Nicolao Cerqueira Lima
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Nicolao Cerqueira Lima has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Erick de Moraes Franklin
Universidade Estadual de Campinas (UNICAMP)
10 shared publications - Willian Righi Assis
St. Anthony Falls Laboratory University of Minnesota Twin Cities Minneapolis MN USA
7 shared publications - Carlos Azael Alvarez
Department of Earth & Planetary Sciences, Stanford University, Stanford, USA
5 shared publications - Fernando David Cúñez
Department of Earth and Environmental Sciences University of Rochester Rochester NY USA
5 shared publications - Douglas Daniel de Carvalho
Universidade Estadual de Campinas (UNICAMP)
3 shared publications - Danilo S. Borges
UNICAMP - University of Campinas
2 shared publications
Latest Publications
- Open Access
- 12 June 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Earth Surface
- Vol. 130 (6)
Barchans Interacting With Dune‐Size Obstacles: Details of the Fluid Flow and Motion of Grains
We investigate details of the interaction of subaqueous barchans with dune‐size obstacles by carrying out numerical simulations where the fluid is solved at the grain scale and the motions of individual grains are computed at all time steps. With the outputs, we analyze the disturbances of the fluid flow, the trajectories of grains, and the resultant force on each grain, the latter being unfeasible from experiments and field measurements. We show that in some cases particles pass over the obstacle, while in others they completely circumvent it (without touching it), or are even blocked. For the circumvention and blocking cases, which we call bypass and trapped, respectively, we show the existence of a strong vortex between the lee face of the dune and the obstacle. This vortex results from the interactions of recirculation regions and horseshoe vortices, and has enough strength to deviate the main flow and carry grains around the obstacle in those cases. Our results shed light on the reasons for passing over, circumventing, and blocking, and contribute to our understanding of dunes in the presence of large obstacles such as hills, crater rims, and human constructions.
- 12 June 2025
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Earth Surface
- Vol. 130 (6)
Open AccessBarchans Interacting With Dune‐Size Obstacles: Details of the Fluid Flow and Motion of Grains
We investigate details of the interaction of subaqueous barchans with dune‐size obstacles by carrying out numerical simulations where the fluid is solved at the grain scale and the motions of individual grains are computed at all time steps. With the outputs, we analyze the disturbances of the fluid flow, the trajectories of grains, and the resultant force on each grain, the latter being unfeasible from experiments and field measurements. We show that in some cases particles pass over the obstacle, while in others they completely circumvent it (without touching it), or are even blocked. For the circumvention and blocking cases, which we call bypass and trapped, respectively, we show the existence of a strong vortex between the lee face of the dune and the obstacle. This vortex results from the interactions of recirculation regions and horseshoe vortices, and has enough strength to deviate the main flow and carry grains around the obstacle in those cases. Our results shed light on the reasons for passing over, circumventing, and blocking, and contribute to our understanding of dunes in the presence of large obstacles such as hills, crater rims, and human constructions.
- Open Access
- 11 January 2025
- Published by Wiley
Barchans interacting with dune-size obstacles: details of the fluid flow and motion of grains
We investigate details of the interaction of subaqueous barchans with dune-size obstacles by carrying out numerical simulations where the fluid is solved at the grain scale and the motions of individual grains are computed at all time steps. With the outputs, we analyze the disturbances of the fluid flow, the trajectories of grains, and the resultant force on each grain, the latter being unfeasible from experiments and field measurements. We show that in some cases particles pass over the obstacle, while in others they completely circumvent it (without touching it), or are even blocked. For the circumvention and blocking cases, which we call bypass and trapped, respectively, we show the existence of a strong vortex between the lee face of the dune and the obstacle. This vortex results from the interactions of recirculation regions and horseshoe vortices, and has enough strength to deviate the main flow and carry grains around the obstacle in those cases. Our results shed light on the reasons for passing over, circumventing, and blocking, and contribute to our understanding of dunes in the presence of large obstacles such as hills, crater rims, and human constructions.
- 11 January 2025
- Published by Wiley
Open AccessBarchans interacting with dune-size obstacles: details of the fluid flow and motion of grains
We investigate details of the interaction of subaqueous barchans with dune-size obstacles by carrying out numerical simulations where the fluid is solved at the grain scale and the motions of individual grains are computed at all time steps. With the outputs, we analyze the disturbances of the fluid flow, the trajectories of grains, and the resultant force on each grain, the latter being unfeasible from experiments and field measurements. We show that in some cases particles pass over the obstacle, while in others they completely circumvent it (without touching it), or are even blocked. For the circumvention and blocking cases, which we call bypass and trapped, respectively, we show the existence of a strong vortex between the lee face of the dune and the obstacle. This vortex results from the interactions of recirculation regions and horseshoe vortices, and has enough strength to deviate the main flow and carry grains around the obstacle in those cases. Our results shed light on the reasons for passing over, circumventing, and blocking, and contribute to our understanding of dunes in the presence of large obstacles such as hills, crater rims, and human constructions.
- 13 August 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Earth Surface
- Vol. 129 (8)
Barchan‐Barchan Dune Repulsion Investigated at the Grain Scale
Barchans are eolian dunes of crescent shape found on Earth, Mars and other celestial bodies. Among the different types of barchan‐barchan interaction, there is one, known as chasing, in which the dunes remain close but without touching each other. In this paper, we investigate the origins of this barchan‐barchan dune repulsion by carrying out grain‐scale numerical computations in which a pair of granular heaps is deformed by the fluid flow into barchan dunes that interact with each other. In our simulations, data such as position, velocity and resultant force are computed for each individual particle at each time step, allowing us to measure details of both the fluid and grains that explain the repulsion. We show the trajectories of grains, time‐average resultant forces, and mass balances for each dune, and that the downstream barchan shrinks faster than the upstream one, keeping, thus, a relatively high velocity although in the wake of the upstream barchan. In its turn, this fast shrinkage is caused by the flow disturbance, which induces higher erosion on the downstream barchan and its circumvention by grains leaving the upstream dune. Our results help explaining the mechanisms behind the distribution of barchans in dune fields found on Earth and Mars.
- 13 August 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Earth Surface
- Vol. 129 (8)
Barchan‐Barchan Dune Repulsion Investigated at the Grain Scale
Barchans are eolian dunes of crescent shape found on Earth, Mars and other celestial bodies. Among the different types of barchan‐barchan interaction, there is one, known as chasing, in which the dunes remain close but without touching each other. In this paper, we investigate the origins of this barchan‐barchan dune repulsion by carrying out grain‐scale numerical computations in which a pair of granular heaps is deformed by the fluid flow into barchan dunes that interact with each other. In our simulations, data such as position, velocity and resultant force are computed for each individual particle at each time step, allowing us to measure details of both the fluid and grains that explain the repulsion. We show the trajectories of grains, time‐average resultant forces, and mass balances for each dune, and that the downstream barchan shrinks faster than the upstream one, keeping, thus, a relatively high velocity although in the wake of the upstream barchan. In its turn, this fast shrinkage is caused by the flow disturbance, which induces higher erosion on the downstream barchan and its circumvention by grains leaving the upstream dune. Our results help explaining the mechanisms behind the distribution of barchans in dune fields found on Earth and Mars.
- Open Access
- 12 April 2024
- Published by Wiley
Barchan-barchan repulsion investigated at the grain scale
Barchans are dunes of crescent shape found on Earth, Mars and other celestial bodies. Among the different types of barchan-barchan interaction, there is one, known as chasing, in which the dunes remain close but without touching each other. In this paper, we investigate the origins of this barchan-barchan repulsion by carrying out grain-scale numerical computations in which a pair of granular heaps is deformed by the fluid flow into barchan dunes that interact with each other. In our simulations, data such as position, velocity and resultant force are computed for each individual particle at each time step, allowing us to measure details of both the fluid and grains that explain the repulsion. We show the trajectories of grains, time-average resultant forces, and mass balances for each dune, and that the downstream barchan shrinks faster than the upstream one, keeping, thus, a relatively high velocity although in the wake of the upstream barchan. In its turn, this fast shrinkage is caused by the flow disturbance, which induces higher erosion on the downstream barchan and its circumvention by grains leaving the upstream dune. Our results help explaining the mechanisms behind the distribution of barchans in dune fields found on Earth and Mars.
- 12 April 2024
- Published by Wiley
Open AccessBarchan-barchan repulsion investigated at the grain scale
Barchans are dunes of crescent shape found on Earth, Mars and other celestial bodies. Among the different types of barchan-barchan interaction, there is one, known as chasing, in which the dunes remain close but without touching each other. In this paper, we investigate the origins of this barchan-barchan repulsion by carrying out grain-scale numerical computations in which a pair of granular heaps is deformed by the fluid flow into barchan dunes that interact with each other. In our simulations, data such as position, velocity and resultant force are computed for each individual particle at each time step, allowing us to measure details of both the fluid and grains that explain the repulsion. We show the trajectories of grains, time-average resultant forces, and mass balances for each dune, and that the downstream barchan shrinks faster than the upstream one, keeping, thus, a relatively high velocity although in the wake of the upstream barchan. In its turn, this fast shrinkage is caused by the flow disturbance, which induces higher erosion on the downstream barchan and its circumvention by grains leaving the upstream dune. Our results help explaining the mechanisms behind the distribution of barchans in dune fields found on Earth and Mars.
- 22 November 2023
- Published by American Physical Society (APS) in Physical Review E
- Vol. 108 (5) , 054904
Impact craters formed by spinning granular projectiles
Craters formed by the impact of agglomerated materials are commonly observed in nature, such as asteroids colliding with planets and moons. In this paper, we investigate how the projectile spin and cohesion lead to different crater shapes. For that, we carried out discrete element method computations of spinning granular projectiles impacting onto cohesionless grains for different bonding stresses, initial spins, and initial heights. We found that, as the bonding stresses decrease and the initial spin increases, the projectile's grains spread farther from the collision point, and in consequence, the crater shape becomes flatter, with peaks around the rim and in the center of the crater. Our results shed light on the dispersion of the projectile's material and the different shapes of craters found on Earth and other planetary environments.
- 22 November 2023
- Published by American Physical Society (APS) in Physical Review E
- Vol. 108 (5) , 054904
Impact craters formed by spinning granular projectiles
Craters formed by the impact of agglomerated materials are commonly observed in nature, such as asteroids colliding with planets and moons. In this paper, we investigate how the projectile spin and cohesion lead to different crater shapes. For that, we carried out discrete element method computations of spinning granular projectiles impacting onto cohesionless grains for different bonding stresses, initial spins, and initial heights. We found that, as the bonding stresses decrease and the initial spin increases, the projectile's grains spread farther from the collision point, and in consequence, the crater shape becomes flatter, with peaks around the rim and in the center of the crater. Our results shed light on the dispersion of the projectile's material and the different shapes of craters found on Earth and other planetary environments.
- 21 April 2023
- Published by American Physical Society (APS) in Physical Review E
- Vol. 107 (4) , 044901
Roles of packing fraction, microscopic friction, and projectile spin in cratering by impact
From small seeds falling from trees to asteroids colliding with planets and moons, the impact of projectiles onto granular targets occurs in nature at different scales. In this paper, we investigate open questions in the mechanics of granular cratering, in particular, the forces acting on the projectile and the roles of granular packing, grain-grain friction, and projectile spin. For that, we carried out discrete element method computations of the impact of solid projectiles on a cohesionless granular medium, where we varied the projectile and grain properties (diameter, density, friction, and packing fraction) for different available energies (within relatively small values). We found that a denser region forms below the projectile, pushing it back and causing its rebound by the end of its motion, and that solid friction affects considerably the crater morphology. Besides, we show that the penetration length increases with the initial spin of the projectile, and that differences in initial packing fractions can engender the diversity of scaling laws found in the literature. Finally, we propose an ad hoc scaling that collapsed our data for the penetration length and can perhaps unify existing correlations. Our results provide new insights into the formation of craters in granular matter.
- 21 April 2023
- Published by American Physical Society (APS) in Physical Review E
- Vol. 107 (4) , 044901
Roles of packing fraction, microscopic friction, and projectile spin in cratering by impact
From small seeds falling from trees to asteroids colliding with planets and moons, the impact of projectiles onto granular targets occurs in nature at different scales. In this paper, we investigate open questions in the mechanics of granular cratering, in particular, the forces acting on the projectile and the roles of granular packing, grain-grain friction, and projectile spin. For that, we carried out discrete element method computations of the impact of solid projectiles on a cohesionless granular medium, where we varied the projectile and grain properties (diameter, density, friction, and packing fraction) for different available energies (within relatively small values). We found that a denser region forms below the projectile, pushing it back and causing its rebound by the end of its motion, and that solid friction affects considerably the crater morphology. Besides, we show that the penetration length increases with the initial spin of the projectile, and that differences in initial packing fractions can engender the diversity of scaling laws found in the literature. Finally, we propose an ad hoc scaling that collapsed our data for the penetration length and can perhaps unify existing correlations. Our results provide new insights into the formation of craters in granular matter.
- 6 December 2022
- Published by AIP Publishing
- Vol. 34 (12) , 123320
10.1063/5.0121810.2
Barchans are crescent-shaped dunes commonly found in diverse environments and scales: from the 10-cm-long barchans found under water to the 1-km-long barchans on Mars, passing by the 100-m-long dunes on Earth's deserts. Although ubiquitous in nature, there is a lack of grain-scale computations of the growth and evolution of those bedforms. In this paper, we investigate the values of grain properties (coefficients of sliding friction, rolling friction, and restitution) necessary to carry out numerical simulations of subaqueous barchans with CFD–DEM (computational fluid dynamics–discrete element method), and how the values of those coefficients change the barchan dynamics. We made use of LES (large eddy simulation) for the fluid, varied the coefficients of sliding friction, rolling friction, and restitution in the DEM, and compared the outputs with experiments. We show (i) for the case of glass spheres, the values of coefficients for correctly obtaining the dune morphology, timescales, trajectories of individual grains, and forces experienced by grains; (ii) the LES meshes allowing computations of bedload while capturing the main disturbances of the fluid flow; (iii) how different values of coefficients affect the morphology of barchans; and (iv) that spheres with higher coefficients of rolling friction can be used for simulating barchans consisting of angular grains. Our results represent a significant step for performing simulations that capture, at the same time, details of the fluid flow (large eddies) and grains' motion (individual particles).
- 6 December 2022
- Published by AIP Publishing
- Vol. 34 (12) , 123320
10.1063/5.0121810.2
Barchans are crescent-shaped dunes commonly found in diverse environments and scales: from the 10-cm-long barchans found under water to the 1-km-long barchans on Mars, passing by the 100-m-long dunes on Earth's deserts. Although ubiquitous in nature, there is a lack of grain-scale computations of the growth and evolution of those bedforms. In this paper, we investigate the values of grain properties (coefficients of sliding friction, rolling friction, and restitution) necessary to carry out numerical simulations of subaqueous barchans with CFD–DEM (computational fluid dynamics–discrete element method), and how the values of those coefficients change the barchan dynamics. We made use of LES (large eddy simulation) for the fluid, varied the coefficients of sliding friction, rolling friction, and restitution in the DEM, and compared the outputs with experiments. We show (i) for the case of glass spheres, the values of coefficients for correctly obtaining the dune morphology, timescales, trajectories of individual grains, and forces experienced by grains; (ii) the LES meshes allowing computations of bedload while capturing the main disturbances of the fluid flow; (iii) how different values of coefficients affect the morphology of barchans; and (iv) that spheres with higher coefficients of rolling friction can be used for simulating barchans consisting of angular grains. Our results represent a significant step for performing simulations that capture, at the same time, details of the fluid flow (large eddies) and grains' motion (individual particles).
- 6 December 2022
- Published by AIP Publishing
- Vol. 34 (12) , 123320
10.1063/5.0121810.1
Barchans are crescent-shaped dunes commonly found in diverse environments and scales: from the 10-cm-long barchans found under water to the 1-km-long barchans on Mars, passing by the 100-m-long dunes on Earth's deserts. Although ubiquitous in nature, there is a lack of grain-scale computations of the growth and evolution of those bedforms. In this paper, we investigate the values of grain properties (coefficients of sliding friction, rolling friction, and restitution) necessary to carry out numerical simulations of subaqueous barchans with CFD–DEM (computational fluid dynamics–discrete element method), and how the values of those coefficients change the barchan dynamics. We made use of LES (large eddy simulation) for the fluid, varied the coefficients of sliding friction, rolling friction, and restitution in the DEM, and compared the outputs with experiments. We show (i) for the case of glass spheres, the values of coefficients for correctly obtaining the dune morphology, timescales, trajectories of individual grains, and forces experienced by grains; (ii) the LES meshes allowing computations of bedload while capturing the main disturbances of the fluid flow; (iii) how different values of coefficients affect the morphology of barchans; and (iv) that spheres with higher coefficients of rolling friction can be used for simulating barchans consisting of angular grains. Our results represent a significant step for performing simulations that capture, at the same time, details of the fluid flow (large eddies) and grains' motion (individual particles).
- 6 December 2022
- Published by AIP Publishing
- Vol. 34 (12) , 123320
10.1063/5.0121810.1
Barchans are crescent-shaped dunes commonly found in diverse environments and scales: from the 10-cm-long barchans found under water to the 1-km-long barchans on Mars, passing by the 100-m-long dunes on Earth's deserts. Although ubiquitous in nature, there is a lack of grain-scale computations of the growth and evolution of those bedforms. In this paper, we investigate the values of grain properties (coefficients of sliding friction, rolling friction, and restitution) necessary to carry out numerical simulations of subaqueous barchans with CFD–DEM (computational fluid dynamics–discrete element method), and how the values of those coefficients change the barchan dynamics. We made use of LES (large eddy simulation) for the fluid, varied the coefficients of sliding friction, rolling friction, and restitution in the DEM, and compared the outputs with experiments. We show (i) for the case of glass spheres, the values of coefficients for correctly obtaining the dune morphology, timescales, trajectories of individual grains, and forces experienced by grains; (ii) the LES meshes allowing computations of bedload while capturing the main disturbances of the fluid flow; (iii) how different values of coefficients affect the morphology of barchans; and (iv) that spheres with higher coefficients of rolling friction can be used for simulating barchans consisting of angular grains. Our results represent a significant step for performing simulations that capture, at the same time, details of the fluid flow (large eddies) and grains' motion (individual particles).
- 1 December 2022
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (12) , 123320
Grain-scale computations of barchan dunes
Barchans are crescent-shaped dunes commonly found in diverse environments and scales: from the 10-cm-long barchans found under water to the 1-km-long barchans on Mars, passing by the 100-m-long dunes on Earth's deserts. Although ubiquitous in nature, there is a lack of grain-scale computations of the growth and evolution of those bedforms. In this paper, we investigate the values of grain properties (coefficients of sliding friction, rolling friction, and restitution) necessary to carry out numerical simulations of subaqueous barchans with CFD–DEM (computational fluid dynamics–discrete element method), and how the values of those coefficients change the barchan dynamics. We made use of LES (large eddy simulation) for the fluid, varied the coefficients of sliding friction, rolling friction, and restitution in the DEM, and compared the outputs with experiments. We show (i) for the case of glass spheres, the values of coefficients for correctly obtaining the dune morphology, timescales, trajectories of individual grains, and forces experienced by grains; (ii) the LES meshes allowing computations of bedload while capturing the main disturbances of the fluid flow; (iii) how different values of coefficients affect the morphology of barchans; and (iv) that spheres with higher coefficients of rolling friction can be used for simulating barchans consisting of angular grains. Our results represent a significant step for performing simulations that capture, at the same time, details of the fluid flow (large eddies) and grains' motion (individual particles).
- 1 December 2022
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (12) , 123320
Grain-scale computations of barchan dunes
Barchans are crescent-shaped dunes commonly found in diverse environments and scales: from the 10-cm-long barchans found under water to the 1-km-long barchans on Mars, passing by the 100-m-long dunes on Earth's deserts. Although ubiquitous in nature, there is a lack of grain-scale computations of the growth and evolution of those bedforms. In this paper, we investigate the values of grain properties (coefficients of sliding friction, rolling friction, and restitution) necessary to carry out numerical simulations of subaqueous barchans with CFD–DEM (computational fluid dynamics–discrete element method), and how the values of those coefficients change the barchan dynamics. We made use of LES (large eddy simulation) for the fluid, varied the coefficients of sliding friction, rolling friction, and restitution in the DEM, and compared the outputs with experiments. We show (i) for the case of glass spheres, the values of coefficients for correctly obtaining the dune morphology, timescales, trajectories of individual grains, and forces experienced by grains; (ii) the LES meshes allowing computations of bedload while capturing the main disturbances of the fluid flow; (iii) how different values of coefficients affect the morphology of barchans; and (iv) that spheres with higher coefficients of rolling friction can be used for simulating barchans consisting of angular grains. Our results represent a significant step for performing simulations that capture, at the same time, details of the fluid flow (large eddies) and grains' motion (individual particles).
- 18 March 2022
- Published by American Physical Society (APS) in Physical Review E
- Vol. 105 (3) , 034903
Contacts, motion, and chain breaking in a two-dimensional granular system displaced by an intruder
We investigate numerically how the motion of an intruder within a two-dimensional granular system affects its structure and produces drag on the intruder. We made use of discrete numerical simulations in which a larger disk (intruder) is driven at constant speed amid smaller disks confined in a rectangular cell. By varying the intruder's velocity and the basal friction, we obtained the resultant force on the intruder and the instantaneous network of contact forces, which we analyze at both the cell and grain scales. We found that there is a bearing network that percolates forces from the intruder toward the walls, being responsible for jammed regions and high values of the drag force, and a dissipative network that percolates small forces within the grains, in agreement with previous experiments on compressed granular systems. In addition, we found the anisotropy levels of the contact network for different force magnitudes and regions, that the force network can reach regions far downstream of the intruder by the end of the intruder's motion, that the extent of the force network decreases with decreasing the basal friction, and that the void region (cavity) that appears downstream of the intruder tends to disappear for lower values of the basal friction. Interestingly, our results show that grains within the bearing chains creep while the chains break, revealing the mechanism by which bearing chains collapse.
- 18 March 2022
- Published by American Physical Society (APS) in Physical Review E
- Vol. 105 (3) , 034903
Contacts, motion, and chain breaking in a two-dimensional granular system displaced by an intruder
We investigate numerically how the motion of an intruder within a two-dimensional granular system affects its structure and produces drag on the intruder. We made use of discrete numerical simulations in which a larger disk (intruder) is driven at constant speed amid smaller disks confined in a rectangular cell. By varying the intruder's velocity and the basal friction, we obtained the resultant force on the intruder and the instantaneous network of contact forces, which we analyze at both the cell and grain scales. We found that there is a bearing network that percolates forces from the intruder toward the walls, being responsible for jammed regions and high values of the drag force, and a dissipative network that percolates small forces within the grains, in agreement with previous experiments on compressed granular systems. In addition, we found the anisotropy levels of the contact network for different force magnitudes and regions, that the force network can reach regions far downstream of the intruder by the end of the intruder's motion, that the extent of the force network decreases with decreasing the basal friction, and that the void region (cavity) that appears downstream of the intruder tends to disappear for lower values of the basal friction. Interestingly, our results show that grains within the bearing chains creep while the chains break, revealing the mechanism by which bearing chains collapse.