CGClaude Gout

Claude Gout

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Claude Gout has a total of 62 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Architecture and controlling factors of intra-salt deformation in diapiric structures: A numerical modelling approach

    by Manel Ramos, Ritske Huismans, Leonardo Muniz Pichel, Thomas Theunissen, Jean-Paul Callot, Alexandre Pichat, Naim Célini, Sabine Delahaye, Claude Gout

    Salt tectonics is often simplified with a homogeneous halite rheology, but natural evaporite sequences are heterogeneous, including frictional-plastic anhydrite and low-viscosity K-Mg salts, that can alter the architecture and controlling factors of intra-salt deformations in diapiric structures. We use 2D high-resolution finite-element simulations (FANTOM) to investigate how the vertical position of intra-salt layers controls the formation, geometry, and internal architecture of salt diapirs. The models simulate diapirism driven by sedimentary loading (with varying sedimentation rates and no basal tectonics) and explore different intra-salt stratigraphies. Our results shows that layer position have a first-order control on diapir evolution. When an anhydrite layer is placed at the top of the salt sequence, it acts as a stiff caprock that limits salt flow, resulting in a broad, low-relief salt structure with minimal surface deformation. In contrast, a mid-level anhydrite induces flow partitioning and a bimodal deformation pattern: it decouples movements above and below anhydrite, producing sharp diapir margins and localized folding and disruption of the internal layers. This leads to contrasted intra-diapir complexity. If the strong layer is located near the base of the salt, it initially shows high diapirism from the upper salt but eventually forces the lower salt to flow inside this first diapirs. These tall diapirs are associated with intense rotation of the minibasins and the development of welds where the intra-salt layer breaks and salt flows upward. The presence of low-viscosity K-Mg salt layers further amplifies internal deformation: these weak units flow fast and undergo drastic thinning, creating additional shear zones and irregular internal geometries without significantly impeding diapir growth. Our high-resolution models demonstrate that even thin intra-salt layers significantly influence the localization of deformation, thereby shaping both the external form and internal structure of diapirs. These results are applicable to layered evaporite sequences (LES, e.g. Zechstein Basin) and offer a new way for interpreting complex intra-salt features observed at the seismic scale. These insights have important implications for structural interpretation, resource exploration, and the development of salt formations as effective caprock for CO₂ and for hydrogen storage in salt caverns.

  • Open Access

    Influence of Intra-Salt Lithological Variability on Salt Tectonics: A numerical modelling approach

    by Manel Ramos, Ritske Huismans, Leonardo Muniz Pichel, Thomas Theunissen, Jean-Paul Callot, Alexandre Pichat, Naim Célini, Sabine Delahaye, Claude Gout

    Understanding the internal structure of intra-salt layers within deformed salt bodies is crucial for geo-energy storage in salt-bearing basins. This study integrates high-resolution 2D finite element numerical modelling to explore how variations in salt stratigraphy, lithological heterogeneity, and post-salt sedimentation patterns influence deformation processes and the internal architecture of diapiric salt structures across different basin geometries. Specifically, we examine the impact of lithological variability by systematically varying the position and thickness of frictional-plastic, relatively strong intra-salt layers (e.g., anhydrite or carbonates) within a viscous layered salt sequence. The position of the strong intra-salt layer within a salt body significantly influences salt flow dynamics, internal and external diapir morphology, and overburden deformation. When located at the top, the strong layer acts as a stiff cap, restricting upward salt flow and producing broader diapirs with limited overburden deformation. When located in the middle, it localizes strain within the salt, leading to sharper and more discrete diapirs. When located at the bottom, it enhances upward salt flow of the overlying weak salt layer, resulting in tall, narrow, and more intrusive diapirs with more pronounced overburden deformation. In all cases, the strong intra-salt layer breaks and forms boudins, which vary in dimensions, distribution and structural complexity according to their different position and thickness. These intra-salt boudins can be transported by the salt flow to the upper parts of salt structures, but are often trapped at diapir pedestals, beneath diapir flanks, or under minibasins, where they experience repeated folding and refolding as the weaker, less dense salt flows around them. The presence of this heterogeneous intra-salt layer alters the flow paths of the weaker salt and controls both the geometry of salt structures and associated deformation in the overburden. These findings underscore the critical role of stratigraphic and tectonic controls in shaping both the external and internal architecture of salt diapirs, patterns that are particularly relevant for the North Sea, where salt structures play a crucial role in emerging geo-energy storage.

  • Open Access

    Megaflaps flanking salt walls: strain and stress distribution from field observations to numerical modeling.

    by Marine Lartigau, Jean-Paul Callot, Claude Gout

    The megaflaps are halokinetic objects of multi-kilometer extension corresponding to vertical or overturned strata flanking salt walls or resulting welds. Although their geometry and mechanical behavior can be considered similar to detachment folds, their development mechanism and the consequences regarding strain record remain to be specified.Megaflaps record strain before, during, and/or after tilting, and their development involves mechanisms specific to each megaflap (i.e. force folding with limb rotation or kink-band migration, passive folding), to their geological characteristics and the local and regional context. We highlight that the initial carapace, covering the evaporites and forming the future megaflap, constitutes a continuous mechanical unit allowing the transmission of an early homogeneous stress (either local or regional). Folding is then initiated by limb rotation, hinge migration or passive folding. During diapirism, the piercement of the salt structure generally accommodates the stress, that preserves the adjacent sediments from regional deformation. However, due to the evaporites loading, we observe a very localized compressive strain, which is perpendicular to the evaporite wall and results in the development of salt-related meso- and microstructures.We compared the stress states determined on field analogs are with 2D uncoupled geomechanical models. The stress-strain distribution of two types of megaflaps were studied: a single development step megaflap, presenting a main mechanical unit (e.g. Karayün megaflap, Turkey), and a sequential development megaflap, presenting several mechanical units (e.g. Cotiella megaflap, Spain). Our models are based on well-defined geometries of known field analogs. In each model, the layers constituting the future megaflap record compressive strains, varying in extent and localized near the salt wall. Horizontal compression parallel to the layers, induced by salt push, is consistently observed and matches with field observations. Our models also depict layer folding, which can be accommodated through various mechanisms (extrados and intrados deformation, compressive mechanical guidance). Finally, it seems that the late stage tightening deformation would occur through an intensification of stress magnitude induced by complete welding. Our models show that welding significantly increases the maximum stress magnitude. The ratio between compressive stresses and background stresses is thus four to five after welding, compared to a ratio of two without welding. This matches our observations regarding the formation of new mesostructures during the late stage tightening within the Cotiella megaflap, induced synchronously in all layers (regardless their attitudes, already vertical and overturned, or gently dipping). In contrast, the preservation of salt bodies is correlated with the absence of late micro- and mesostructures perpendicular to the vertical layers as observed in other known field analogs (e.g., Sivas Basin, Paradox Basin, Witchelina diapir). Consequently, some megaflaps may remain unaffected by late-stage tightening even within a regional compressive system undergoing shortening.

  • Open Access

    Modelling dynamics of sedimentary basins: using geological history to predict subsurface activities at large-scale

    by Claude Gout, Marie-Christine Cacas-Stentz, Adriana Traby, Nathalie Collard

    The dynamics of sedimentary basins is a complex combination of synchronous generally non-linear processes. In these natural systems, fluids migration and associated transfers play a fundamental role, even more so as they represent resources that are or may become essential for human societies. One way of assessing the potential of sedimentary basins is to model their past behaviour numerically.Basin models have been developed since the 1990s for the needs of the oil industry, with the initial aim of assessing the thermal history, i.e. the maturation and expulsion of hydrocarbons from source rocks with variable kinetics and initial composition. These models are used for hydrocarbon prospect assessment in a wide range of sedimentary basins. They have evolved with the integration of the simulation of compaction mechanisms and fluid migration by Darcean single-phase or multi-phase flows. Still with an operational objective in mind, one of these models has been extended to simulate the transport of thermal energy and chemical elements in fluids, thereby helping to assess the geothermal and large-scale storage potential of a basin. The explicit representation of faults and unconformities, as well as the calculation of seal or reservoir formation fracturing as a function of fluid pressures, enables the plumbing system to be represented on a basin scale. In this network of drains, single- or multiphase fluids carrying compounds can interact with the rocks, according to the principles of reactive transport. Some of these simulations are being experimented using AI techniques. In these digital experiments, elements tracking could be a true added value for basin’s dynamics understanding.A coupled simulation of this kind, combining conductive and advective thermal physics, mechanics (particularly of porous media), the hydraulics of multiphase fluids in porous media, chemistry of reactive transport and even the impact of bioactivity on basin’s fluids, representing geological processes in the subsurface on a large scale, makes it possible to quantify mass and energy transfers in the past. The result is a physically balanced model of the current spatial distribution of pressure, stress, temperature, mass, solid or fluid elements.These results can be useful both in economic applications for first-order assessment of the resources of any sedimentary basin and in the scientific field for defining the boundary conditions of more specialised models. Initial experiments demonstrating the use of multiphysics models on a basin scale for CCS applications and geothermal energy assessment will be shown.

  • Toward the calibration of 2D thermomechanical simulations of magma poor passive continental margins: method, validation and case example

    by Paul Perron, Laetitia Le Pourhiet, Anthony Jourdon, Tristan Cornu, Claude Gout

    In recent decades, geodynamic modelers have aimed to comprehend key factors governing continental rifting, such as the extension rate, lithospheric thickness, Moho mechanical coupling, and mantle convection’s thermal influence. While prior models offered insights into rifting processes, they lacked the calibration to specific Earth regions. Introducing heterogeneities into the model does in some cases help to calibrate the simulation results to a geological data from a specific region. Acknowledging structural inheritance as a form of kinematic forcing in the models, and recognizing the challenge of anticipating and identifying all inherited geological structures present before rifting, a new modeling approach was devised. This method integrates a new kinematic module into the pTatin2D code, allowing for calibrating numerical simulations with regional geological and geophysical dataset over time while solving for mechanical balance using Stokes flow to ensure that crustal deformation remains consistent with mantle dynamics. By calibrating against a 2D cross-section extracted from the final state of a 3D model, we show that the approach predicts thermal history and deformation paths beyond calibration points. In particular, the thermo-mechanical feedback can help mitigate some uncertainties in the deformation path. Applied to Iberia–Newfoundland margins, the method demonstrates effectiveness in real-case scenarios, aligning with previous reconstructions by incorporating faults and lower crustal flow.


  • Open Access

    2‐D Geodynamic Modeling of the Central South Atlantic Wide Rifted Margins, Implications for Evaporite Deposition

    by T. Theunissen, R. S. Huismans, D. Rouby, C. Gout

    The thick late syn‐ to early post‐rift shallow water evaporites in the most distal part of wide rifted margins is paradoxical with the deep depression at crustal breakup time predicted by isostatically compensated lithospheric thinning. Elevation of the distal margin and water depth during deposition of the late syn‐rift evaporites in the central South Atlantic are not well constrained and remain to be quantified. We use forward 2‐D thermo‐mechanical modeling coupled with melt prediction and surface processes to assess the contribution of lithospheric and mantle processes on the distal margin topography and subsidence history during continental rifting. Models show that (a) counter‐flow of depleted lower lithospheric mantle during rifting explains the magma‐poor nature of these margins and (b) weak crust and syn‐rift sediment control the wide crustal necking and subsidence history of the distal margin. Integration of our modeling results with quantified geophysical and geological observations suggests that (a) base level was down to −600 m below present‐day global sea level (bsl) during distal margin formation in the Aptian before sag and evaporite deposition, (b) base level was about −300/−400 m bsl at the end of evaporite deposition, and (c) scenarios with a fixed shallow base level (−400 m bsl) or with an increasing base level from an initially deep position (−1,600 m bsl) during evaporite deposition can both fit the observed evaporite distribution. However, erosional features along the base of evaporites suggest a deep initial base level.


  • Open Access

    Rift thermal inheritance in the SW Alps (France): insights from RSCM thermometry and 1D thermal numerical modelling

    by Naïm Célini, Frédéric Mouthereau, Abdeltif Lahfid, Claude Gout, Jean-Paul Callot

    Conceptual models of orogenic accretionary prisms assume that peak temperatures (Tmax⁡) increase towards the internal domains as crustal rocks are accreted from the lower to the upper plate. However, the recognition of pre-orogenic heating events in mountain belts questions the magnitude of thermal overprint during nappe stacking. Using Raman spectroscopy on carbonaceous material (RSCM) to calculate Tmax⁡, we have investigated the thermal record of Lower Jurassic to Eocene strata exposed along six stratigraphic sections at the front of the Digne Nappe (SW Alps), from the Devoluy Massif to the Castellane Arc. Our results highlight two groups of depth-dependent temperatures: (1) a regionally extensive and constant Tmax⁡ up to 300–330 ∘C measured in the Jurassic succession and (2) regionally variable lower temperatures (<150 ∘C) recorded either in the Upper Mesozoic or the syn-orogenic sequence. Modelling shows that the highest palaeotemperatures were achieved during the Early Cretaceous (∼ 130 Ma), associated with the Valaisan–Vocontian rifting, while the lowest Tmax⁡ reflect post-rift thermal relaxation in the Alpine foreland basin. This study provides a striking new example where mid-crustal palaeotemperatures measured in sediments accreted from the downgoing plate are inherited. An estimated peak thermal gradient of 80–90 ∘C km−1 requires a crustal thickness of 8–10 km during the Early Cretaceous, hence placing constraints for tectonic reconstruction of rift domains and geophysical interpretation of current crustal thickness in the SW Alps. These results call for the careful interpretation of palaeothermal data when they are used to identify past collisional thermal events. Where details of basin evolution are lacking, high-temperature records may be misinterpreted as syn-orogenic, which can in turn lead to an overestimation of both orogenic thickening and horizontal displacement in mountain belts.


  • Open Access

    Reply on RC3

    by Naïm Célini, Frédéric Mouthereau, Abdeltif Lahfid, Claude Gout, Jean-Paul Callot

    Conceptual models of orogenic accretionary prisms assume the increase in peak temperatures (Tmax) towards the internal domains as crustal rocks are accreted from the lower to the upper plate. Yet, the recognition of pre-orogenic heating events in mountain belts questions the magnitude of thermal overprint during nappe stacking. Using Raman Spectroscopy on Carbonaceous Material (RSCM) to calculate Tmax, we have investigated the thermal record of Lower Jurassic to Upper Cretaceous strata exposed along the Digne Nappe, at the front of the SW Alps. Our results highlight two groups of depth-dependent temperatures: (1) a regionally extensive constant Tmax up to 300–330 °C measured in the Jurassic succession and (2) regionally variable lower temperature (<150 °C) recorded either in the upper Mesozoic, the nappe stack or the syn-orogenic sequence. Modelling shows that the highest paleotemperatures were achieved during the Early Cretaceous (~130 Ma), during the Valaisan-Vocontian rifting, while the lowermost ones reflect syn-orogenic burial in the Alpine foreland basin. This study provides a striking new example where mid-crustal paleotemperatures measured in lower plate sediments now accreted at the thrust front are inherited. Estimated peak thermal gradient of 80–90 °C/km requires crustal thickness of ~15 km during the Early Cretaceous, hence placing new constraints for tectonic reconstruction of rift domains and geophysical interpretation of current crustal thickness in the SW Alps. These results call for the careful interpretation of paleothermal data when they are used to identify past collisional events. Where details of basin evolution are lacking high-temperature record may be misinterpreted as syn-orogenic, which can in turn lead to overestimating both orogenic thickening and horizontal displacement in mountain belts.