Zhiqing Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Zhiqing Yang has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
- Lijian Ding
Department of Respiratory and Critical Care Medicine, The Affiliated Yangming Hospital of Ningbo University (Yuyao People’s Hospital), Ningbo University
14 shared publications - Helong Li
Hefei University of Technology
12 shared publications - Shuang Zhao
Hefei University of Technology
9 shared publications - Rik W. De Doncker
Institute for Power Generation and Storage Systems, E.ON Energy Research Center, RWTH Aachen University, Aachen, Germany
7 shared publications - Xiongfei Wang
Tsinghua University
6 shared publications - Man Zhang
Hefei University of Technology
5 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (11) , 19118-19133
Influence of Packaging Technologies on Pulsed Power Capability of SiC MOSFETs Across Different Timescales
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (11) , 19118-19133
Influence of Packaging Technologies on Pulsed Power Capability of SiC MOSFETs Across Different Timescales
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (11) , 19000-19011
A Two-Stage Turn-On Crosstalk Model for SiC MOSFETs in Half-Bridge Circuits
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (11) , 19000-19011
A Two-Stage Turn-On Crosstalk Model for SiC MOSFETs in Half-Bridge Circuits
- Top Cited Papers
- 1 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Smart Grid
- Vol. 17 (3) , 2614-2617
Design of Flexible DC-SOP Toward Four-Quadrant Power Flow Control in Bipolar Distribution Networks
This letter introduces the direct current soft open point (DC-SOP), which is a bipolar DC-DC converter designed to achieve independent four-quadrant power flow control in bipolar DC distribution networks (BDDNs). For the first time, asymmetric dual active bridges are employed to connect the four-quadrant ports, ensuring a flexible power channel to realize bidirectional power transfer between branches and poles. Bidirectional phase-shift modulation strategy and four-quadrant decoupling facilitate independent power control, effectively mitigating branch overload and inter-pole power unbalance. To improve model linearization accuracy, a refined relaxation method is proposed, providing theoretical guidance for DC-SOP applications in BDDNs. The effectiveness of the proposed method is validated in ±10kV BDDNs with 33 nodes and 123 nodes.
- 1 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Smart Grid
- Vol. 17 (3) , 2614-2617
Top Cited PapersDesign of Flexible DC-SOP Toward Four-Quadrant Power Flow Control in Bipolar Distribution Networks
This letter introduces the direct current soft open point (DC-SOP), which is a bipolar DC-DC converter designed to achieve independent four-quadrant power flow control in bipolar DC distribution networks (BDDNs). For the first time, asymmetric dual active bridges are employed to connect the four-quadrant ports, ensuring a flexible power channel to realize bidirectional power transfer between branches and poles. Bidirectional phase-shift modulation strategy and four-quadrant decoupling facilitate independent power control, effectively mitigating branch overload and inter-pole power unbalance. To improve model linearization accuracy, a refined relaxation method is proposed, providing theoretical guidance for DC-SOP applications in BDDNs. The effectiveness of the proposed method is validated in ±10kV BDDNs with 33 nodes and 123 nodes.
- 3 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. PP (21686777) , 1
Optimized PFM-IPSM Hybrid Modulation and Fast Control Design for CLLLC Resonant Converter Enabling Wide-Gain Operations
CLLLC resonant converter is a promising topology, which plays a crucial role in efficiently integrating energy storage systems, electric vehicles, and other novel loads into distributed generation systems. However, maintaining high performance across a wide voltage gain and load range remains a challenge. This paper presents a comprehensive solution to enhance the efficiency and dynamic response of CLLLC converters. Firstly, an optimized strategy combining pulse frequency modulation and inner phase-shift modulation (PFM-IPSM) is proposed, where turn-off mode analyzed to ensure zero-voltage switching (ZVS) over a wide operation range. Secondly, an analog-digital mixed synchronous rectification (SR) method based on turn-on delay is proposed to achieve efficient and reliable rectification in hybrid modulation modes. Further, a voltage controller combining a PI compensator with a second-order low-pass filter (2LPF) is designed to suppress resonant peak and enable a rapid dynamic response. Finally, a downscaled laboratory prototype is designed and developed, and the effectiveness of the proposed modulation and control strategy are thoroughly verified with experiments.
- 3 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. PP (21686777) , 1
Optimized PFM-IPSM Hybrid Modulation and Fast Control Design for CLLLC Resonant Converter Enabling Wide-Gain Operations
CLLLC resonant converter is a promising topology, which plays a crucial role in efficiently integrating energy storage systems, electric vehicles, and other novel loads into distributed generation systems. However, maintaining high performance across a wide voltage gain and load range remains a challenge. This paper presents a comprehensive solution to enhance the efficiency and dynamic response of CLLLC converters. Firstly, an optimized strategy combining pulse frequency modulation and inner phase-shift modulation (PFM-IPSM) is proposed, where turn-off mode analyzed to ensure zero-voltage switching (ZVS) over a wide operation range. Secondly, an analog-digital mixed synchronous rectification (SR) method based on turn-on delay is proposed to achieve efficient and reliable rectification in hybrid modulation modes. Further, a voltage controller combining a PI compensator with a second-order low-pass filter (2LPF) is designed to suppress resonant peak and enable a rapid dynamic response. Finally, a downscaled laboratory prototype is designed and developed, and the effectiveness of the proposed modulation and control strategy are thoroughly verified with experiments.
- 10 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. PP (21686777) , 1
Frequency Deviation Feedforward Control for Stability Enhancement and Frequency Support of PLL-Synchronized VSCs in Ultra-Weak Grids
Grid-connected voltage source converters face stability challenges under weak-grid conditions due to undesired coupling induced by the phase-locked loop (PLL). Increasing attention is also being given to power transfer and frequency support in controller damping design. This paper proposes a frequency deviation feedforward control method to mitigate PLL-induced couplings, while jointly considering alternating voltage and active power control for efficient power transfer. The proposed method not only enables stable operation at rated power under ultra-weak grid conditions, but also provides desired voltage regulation and inherent frequency support capability. Experimental results validate its effectiveness.
- 10 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. PP (21686777) , 1
Frequency Deviation Feedforward Control for Stability Enhancement and Frequency Support of PLL-Synchronized VSCs in Ultra-Weak Grids
Grid-connected voltage source converters face stability challenges under weak-grid conditions due to undesired coupling induced by the phase-locked loop (PLL). Increasing attention is also being given to power transfer and frequency support in controller damping design. This paper proposes a frequency deviation feedforward control method to mitigate PLL-induced couplings, while jointly considering alternating voltage and active power control for efficient power transfer. The proposed method not only enables stable operation at rated power under ultra-weak grid conditions, but also provides desired voltage regulation and inherent frequency support capability. Experimental results validate its effectiveness.
- 17 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 14 (3) , 3217-3229
Influence of Negative Gate Bias on Crosstalk Spike in SiC MOSFETs Half-Bridge Circuit
Due to the high switching speed and low threshold voltage (Vth) of SiC MOSFETs, a negative turn-off gate bias (Vgsoff) is widely used to avoid false turn-on. The crosstalk spike amplitude is primarily influenced by the ratio of gate-drain capacitance to gate-source capacitance (Cgd/Cgs ratio), dv/dt, and gate resistance. This paper firstly demonstrates that negative Vgsoff has two opposite effects on the crosstalk spike amplitude via its impacts on both dv/dt and the Cgd/Cgs ratio. On the one hand, a decrease in negative Vgsoff leads to a reduction in Vth, which results in an increased dv/dt and, consequently, a higher crosstalk spike amplitude. On the other hand, the decrease in negative Vgsoff contributes to a reduction in Cgd and an increase in Cgs, which results in a lower Cgd/Cgs ratio and, consequently, a reduced crosstalk spike amplitude. Experimental results validate the above analysis, showing that the dominant mechanism governing the variation in crosstalk spike amplitude depends on the gate structure of SiC MOSFETs as well as the operating conditions. The findings of this study can inform gate driver design and contribute to crosstalk spike mitigation strategies.
- 17 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 14 (3) , 3217-3229
Influence of Negative Gate Bias on Crosstalk Spike in SiC MOSFETs Half-Bridge Circuit
Due to the high switching speed and low threshold voltage (Vth) of SiC MOSFETs, a negative turn-off gate bias (Vgsoff) is widely used to avoid false turn-on. The crosstalk spike amplitude is primarily influenced by the ratio of gate-drain capacitance to gate-source capacitance (Cgd/Cgs ratio), dv/dt, and gate resistance. This paper firstly demonstrates that negative Vgsoff has two opposite effects on the crosstalk spike amplitude via its impacts on both dv/dt and the Cgd/Cgs ratio. On the one hand, a decrease in negative Vgsoff leads to a reduction in Vth, which results in an increased dv/dt and, consequently, a higher crosstalk spike amplitude. On the other hand, the decrease in negative Vgsoff contributes to a reduction in Cgd and an increase in Cgs, which results in a lower Cgd/Cgs ratio and, consequently, a reduced crosstalk spike amplitude. Experimental results validate the above analysis, showing that the dominant mechanism governing the variation in crosstalk spike amplitude depends on the gate structure of SiC MOSFETs as well as the operating conditions. The findings of this study can inform gate driver design and contribute to crosstalk spike mitigation strategies.
- 7 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 13 (2) , 2270-2284
Enhanced Operation of Grid-Following VSCs With Alternating-Voltage Control in Ultraweak Grids
Alternating-voltage control (AVC) is preferred in weak grids to enhance voltage stiffness and active power transfer capability for grid-following voltage source converters (VSCs) with a phase-locked loop. However, asymmetric d-q coupling of control loops is intensified with the AVC due to reactive currents, which leads to undesired interactions and thus risks weak-grid instability. To tackle stability challenge considering the AVC, a parameter tuning approach is first proposed to design the AVC according to the system rating. Based on that, the impact of the AVC on the intensified d-q coupling, stability region, and voltage dynamics are co-investigated. To enhance weak-grid operations, a stability enhancement control is further proposed to reversely compensate for the negative coupling effects induced by the phase-locked loop and AVC. The proposed scheme enables rated power operations of the VSC in ultra-weak grids. Experiments confirm the validity of the proposed method.
- 7 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 13 (2) , 2270-2284
Enhanced Operation of Grid-Following VSCs With Alternating-Voltage Control in Ultraweak Grids
Alternating-voltage control (AVC) is preferred in weak grids to enhance voltage stiffness and active power transfer capability for grid-following voltage source converters (VSCs) with a phase-locked loop. However, asymmetric d-q coupling of control loops is intensified with the AVC due to reactive currents, which leads to undesired interactions and thus risks weak-grid instability. To tackle stability challenge considering the AVC, a parameter tuning approach is first proposed to design the AVC according to the system rating. Based on that, the impact of the AVC on the intensified d-q coupling, stability region, and voltage dynamics are co-investigated. To enhance weak-grid operations, a stability enhancement control is further proposed to reversely compensate for the negative coupling effects induced by the phase-locked loop and AVC. The proposed scheme enables rated power operations of the VSC in ultra-weak grids. Experiments confirm the validity of the proposed method.
- 1 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (9) , 5233-5246
Enhancing Voltage Control Stability of Grid-Forming VSCs Under PWM Delays: A Study on Feedforward Damping Methods
Grid-forming converters have demonstrated their ability to enhance the operation of renewable energy resources by providing essential grid voltage and frequency support. However, control delays can cause the output impedance of the converter having a negative-resistance region, which potentially leads to high-frequency instability in voltage control. While passivity-based design is typically employed to shape the output impedance, aspects such as ease of implementation, robustness, and constraints related to LC-filter design have not been fully explored. To address this gap, this paper examines four feedforward damping methods with varying sampling rates, ultimately recommending sixteen-sampling capacitor voltage feedforward as the optimal approach. The effectiveness of proposed approach is validated through experiments, with grid current feedforward used as a benchmark for comparison.
- 1 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (9) , 5233-5246
Enhancing Voltage Control Stability of Grid-Forming VSCs Under PWM Delays: A Study on Feedforward Damping Methods
Grid-forming converters have demonstrated their ability to enhance the operation of renewable energy resources by providing essential grid voltage and frequency support. However, control delays can cause the output impedance of the converter having a negative-resistance region, which potentially leads to high-frequency instability in voltage control. While passivity-based design is typically employed to shape the output impedance, aspects such as ease of implementation, robustness, and constraints related to LC-filter design have not been fully explored. To address this gap, this paper examines four feedforward damping methods with varying sampling rates, ultimately recommending sixteen-sampling capacitor voltage feedforward as the optimal approach. The effectiveness of proposed approach is validated through experiments, with grid current feedforward used as a benchmark for comparison.
- 3 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (4) , 5319-5335
A Structure-Reconfigurable Isolated Bidirectional DC–DC Converter for Wide Voltage Gain Range Applications
In this article, a structure-reconfigurable isolated bidirectional dc–dc converter is proposed. This converter can be configured into four operation structures with different voltage gains, which is suitable for wide voltage gain range applications. Through unified phase-shift modulation, the bidirectional power transfer of different operation structures is able to be regulated, which has a simple parameter design and is easy to implement. In addition, the energy stored in the leakage inductance is absorbed and utilized with the operating state of the converter, thereby avoiding the voltage spikes caused by the leakage inductance. Also, the proposed converter achieves soft-switching operation of the switches, decreases the turns ratio of the transformer, and the power components (e.g., transformers, power switches, inductors, etc.) are partially enabled in different operation structures, thus implementing high conversion efficiency. The topology structure, operating principles, and design considerations are described in more depth, and an experimental prototype with 40–200 V on the low-voltage side and 400 V on the high-voltage side is established. The theoretical analysis and experimental results fully verify the correctness and effectiveness of the proposed converter.
- 3 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (4) , 5319-5335
A Structure-Reconfigurable Isolated Bidirectional DC–DC Converter for Wide Voltage Gain Range Applications
In this article, a structure-reconfigurable isolated bidirectional dc–dc converter is proposed. This converter can be configured into four operation structures with different voltage gains, which is suitable for wide voltage gain range applications. Through unified phase-shift modulation, the bidirectional power transfer of different operation structures is able to be regulated, which has a simple parameter design and is easy to implement. In addition, the energy stored in the leakage inductance is absorbed and utilized with the operating state of the converter, thereby avoiding the voltage spikes caused by the leakage inductance. Also, the proposed converter achieves soft-switching operation of the switches, decreases the turns ratio of the transformer, and the power components (e.g., transformers, power switches, inductors, etc.) are partially enabled in different operation structures, thus implementing high conversion efficiency. The topology structure, operating principles, and design considerations are described in more depth, and an experimental prototype with 40–200 V on the low-voltage side and 400 V on the high-voltage side is established. The theoretical analysis and experimental results fully verify the correctness and effectiveness of the proposed converter.
- 23 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (2) , 3077-3089
Surge Current Distribution in Paralleled SiC MOSFETs Under Third-Quadrant Operation
Surge current capability of paralleled silicon carbide (SiC) metal-oxide-semiconductor-field-effect transistors (mosfets) operating in both first and third quadrants is required in various applications. The surge current distribution in paralleled SiC mosfets during third quadrant operation needs further investigations. This article, therefore, establishes a source–drain resistance model of SiC mosfets under different gate bias in surge current range, which reveals the current “competition mechanism” between the MOS-channel path and the body diode path under surge current conditions. It then investigates the influence of device parameters discrepancy on surge current distribution in paralleled SiC mosfets. It finds out that the discrepancy of body diode parameters has significant influences on surge current distribution under different gate biases, while the parameter discrepancy of MOS-channel has much smaller impact on surge current distribution, even with positive gate bias. The conclusions of this article are supported with simulation and experimental results.
- 23 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (2) , 3077-3089
Surge Current Distribution in Paralleled SiC MOSFETs Under Third-Quadrant Operation
Surge current capability of paralleled silicon carbide (SiC) metal-oxide-semiconductor-field-effect transistors (mosfets) operating in both first and third quadrants is required in various applications. The surge current distribution in paralleled SiC mosfets during third quadrant operation needs further investigations. This article, therefore, establishes a source–drain resistance model of SiC mosfets under different gate bias in surge current range, which reveals the current “competition mechanism” between the MOS-channel path and the body diode path under surge current conditions. It then investigates the influence of device parameters discrepancy on surge current distribution in paralleled SiC mosfets. It finds out that the discrepancy of body diode parameters has significant influences on surge current distribution under different gate biases, while the parameter discrepancy of MOS-channel has much smaller impact on surge current distribution, even with positive gate bias. The conclusions of this article are supported with simulation and experimental results.