Milan Meruňka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Milan Meruňka has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Rudolf Hela
Brno University of Technology
3 shared publications - Lucia Ťažká
Brno University of Technology
2 shared publications - Martin Ťažký
Brno University of Technology, Faculty of Civil Engineering, Institute of Technology of Building Materials and Components, Veveří 331/95, 602 00 Brno, Czech Republic
2 shared publications - Lenka Bodnárová
Brno University of Technology
1 shared publication - Petr Hlaváček
Institute of Geonics of the Czech Academy of Sciences
1 shared publication
Latest Publications
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2780 (1) , 020004
Effect of the combination of Blast-furnace finely ground granulated slag and inert admixtures on physical-mechanical parameters
The use of Ground Granulated Blast-furnace Slag (GGBS) in concrete mixes has become commonplace in modern concrete technology, for reasons including its positive influence on selected parameters of the concrete mix in its fresh and hardened state. However, increasing pressure on the production of blended cements, along with economic difficulties due to grinding or the closure of blast furnaces and the associated longer transport distances, are resulting in lower availability and increased prices for this raw material. It is accordingly necessary to look for other possible solutions or alternatives to optimise the composition of the concrete mix, as this would make it possible to reduce not only the amount of binder but also the proportion of GGBS in the mix while maintaining the technical parameters. One possible solution could be to combine GGBS with an inert admixture in an optimal ratio to ensure maximum compactness of the cement matrix.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2780 (1) , 020004
Open AccessEffect of the combination of Blast-furnace finely ground granulated slag and inert admixtures on physical-mechanical parameters
The use of Ground Granulated Blast-furnace Slag (GGBS) in concrete mixes has become commonplace in modern concrete technology, for reasons including its positive influence on selected parameters of the concrete mix in its fresh and hardened state. However, increasing pressure on the production of blended cements, along with economic difficulties due to grinding or the closure of blast furnaces and the associated longer transport distances, are resulting in lower availability and increased prices for this raw material. It is accordingly necessary to look for other possible solutions or alternatives to optimise the composition of the concrete mix, as this would make it possible to reduce not only the amount of binder but also the proportion of GGBS in the mix while maintaining the technical parameters. One possible solution could be to combine GGBS with an inert admixture in an optimal ratio to ensure maximum compactness of the cement matrix.
- 11 October 2021
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 325, 125-130
The Influence of Shrinkage-Reducing Additives on Volume Changes and Mechanical Parameters of a Concrete Composite
Cement hydration is a process during which the setting and hardening of cement stone occur. This process is linked to the significant development of heat of hydration, which is accompanied by volume changes of concrete composite (i.e. shrinkage). Due to this, cracks in a concrete composite can arise and influence not only its durability, mechanical parameters or aesthetics but, in the case of water-tight concretes (e.g. the so-called white boxes), also its function. The extent of volume changes can be influenced not only by the composite structure itself or the selection and amount of cement but also by using suitable active additions, e.g. high-temperature fly ash. As a result, it is possible to reduce the amount of cement required while maintaining identical mechanical parameters of concrete and, at the same time, slow down the progress of heat of hydration during cement hydration. One of the other options to eliminate volume changes in concrete composites is the use of shrinkage-reducing additives (SRA). This article focuses on the SRA influence on volume changes of high-performance concretes and their impact on the development of hydration temperatures and mechanical parameters of composites.
- 11 October 2021
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 325, 125-130
The Influence of Shrinkage-Reducing Additives on Volume Changes and Mechanical Parameters of a Concrete Composite
Cement hydration is a process during which the setting and hardening of cement stone occur. This process is linked to the significant development of heat of hydration, which is accompanied by volume changes of concrete composite (i.e. shrinkage). Due to this, cracks in a concrete composite can arise and influence not only its durability, mechanical parameters or aesthetics but, in the case of water-tight concretes (e.g. the so-called white boxes), also its function. The extent of volume changes can be influenced not only by the composite structure itself or the selection and amount of cement but also by using suitable active additions, e.g. high-temperature fly ash. As a result, it is possible to reduce the amount of cement required while maintaining identical mechanical parameters of concrete and, at the same time, slow down the progress of heat of hydration during cement hydration. One of the other options to eliminate volume changes in concrete composites is the use of shrinkage-reducing additives (SRA). This article focuses on the SRA influence on volume changes of high-performance concretes and their impact on the development of hydration temperatures and mechanical parameters of composites.
- Open Access
The Effect of the Composition of a Concrete Mixture on Its Volume Changes
The presented research aims to clarify the specific effect of the individual components of concrete with Portland cement CEM I 42.5 R on the volume changes of concrete. The effect of the filler component was evaluated from the point of view of the composition and type of aggregate (crushed versus mined) and from the point of view of the mineralogical composition of the aggregate. Concrete formulas with a maximum aggregate grain size of 16 and 22 mm were assessed. The effect of the binder component on the shrinkage of the concrete was monitored on the concrete mixtures produced using the same aggregate and maintaining the same strength class of concrete, C 45/55. The effect of the addition of finely ground limestone, finely ground granulated blast furnace slag and coal high-temperature fly ash was monitored. It was found that the maximum aggregate grain and the type of grading curve do not have a significant effect on the volume changes of concrete. Concretes with mined aggregates showed lower shrinkage than concretes with crushed aggregates. The most significant is the effect of the type of aggregate on the volume changes in the first 24 h. Mineral additives have a positive effect on the elimination of the volume changes of concrete, while the addition of high-temperature fly ash proved to be the most suitable.
Open AccessThe Effect of the Composition of a Concrete Mixture on Its Volume Changes
The presented research aims to clarify the specific effect of the individual components of concrete with Portland cement CEM I 42.5 R on the volume changes of concrete. The effect of the filler component was evaluated from the point of view of the composition and type of aggregate (crushed versus mined) and from the point of view of the mineralogical composition of the aggregate. Concrete formulas with a maximum aggregate grain size of 16 and 22 mm were assessed. The effect of the binder component on the shrinkage of the concrete was monitored on the concrete mixtures produced using the same aggregate and maintaining the same strength class of concrete, C 45/55. The effect of the addition of finely ground limestone, finely ground granulated blast furnace slag and coal high-temperature fly ash was monitored. It was found that the maximum aggregate grain and the type of grading curve do not have a significant effect on the volume changes of concrete. Concretes with mined aggregates showed lower shrinkage than concretes with crushed aggregates. The most significant is the effect of the type of aggregate on the volume changes in the first 24 h. Mineral additives have a positive effect on the elimination of the volume changes of concrete, while the addition of high-temperature fly ash proved to be the most suitable.