HXHuanwei Xu

Huanwei Xu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Huanwei Xu has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • YOLOv8n-GAM: an improved surface defect detection network for hot-rolled strip steel

    by Huanwei Xu, Xuyuan Xiao, Zewei Zhao, Zhonglai Wang

    Production defects caused by irresistible factors such as process design problems or differences in steel properties in strip production affect the economic benefits of the enterprise and threaten production safety. Traditional defect detection methods are difficult to achieve real-time and high-precision detection, so developing surface defect detection methods based on deep learning is of great significance for strip production. In order to effectively improve the accuracy of the deep learning model in detecting surface defects on hot-rolled strip, in this work we propose a real-time detection model for surface defects on strip steel based on the YOLOv8n model. Firstly, the newly convolutional layer Con5v is designed to replace the original convolutional layer in the neck, and an attention mechanism is added in front of each Con5v to improve the algorithm’s ability to extract small target information. Secondly, an additional set of upsampled feature extraction units is added to the neck in order to enhance the spatial information of the feature map. Subsequently, a set of feature fusion units is incorporated and the convolutional layers in it are improved to provide better feature maps. Thirdly, the number of decoupling detection heads is increased to receive more high-quality features. The final experimental results show that YOLOv8n-GAM (YOLOv8 Nano Model with Global Attention Mechanism) achieves 81.4mAP and 82.0FPS on the NEU-DET dataset and 71.2mAP and 55.0FPS on the GC10-DET dataset, which are 5.7% and 6.9% higher than those of YOLOv8n, respectively. The model proposed in this paper achieves a comprehensive performance improvement in strip steel.


  • Heat Transfer Improvement of Prismatic Lithium-Ion Batteries via a Mini-Channel Liquid-Cooling Plate With Vortex Generators

    by Huanwei Xu, Shizhe Xiong, Wei Li, Lingfeng Wu, Zhonglai Wang

    Temperature is a critical factor affecting the performance and safety of battery packs of electric vehicles (EVs). The design of liquid cooling plates based on mini-channels has always been the research hotspots of battery thermal management systems (BTMS). This paper investigates the effect of adding vortex generators (VGs) to the liquid cooling channel on the heat dissipation capacity and temperature uniformity of the battery. The shape of the vortex generators (triangle, trapezoid, and semicircle), placement position (middle, inlet, and outlet of the channel), different flowrates, and different numbers of channels on the heat dissipation of the battery are systematically analyzed. The research results indicate that (1) compared to the triangular and trapezoidal vortex generators, the semicircular vortex generators have a lower cost in terms of pressure drop while maintaining the same heat dissipation efficiency. The pressure drop of the semicircular vortex generators is 15.89% less than that of the trapezoidal vortex generators and 20.49% less than that of the triangular vortex generators. (2) The effect of adding vortex generators is more obvious when the flowrate is small in the cooling channels. When the flow velocity is 0.025 m/s, the heat dissipation performance can be increased by 7.4%. (3) When the cross-sectional area of the inlet is fixed, the heat dissipation effect of more channels is better. The average temperature of three and seven cooling channels decreases from 311.23 K to 310.07 K, with a decrease of 8.87%. (4) The temperature difference can be effectively reduced when the vortex generators are concentrated near the outlet of the flow outlet. Its temperature difference is 1.8 K lower than that when the vortex generators are placed near the inlet, with a decrease of 10.5%.


  • Open Access

    Abnormal Conductive State Identification of the Copper Rod in a Nickel Electrolysis Procedure Based on Infrared Image Features and Position Characteristics

    by Rui Sun, Gang Qin, Gaibian Li, Jinbao Hu, Jingqi Xiong, Huanwei Xu

    In the nickel electrolysis industry, detection of the conductive state of copper rods is an important part of production procedure management, as abnormal conductive states of the copper rod result in a decline in the quality of the electrodeposited nickel plate. Conventional treatment consists of manual detection and handing, which is inefficient and induces more problems, such as the safety of the insulation. Because abnormal conductive states are only located between the copper rod and busbar, it has obvious position characteristics, and abnormal conductive states also induce a calorific difference in a particular area, which can be detected in an infrared image. We can use the infrared feature and position characteristics to identify the abnormal conductive faults. This paper introduces a method and practice for the identification of abnormal conductive faults in a conductive copper rod in the nickel electrolysis procedure using computer vision theory, including infrared image segmentation with position characteristics, infrared feature extraction, and conductive fault identification with SVM (support vector machine). The result shows that the method can divide the conductive states of the copper rod into abnormal heating conditions, normal operating conditions, and open circuit conditions, with a 90% accuracy rate on the obtained samples.


  • Open Access

    Fluid Analysis and Structure Optimization of Impeller Based on Surrogate Model

    by Huanwei Xu, Wenzhang Wei, Hanjin He, Xuerui Yang

    The surrogate model technology has a good performance in solving black-box optimization problems, which is widely used in multi-domain engineering optimization problems. The adaptive surrogate model is the mainstream research direction of surrogate model technology, which can realize model fitting and global optimization of engineering problems by infilling criteria. Based on the idea of the adaptive surrogate model, this paper proposes an efficient global optimization algorithm based on the local remodeling method (EGO-LR), which aims at improving the accuracy and optimization efficiency of the model. The proposed algorithm firstly constructs the expectation improvement (EI) function in the local area and optimizes it to get the update points. Secondly, the obtained update points are added to the global region until the global accuracy of the model meets the requirements. Then the differential evolution algorithm is used for global optimization. Sixteen benchmark functions are used to compare the EGO-LR algorithm with the existing algorithms. The results show that the EGO-LR algorithm can quickly converge to the accuracy requirements of the model and find the optimal value efficiently when facing complex problems with many local extrema and large variable spaces. The proposed algorithm is applied to the optimization design of the structural parameter of the impeller, and the outflow field analysis of the impeller is realized through finite element analysis. The optimization with the maximum fluid pressure (MP value) of the impeller as the objective function is completed, which effectively reduces the pressure value of the impeller under load.


  • Open Access

    An Ensemble of Adaptive Surrogate Models Based on Local Error Expectations

    by Huanwei Xu, Xin Zhang, Hao Li, Ge Xiang

    An ensemble of surrogate models with high robustness and accuracy can effectively avoid the difficult choice of surrogate model. However, most of the existing ensembles of surrogate models are constructed with static sampling methods. In this paper, we propose an ensemble of adaptive surrogate models by applying adaptive sampling strategy based on expected local errors. In the proposed method, local error expectations of the surrogate models are calculated. Then according to local error expectations, the new sample points are added within the dominating radius of the samples. Constructed by the RBF and Kriging models, the ensemble of adaptive surrogate models is proposed by combining the adaptive sampling strategy. The benchmark test functions and an application problem that deals with driving arm base of palletizing robot show that the proposed method can effectively improve the global and local prediction accuracy of the surrogate model.


  • Open Access

    Reliability‐Based Multidisciplinary Design Optimization under Correlated Uncertainties

    by Huanwei Xu, Xin Wang, Wei Li, Mufeng Li, Suichuan Zhang, Cong Hu

    Complex mechanical system is usually composed of several subsystems, which are often coupled with each other. Reliability‐based multidisciplinary design optimization (RBMDO) is an efficient method to design such complex system under uncertainties. However, the present RBMDO methods ignored the correlations between uncertainties. In this paper, through combining the ellipsoidal set theory and first‐order reliability method (FORM) for multidisciplinary design optimization (MDO), characteristics of correlated uncertainties are investigated. Furthermore, to improve computational efficiency, the sequential optimization and reliability assessment (SORA) strategy is utilized to obtain the optimization result. Both a mathematical example and a case study of an engineering system are provided to illustrate the feasibility and validity of the proposed method.


  • Open Access

    Multidisciplinary reliability design optimization under time-varying uncertainties

    by Huanwei Xu, Wei Li, Xin Wang, Cong Hu, Suichuan Zhang

    Degradation failure is one of the main reasons for complex mechanical systems losing their functions. Research on multidisciplinary design optimization under uncertainties should shift from static uncertainties to time-varying uncertainties. Aiming at time-varying uncertainties in mechanical systems, we put forward a multidisciplinary reliability design optimization method using stochastic process theory. First, we investigated the characteristics of time-varying uncertainties in complex mechanical systems, and then utilized stochastic process theory to quantify time-varying uncertainties. Second, through combining the multidisciplinary simultaneous analysis and design optimization method, the model of multidisciplinary design optimization under time-varying uncertainties is established. Moreover, a mathematical problem and an engineering example are provided to illustrate the accuracy and effectiveness of the proposed method.