Pradeep Kr. Singh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pradeep Kr. Singh has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Pardeep Saini
Department of Mechanical Engineering, Sant Longowal Institute of Engineering and Technology, Longowal, India
10 shared publications Deepak Kumar
Department of Mechanical Engineering, Sant Longowal Institute of Engineering & Technology, Longowal-Sangrur, Punjab, India
6 shared publications- Rajesh Kumar
Precision Metrology Laboratory, Department of Mechanical Engineering, Sant Longowal Institute of Engineering and Technology, Longowal 148106, India
4 shared publications Bhuvnesh Bhardwaj
Department of Mechanical Engineering, Sant Longowal Institute of Engineering & Technology, Longowal, India
3 shared publicationsGulvir Singh
Department of Mechanical Engineering, Guru Nanak Dev Engineering College, Ludhiana, India
3 shared publications- Gulvir Singh
Department of Mechanical Engineering, Guru Nanak Dev Engineering College, Ludhiana, India
2 shared publications
Latest Publications
- 23 May 2023
- Published by Springer Nature in International Journal of Precision Engineering and Manufacturing
- Vol. 24 (8) , 1425-1433
Process Variable Optimization for Hot-Profiled Rolling of SAE 52100 Steel
- 23 May 2023
- Published by Springer Nature in International Journal of Precision Engineering and Manufacturing
- Vol. 24 (8) , 1425-1433
Process Variable Optimization for Hot-Profiled Rolling of SAE 52100 Steel
- 24 February 2023
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 32 (22) , 10128-10140
Modeling and Optimization of Process Parameters during Grooved Hot Rolling of SAE 1541 Steel
- 24 February 2023
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 32 (22) , 10128-10140
Modeling and Optimization of Process Parameters during Grooved Hot Rolling of SAE 1541 Steel
- 14 December 2022
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 124 (7-8) , 2463-2482
Effect of process parameters on roll separating force, driving torque, and end crop length during grooved hot rolling of SAE 1541 steel
- 14 December 2022
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 124 (7-8) , 2463-2482
Effect of process parameters on roll separating force, driving torque, and end crop length during grooved hot rolling of SAE 1541 steel
- 5 December 2022
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 38 (6) , 701-721
Modelling and Optimization of Process Parameters during Grooved Hot Rolling of SAE 1020 Steel
- 5 December 2022
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 38 (6) , 701-721
Modelling and Optimization of Process Parameters during Grooved Hot Rolling of SAE 1020 Steel
- 3 November 2022
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 53 (11) , 1450-1467
Experimental investigation on microstructure, mechanical and machining properties of Al‐4032/granite marble powder (GMP) composite produced through stir casting
The aluminium‐based composites (AMCs) are quite popular in several areas such as building, aerospace, automotive, marine, and aeronautical applications. Production industries deeply emphasize improvement in productivity and saving in cost. The composites fulfil these goals because of reinforcement materials. However, to bring in the composite to usage, it generally demands certain machining operation. Al‐4032 based 6 % (by weight) of granite marble powder (GMP) composite has been developed using stir casting set‐up. The fabricated composite has been examined for its machinability in milling operation. Cutting speed, feed rate, and depth of cut are the cutting parameters selected for the machining trials. The response surface methodology‐based desirability approach has been employed to obtain the best parameters for achieving the desired objectives. Experimental results demonstrate that the machined composite is considerably influenced by built‐up edge formation and interfacial bonding of particles. Minimum surface roughness (1.57 μm) and energy consumption (0.45 kWh) have been achieved at cutting speed 200 m/min, feed rate 197 mm/min, and depth of cut 1.5 mm.
- 3 November 2022
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 53 (11) , 1450-1467
Experimental investigation on microstructure, mechanical and machining properties of Al‐4032/granite marble powder (GMP) composite produced through stir casting
The aluminium‐based composites (AMCs) are quite popular in several areas such as building, aerospace, automotive, marine, and aeronautical applications. Production industries deeply emphasize improvement in productivity and saving in cost. The composites fulfil these goals because of reinforcement materials. However, to bring in the composite to usage, it generally demands certain machining operation. Al‐4032 based 6 % (by weight) of granite marble powder (GMP) composite has been developed using stir casting set‐up. The fabricated composite has been examined for its machinability in milling operation. Cutting speed, feed rate, and depth of cut are the cutting parameters selected for the machining trials. The response surface methodology‐based desirability approach has been employed to obtain the best parameters for achieving the desired objectives. Experimental results demonstrate that the machined composite is considerably influenced by built‐up edge formation and interfacial bonding of particles. Minimum surface roughness (1.57 μm) and energy consumption (0.45 kWh) have been achieved at cutting speed 200 m/min, feed rate 197 mm/min, and depth of cut 1.5 mm.
- 31 October 2022
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 8 (sup3) , 1346-1358
Optimization of process parameters inend milling of Al-4032 based metal matrix composite using TGRA
The Al-4032/SiC metal matrix composites are quite useful for low density, high corrosion resistance and improved mechanical properties. Usually, 2-8% SiC reinforcement has been researched for various industrial applications. Progressive increase in the reinforcement (SiC) composition in the Al-4032 matrix causes reduction in ductility and increase in brittleness. This paper presents the research on machining aspects of the Al-4032 with 3% SiC reinforcement. Work has been carried out to study the response of cutting speed (CS), feed rate (FR) and depth of cut (DOC) upon the material removal rate (MRR) and surface roughness (SR). The experiments have been done on the Computer Numeric Control (CNC) vertical machine centre. The machining (end milling) experiments have been conducted following the Taguchi's L-9 orthogonal array. For attempting the bi-objective optimisation (i.e. maximisation of MRR and minimisation of the surface roughness), Taguchi's grey relational analysis (TGRA) has been implemented using equal weightage to both the response parameters (W-1 = W-2 = 0.5). The model so obtained has been tested through ANOVA to discover the statistically significant elements. The CS (52.40%) appears to make the largest percentage contribution to the composite response, followed by the FR (26.60%), and the DOC (19.45%).
- 31 October 2022
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 8 (sup3) , 1346-1358
Optimization of process parameters inend milling of Al-4032 based metal matrix composite using TGRA
The Al-4032/SiC metal matrix composites are quite useful for low density, high corrosion resistance and improved mechanical properties. Usually, 2-8% SiC reinforcement has been researched for various industrial applications. Progressive increase in the reinforcement (SiC) composition in the Al-4032 matrix causes reduction in ductility and increase in brittleness. This paper presents the research on machining aspects of the Al-4032 with 3% SiC reinforcement. Work has been carried out to study the response of cutting speed (CS), feed rate (FR) and depth of cut (DOC) upon the material removal rate (MRR) and surface roughness (SR). The experiments have been done on the Computer Numeric Control (CNC) vertical machine centre. The machining (end milling) experiments have been conducted following the Taguchi's L-9 orthogonal array. For attempting the bi-objective optimisation (i.e. maximisation of MRR and minimisation of the surface roughness), Taguchi's grey relational analysis (TGRA) has been implemented using equal weightage to both the response parameters (W-1 = W-2 = 0.5). The model so obtained has been tested through ANOVA to discover the statistically significant elements. The CS (52.40%) appears to make the largest percentage contribution to the composite response, followed by the FR (26.60%), and the DOC (19.45%).
- 26 September 2022
- Published by Springer Nature in Sādhanā
- Vol. 47 (4) , 1-11
Parametric modeling and optimization of electrochemical machining of EN-31 alloy steel
- 26 September 2022
- Published by Springer Nature in Sādhanā
- Vol. 47 (4) , 1-11
Parametric modeling and optimization of electrochemical machining of EN-31 alloy steel
- 1 September 2022
- Published by IOP Publishing in Surface Topography: Metrology and Properties
- Vol. 10 (3) , 035029
Effect of machining parameters on surface roughness and energy consumption during end milling of stir cast Al-4032/6%SiC composite
The machining of metal matrix composite (MMC) presents a significant challenge to the industry. The hard and abrasive nature of the reinforcement causes rapid tool wear and high machining cost. In the present research, Al-4032 based composite with 6% of SiC by weight has been fabricated by stir casting setup. Optical micrographs (OM) and scanning electron microscopy (SEM) with energy dispersive x-ray analysis (EDXA) have been used for the examination of the composite morphological, surface topography, and fracture behavior. Mechanical characterization i.e., testing of the composite for tensile strength, micro-hardness and impact strength has also been carried out. Cutting speed, feed rate and depth of cut are the cutting parameters selected to examine the responses—surface finish and energy consumption. The response surface methodology (RSM) based desirability approach has been employed to obtain the best combination of parameters for achieving the desired objectives. The result established that the inclusion of SiC in the base matrix demonstrates improved mechanical properties and a better-machined surface with optimized machining parameters. Multi-response optimization shows that the minimum surface roughness (0.99 μ m) and minimum energy consumption (0.17 kWh) during end milling of Al-4032/6%SiC composite have been achieved at cutting speed 199 m min −1 , feed rate 500 mm min −1 and depth of cut 0.50 mm. The confirmation experiments show good agreement between the predicted and measured responses.
- 1 September 2022
- Published by IOP Publishing in Surface Topography: Metrology and Properties
- Vol. 10 (3) , 035029
Effect of machining parameters on surface roughness and energy consumption during end milling of stir cast Al-4032/6%SiC composite
The machining of metal matrix composite (MMC) presents a significant challenge to the industry. The hard and abrasive nature of the reinforcement causes rapid tool wear and high machining cost. In the present research, Al-4032 based composite with 6% of SiC by weight has been fabricated by stir casting setup. Optical micrographs (OM) and scanning electron microscopy (SEM) with energy dispersive x-ray analysis (EDXA) have been used for the examination of the composite morphological, surface topography, and fracture behavior. Mechanical characterization i.e., testing of the composite for tensile strength, micro-hardness and impact strength has also been carried out. Cutting speed, feed rate and depth of cut are the cutting parameters selected to examine the responses—surface finish and energy consumption. The response surface methodology (RSM) based desirability approach has been employed to obtain the best combination of parameters for achieving the desired objectives. The result established that the inclusion of SiC in the base matrix demonstrates improved mechanical properties and a better-machined surface with optimized machining parameters. Multi-response optimization shows that the minimum surface roughness (0.99 μ m) and minimum energy consumption (0.17 kWh) during end milling of Al-4032/6%SiC composite have been achieved at cutting speed 199 m min −1 , feed rate 500 mm min −1 and depth of cut 0.50 mm. The confirmation experiments show good agreement between the predicted and measured responses.
- 30 August 2022
- Published by Springer Nature
- p. 77-90
Recent Trends in the Amelioration and Prediction of Surface Roughness in Turning Process: A Bibliometric Analysis
- 30 August 2022
- Published by Springer Nature
- p. 77-90
Recent Trends in the Amelioration and Prediction of Surface Roughness in Turning Process: A Bibliometric Analysis
- 25 August 2022
- Published by Springer Nature in Silicon
- Vol. 15 (2) , 943-962
Microstructural, Mechanical and Machining Studies of Al-4032 Alloy Based Hybrid Composite
- 25 August 2022
- Published by Springer Nature in Silicon
- Vol. 15 (2) , 943-962
Microstructural, Mechanical and Machining Studies of Al-4032 Alloy Based Hybrid Composite