Mohammad Nawaz Khan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Mohammad Nawaz Khan has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Owais Qidwai
Department of Mechanical Engineering, Jamia Millia Islamia, New Delhi, India
2 shared publications Munawwar Nawab Karimi
Mechanical Engineering Department, Jamia Millia Islamia, New Delhi, India
2 shared publicationsSaqib Ali
Department of Mechanical Engineering, Integral University, Lucknow, India
2 shared publicationsShahnwaz Alam
Department of Mechanical Engineering, Integral University, Lucknow, India
2 shared publicationsAbdullah Yusuf Usmani
Mechanical Engineering Department, Aligarh Muslim University, New Delhi, India
1 shared publication- Abhishek Dwivedi
Integral University
1 shared publication
Latest Publications
- 17 July 2026
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 12 (5) , 1641
Analyzing the impact of plate integration on the thermal and flow performance of microchannel heat sinks
This study investigates the thermal and fluid-flow performance of three microchannel heat-sink configurations: simple rectangular (plain), triangular edge-plate, and zigzag edge-plate. This study aims to cool high-power-density processors, specifically the Intel Core i5-7600K. The processor has a thermal design power of 91 W and a compact die size of about 100 mm². These conditions create significant thermal challenges, requiring efficient and compact cooling strategies. The study uses numerical simulations across a range of Reynolds numbers. It evaluates key performance parameters such as the Nusselt number and the convective heat transfer coefficient. Pressure drop and the thermal performance factor are also analyzed. The results indicate that the plainmicrochannel has the lowest pressure drop but the poorest thermal performance due to limited boundary-layer disturbance. The triangular edge-plate configuration enhances heat transfer through secondary flow generation, achieving a moderate thermal performance factor of 1.15. In contrast, the zigzag edge-plate design delivers the highest thermal performance factor of 1.20, with heat transfer coefficients increasing by 32.01%–38.21% relative to the plain configuration. Although this improvement incurs a pressure-drop penalty, the zigzag channel still consistently outperforms the other designs, achieving up to 11.77% better performance than that of the triangular geometry at low Reynolds numbers. This study presents a novel geometric approach to MCHS optimization through internal plate integration, offering valuable insights into developing compact, high-efficiency thermal management solutions for next-generationelectronic systems.
- 17 July 2026
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 12 (5) , 1641
Analyzing the impact of plate integration on the thermal and flow performance of microchannel heat sinks
This study investigates the thermal and fluid-flow performance of three microchannel heat-sink configurations: simple rectangular (plain), triangular edge-plate, and zigzag edge-plate. This study aims to cool high-power-density processors, specifically the Intel Core i5-7600K. The processor has a thermal design power of 91 W and a compact die size of about 100 mm². These conditions create significant thermal challenges, requiring efficient and compact cooling strategies. The study uses numerical simulations across a range of Reynolds numbers. It evaluates key performance parameters such as the Nusselt number and the convective heat transfer coefficient. Pressure drop and the thermal performance factor are also analyzed. The results indicate that the plainmicrochannel has the lowest pressure drop but the poorest thermal performance due to limited boundary-layer disturbance. The triangular edge-plate configuration enhances heat transfer through secondary flow generation, achieving a moderate thermal performance factor of 1.15. In contrast, the zigzag edge-plate design delivers the highest thermal performance factor of 1.20, with heat transfer coefficients increasing by 32.01%–38.21% relative to the plain configuration. Although this improvement incurs a pressure-drop penalty, the zigzag channel still consistently outperforms the other designs, achieving up to 11.77% better performance than that of the triangular geometry at low Reynolds numbers. This study presents a novel geometric approach to MCHS optimization through internal plate integration, offering valuable insights into developing compact, high-efficiency thermal management solutions for next-generationelectronic systems.
- Open Access
- 24 June 2025
- Published by Manarah in Frontiers in Engineering and Built Environment
- Vol. 5 (ahead-of-p)
Optimization of square-based tapered twisted hollow tube using CCD approach in RSM
This research investigates the structural performance and design optimization of square-based tapered hollow tubes, which are increasingly utilized in various industrial applications. A finite element model of a thin-walled square tube is developed to analyze critical design parameters, including taper angle, twist angle and wall thickness. Key performance outcomes such as buckling load, strain energy, stress and specific strain energy are evaluated. The study employs a face-centered central composite design (CCD) approach integrated with response surface methodology (RSM) to enhance the accuracy of predictions. Interactions between design parameters are visualized using 3D surface plots to identify optimal conditions. The optimized design parameters were determined as taper angle = 8.714°, wall thickness = 0.643 mm and twist angle = 33.460°. These configurations resulted in a buckling load of 27,262 kN, strain energy of 1.262 x 10−11 J, stress of 233.449 Pa and specific strain energy of 89.817 x 10−11 J/kg. The findings provide valuable insights into the advantages of tapered hollow tube designs and demonstrate the significant impact of design parameters on performance outcomes. The results contribute significantly to advancing the design and application of tapered hollow tubes across multiple engineering domains, offering valuable references for both industry professionals and researchers working with tubular structures.
- 24 June 2025
- Published by Manarah in Frontiers in Engineering and Built Environment
- Vol. 5 (ahead-of-p)
Open AccessOptimization of square-based tapered twisted hollow tube using CCD approach in RSM
This research investigates the structural performance and design optimization of square-based tapered hollow tubes, which are increasingly utilized in various industrial applications. A finite element model of a thin-walled square tube is developed to analyze critical design parameters, including taper angle, twist angle and wall thickness. Key performance outcomes such as buckling load, strain energy, stress and specific strain energy are evaluated. The study employs a face-centered central composite design (CCD) approach integrated with response surface methodology (RSM) to enhance the accuracy of predictions. Interactions between design parameters are visualized using 3D surface plots to identify optimal conditions. The optimized design parameters were determined as taper angle = 8.714°, wall thickness = 0.643 mm and twist angle = 33.460°. These configurations resulted in a buckling load of 27,262 kN, strain energy of 1.262 x 10−11 J, stress of 233.449 Pa and specific strain energy of 89.817 x 10−11 J/kg. The findings provide valuable insights into the advantages of tapered hollow tube designs and demonstrate the significant impact of design parameters on performance outcomes. The results contribute significantly to advancing the design and application of tapered hollow tubes across multiple engineering domains, offering valuable references for both industry professionals and researchers working with tubular structures.
- 24 April 2024
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 149 (11) , 5569-5583
Effect of cylindrical ribs location in a fan-shaped cavity on thermo-hydraulic performance of a microchannel heatsink
- 24 April 2024
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 149 (11) , 5569-5583
Effect of cylindrical ribs location in a fan-shaped cavity on thermo-hydraulic performance of a microchannel heatsink
- 13 February 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 240 (1) , 178-188
Effect of cylindrical ribs arrangement in the cavity region of the microchannel heatsink with a fan-shaped cavity
Fan-shaped cavity microchannel heatsink with the combination of ribs is an effective configuration to dissipate large amounts of heat at the expense of lower pressure drop. However, the most effective location of circular ribs within a fan-shaped cavity which enhances the performance of a microchannel heat sink is still unknown. In this work, seven different structural units based on the ribs location in the cavity region such as ribs at the front of the cavities (RFC), at the back (RBC), at the centre (RCC), at the front and back (RFBC), at the left (RLC), at the right (RRC) and at the left and right (RLRC) are analysed for the range of Reynolds number from 100 to 500 and the results are compared with the microchannel with fan-shaped cavity only (MHFC) and plain rectangular microchannel heat sink on the basis of Nusselt number, interface temperature, pressure drop and performance factor. A notable finding of this study is identifying a rib as a disruption leading to the splitting of flow into two streams towards the arcuate region of the cavity and results in the enhanced mixing of the mainstream flow and the trapped fluid in the arcuate region. The maximum Nusselt number is exhibited by the RFBC with an increment of about 19% relative to the conventional centre location of the ribs in the cavity (RCC). At a lower Reynolds number, the Nusselt number of RLRC is lower than RCC and RBC however at Re > 300, the Nusselt number of RLRC is nearly equal to RCC whereas the minimum Nusselt number is associated with RRC and RLC among the microchannels having cavities and ribs. Along with the highest Nusselt number the largest value of pressure drop is also associated with RFBC whereas minimum pressure drop is accompanied by RRC and RLC.
- 13 February 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 240 (1) , 178-188
Effect of cylindrical ribs arrangement in the cavity region of the microchannel heatsink with a fan-shaped cavity
Fan-shaped cavity microchannel heatsink with the combination of ribs is an effective configuration to dissipate large amounts of heat at the expense of lower pressure drop. However, the most effective location of circular ribs within a fan-shaped cavity which enhances the performance of a microchannel heat sink is still unknown. In this work, seven different structural units based on the ribs location in the cavity region such as ribs at the front of the cavities (RFC), at the back (RBC), at the centre (RCC), at the front and back (RFBC), at the left (RLC), at the right (RRC) and at the left and right (RLRC) are analysed for the range of Reynolds number from 100 to 500 and the results are compared with the microchannel with fan-shaped cavity only (MHFC) and plain rectangular microchannel heat sink on the basis of Nusselt number, interface temperature, pressure drop and performance factor. A notable finding of this study is identifying a rib as a disruption leading to the splitting of flow into two streams towards the arcuate region of the cavity and results in the enhanced mixing of the mainstream flow and the trapped fluid in the arcuate region. The maximum Nusselt number is exhibited by the RFBC with an increment of about 19% relative to the conventional centre location of the ribs in the cavity (RCC). At a lower Reynolds number, the Nusselt number of RLRC is lower than RCC and RBC however at Re > 300, the Nusselt number of RLRC is nearly equal to RCC whereas the minimum Nusselt number is associated with RRC and RLC among the microchannels having cavities and ribs. Along with the highest Nusselt number the largest value of pressure drop is also associated with RFBC whereas minimum pressure drop is accompanied by RRC and RLC.
- 27 December 2023
- Published by Taylor & Francis in Numerical Heat Transfer, Part A: Applications
- Vol. 86 (9) , 2806-2825
Heat transfer enhancement in multijet micropin fin heat sink
- 27 December 2023
- Published by Taylor & Francis in Numerical Heat Transfer, Part A: Applications
- Vol. 86 (9) , 2806-2825
Heat transfer enhancement in multijet micropin fin heat sink
- 5 June 2023
- Published by Taylor & Francis in Numerical Heat Transfer, Part A: Applications
- Vol. 85 (13) , 2128-2144
A comprehensive analysis of a rectangular microchannel heat sink furnished with a circular perforated cylindrical pinfin
- 5 June 2023
- Published by Taylor & Francis in Numerical Heat Transfer, Part A: Applications
- Vol. 85 (13) , 2128-2144
A comprehensive analysis of a rectangular microchannel heat sink furnished with a circular perforated cylindrical pinfin
- 3 August 2022
- Published by Taylor & Francis in Numerical Heat Transfer, Part A: Applications
- Vol. 83 (6) , 594-608
Effect of circular perforated pin fin on heat transfer and fluid flow characteristics of rectangular microchannel heat sink
In the present work, a numerical analysis has been performed to observe the heat transfer and fluid flow characteristics of the perforated pin fin microchannel heat sink. Six equidistant cylindrical pin fins with circular perforation at the center are entrenched at the base wall of the channel. This perforated pin fin can act as an extended surface and enhanced the heat transfer whereas the circular perforation may reduces the pressure drop and also influence the flow characteristics. The analysis has been done for the single-phase flow with Reynolds number ranges between 150 to 350 and the nondimensional diameter(α) of circular perforations considered in this study are 0.33, 0.5, 0.67 and 0.83. It is observed that the Nusslet number improves with the smallest perforation that is α = 0.33 and decreases as the diameter of perforation increases however the maximum value of overall thermal performance is associated with the perforation size of 0.5.
- 3 August 2022
- Published by Taylor & Francis in Numerical Heat Transfer, Part A: Applications
- Vol. 83 (6) , 594-608
Effect of circular perforated pin fin on heat transfer and fluid flow characteristics of rectangular microchannel heat sink
In the present work, a numerical analysis has been performed to observe the heat transfer and fluid flow characteristics of the perforated pin fin microchannel heat sink. Six equidistant cylindrical pin fins with circular perforation at the center are entrenched at the base wall of the channel. This perforated pin fin can act as an extended surface and enhanced the heat transfer whereas the circular perforation may reduces the pressure drop and also influence the flow characteristics. The analysis has been done for the single-phase flow with Reynolds number ranges between 150 to 350 and the nondimensional diameter(α) of circular perforations considered in this study are 0.33, 0.5, 0.67 and 0.83. It is observed that the Nusslet number improves with the smallest perforation that is α = 0.33 and decreases as the diameter of perforation increases however the maximum value of overall thermal performance is associated with the perforation size of 0.5.
- 4 February 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 235 (4) , 758-767
Analysis of heat transfer enhancement in microchannel by varying the height of pin fins at upstream and downstream region
In this study, a numerical analysis of a microchannel with the different configuration of varying height of pin fins entrenched at the bottom of the channel base wall has been carried out. Five different configurations of pin fins arrangement which are considered in this study are, Case 1(Full length fins in complete microchannel), Case 2(Full length fins at the upstream), Case 3(Full length fins at the downstream), Case 4(Full length fin at the center of microchannel), Case 5(Full length fins at the inlet and exit of microchannel) and the results of these five cases are compared with the plain rectangular microchannel. In this investigation, deionized ultra-filtered water is used and Reynold’s number is ranging from 150 to 350. Results reveals that the highest Nusselt number is achieved by case 2 at a lesser value of Reynold’s number while by case 5 at higher Reynold’s number and the lowest pressure drop is occurring in case 4. The overall thermal performance of case 2 beats the corresponding cases.
- 4 February 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 235 (4) , 758-767
Analysis of heat transfer enhancement in microchannel by varying the height of pin fins at upstream and downstream region
In this study, a numerical analysis of a microchannel with the different configuration of varying height of pin fins entrenched at the bottom of the channel base wall has been carried out. Five different configurations of pin fins arrangement which are considered in this study are, Case 1(Full length fins in complete microchannel), Case 2(Full length fins at the upstream), Case 3(Full length fins at the downstream), Case 4(Full length fin at the center of microchannel), Case 5(Full length fins at the inlet and exit of microchannel) and the results of these five cases are compared with the plain rectangular microchannel. In this investigation, deionized ultra-filtered water is used and Reynold’s number is ranging from 150 to 350. Results reveals that the highest Nusselt number is achieved by case 2 at a lesser value of Reynold’s number while by case 5 at higher Reynold’s number and the lowest pressure drop is occurring in case 4. The overall thermal performance of case 2 beats the corresponding cases.
- 11 October 2017
- Published by Springer Nature
- p. 83-94
Effect of Air Conditioning on Global Warming and Human Health
- 11 October 2017
- Published by Springer Nature
- p. 83-94
Effect of Air Conditioning on Global Warming and Human Health