Jongju Kim
Jongju Kim has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- June Ho Park
Department of Electrical Engineering, Pusan National University, Busan, South Korea
5 shared publications Sungshin Kim
Department of Electrical Engineering, Pusan National University, Busan, South Korea
2 shared publications- Heungseok Lee
Department of Electrical Engineering, Pusan National University, Busan, Korea
1 shared publication - Heungseok Lee
Department of Electrical Engineering, Myongji University, Yongin 17058, Republic of Korea
1 shared publication - Heungseok Lee
Department of Electrical and Computer Engineering, Pusan National University, Busan 46241, Republic of Korea
1 shared publication Sang-Hwa Chung
Department of Information Convergence Engineering, Pusan National University, Busan, South Korea
1 shared publication
Latest Publications
- Open Access
- 1 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 79264-79279
Out-of-Step Protection for a Synchronous Generator via Energy Function-Based Stability Assessment Using a Single Local Speed Measurement
This study proposes a scheme for determining the loss of synchronism in synchronous generators based on the direct method, utilizing a single local speed measurement within a generator system. By employing individual machine energy functions, this approach establishes a theoretical foundation for determining synchronization thresholds from the perspective of a single generator. Building on this foundation, clear criteria are suggested for determining whether a generator remains stable. The feasibility of the proposed method is verified through its application to synchronous generators, considering a comprehensive setup environment for implementing the proposed algorithm. Case studies are conducted using time-domain simulations in MATLAB/Simulink on the IEEE 39-bus system with varying system inertia and the IEEE 118-bus system. These case studies evaluate the robustness of the proposed criteria and algorithm in determining out-of-step conditions from an energy conversion perspective, analyzing variations in system inertia, control system parameters, power system scale, and fault scenarios across benchmark systems. Furthermore, the performance of the proposed protection scheme is compared with previous studies, highlighting its advantages. By interpreting the loss of synchronism phenomenon using only local measurements from existing systems, the proposed scheme demonstrates robustness against changes in the characteristics of the connected power system. It also simplifies the detailed settings required for effective operation of the protection scheme.
- 1 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 79264-79279
Open AccessOut-of-Step Protection for a Synchronous Generator via Energy Function-Based Stability Assessment Using a Single Local Speed Measurement
This study proposes a scheme for determining the loss of synchronism in synchronous generators based on the direct method, utilizing a single local speed measurement within a generator system. By employing individual machine energy functions, this approach establishes a theoretical foundation for determining synchronization thresholds from the perspective of a single generator. Building on this foundation, clear criteria are suggested for determining whether a generator remains stable. The feasibility of the proposed method is verified through its application to synchronous generators, considering a comprehensive setup environment for implementing the proposed algorithm. Case studies are conducted using time-domain simulations in MATLAB/Simulink on the IEEE 39-bus system with varying system inertia and the IEEE 118-bus system. These case studies evaluate the robustness of the proposed criteria and algorithm in determining out-of-step conditions from an energy conversion perspective, analyzing variations in system inertia, control system parameters, power system scale, and fault scenarios across benchmark systems. Furthermore, the performance of the proposed protection scheme is compared with previous studies, highlighting its advantages. By interpreting the loss of synchronism phenomenon using only local measurements from existing systems, the proposed scheme demonstrates robustness against changes in the characteristics of the connected power system. It also simplifies the detailed settings required for effective operation of the protection scheme.
- Open Access
- 1 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 47748-47762
Energy-Based Reinterpretation of Equal Area Criterion for Generator Instability Assessment via Local Rotational Speed and Voltage Frequency Measurements
- 1 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 47748-47762
Open AccessEnergy-Based Reinterpretation of Equal Area Criterion for Generator Instability Assessment via Local Rotational Speed and Voltage Frequency Measurements
- Open Access
Power System Transient Stability Assessment Using Convolutional Neural Network and Saliency Map
This study proposes a model for transient stability assessment, which is a convolutional neural network model combined with a saliency map (S–CNN model). The convolutional neural network model is trained on dynamic data acquired through the data measurement devices of a power system. Applying the saliency map to the acquired dynamic data visually highlights the critical aspects of transient stability assessment. This reduces data training time by eliminating unnecessary aspects during the convolutional neural network model training, thus improving training efficiency. As a result, the proposed model can achieve high performance in transient stability assessment. The dynamic data are acquired by configuring benchmark models, IEEE 39 and 118 bus systems, through MATLAB/Simulink and performing time-domain simulations. Based on the acquired dynamic data, the performance of the proposed model is verified through a confusion matrix. Furthermore, an analysis of the effects of noise interference on the performance is conducted.
Open AccessPower System Transient Stability Assessment Using Convolutional Neural Network and Saliency Map
This study proposes a model for transient stability assessment, which is a convolutional neural network model combined with a saliency map (S–CNN model). The convolutional neural network model is trained on dynamic data acquired through the data measurement devices of a power system. Applying the saliency map to the acquired dynamic data visually highlights the critical aspects of transient stability assessment. This reduces data training time by eliminating unnecessary aspects during the convolutional neural network model training, thus improving training efficiency. As a result, the proposed model can achieve high performance in transient stability assessment. The dynamic data are acquired by configuring benchmark models, IEEE 39 and 118 bus systems, through MATLAB/Simulink and performing time-domain simulations. Based on the acquired dynamic data, the performance of the proposed model is verified through a confusion matrix. Furthermore, an analysis of the effects of noise interference on the performance is conducted.
- Open Access
- 27 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 116622-116637
Transient Stability Assessment Using Deep Transfer Learning
This study proposes a deep transfer learning method using a deep convolutional neural network pre-trained with ImageNet for transient stability assessment. The procedure of deep transfer learning, incorporating the role and considerations of the transient stability assessment system, is suggested. The transient assessment system learns the relationship between the severity of disturbances and transient stability in the power system through the proposed training method. The severity of a disturbance based on the physical causal relationship of the angle stability is proposed to train and implement the transient stability assessment model. The power system state variables obtained from the phasor measurement unit are converted into the feature map described by the severity of a disturbance, enabling the training of transient stability characteristics of the power system to the deep convolutional neural network. The training dataset is constructed using the time-domain simulation on IEEE 39 and IEEE 118-bus benchmark power system models configured in MATLAB/Simulink. As a result of deep transfer learning, which involves training with freezing some of the convolutional layers of the pre-trained deep network, the most suitable model for transient stability assessment is selected among the pre-trained deep networks. The effectiveness of the proposed method is compared with other approaches using the confusion matrix, and the robustness against noise interference is also investigated.
- 27 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 116622-116637
Open AccessTransient Stability Assessment Using Deep Transfer Learning
This study proposes a deep transfer learning method using a deep convolutional neural network pre-trained with ImageNet for transient stability assessment. The procedure of deep transfer learning, incorporating the role and considerations of the transient stability assessment system, is suggested. The transient assessment system learns the relationship between the severity of disturbances and transient stability in the power system through the proposed training method. The severity of a disturbance based on the physical causal relationship of the angle stability is proposed to train and implement the transient stability assessment model. The power system state variables obtained from the phasor measurement unit are converted into the feature map described by the severity of a disturbance, enabling the training of transient stability characteristics of the power system to the deep convolutional neural network. The training dataset is constructed using the time-domain simulation on IEEE 39 and IEEE 118-bus benchmark power system models configured in MATLAB/Simulink. As a result of deep transfer learning, which involves training with freezing some of the convolutional layers of the pre-trained deep network, the most suitable model for transient stability assessment is selected among the pre-trained deep networks. The effectiveness of the proposed method is compared with other approaches using the confusion matrix, and the robustness against noise interference is also investigated.
- 7 February 2023
- Published by Springer Nature in Journal of Electrical Engineering & Technology
- Vol. 18 (4) , 2723-2735
Real-Time Power System Transient Stability Prediction Using Convolutional Layer and Long Short-Term Memory
- 7 February 2023
- Published by Springer Nature in Journal of Electrical Engineering & Technology
- Vol. 18 (4) , 2723-2735
Real-Time Power System Transient Stability Prediction Using Convolutional Layer and Long Short-Term Memory
- 19 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Systems
- Vol. 38 (1) , 302-315
A Novel Control Strategy to Improve Stability and Performance of a Synchronous Generator Using Jacobian Gain Control
This paper proposes a novel control strategy to improve the stability and performance of the linear feedback control (LC) by alleviating the nonlinearity of a synchronous generator (SG). This control strategy, Jacobian gain control (JGC), uses the Jacobian function (JF), which is the sensitivity between the power imbalance in an electrical power system (EPS) and the state variables of SGs, for control. The JFs composed of a combination of state variables of an SG were established by the Jacobian reflecting physical characteristics of SG control. An integrated controller, JGC, for the SG was constructed by applying the JFs to the models of the governor (GOV), excitation system (EX), and power system stabilizer (PSS), respectively. The effects of JGC were identified by frequency response analysis of a single machine infinite bus (SMIB) model. The comprehensive control performance and stability of JGC were verified through various case-by-case time-domain simulations on two-area and IEEE 39-bus system configured by MATLAB/Simulink.
- 19 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Systems
- Vol. 38 (1) , 302-315
A Novel Control Strategy to Improve Stability and Performance of a Synchronous Generator Using Jacobian Gain Control
This paper proposes a novel control strategy to improve the stability and performance of the linear feedback control (LC) by alleviating the nonlinearity of a synchronous generator (SG). This control strategy, Jacobian gain control (JGC), uses the Jacobian function (JF), which is the sensitivity between the power imbalance in an electrical power system (EPS) and the state variables of SGs, for control. The JFs composed of a combination of state variables of an SG were established by the Jacobian reflecting physical characteristics of SG control. An integrated controller, JGC, for the SG was constructed by applying the JFs to the models of the governor (GOV), excitation system (EX), and power system stabilizer (PSS), respectively. The effects of JGC were identified by frequency response analysis of a single machine infinite bus (SMIB) model. The comprehensive control performance and stability of JGC were verified through various case-by-case time-domain simulations on two-area and IEEE 39-bus system configured by MATLAB/Simulink.
- Open Access
A Novel Structure of a Power System Stabilizer for Microgrids
This paper proposes a novel structure of a power system stabilizer (PSS) to improve the stability of synchronous generators (SGs) in microgrids. Microgrids are relatively vulnerable in terms of stability due to their small size and low inertia. The rotational inertia and voltage support of SGs are highly suitable for getting over the vulnerabilities of microgrids, but there exist weaknesses in low-frequency oscillations (LFOs) and limitations of synchronization due to electromagnetic characteristics. Therefore, we study how to accommodate the features of microgrids in the PSS of SGs and further enhance present advantages. The PSS proposed in this paper not only damps out LFOs by conventional lead-lag compensation but also provides additional damping torque according to the magnitude of the perturbation using a synchronous impedance characteristic (SIC). The proposed Lyapunov energy-function-based control strategy can also increase the synchronizing power of the SG to improve transient stability. For performance verification, we use parameters obtained by the particle swarm optimization (PSO) algorithm to compare the existing PSS with the proposed one and analyze them. The effect of the proposed micro-power system stabilizer (μPSS) is analyzed through frequency response analysis, and finally, small-signal stability analysis and the performance of transient stability are verified by time-domain simulation (TDS) on MATLAB/Simulink.
Open AccessA Novel Structure of a Power System Stabilizer for Microgrids
This paper proposes a novel structure of a power system stabilizer (PSS) to improve the stability of synchronous generators (SGs) in microgrids. Microgrids are relatively vulnerable in terms of stability due to their small size and low inertia. The rotational inertia and voltage support of SGs are highly suitable for getting over the vulnerabilities of microgrids, but there exist weaknesses in low-frequency oscillations (LFOs) and limitations of synchronization due to electromagnetic characteristics. Therefore, we study how to accommodate the features of microgrids in the PSS of SGs and further enhance present advantages. The PSS proposed in this paper not only damps out LFOs by conventional lead-lag compensation but also provides additional damping torque according to the magnitude of the perturbation using a synchronous impedance characteristic (SIC). The proposed Lyapunov energy-function-based control strategy can also increase the synchronizing power of the SG to improve transient stability. For performance verification, we use parameters obtained by the particle swarm optimization (PSO) algorithm to compare the existing PSS with the proposed one and analyze them. The effect of the proposed micro-power system stabilizer (μPSS) is analyzed through frequency response analysis, and finally, small-signal stability analysis and the performance of transient stability are verified by time-domain simulation (TDS) on MATLAB/Simulink.