and energy resources. Вступ. Виклики, що постали перед Україною в період військових дій російської федерації (рф), посилили необхідність зміцнення економіки, військово-оборонного комплексу та національної безпеки країни. Вирішальну роль в цьому процесі має відігравати алюмінієва промисловість, розвиток якої значною мірою залежить від стану та перспектив розвитку сировинної бази. Матеріали та методи. Методологічною основою дослідження є системний аналіз стану і проблеми розвитку сировинної бази вітчизняної та світової алюмінієвої індустрії, узагальнення інформації, статистичні методи збору, обробки даних та прогнозу. Результати і обговорення. Розглянуто ситуацію в алюмінієвій галузі з моменту здобуття Україною незалежності до теперішнього часу. Досліджено стан та перспективи вітчизняної сировинної бази з виробництва алюмінію. Обговорено причини і наслідки скорочення та зупинення виробничих потужностей. Визначено, що через негативні наслідки приватизації Україна в 2011 році позбулася статусу країни-виробника первинного алюмінію, не отримавши при цьому компенсації та очікуваних інвестицій для створення нових перспективних виробництв. Базуючись на світовому і вітчизняному досвіді запропоновано шляхи інноваційного розвитку сировинної бази вітчизняного алюмінієвого виробництва з використанням існуючого науково-технічного, виробничого та ресурсного потенціалу. Показано необхідність визначення стратегічних напрямів відродження та модернізації алюмінієвої промисловості Україні у післявоєнний період та на перспективу в рамках розроблення “Державної програми розвитку алюмінієвої промисловості України до 2050 року”....


  • Open Access

    Aluminum industry of Ukraine: from decline to potential growth

    by Physico-technological Institute of Metals and Alloys of the NAS of Ukraine, A.G. Prygunova, L.G. Tuboltsev, A.V. Narivskiy, L.V. Sokol

    Aluminum industry of Ukraine: from decline to potential growth


  • Open Access

    The concept of sustainable development of ferrous metallurgy of Ukraine in modern conditions

    by L.G. Tuboltsev, О.Ye. Merkulov, A.G. Prygunova, A.V. Narivskiy

    The concept of sustainable development of ferrous metallurgy of Ukraine in modern conditions


  • Expert-mathematical assessment of the development of black metallurgy of Ukraine

    by L. G. Tuboltsev, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, V. O. Gorokhova

    The article considers the possibility of analyzing the current state and development prospects of the metallurgical industry through the use of a complex indicator of probability. It is shown that the assessment of the state and prospects of the development of metallurgical production is connected with the need to take into account many criteria that have different values and dimensions, since the very concept of the state and prospects is complex and characterized by a large number of private parameters. The use of expert evaluation and logical experiments based on expert evaluations using the data of experimental studies deserves special attention. To solve multi-criteria problems and optimize the operation of complex production systems, in particular, metallurgical production, the generalized Harrington desirability function was used and improved. To move from a dimensionless indicator of this function to an indicator in real cases, an indicator of the probability of an event is introduced. To analyze the state and forecast of the metallurgical industry, 24 parameters characterizing its work have been determined. Possible scenarios and stages of development of ferrous metallurgy were discussed, priority directions for the near, medium and long term were determined. The presented results show that in 2021 the state of Ukrainian ferrous metallurgy can be assessed as "satisfactory" and in 2022 as "very bad" due to the military aggression of the Russian Federation against Ukraine. However, even in the conditions of martial law, the loss of 60% of metallurgical capacities, constant missile attacks and destroyed logistics, the industry continued to produce products as much as possible. The analysis showed that the post-war years will not be easy for metallurgists and by 2025 the state of the industry should be expected as "satisfactory". The state of MMC of Ukraine can reach the level of "good-very good" by 2050. The conducted theoretical studies allow us to draw a conclusion about the possibility and expediency of using Harrington's desirability function to solve the problem of assessing the achievement of the objectives of the development of the metallurgical industry.

  • Scientific and technical support of the Concept of sustainable development of black metallurgy of Ukraine

    by Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, O. I. Babachenko, L. G. Tuboltsev, O. Ye. Merkulov, G. V. Levchenko

    The article examines the prospects of scientific and technical support for the development of ferrous metallurgical Ukraine, taking into account the consequences of the military aggression of the Russian Federation. On the basis of a comprehensive analysis of the current state of the industry, the possibilities of implementing modern and promising technologies of metallurgical production have been determined in accordance with the proposed project "Concept of sustainable development of ferrous metallurgy of Ukraine". Possible scenarios and stages of development of ferrous metallurgy were discussed, priority directions for the near, medium and long term were determined. It was emphasized that the development of the ferrous metallurgical and mining and metallurgical complex of Ukraine as a whole should be connected with the implementation of the best available technologies (Best Available Techniques), conducting promising scientific research and implementing systematic scientific and technical support of production. The priority areas of development of sub-sectors of the metallurgical industry are considered. Prospective ways of improving technologies for all main metallurgical processes are proposed. It was noted that along with the improvement of the process of obtaining iron in blast furnaces, it is expedient to develop off-blast production using raw materials available in Ukraine. Progress in steelmaking is, first of all, due to the improvement of modern oxygen-converter and electric steelmaking technologies. It was established that rolling production needs modernization of industrial equipment and an increase in the range of metal products. It is shown that the decarbonization of steel production should become a promising direction for the development of the metallurgical industry and one of the means of solving environmental problems. Target indicators of sustainable development and effectiveness of scientific and technical support of the metallurgical industry in the perspective of 2050 have been determined. The successful solution of the tasks and the implementation of the future development directions defined by the Concept will allow the metallurgical industry to firmly establish itself on the trajectory of sustainable growth and provide Ukraine with one of the competitive advantages in the international arena.


  • Concept of sustainable development of metallurgy of Ukraine. Condition, experience, prospects

    by L. Tuboltsev, A. Prygunova, A. Narivskyi, V. Petrenko

    Колективна монографія містить широке коло питань розвитку чорної металургії, які розглядаються в контексті теоретичних, економічних та технологічних особливостей сучасного стану та еволюції. Аналізуються підходи та способи забезпечення сталого розвитку гірничо-металургійного комплексу України в умовах світового та вітчизняного виробництва металопродукції, а також відновлення металургії України після її руйнації внаслідок воєнної агресії РФ. Розглянуто сучасні металургійні процеси та інноваційні технології управління сталим розвитком. Представлено методичні розробки щодо аналізу виробництва, моделювання і прогнозу очікуваних перспектив. У кожному розділі наведено цілі та результати досліджень металургійних процесів, а також список рекомендованих бібліографічних посилань. Книга призначена для широкого кола фахівців чорної металургії та суміжних з нею спеціальностей, а також студентів металургійних, економічних і адміністративних профілів вищих навчальних закладів.


  • PROSPECTS OF DECARBONIZATION OF METALLURGICAL TECHNOLOGIES

    by Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, O. I. Babachenko, L. G. Tuboltsev, O. Ye. Merkulov

    The article considers the possibilities of using decarbonization technologies in the production of steel products. The world experience of using advanced technologies is generalized and the possibilities of their application in metallurgical production are presented, taking into account the emissions of carbon dioxide responsible for the greenhouse effect and global warming of the Earth. The directions of research projects in the metallurgical industry, the results and the conclusions that follow from them are presented. Possibilities of application of decarbonization technologies in the process of preparation of charge materials, production of cast iron and steel are shown. It is noted that the trend of decarbonization of steel significantly changes traditional metallurgy. At the same time, the possibilities of modern technologies of metal production do not allow to significantly abandon the use of natural gas and carbon (coal and coke) as a reducing agent and energy source in metallurgical production processes. Possibilities of modern and perspective metallurgical processes concerning production of products with the minimum carbon trace are shown. The problems facing the metallurgy of Ukraine to reduce СО2 emissions and the introduction of technologies for decarbonization of metal production are highlighted. It is shown that for the implementation of steel decarbonization processes it is necessary to take into account the following: the need for structural restructuring of the metallurgical industry; the need for radical modernization of the metallurgical industry through the introduction of fundamentally new energy-saving production technologies; limiting inefficient exports of raw materials and semi-finished products; introduction of "green" steel production technologies; strengthening the role of research in the production of metallurgical products with low carbon footprint; strengthening the interaction of science, enterprises and the state in the implementation of global projects for the production of low-carbon metallurgical products.


  • ПРОБЛЕМНІ АСПЕКТИ РОЗВИТКУ ГІРНИЧО-МЕТАЛУРГІЙНОГО КОМПЛЕКСУ УКРАЇНИ

    by Leonid Tuboltsev, Anatoliy Grinev

    Метою роботи є виявлення позитивних моментів розвитку чорної металургії України в сучасних умовах нової промислової революції. Відзначено, що чорна металургія і сьогодні визначає економіку промислово розвинених країн як базова галузь. Україна має всі можливості для розвитку металургії, володіє сировинним, промисловим і трудовим потенціалом, проте в останні роки галузь втрачає свої позиції. Для аналізу стану чорної металургії в роботі використано найважливіші параметри, що характеризують її роботу, зокрема, обсяги та структура виробництва металопродукції, обсяги і структура експорту і імпорту, цінова політика в галузі, використання інвестиційних ресурсів. Наведено основні характеристики доменного, сталеплавильного і прокатного виробництва. Відзначено, що приватизація підприємств металургійної промисловості свого часу стабілізувала їх роботу, однак y даний час державі слід відродити свій вплив на формування промислової політики в промисловості, і в металургійній галузі зокрема. Наведено аналіз внутрішніх і зовнішніх факторів, що впливають на розвиток металургійної галузі в довгостроковій перспективі. Відзначено, що промислово розвинені країни знижують свій імпортний потенціал за рахунок розвитку власної металургії, що зменшує можливості для експорту металопродукції з інших країн, у т.ч. і з України. Наведено основні завдання, що стоять перед металургією України в сучасних умовах. Відзначено об'єктивні і суб'єктивні чинники, що впливають на роботу металургії. Наведено дані, що характеризують інвестиційні процеси в Україні і РФ в різні роки. Відзначено перспективи розвитку металургійних технологій в Україні. Для вирішення перспективних завдань галузі доцільно розробити Стратегію розвитку промисловості і ширше використовувати науково-технічний потенціал вітчизняних науково-дослідних інститутів, в т.ч. НАН України.

  • TECHNOLOGICAL DEVELOPMENT OF FERROUS METALLURGY OF UKRAINE IN THE MEDIUM-TERM AND LONG-TERM PERSPECTIVE

    by A.I. Babachenko, L.G. Tuboltsev

    The purpose of the study is to identify current trends in metallurgical technologies, taking into account environmental problems. The world is undergoing major changes in environmental policy, which has become an integral part of industrial policy and international trade. The analysis shows a certain connection between the increase in Earth's temperature and the growth of steel production in the world. Therefore, the Paris Climate Agreement, which was supported by most industrialized countries, is based on the idea of limiting and reducing greenhouse gas emissions by industrial enterprises. On the one hand, industrial emissions undoubtedly affect the ecological state of the environment. On the other hand, a sharp reduction in production emissions significantly increases financial costs. In the world, environmental requirements for metallurgical processes are gaining such a level that threatens the prospects for the development of metallurgy. It is shown that the choice of the optimal path of ecological development requires the search for new solutions to increase the level of implementation of ecological innovations by Ukrainian enterprises. To identify the impact of production technologies of different types of metallurgical products, the method of expert-mathematical evaluation using the Harrington desirability function was used. It is shown that for rolled products the rating means «satisfactory» or «good». The situation with the production of iron ore, pig iron and steel is worse - here a comprehensive assessment shows the value of «unsatisfactory» and «satisfactory». This thesis is confirmed by the fact that investments of ecological orientation of the Ukrainian metallurgical enterprises are now directed on improvement of ecological indicators in the specified directions. Prospects for the development of metallurgy in Ukraine should be associated with the implementation of new technical solutions, in particular those developments that are in the stage of exploratory research and experimental samples. Scientific developments of the Iron and Steel Institute of the National Academy of Sciences of Ukraine, aimed at reducing energy consumption and improving the environmental performance of metallurgical production