Bastian Stumpf
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Bastian Stumpf has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Ilia V. Roisman
Technical University Darmstadt
6 shared publications - Jeanette Hussong
Institute for Fluid Mechanics and Aerodynamics, Technical University of Darmstadt, 64287 Darmstadt, Germany
5 shared publications - Cameron Tropea
Technical University of Darmstadt
2 shared publications - Holger Marschall
Technical University Darmstadt
2 shared publications - Lukas Weimar
Technische Universität Darmstadt, Institute for Fluid Mechanics and Aerodynamics Peter-Grünberg-Straße 10 , 64287 Darmstadt
2 shared publications - Martin Wörner
Institute of Catalysis Research and Technology, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
2 shared publications
Latest Publications
- 16 July 2026
- Published by Elsevier in Computers & Fluids
- Vol. 318
Insights into the dynamics of crown splash using a phase-field interface capturing method
- 16 July 2026
- Published by Elsevier in Computers & Fluids
- Vol. 318
Insights into the dynamics of crown splash using a phase-field interface capturing method
- Open Access
- 1 November 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
Drop impact on a heated pre-wetted wall: Deposition-on-crater splash regime
The impact of a liquid drop with high Reynolds and Weber numbers on a wet solid surface typically results in the emergence, rising, and expansion of a corona-like thin jet. This phenomenon is explained by the propagation of a kinematic discontinuity within the wall film. Conventional theories suggest that the corona-forming liquid jet comprises material from the impacting drop and wall film. In this study, the impact of a drop on a wall film is observed using a high-speed video system. Simultaneously, the distribution of the contact temperature at the substrate surface is measured with a high-speed infrared system. The results reveal that heat transfer predominantly occurs within the thin thermal boundary layers in the drop and substrate. Moreover, our experiments show that under our specific conditions, the drop deposits at the base of the crater, while only the wall film produces the corona and splashes. Correspondingly, the secondary drops consist only of the heated material of the wall film. This regime has not been previously reported in the literature. The validated models for the diameter of the cold spot, the characteristic time, and the contact temperature developed in this study can be potentially useful for reliable modeling of spray cooling.
- 1 November 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
Open AccessDrop impact on a heated pre-wetted wall: Deposition-on-crater splash regime
The impact of a liquid drop with high Reynolds and Weber numbers on a wet solid surface typically results in the emergence, rising, and expansion of a corona-like thin jet. This phenomenon is explained by the propagation of a kinematic discontinuity within the wall film. Conventional theories suggest that the corona-forming liquid jet comprises material from the impacting drop and wall film. In this study, the impact of a drop on a wall film is observed using a high-speed video system. Simultaneously, the distribution of the contact temperature at the substrate surface is measured with a high-speed infrared system. The results reveal that heat transfer predominantly occurs within the thin thermal boundary layers in the drop and substrate. Moreover, our experiments show that under our specific conditions, the drop deposits at the base of the crater, while only the wall film produces the corona and splashes. Correspondingly, the secondary drops consist only of the heated material of the wall film. This regime has not been previously reported in the literature. The validated models for the diameter of the cold spot, the characteristic time, and the contact temperature developed in this study can be potentially useful for reliable modeling of spray cooling.
- Open Access
- 22 December 2024
- Published by Elsevier in International Journal of Multiphase Flow
- Vol. 184
Drop impact onto a moving substrate: Aerodynamic rebound
- 22 December 2024
- Published by Elsevier in International Journal of Multiphase Flow
- Vol. 184
Open AccessDrop impact onto a moving substrate: Aerodynamic rebound
- Open Access
- 30 January 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 956, A10
Drop impact onto a substrate wetted by another liquid: corona detachment from the wall film
Drop impact onto a thin liquid film of another liquid is observed and characterized using a high-speed video system. A new mode of splash – a complete, simultaneous corona detachment – has been observed, which is the result of the lamella breakup near the wall film. The abrupt outward and upward displacement of the lamella leads to an extreme stretching of the corona wall, resulting in its rapid thinning and a rupture. This rupture triggers propagating Taylor–Culick rims, which rapidly spread, meet and, thus, undercut simultaneously the entire corona, resulting in its detachment. Special experiments with the spreading corona impingement onto a fixed needle, supplement the physical evidence of the above-mentioned mechanism. A self-consistent theory of the observed phenomena is proposed and compared with experiments, exhibiting good agreement.
- 30 January 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 956, A10
Open AccessDrop impact onto a substrate wetted by another liquid: corona detachment from the wall film
Drop impact onto a thin liquid film of another liquid is observed and characterized using a high-speed video system. A new mode of splash – a complete, simultaneous corona detachment – has been observed, which is the result of the lamella breakup near the wall film. The abrupt outward and upward displacement of the lamella leads to an extreme stretching of the corona wall, resulting in its rapid thinning and a rupture. This rupture triggers propagating Taylor–Culick rims, which rapidly spread, meet and, thus, undercut simultaneously the entire corona, resulting in its detachment. Special experiments with the spreading corona impingement onto a fixed needle, supplement the physical evidence of the above-mentioned mechanism. A self-consistent theory of the observed phenomena is proposed and compared with experiments, exhibiting good agreement.
- Open Access
- 20 October 2022
- Published by MDPI AG in Colloids and Interfaces
- Vol. 6 (4) , 58
Drop Impact onto a Substrate Wetted by Another Liquid: Flow in the Wall Film
The impact of a drop onto a liquid film is relevant for many natural phenomena and industrial applications such as spray painting, inkjet printing, agricultural sprays, or spray cooling. In particular, the height of liquid remaining on the substrate after impact is of special interest for painting and coating but also for applications involving heat transfer from the wall. While much progress has been made in explaining the hydrodynamics of drop impact onto a liquid film of the same liquid, the physics of drop impact onto a wall film with different material properties is still not well understood. In this study, drop impact onto a very thin liquid film of another liquid is investigated. The thickness of the film remaining on a substrate after drop impact is measured using a chromatic-confocal line sensor. It is interesting that the residual film thickness does not depend on the initial thickness of the wall film, but strongly depends on its viscosity. A theoretical model for the flow in the drop and wall film is developed which accounts for the development of viscous boundary layers in both liquids. The theoretical predictions agree well with the experimental data.
- 20 October 2022
- Published by MDPI AG in Colloids and Interfaces
- Vol. 6 (4) , 58
Open AccessDrop Impact onto a Substrate Wetted by Another Liquid: Flow in the Wall Film
The impact of a drop onto a liquid film is relevant for many natural phenomena and industrial applications such as spray painting, inkjet printing, agricultural sprays, or spray cooling. In particular, the height of liquid remaining on the substrate after impact is of special interest for painting and coating but also for applications involving heat transfer from the wall. While much progress has been made in explaining the hydrodynamics of drop impact onto a liquid film of the same liquid, the physics of drop impact onto a wall film with different material properties is still not well understood. In this study, drop impact onto a very thin liquid film of another liquid is investigated. The thickness of the film remaining on a substrate after drop impact is measured using a chromatic-confocal line sensor. It is interesting that the residual film thickness does not depend on the initial thickness of the wall film, but strongly depends on its viscosity. A theoretical model for the flow in the drop and wall film is developed which accounts for the development of viscous boundary layers in both liquids. The theoretical predictions agree well with the experimental data.
- Open Access
- 12 July 2022
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 100 (9) , 2291-2308
A unified finite volume framework for phase‐field simulations of an arbitrary number of fluid phases
- 12 July 2022
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 100 (9) , 2291-2308
Open AccessA unified finite volume framework for phase‐field simulations of an arbitrary number of fluid phases
- Open Access
- 6 July 2022
- Published by Springer Nature in Experiments in Fluids
- Vol. 63 (7) , 1-13
An imaging technique for determining the volume fraction of two-component droplets of immiscible fluids
Droplets within droplets occur in numerous situations in which two immiscible liquids interact, for instance, binary drop collisions or when a drop of one liquid impacts onto a film of a different liquid, ejecting secondary droplets containing both liquids. In the present study, an imaging technique for determining the volume fraction of each liquid component in such two-component droplets is introduced, in which multiple images of the same droplet at different times are used. The processing of these images is supported by a machine learning algorithm, which is taught using synthetically generated images and validated on droplets with known mixture fractions placed in an acoustic levitator. The application of the technique is demonstrated by measuring the volume fraction in splashed secondary droplets following the impact of a drop of one liquid onto a film of a different liquid. Graphical
- 6 July 2022
- Published by Springer Nature in Experiments in Fluids
- Vol. 63 (7) , 1-13
Open AccessAn imaging technique for determining the volume fraction of two-component droplets of immiscible fluids
Droplets within droplets occur in numerous situations in which two immiscible liquids interact, for instance, binary drop collisions or when a drop of one liquid impacts onto a film of a different liquid, ejecting secondary droplets containing both liquids. In the present study, an imaging technique for determining the volume fraction of each liquid component in such two-component droplets is introduced, in which multiple images of the same droplet at different times are used. The processing of these images is supported by a machine learning algorithm, which is taught using synthetically generated images and validated on droplets with known mixture fractions placed in an acoustic levitator. The application of the technique is demonstrated by measuring the volume fraction in splashed secondary droplets following the impact of a drop of one liquid onto a film of a different liquid. Graphical
- 1 February 2021
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 6 (2) , 023101
Delaying leading edge vortex detachment by plasma flow control at topologically critical locations
Flapping wing propulsion offers unrivaled maneuverability and efficiency at low flight speeds and in hover. These advantages are attributed to the leading edge vortex developing on an unsteady wing, which induces additional lift. We propose and validate a manipulation hypothesis that allows prolongation of the leading edge vortex growth phase, by delaying its detachment with the aid of flow control. This approach targets an overall lift increase on unsteady airfoils. A dielectric barrier discharge plasma actuator is successfully used to compress secondary structures upstream of the main vortex on a pitching and plunging flat plate. To determine flow control timing and location, the tangential velocity on the airfoil surface is used, which is also used to quantify topological effects of flow control. This flow control is then tested for different motion kinematics on a NACA 0012 airfoil. An increase of the peak circulation of the leading edge vortex of about 20% for all cases with flow control indicates that this approach is applicable for various kinematics, dynamics, and airfoil types.
- 1 February 2021
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 6 (2) , 023101
Delaying leading edge vortex detachment by plasma flow control at topologically critical locations
Flapping wing propulsion offers unrivaled maneuverability and efficiency at low flight speeds and in hover. These advantages are attributed to the leading edge vortex developing on an unsteady wing, which induces additional lift. We propose and validate a manipulation hypothesis that allows prolongation of the leading edge vortex growth phase, by delaying its detachment with the aid of flow control. This approach targets an overall lift increase on unsteady airfoils. A dielectric barrier discharge plasma actuator is successfully used to compress secondary structures upstream of the main vortex on a pitching and plunging flat plate. To determine flow control timing and location, the tangential velocity on the airfoil surface is used, which is also used to quantify topological effects of flow control. This flow control is then tested for different motion kinematics on a NACA 0012 airfoil. An increase of the peak circulation of the leading edge vortex of about 20% for all cases with flow control indicates that this approach is applicable for various kinematics, dynamics, and airfoil types.