Apinun Buritatum
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Apinun Buritatum has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Suksun Horpibulsuk
Suranaree Univ. of Technology
6 shared publications - Menglim Hoy
School of Civil Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand
5 shared publications - Apichat Suddeepong
Suranaree University of Technology
4 shared publications - Arul Arulrajah
Professor, Dept. of Civil and Construction Engineering, Swinburne Univ. of Technology, Melbourne, VIC 3122, Australia. ORCID:
4 shared publications - Teerasak Yaowarat
Program in Civil and Infrastructure Engineering, Institute of Engineering, Center of Excellence in Innovation for Sustainable Infrastructure Development, Suranaree University of Technology
4 shared publications - Kongsak Akkharawongwhatthana
Center of Excellence in Innovation for Sustainable Infrastructure Development, Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand
3 shared publications
Latest Publications
- 2 October 2026
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 27 (1)
Development of a high-temperature asphalt pavement temperature prediction model for performance grade zoning in Thailand
1. Asphalt pavement performance is strongly temperature-dependent because temperature governs asphalt binder rheology and, consequently, the mechanical response of asphalt mixtures. Elevated paveme...
- 2 October 2026
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 27 (1)
Development of a high-temperature asphalt pavement temperature prediction model for performance grade zoning in Thailand
1. Asphalt pavement performance is strongly temperature-dependent because temperature governs asphalt binder rheology and, consequently, the mechanical response of asphalt mixtures. Elevated paveme...
- Open Access
- 6 November 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (22) , 9676
Masterbatch Natural Rubber—Innovative Asphalt Cement Additive for Sustainable Flexural Pavements
The mechanical performance of Masterbatch Natural Rubber (MNR)-modified asphalt concrete (MNR-AC) was investigated and is presented in this paper. When compared to conventional asphalt concrete (AC), MNR-AC exhibits significantly superior performance across key mechanical parameters, including Marshall stability, indirect tensile strength (ITS), resilient modulus (IT Mr), indirect tensile fatigue life (ITFL), and rutting resistance. The most pronounced enhancements are observed at the optimal dry rubber to asphalt cement (r/b) ratio of 3%, at which MNR-AC demonstrates peak performance in all evaluated tests. The fatigue distress models for MNR-AC and AC reveal distinct logarithmic relationships, with an intersection point occurring at an r/b ratio of approximately 3%. This suggests that MNR-AC with an r/b ratio of 3% or less exhibits a markedly superior fatigue life compared to conventional AC under equivalent applied-stress conditions. MNR offers significant practical advantages over liquid natural rubber, including more consistent mixing, and simplified storage and transportation, positioning it as a promising and sustainable advancement in pavement material technology.
- 6 November 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (22) , 9676
Open AccessMasterbatch Natural Rubber—Innovative Asphalt Cement Additive for Sustainable Flexural Pavements
The mechanical performance of Masterbatch Natural Rubber (MNR)-modified asphalt concrete (MNR-AC) was investigated and is presented in this paper. When compared to conventional asphalt concrete (AC), MNR-AC exhibits significantly superior performance across key mechanical parameters, including Marshall stability, indirect tensile strength (ITS), resilient modulus (IT Mr), indirect tensile fatigue life (ITFL), and rutting resistance. The most pronounced enhancements are observed at the optimal dry rubber to asphalt cement (r/b) ratio of 3%, at which MNR-AC demonstrates peak performance in all evaluated tests. The fatigue distress models for MNR-AC and AC reveal distinct logarithmic relationships, with an intersection point occurring at an r/b ratio of approximately 3%. This suggests that MNR-AC with an r/b ratio of 3% or less exhibits a markedly superior fatigue life compared to conventional AC under equivalent applied-stress conditions. MNR offers significant practical advantages over liquid natural rubber, including more consistent mixing, and simplified storage and transportation, positioning it as a promising and sustainable advancement in pavement material technology.
- 30 November 2023
- Published by Springer Nature in Clean Technologies and Environmental Policy
- Vol. 26 (3) , 741-754
Fatigue performance evaluation of bottom ash-modified asphalt concretes using various aggregate types
- 30 November 2023
- Published by Springer Nature in Clean Technologies and Environmental Policy
- Vol. 26 (3) , 741-754
Fatigue performance evaluation of bottom ash-modified asphalt concretes using various aggregate types
- Open Access
- 19 April 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (8) , 6860
Hemp Fiber-Modified Asphalt Concretes with Reclaimed Asphalt Pavement for Low-Traffic Roads
Reclaimed asphalt pavement (RAP) contributes substantially to the volume of recycled waste in the world. This research aims to evaluate the mechanistic performance of asphalt concrete with 100% RAP (RAP-AC) modified with natural hemp fiber (HF) reinforcement. The effects of HF lengths and HF contents on the mechanistic performance were investigated. The static tests included Marshall stability, strength index (SI), and indirect tensile strength (ITS), whilst the cyclic tests included indirect tensile resilient modulus (IT Mr), indirect tensile fatigue life (ITFL), and rutting resistance tests. The microstructural analysis revealed that HF could absorb more asphalt cement and function as a reinforcement. The 0.05% HF with a 24 mm HF length was suggested as the best ingredient. For various stress levels, the higher resilience properties—due to the addition of HF—contribute to higher levels of ITFL and rutting resistance. Based on a critical analysis of the cyclic test data, the distress model for HF-RAP-AC was developed for mechanistic pavement design. The outcome of this research promotes the usage of HF-RAP-AC as a greener material for low-traffic roads, which account for over 70% of the total roads worldwide.
- 19 April 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (8) , 6860
Open AccessHemp Fiber-Modified Asphalt Concretes with Reclaimed Asphalt Pavement for Low-Traffic Roads
Reclaimed asphalt pavement (RAP) contributes substantially to the volume of recycled waste in the world. This research aims to evaluate the mechanistic performance of asphalt concrete with 100% RAP (RAP-AC) modified with natural hemp fiber (HF) reinforcement. The effects of HF lengths and HF contents on the mechanistic performance were investigated. The static tests included Marshall stability, strength index (SI), and indirect tensile strength (ITS), whilst the cyclic tests included indirect tensile resilient modulus (IT Mr), indirect tensile fatigue life (ITFL), and rutting resistance tests. The microstructural analysis revealed that HF could absorb more asphalt cement and function as a reinforcement. The 0.05% HF with a 24 mm HF length was suggested as the best ingredient. For various stress levels, the higher resilience properties—due to the addition of HF—contribute to higher levels of ITFL and rutting resistance. Based on a critical analysis of the cyclic test data, the distress model for HF-RAP-AC was developed for mechanistic pavement design. The outcome of this research promotes the usage of HF-RAP-AC as a greener material for low-traffic roads, which account for over 70% of the total roads worldwide.
- Open Access
- 2 February 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (3) , 2680
Geothermal Pavements: Experimental Testing, Prototype Testing, and Numerical Analysis of Recycled Demolition Wastes
Geothermal pavements have the potential to reduce the pavement surface temperature by circulating fluid in pipes within the pavement structure. This research investigated an innovative geothermal pavement system with multiple benefits, such as reducing the surface temperature and harvesting heat energy for power generation. This research aimed to provide an understanding of the mechanical properties of geothermal pavements constructed with construction and demolition (C&D) waste materials through large-scale physical testing, experimental testing, small-scale prototype testing, and numerical simulation. The mechanical properties of the geothermal pavement system were assessed under long-term traffic loading conditions using a prototype test system. The repeated load triaxial and repeated-load California bearing ratio tests were also undertaken to evaluate the effect of pipe inclusion on the permanent deformation, stiffness, and strength of the pavement base. A numerical model was subsequently developed and calibrated using the data from small-scale prototype testing. In addition, the effects of the flow rate and pipe materials on the thermal performances of the geothermal pavements were also investigated in this research. The inclusion of pipes in the pavement base layer was found to have negligible detrimental effects on the deformation behavior of RCA. The resilient moduli of recycled concrete aggregate (RCA) samples slightly decreased with the inclusion of pipes. An HDPE pipe reduced the stiffness of the RCA + HDPE mix. On the other hand, a copper pipe’s high stiffness improved the mix’s strength. The numerical simulations indicated that for the HDPE pipe, increasing the flow rate from 500 mL/min to 2000 mL/min reduced the surface temperature by approximately 1.3%, while using the copper pipe resulted in an approximately 4% further decrease in the surface temperature compared to the HDPE pipe.
- 2 February 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (3) , 2680
Open AccessGeothermal Pavements: Experimental Testing, Prototype Testing, and Numerical Analysis of Recycled Demolition Wastes
Geothermal pavements have the potential to reduce the pavement surface temperature by circulating fluid in pipes within the pavement structure. This research investigated an innovative geothermal pavement system with multiple benefits, such as reducing the surface temperature and harvesting heat energy for power generation. This research aimed to provide an understanding of the mechanical properties of geothermal pavements constructed with construction and demolition (C&D) waste materials through large-scale physical testing, experimental testing, small-scale prototype testing, and numerical simulation. The mechanical properties of the geothermal pavement system were assessed under long-term traffic loading conditions using a prototype test system. The repeated load triaxial and repeated-load California bearing ratio tests were also undertaken to evaluate the effect of pipe inclusion on the permanent deformation, stiffness, and strength of the pavement base. A numerical model was subsequently developed and calibrated using the data from small-scale prototype testing. In addition, the effects of the flow rate and pipe materials on the thermal performances of the geothermal pavements were also investigated in this research. The inclusion of pipes in the pavement base layer was found to have negligible detrimental effects on the deformation behavior of RCA. The resilient moduli of recycled concrete aggregate (RCA) samples slightly decreased with the inclusion of pipes. An HDPE pipe reduced the stiffness of the RCA + HDPE mix. On the other hand, a copper pipe’s high stiffness improved the mix’s strength. The numerical simulations indicated that for the HDPE pipe, increasing the flow rate from 500 mL/min to 2000 mL/min reduced the surface temperature by approximately 1.3%, while using the copper pipe resulted in an approximately 4% further decrease in the surface temperature compared to the HDPE pipe.
- Open Access
- 8 June 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (12) , 7033
Improved Performance of Asphalt Concretes using Bottom Ash as an Alternative Aggregate
Road networks are major infrastructures that support the economic development in both developed and developing countries. Bottom ash (BA) is a by-product from coal-fired powerplants, which is composed of a lipophilic molecule with effective reactivity to bituminous binder. BA was adopted in this research, as a green fine aggregate, to improve the mechanistic performance of asphalt concretes in this research. The effect of BA-replacement ratio (0%, 10%, 15%, 20% and 25%, by total weight of natural fine aggregate) on the Marshall stability and flow, indirect tensile strength (ITS), and mechanistic performance of BA-asphalt concrete, were examined. The mechanistic performance tests included the indirect-tensile condition (indirect tensile resilient modulus (IT Mr), indirect tensile fatigue life (ITFL)) and compressive condition (permanent deformation (PD), rut depth, and skid resistance). BA replacement improves the Marshall stability and flow, strength index, and ITS, up to the optimum BA-replacement ratio, of 5%. The change in IT Mr was found to be linearly proportional to the change in ITS, for all BA-replacement ratios. The ITFL is dependent upon the repeated stress level and can be estimated in terms of IT Mr. For the compressive condition, the PD, rutting, and skid resistances were found to be improved by the BA replacement. The lowest PD and rut depth as well as the highest skid resistance, for IT Mr and ITFL, were found at the optimum BA-replacement ratio, of 5%. The outcome of this research will promote the usage of BA as a cleaner additive in asphalt concrete pavement, which is useful in terms of engineering and environmental perspectives.
- 8 June 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (12) , 7033
Open AccessImproved Performance of Asphalt Concretes using Bottom Ash as an Alternative Aggregate
Road networks are major infrastructures that support the economic development in both developed and developing countries. Bottom ash (BA) is a by-product from coal-fired powerplants, which is composed of a lipophilic molecule with effective reactivity to bituminous binder. BA was adopted in this research, as a green fine aggregate, to improve the mechanistic performance of asphalt concretes in this research. The effect of BA-replacement ratio (0%, 10%, 15%, 20% and 25%, by total weight of natural fine aggregate) on the Marshall stability and flow, indirect tensile strength (ITS), and mechanistic performance of BA-asphalt concrete, were examined. The mechanistic performance tests included the indirect-tensile condition (indirect tensile resilient modulus (IT Mr), indirect tensile fatigue life (ITFL)) and compressive condition (permanent deformation (PD), rut depth, and skid resistance). BA replacement improves the Marshall stability and flow, strength index, and ITS, up to the optimum BA-replacement ratio, of 5%. The change in IT Mr was found to be linearly proportional to the change in ITS, for all BA-replacement ratios. The ITFL is dependent upon the repeated stress level and can be estimated in terms of IT Mr. For the compressive condition, the PD, rutting, and skid resistances were found to be improved by the BA replacement. The lowest PD and rut depth as well as the highest skid resistance, for IT Mr and ITFL, were found at the optimum BA-replacement ratio, of 5%. The outcome of this research will promote the usage of BA as a cleaner additive in asphalt concrete pavement, which is useful in terms of engineering and environmental perspectives.