Qinhuan Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qinhuan Xu has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Qiang Zhan
Robotics Institute, Beihang University, Beijing, China
4 shared publications - Xinyang Tian
Hangzhou Innovation Institute, Beihang University, Hangzhou, China
3 shared publications - Lingxiao Jiang
Robotics Institute, Beihang University, Beijing, China
2 shared publications - Yin Zhang
Beijing Electro-Mechanical Engineering Institute, Beijing, China
2 shared publications - Junyi Zou
Robotics Institute of Beihang University, Beijing, China
1 shared publication
Latest Publications
- 29 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 21 (4) , 5779-5789
Impedance Control of an Anthropomorphic Hands Without Finger Force Sensors
With multiple fingers and multi-DOFs, an anthropomorphic hand can compliantly grasp objects with complex shape and low stiffness. In order to realize compliant grasp, contact force control between the anthropomorphic hand and the object is necessary. However, due to limited finger space for sensors and wiring, many anthropomorphic hands do not possess finger force sensors, so how to realize their compliant grasp control becomes a key issue. To solve this problem, this paper presents an impedance control method based on contact force observers and joint friction compensation for anthropomorphic hands without finger force sensors. A generalized momentum observer is used to estimate contact force, and an improved “static friction $+$ Coulomb $+$ viscous” model is adopted to realize joint friction compensation. The proposed impedance control method is verified both by simulations in Simulink and grasp experiments of an anthropomorphic hand. All the results show the method can not only estimate contact forces accurately and compensate joint friction, but also compliantly grasp objects with low stiffness and complex shape. Note to Practitioners —This paper is motivated by the demand for grasp control in anthropomorphic hands without finger force sensors. Force feedback is important in grasp control of anthropomorphic hands, but installing force sensors is highly challenging due to limited finger space for sensors and wiring, and the attendant consequences of increasing weight, volume and expenses. In order to realize such sensor-less grasp control, we present an impedance control method by calculating contact forces with a generalized momentum observer and estimating finger joint friction by an improved speed-friction model. Simulation studies and prototype experiments show the proposed method can stably grasp objects with varying stiffness and complex shapes while realizing expected dynamic characteristics. The proposed method can be used for other anthropomorphic hands without finger force sensors to improve their grasping capability. In future research, we will test the proposed method on more anthropomorphic hands without finger force sensors.
- 29 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 21 (4) , 5779-5789
Impedance Control of an Anthropomorphic Hands Without Finger Force Sensors
With multiple fingers and multi-DOFs, an anthropomorphic hand can compliantly grasp objects with complex shape and low stiffness. In order to realize compliant grasp, contact force control between the anthropomorphic hand and the object is necessary. However, due to limited finger space for sensors and wiring, many anthropomorphic hands do not possess finger force sensors, so how to realize their compliant grasp control becomes a key issue. To solve this problem, this paper presents an impedance control method based on contact force observers and joint friction compensation for anthropomorphic hands without finger force sensors. A generalized momentum observer is used to estimate contact force, and an improved “static friction $+$ Coulomb $+$ viscous” model is adopted to realize joint friction compensation. The proposed impedance control method is verified both by simulations in Simulink and grasp experiments of an anthropomorphic hand. All the results show the method can not only estimate contact forces accurately and compensate joint friction, but also compliantly grasp objects with low stiffness and complex shape. Note to Practitioners —This paper is motivated by the demand for grasp control in anthropomorphic hands without finger force sensors. Force feedback is important in grasp control of anthropomorphic hands, but installing force sensors is highly challenging due to limited finger space for sensors and wiring, and the attendant consequences of increasing weight, volume and expenses. In order to realize such sensor-less grasp control, we present an impedance control method by calculating contact forces with a generalized momentum observer and estimating finger joint friction by an improved speed-friction model. Simulation studies and prototype experiments show the proposed method can stably grasp objects with varying stiffness and complex shapes while realizing expected dynamic characteristics. The proposed method can be used for other anthropomorphic hands without finger force sensors to improve their grasping capability. In future research, we will test the proposed method on more anthropomorphic hands without finger force sensors.
- 23 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 8 (1) , 152-159
Simplified Configuration Design of Anthropomorphic Hand Imitating Specific Human Hand Grasps
How to design an anthropomorphic hand imitating specific human hand grasps with as few actuators as possible is still a challenge. This paper presents a method for obtaining a simplified configuration of anthropomorphic hand imitating specific human hand grasps based on the motion analyses of the human hand. A participation matrix which characterizes a human hand grasp on joint motion level is constructed according to the motion participation of each finger joint. By adding all participation matrices of expected human hand grasps together a total participation matrix can be derived, and through mathematical processing a simplified anthropomorphic hand configuration can be obtained. Following the proposed method, a simplified anthropomorphic hand configuration that imitates six basic human hand grasps was obtained. A series of grasp experiments with the anthropomorphic hand prototype were conducted to validate the grasping capability as well as the proposed simplified configuration design method. This method can help to obtain a reasonably simplified configuration of an anthropomorphic hand when expected human hand grasps are definite.
- 23 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 8 (1) , 152-159
Simplified Configuration Design of Anthropomorphic Hand Imitating Specific Human Hand Grasps
How to design an anthropomorphic hand imitating specific human hand grasps with as few actuators as possible is still a challenge. This paper presents a method for obtaining a simplified configuration of anthropomorphic hand imitating specific human hand grasps based on the motion analyses of the human hand. A participation matrix which characterizes a human hand grasp on joint motion level is constructed according to the motion participation of each finger joint. By adding all participation matrices of expected human hand grasps together a total participation matrix can be derived, and through mathematical processing a simplified anthropomorphic hand configuration can be obtained. Following the proposed method, a simplified anthropomorphic hand configuration that imitates six basic human hand grasps was obtained. A series of grasp experiments with the anthropomorphic hand prototype were conducted to validate the grasping capability as well as the proposed simplified configuration design method. This method can help to obtain a reasonably simplified configuration of an anthropomorphic hand when expected human hand grasps are definite.
- Open Access
- 25 February 2021
- Published by Copernicus GmbH in Mechanical Sciences
- Vol. 12 (1) , 221-235
A real-time inverse kinematics solution based on joint perturbation for redundant manipulators
Aiming at the problem that the calculation of the inverse kinematics solution of redundant manipulators is very time-consuming, this paper presents a real-time method based on joint perturbation and joint motion priority. The method first seeks the pose nearest to the target pose in the manipulator's pose set through fine-tuning all the joints with different angle deviations at the same time and then regards this pose as the starting one to perform iterative calculations until the error between the current pose and the target pose is less than the predetermined error, thus obtaining the inverse kinematics solution corresponding to the target pose. This method can avoid the pseudo-inverse calculations of the Jacobian matrix and significantly reduce the solving complexity. Two types of manipulators are taken as examples to validate the proposed method. Under the premise that the manipulator motion trajectory is satisfied, the Jacobian pseudo-inverse method and the proposed method are both adopted to solve the inverse kinematics. Simulations and comparisons show that the proposed method has better real-time performance, and the joint motions can be flexibly controlled by setting different joint motion priorities. This method can make the work cycle faster and improve the production efficiency of redundant manipulators in real applications.
- 25 February 2021
- Published by Copernicus GmbH in Mechanical Sciences
- Vol. 12 (1) , 221-235
Open AccessA real-time inverse kinematics solution based on joint perturbation for redundant manipulators
Aiming at the problem that the calculation of the inverse kinematics solution of redundant manipulators is very time-consuming, this paper presents a real-time method based on joint perturbation and joint motion priority. The method first seeks the pose nearest to the target pose in the manipulator's pose set through fine-tuning all the joints with different angle deviations at the same time and then regards this pose as the starting one to perform iterative calculations until the error between the current pose and the target pose is less than the predetermined error, thus obtaining the inverse kinematics solution corresponding to the target pose. This method can avoid the pseudo-inverse calculations of the Jacobian matrix and significantly reduce the solving complexity. Two types of manipulators are taken as examples to validate the proposed method. Under the premise that the manipulator motion trajectory is satisfied, the Jacobian pseudo-inverse method and the proposed method are both adopted to solve the inverse kinematics. Simulations and comparisons show that the proposed method has better real-time performance, and the joint motions can be flexibly controlled by setting different joint motion priorities. This method can make the work cycle faster and improve the production efficiency of redundant manipulators in real applications.
- Open Access
- 26 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 20089-20099
Link Lengths Optimization Based on Multiple Performance Indexes of Anthropomorphic Manipulators
How to determine the optimal link length parameters according to task requirements and constraints is a key problem in the design of anthropomorphic manipulators. Considering multiple performance indexes such as dexterity and end stiffness, this article presents a method on how to maximally improve the comprehensive motion performance of anthropomorphic manipulators by optimizing the link lengths. Firstly, the joint motion ranges of human arm are obtained through analyzing the motion mechanism and the motion forms. Then the kinematics model of manipulators with the optimal configuration is established by using screw theory, and a comprehensive evaluation index for the motion performance is proposed by considering the Jacobian matrix condition number, manipulability, and end stiffness. Taking the evaluation index as the objective function, the corresponding constraints and the optimization model are established to optimize the link lengths of manipulators with both flexibility and stiffness. Through comparative analyses, it can be seen that the global comprehensive performance index value of the optimized anthropomorphic manipulators increases by about 23.97%, and the motion performance is significantly improved.
- 26 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 20089-20099
Open AccessLink Lengths Optimization Based on Multiple Performance Indexes of Anthropomorphic Manipulators
How to determine the optimal link length parameters according to task requirements and constraints is a key problem in the design of anthropomorphic manipulators. Considering multiple performance indexes such as dexterity and end stiffness, this article presents a method on how to maximally improve the comprehensive motion performance of anthropomorphic manipulators by optimizing the link lengths. Firstly, the joint motion ranges of human arm are obtained through analyzing the motion mechanism and the motion forms. Then the kinematics model of manipulators with the optimal configuration is established by using screw theory, and a comprehensive evaluation index for the motion performance is proposed by considering the Jacobian matrix condition number, manipulability, and end stiffness. Taking the evaluation index as the objective function, the corresponding constraints and the optimization model are established to optimize the link lengths of manipulators with both flexibility and stiffness. Through comparative analyses, it can be seen that the global comprehensive performance index value of the optimized anthropomorphic manipulators increases by about 23.97%, and the motion performance is significantly improved.