Erqiang Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Erqiang Wang has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
Mingmei Wang
6 shared publications- Chunshan Li
Chinese Academy of Sciences
4 shared publications - Cun-Yue Guo
School of Chemical Sciences, University of Chinese Academy of Sciences, Beijing 101408, China
4 shared publications Erwei Song
4 shared publications- Erwei Song
School of Chemical Sciences, University of Chinese Academy of Sciences, Beijing 100049, China
4 shared publications - Gang Wang
Beijing Key Laboratory of Ionic Liquids Clean Process, CAS Key Laboratory of Green Process and Engineering, Key Laboratory of Mesoscience and Engineering, Institute of Process Engineering Chinese Academy of Sciences Beijing Beijing People's Republic of China
3 shared publications
Latest Publications
- 29 October 2026
- Published by Elsevier in Chemical Engineering Science
- Vol. 339
Asymmetric message-passing graph neural network for topology-aware surrogate modeling of variable-stage distillation columns
- 29 October 2026
- Published by Elsevier in Chemical Engineering Science
- Vol. 339
Asymmetric message-passing graph neural network for topology-aware surrogate modeling of variable-stage distillation columns
- 26 September 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (40) , 19565-19579
Theoretical Development of the Composite Absorbent for Maleic Anhydride Production: Insights from COSMO-RS, VLE Experiments, and Process Simulation
- 26 September 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (40) , 19565-19579
Theoretical Development of the Composite Absorbent for Maleic Anhydride Production: Insights from COSMO-RS, VLE Experiments, and Process Simulation
- 15 July 2025
- Published by Elsevier in Chinese Journal of Chemical Engineering
- Vol. 87, 220-228
Enhanced SO2 reduction to sulfur over mesoporous MoS2-Al2O3 catalyst
- 15 July 2025
- Published by Elsevier in Chinese Journal of Chemical Engineering
- Vol. 87, 220-228
Enhanced SO2 reduction to sulfur over mesoporous MoS2-Al2O3 catalyst
- 13 January 2025
- Published by Elsevier in Chinese Journal of Chemical Engineering
- Vol. 79, 200-211
Dynamic temperature control of dividing wall batch distillation with middle vessel based on neural network soft-sensor and fuzzy control
- 13 January 2025
- Published by Elsevier in Chinese Journal of Chemical Engineering
- Vol. 79, 200-211
Dynamic temperature control of dividing wall batch distillation with middle vessel based on neural network soft-sensor and fuzzy control
- Open Access
- 23 December 2024
- Published by Science China Press., Co. Ltd. in SCIENTIA SINICA Chimica
- Vol. 55 (2) , 433-443
Research progress on membraneless water electrolysis for hydrogen production
氢气是公认的无污染、高热值二次能源载体, 也是不可或缺的化工原料. 在碳达峰、碳中和目标背景下,电解水制取绿氢已成为清洁能源发展的重要组成部分. 电解水制氢虽已商业化应用, 但现有技术面临能量转化率低、设备制造和运行成本高的问题, 限制了其大规模推广. 无膜电解槽作为电解水技术的一项创新, 引入了全新的工作原理,并采用与传统电解槽完全不同的工作模式, 拓展了电-氢转化的技术路线. 无膜电解水技术可分为流动式和分步式两种膜式, 本文从原理和技术上对近年来的相关文献做了系统的梳理和分析, 并对这项技术的应用前景加以展望.
- 23 December 2024
- Published by Science China Press., Co. Ltd. in SCIENTIA SINICA Chimica
- Vol. 55 (2) , 433-443
Open AccessResearch progress on membraneless water electrolysis for hydrogen production
氢气是公认的无污染、高热值二次能源载体, 也是不可或缺的化工原料. 在碳达峰、碳中和目标背景下,电解水制取绿氢已成为清洁能源发展的重要组成部分. 电解水制氢虽已商业化应用, 但现有技术面临能量转化率低、设备制造和运行成本高的问题, 限制了其大规模推广. 无膜电解槽作为电解水技术的一项创新, 引入了全新的工作原理,并采用与传统电解槽完全不同的工作模式, 拓展了电-氢转化的技术路线. 无膜电解水技术可分为流动式和分步式两种膜式, 本文从原理和技术上对近年来的相关文献做了系统的梳理和分析, 并对这项技术的应用前景加以展望.
- Open Access
Multi-Objective Optimization and Design for Industrial Vinyl Chloride Reactor by Hybrid Model
The acetylene conversion rate and vinyl chloride production capacity are the main economic indexes for vinyl chloride synthesis, and the reaction temperature is an important operating parameter to prevent the Hg active component from being loss. These three factors have not been taken into consideration simultaneously in the traditional optimization process, making it difficult to achieve optimization targets perfectly for industrial application. To overcome this problem, an efficient strategy framework was proposed based on a hybrid model. Compared with conventional paradigms, the proposed framework could not only reduce computational expense but optimize these two economic indexes with a constrained reaction temperature simultaneously. In addition, a machine learning method was used to conduct a feature analysis, which can reveal the potential interaction between different variables so key variables of this reactor could be identified. To demonstrate and verify this framework, multi-objective optimization involving multiple variables with constrained conditions for the industrial reactor was conducted from design and operation perspectives, respectively. The proposed strategy could provide optimal operational direction for the industrial reactor from these design and operation aspects, which contribute to the sustainable and highly efficient process development in this field. For the first section of an industrial vinyl chloride reactor, this strategy could realize significant improvement in the acetylene conversion rate from 81.34% to over 95.00% and in the vinyl chloride production capacity from 2.60 to above 3.40 mol/h in the operation scenarios, which can meet production requirements. So, the second section of the traditional reactor system is not needed at all.
Open AccessMulti-Objective Optimization and Design for Industrial Vinyl Chloride Reactor by Hybrid Model
The acetylene conversion rate and vinyl chloride production capacity are the main economic indexes for vinyl chloride synthesis, and the reaction temperature is an important operating parameter to prevent the Hg active component from being loss. These three factors have not been taken into consideration simultaneously in the traditional optimization process, making it difficult to achieve optimization targets perfectly for industrial application. To overcome this problem, an efficient strategy framework was proposed based on a hybrid model. Compared with conventional paradigms, the proposed framework could not only reduce computational expense but optimize these two economic indexes with a constrained reaction temperature simultaneously. In addition, a machine learning method was used to conduct a feature analysis, which can reveal the potential interaction between different variables so key variables of this reactor could be identified. To demonstrate and verify this framework, multi-objective optimization involving multiple variables with constrained conditions for the industrial reactor was conducted from design and operation perspectives, respectively. The proposed strategy could provide optimal operational direction for the industrial reactor from these design and operation aspects, which contribute to the sustainable and highly efficient process development in this field. For the first section of an industrial vinyl chloride reactor, this strategy could realize significant improvement in the acetylene conversion rate from 81.34% to over 95.00% and in the vinyl chloride production capacity from 2.60 to above 3.40 mol/h in the operation scenarios, which can meet production requirements. So, the second section of the traditional reactor system is not needed at all.
- Open Access
- 8 October 2024
- Published by China Science Publishing & Media Ltd. in Journal of Engineering Studies
- Vol. 17 (4) , 413-428
Heat Management of Redox Flow Batteries and Its Progress
液流电池作为一种长时储能技术,具有安全性高、寿命长、容量和功率相互独立、易回收利用等优势,在国内外得到广泛的关注和应用。在其充放电过程中若不对系统温度进行干预,则很容易突破正常运行的温度区间,严重影响电池效率并易发生故障。本文系统梳理了液流电池的产热及散热机理,同时,从加快散热以及抑制产热两个方面综述了目前的热管理方法。最后与锂离子电池的热管理进行对比,希望为后续的科研及产业发展提供参考。
- 8 October 2024
- Published by China Science Publishing & Media Ltd. in Journal of Engineering Studies
- Vol. 17 (4) , 413-428
Open AccessHeat Management of Redox Flow Batteries and Its Progress
液流电池作为一种长时储能技术,具有安全性高、寿命长、容量和功率相互独立、易回收利用等优势,在国内外得到广泛的关注和应用。在其充放电过程中若不对系统温度进行干预,则很容易突破正常运行的温度区间,严重影响电池效率并易发生故障。本文系统梳理了液流电池的产热及散热机理,同时,从加快散热以及抑制产热两个方面综述了目前的热管理方法。最后与锂离子电池的热管理进行对比,希望为后续的科研及产业发展提供参考。
- Open Access
- 8 August 2024
- Published by MDPI AG in Journal of Composites Science
- Vol. 8 (8) , 308
Conductive Polymer-Based Thermoelectric Composites: Preparation, Properties, and Applications
Thermoelectric (TE) materials are capable of realizing the direct conversion between heat and electricity, holding a giant prospect in the sustainable development of modern society. Conductive polymers (CPs) are suitable for the preparation of TE materials given their low-cost, lightweight, flexible, and easy processing properties. With the accelerating pace of flexible composite development, there is intensive interest in their emerging applications in various aspects such as wearable electronics and thermoelectric sensors. In order to further improve the thermoelectric properties, a series of new methods have been proposed to prepare conductive polymer-based thermoelectric composites and improve their thermoelectric properties. In this review, we discuss the compositing methods, properties, and applications of conductive polymer-based TE composites. The challenges and future development directions in the design and application of conductive polymer matrix composites are also pointed out.
- 8 August 2024
- Published by MDPI AG in Journal of Composites Science
- Vol. 8 (8) , 308
Open AccessConductive Polymer-Based Thermoelectric Composites: Preparation, Properties, and Applications
Thermoelectric (TE) materials are capable of realizing the direct conversion between heat and electricity, holding a giant prospect in the sustainable development of modern society. Conductive polymers (CPs) are suitable for the preparation of TE materials given their low-cost, lightweight, flexible, and easy processing properties. With the accelerating pace of flexible composite development, there is intensive interest in their emerging applications in various aspects such as wearable electronics and thermoelectric sensors. In order to further improve the thermoelectric properties, a series of new methods have been proposed to prepare conductive polymer-based thermoelectric composites and improve their thermoelectric properties. In this review, we discuss the compositing methods, properties, and applications of conductive polymer-based TE composites. The challenges and future development directions in the design and application of conductive polymer matrix composites are also pointed out.