FYFei Ye

Fei Ye

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Fei Ye has a total of 93 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Interrupting Fe(II)-Catalyzed Ferrihydrite Phase Transformation Enables Sustained Dissimilatory Iron Reduction for Enhanced Anaerobic Digestion

    by Mingwei Wang, Qihe Sun, Zuqi Wang, Mingjie Yu, Yujia Yang, Lili Tian, Yaran Song, Qina Sun, Fei Ye, Zhiqiang Zhao, et al.

    Dissimilatory iron reduction (DIR) offers a promising pathway to enhance anaerobic digestion (AD) performance, yet its efficiency is limited by rapid Fe(III) passivation. Beyond initial Fe(III) bioavailability, Fe(II)-catalyzed phase transformation of Fe(III) into inert minerals emerges as another limiting factor. To address this issue, an anti-passivation strategy was developed by integrating spatial isolation with catecholate-Fe(III) coordination, using polydopamine (PDA) as a model matrix. The results showed that the PDA matrix embedded ferrihydrite nanoparticles within microspheres via catecholate coordination, achieving spatial isolation that physically prevented nanoparticle aggregation and lattice alignment. This strategy achieved 82% Fe(III) reduction efficiency, outperforming conventional ferrihydrite reduction efficiency (27%), while suppressing inert Fe(III) formation by 36%. Density functional theory calculations revealed that PDA weakened the adsorption energy of Fe(II) at Fe(III) sites and lengthened the distance between adjacent Fe(II) and Fe(III) from 2.97 to 3.20 Å. In the AD of waste activated sludge, Fe@PDA increased methane production by 50%. Furthermore, the enhanced DIR facilitated microbial-material electron transfer, improved energy metabolism, enriched iron-reducing bacteria, and upregulated TCA-cycle genes. This work aims to address the long-standing limitations of Fe(III) oxide utilization in DIR-based anaerobic biotechnologies to enhance renewable energy recovery from organic wastes.

  • Open Access

    Sodium Alginate–Starch Composite Hydrogel Encapsulated Laccase–Tetracycline-Degrading Bacteria Synergistic System: Construction and Tetracycline Degradation Performance in Coastal Sediments

    by Yanuo Wu, Shuaijie Wang, Kang Xiao, Jinglei Sun, Fei Ye

    Aiming at the pain points of the multi-phase coexistence of tetracycline antibiotics in coastal marine sediments and the difficulty of efficient removal by traditional single remediation technologies, this study constructed an immobilized laccase–tetracycline-degrading bacteria synergistic remediation system using a sodium alginate–starch double-network hydrogel as the carrier. Through component ratio optimization, the optimal mass ratio of sodium alginate to starch was determined to be 1:1.5. The SA-S-4 hydrogel beads prepared under this condition exhibited excellent mechanical properties and adsorption performance, and could effectively encapsulate both laccase- and tetracycline-degrading bacteria. The results of coastal sediment remediation experiments showed that the hydrogel encapsulated laccase–tetracycline-degrading bacteria synergistic system (HLTB) could achieve a tetracycline removal efficiency of 63.16% within 10 days, which was significantly better than the pure adsorption group and the free laccase–functional bacterial group. The system exhibited favorable removal performance under relatively low-concentration and low-ambient-temperature conditions, and the optimal dosage of this system was determined to be 0.5 wt%. On the basis of UPLC-MS analysis, this study observed that the synergistic combination of laccase and functional bacteria facilitated extensive structural transformation of the tetracycline parent skeleton, with the formation of abundant low-molecular-weight intermediate products. This performance was associated with the cascade coordination between laccase catalysis and microbial intracellular metabolism, and presented a higher level of structural transformation than the single laccase system, which could effectively reduce the potential ecological risk of tetracycline degradation intermediates. This study provides new technical ideas and theoretical support for the in situ green remediation of tetracycline pollution in coastal sediments.

  • Efficient Photo-Assisted Thermal Catalytic CO2 Methanation by Synergy of Ru Single Atoms and Ni Nanoparticles

    by Kang Xie, Ruichong Qiu, Zhourong Xiao, Leshi Zhang, Xinyi Tan, Fei Ye, Kaihang Sun, Haijiao Lu, Ji-Jun Zou, Desong Wang

    Photoassisted thermal (PAT) catalytic CO2 methanation represents one of the most pivotal chemical conversion routes for the resource utilization of CO2. However, current PAT catalysts still suffer from inadequate low-temperature catalytic activity and high recombination rates of photogenerated carriers. Herein, efficient low-temperature PAT CO2 methanation was achieved by constructing a synergistic catalytic system between Ru single-atom-doped CeO2 and Ni metal nanoparticles (Ni/CeRux, x = 0.01, 0.025, 0.05, and 0.10). Synchrotron radiation characterization results confirmed that Ru was doped into the lattice of CeO2 in the form of single atoms, which induced the formation of abundant surface oxygen vacancies (Ov) and enhanced the adsorption and activation of CO2 molecules. In situ X-ray photoelectron spectroscopy analysis revealed that Ru doping and light irradiation facilitated electron enrichment on the Ni surface, thereby promoting H2 dissociation and CO adsorption. Additionally, Ru doping narrowed the bandgap of CeO2, expanded its light absorption range, suppressed the recombination of photogenerated carriers, and strengthened the photothermal effect. Compared with the Ni/CeO2 catalyst, the Ni/CeRux catalysts exhibited improved low-temperature methanation performance, with an optimal Ru doping amount identified. Specifically, the Ni/CeRu0.025 catalyst achieved a maximum CH4 production rate of 223 mmol gcat−1 h−1 at 225 °C under a light intensity of 1.2 W cm−2. Moreover, the catalyst demonstrated sustained stability; after 100 h of continuous reaction, the conversion of CO2 remained at approximately 76%, and the CH4 selectivity remained above 99.6%. In situ diffuse reflectance infrared Fourier transform spectroscopy results indicated that formate (HCOO*) served as the dominant reaction intermediate. Density functional theory calculations further demonstrated that Ru single-atom doping regulated the stabilization and transformation of intermediates involved in the formate pathway, altered the rate-determining step (RDS) of the reaction, and reduced its energy barrier, thereby accelerating the overall reaction process. This work developed a synergistic catalytic system based on Ru single atoms and Ni nanoparticles for low-temperature CO2 methanation, providing a promising strategy for the efficient resource utilization of CO2.


  • Open Access

    Synergistic Photoelectrocatalytic Degradation of Tetracycline Using Phosphate-Grafted Mo:BiVO4 Photoanode Coupled with Pd/CMK-3 Cathode for Dual-Functional Activation of Water and Molecular Oxygen

    by Minglei Yang, Zhenhong Xu, Chongjun Tang, Shuaijie Wang, Zhourong Xiao, Fei Ye

    This research introduces a synergistic photoelectrocatalytic (PEC) system designed for the effective degradation of tetracycline (TC), integrating a PO43−-grafted Mo-doped BiVO4 (PO43−-Mo:BiVO4) photoanode with a Pd-loaded ordered mesoporous carbon (Pd/CMK-3) cathode. The incorporation of Mo doping and PO43− modification significantly improved the photoanode’s charge separation efficiency, achieving a photocurrent density of 2.9 mA cm−2, and fine-tuned its band structure to enhance hydroxyl radical (·OH) generation. Meanwhile, the Pd/CMK-3 cathode promoted a two-electron oxygen reduction reaction pathway, producing hydrogen peroxide (H2O2) and facilitating molecular oxygen activation via atomic hydrogen (H*) intermediates. Under optimized conditions—1.0 V vs. Ag/AgCl of anodic potential, pH 6.58, and oxygen saturation—the combined system accomplished 80% TC degradation within 60 min, markedly surpassing the performance of the photoanode (72%) or cathode (71%) alone. Notably, this synergistic approach also reduced energy consumption to 0.0065 kWh m−3, outperforming individual components. Radical quenching experiments and liquid chromatography–mass spectrometry (LC-MS) analysis revealed that the photogenerated holes (h+) and ·OH were the key reactive species responsible for TC mineralization. The system demonstrated remarkable stability, with only a 2.96% decline in activity, and effectively degraded other contaminants, such as phenol, 4-chlorophenol, and ciprofloxacin. This study highlights an energy-efficient PEC strategy that harnesses the combined strengths of anodic oxidation and cathodic molecular oxygen activation to significantly enhance the removal of organic pollutants.


  • Enhanced Photothermal Catalytic Conversion of CO2 into CO Using Uniformly Dispersed Pt on Mesoporous TiO2

    by Xining Guo, Huiying Li, Leshi Zhang, Rui Hao, Fei Ye, Jianmin Gu, Kaihang Sun, Guozhu Li, Ji−Jun Zou, Zhourong Xiao, et al.


  • Stabilization of Pt Single Atoms on Ni(OH)2/C with Abundant Ni Vacancies for Clean Energy and Valuable Chemicals in Direct Methanol Fuel Cells

    by Munir Ahmad, Muhammad Bilal Hussain, Waseem Raza, Muhammad Asim Mushtaq, Andleeb Mehmood, Shahzad Afzal, Yang Yang, Jiahui Chen, Fei Ye, Zhengxin Zeng, et al.

    The challenges in direct methanol fuel cells (DMFCs) arise from using traditional noble metal anode catalysts, which result in unwanted CO2 emissions. Developing single-atom catalysts (SACs) with high metal loading is crucial for partial methanol oxidation to formate while reducing CO2 emissions. However, this faces difficulties like sintering and CO poisoning of single atoms (SAs) during methanol oxidation reaction (MOR). Though using support vacancies to stabilize metal atoms shows promise for SAC synthesis, cation vacancy defects, especially for methanol oxidation, have received little attention. Here, we have prepared PtSA on a Ni(OH)2/C support with abundant Ni vacancies (PtSA–Ni(OH)2/C–VNi) as an anode catalyst. The DMFC with this catalyst provides outstanding results of 613.83 mA cm–2 current and 79.5 mW cm–2 power densities at the potential of 0.63 V with 99.63% Faraday efficiency for formate production at 70 °C, with a minimum amount of CO2 emissions. Pt atoms on VNi drive methanol adsorption and CO detoxification, enhancing partial methanol oxidation to formate. DFT further confirmed that methanol favorably forms formate instead of CO2 in PtSA–Ni(OH)2/C–VNi due to a lower energy barrier (1.08 eV) for OCH conversion to HCOOH. This study provides a way for developing high-performance, CO2-free SA-based anode catalysts for DMFCs.


  • Reversible Sol–Gel Transitions Mediated Organics Selective Uptake and Release for Simultaneous Water Purification and Chemicals Recovery

    by Zhenxing Zeng, Xiaohan Xu, Meirou Huang, Jie Mao, Fei Ye, Munir Ahmad, Xiaojing Wang, Hong Peng, Xiaohui Lu, Shihuai Deng, et al.

    The separation and recovery of useful organics from wastewater have been a promising alternative to tackling water pollution and resource shortages, while strategies that truly work have rarely been explored. Herein, a reversible CO2 triggered sol-gel state transformation mediated selective organics uptake-release system using a surface modified carbonitride (S-CN) is proposed and exhibits remarkable organics recovery performance from wastewater. Results show that CO2 can serve as a cross-linker for linking S-CN particles to form a hydrogel by electrostatic interaction and hydrogen bonding, which can be recycled to the pristine sol state simply by removing the cross-linked CO2 with Ar purging. The reversible sol-gel transformation achieves nearly complete uptake of valuable organics from wastewater with high selectivity at the first sol-to-gel stage through electrostatic interaction, hydrogen bonding, and π-π interactions together, and it recovers 90% of the organics uptaked by releasing them into a concentrated solution at the second gel-back-to-sol stage.


  • Direct Methanol Fuel Cell with Porous Carbon-Supported PtRu Single-Atom Catalysts for Coproduction of Electricity and Value-Added Formate

    by Munir Ahmad, Muhammad Bilal Hussain, Jiahui Chen, Yang Yang, Xuexian Wu, Hao Chen, Shahzad Afzal, Waseem Raza, Zhengxin Zeng, Fei Ye, et al.


  • Few-Layer Meets Crystalline Structure: Collaborative Efforts for Improving Photocatalytic H2O2 Generation over Carbon Nitride

    by Longfei Li, Hui Zhang, Fei Ye, Zhourong Xiao, Zhenxing Zeng, Houfen Li, Munir Ahmad, Shuaijie Wang, Qingrui Zhang

    Although the conversion of O2 and H2O to H2O2 over graphite carbon nitride (g-C3N4) has been realized by means of the photocatalytic process, the catalytic activity of pristine g-C3N4 is still restricted by the rapid charge recombination and inadequate exposure of the active site. In this work, we propose a straightforward strategy to solve these limitations by decreasing the thickness and improving the crystallinity of g-C3N4, resulting in the preparation of few-layered crystalline carbon nitride (FL-CCN). Benefiting from the minimal thickness and highly ordered in-plane triangular cavities within the structure, FL-CCN processes an extended π-conjugated system with a reduced charge transfer resistance and expanded specific surface area. These features accelerate the efficiency of photogenerated charge separation in FL-CCN and contribute to explore of its surface active sites. Consequently, FL-CCN exhibits a significantly improved H2O2 evolution rate (63.95 μmol g-1 h-1), which is 7.8 times higher than that of pristine g-C3N4 (8.15 μmol g-1 h-1), during the photocatalytic conversion of O2 and H2O. This systematic investigation offers valuable insights into the mechanism of photocatalytic H2O2 generation and the development of efficient catalysts.