DKDanil V. Kuzenko

Danil V. Kuzenko

*This is an algorithmically generated author record based on publicly available information.

Danil V. Kuzenko has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Activation Energy of the Dielectric Permittivity of Pb(Zr,Ti)O3 Solid Solutions near the Morphotropic Boundary Below the Curie Temperature

    by D. V. Kuzenko, A. I. Bazhin, N. A. Spiridonov

    For the ferroelectric ceramic Pb0.9Ba0.1(Zr1–xTix)O3 (x = 0.45, 0.50, 0.55, 0.60), the activation energy of permittivity was determined from an analysis of the temperature dependences of permittivity below the Curie temperature. It was established for the first time that this activation energy has a minimum for solid solutions corresponding to a morphotropic phase boundary (x ≈ 0.50).

  • Dielectric Relaxation and Activation of Dielectric Constant near the Ferroelectric Phase Transition in BaTiO3 and Pb0.9Ba0.1(Zr0.5Ti0.5)O3 Ceramics

    by D. V. Kuzenko

    The dielectric properties of BaTiO3 and Pb0.9Ba0.1(Zr0.5Ti0.5)O3 ceramics were studied within the temperature range of 300–600 K at frequencies of 25 Hz–500 kHz. For both materials, dispersion of the dielectric response was observed, both below and above the Curie temperature. Analysis of the obtained results revealed that this dispersion is associated with thermal activation processes, the nature of which is discussed.

  • Stabilization of Ferroelectric Polarization of Ultrathin Films by Surface Modification with Ion Beams

    by D. V. Kuzenko

    The stabilization of spontaneous polarization in ultrathin ferroelectric films was studied. For this purpose, surface modification by implantation of metal ions with energies of 102–103 eV was proposed. Based on Lindhard–Scharff–Schiøtt (LSS) theory, this approach made it possible to consider the electronic energy-loss mechanism during interaction and excitation of the electronic subsystems of the interacting ions. The Thomas–Fermi screening length λF–D and Debye screening length λD were calculated to determine the conditions for screening the electric charge of free electrons. The importance of accounting for the temperature dependence of the dielectric permittivity ε(T) of the ferroelectric target when selecting the temperature conditions for surface modification by ion beams was demonstrated. This dependence is associated with activation processes of the ferroelectric phase transition having different activation energies, including activation and interaction of the defect, domain, and electronic structures of the ferroelectric. To select the metal ion for implantation, the interaction potential U between the implanted metal ions and the ions of the cubic perovskite crystal structure was calculated using the Thomas–Fermi model with an exponential function describing electron screening of the nuclei. SrTiO3, BaTiO3, PbTiO3, and the Pb(Zr,Ti)O3 solid solution were used as model samples.

  • Open Access

    The excitation energy spectrum of the electron and spin subsystems of ferroelectrics and multiferroics, determined from ferroelectric and magnetic phase transitions

    by Danil V. Kuzenko, Aleksey V. Bezus

    Ferroelectric materials and multiferroics are two classes of functional materials that exhibit unique electrical and magnetic properties that can be altered by external fields. Ferroelectrics are actively used as sensors, actuators, and energy storage devices, while multiferroics hold promise for future use in new types of memory and spintronic devices. Investigating the thermal excitation of the electron and spin subsystems of these materials is of theoretical and practical interest. Based on this, in this study, the vicinity of phase transitions exhibiting significant spin-phonon and electron-phonon interactions was analyzed for the ferroelectric BaTiO3 and the multiferroics YMnO3 and HoMnO3: a second-order transition from the antiferromagnetic state to the paramagnetic state at the temperature for YMnO3 and HoMnO3; a first-order magnetostructural spin-reorientation transition for HoMnO3; and a first-order ferroelectric phase transition of the displacement type at the Curie temperature for BaTiO3. From the temperature dependences of the permittivity, magnetic permeability, and heat capacity, the activation energies of these quantities in the neighborhood of the phase transitions were obtained. It is suggested that the obtained activation energy values for magnetic and dielectric permeability can serve as parameters for estimating the excitation processes of the spin and electronic subsystems, respectively; this constitutes the novelty of this study.

  • Open Access

    Influence of external influences on the activation of domain walls of ferroelectric perovskites

    by Danil V. Kuzenko

    Purpose: The article aims to establish the regularities of the influence of external influences (thermal and electrical) on the activation of domain walls in oxygen-octahedral-type ferroelectric materials with perovskite structure which have a wide application in electronic devices. One of the problems in this case is the stability of domain walls with respect to external influences. With this in mind, the aim of the paper is to determine the activation energy of irreversible motion of domain walls when switching the polarization of a ferroelectric by electric field in a wide temperature range.Experimental: The value of the critical energy Wmax of interaction of ferroelectric domains with an external electric field necessary for irreversible change of the domain structure of a ferroelectric under different thermal conditions is determined. For this purpose, the dielectric hysteresis loops P(E) of samples obtained at different temperatures were analyzed. Ferroelectric materials with oxygen-octahedral perovskite structure were chosen as objects of study: BaZrO3/BaTiO3 superlattice, Pb(Zr0.3Ti0.7)O3, ceramics (Pb0.96Sr0.04(Mg1/3Nb2/3)0.275(Ni1/3Nb2/3)0.1Ti0.375Zr0.25O3 and ceramics Pb0.88Ba0.06Sr0.06(Mg1/3Nb2/3)0.37Zr0.375Ti0.255O3).Conclusions: Temperature dependences of the critical energy Wmax of interaction of ferroelectric domains with an external electric field necessary for irreversible change of the domain structure of a ferroelectric have been determined. The assumption that the energy Wmax has the meaning of the activation energy of the domain structure of a ferroelectric at switching of polarization by an electric field, necessary for irreversible change of its domain structure, has been substantiated. It is established that the critical energy Wmax decreases linearly with temperature in a wide temperature range below the Curie point. The obtained results have scientific and practical value, since they allow to determine the conditions of stabilityof the domain structure of a ferroelectric to external influences and expand the possibilities of application of the Sawyer-Tauer method for determination of activation energies of irreversible change of the domain ferroelectric structure


  • Frequency-Dependent Temperature Activation of Conductivity and Dielectric Constant of Magnetoelectric BiFeO3

    by D. V. Kuzenko

    We presented the research results by impedance spectroscopy of frequency-dependent temperature activation of the conductivity and dielectric constant of the single-crystal magnetoelectric bismuth ferrite BiFeO3, a promising functional material for RAM devices. The activation energies of low-temperature (110–300 K) processes of motion of charge carriers of the multiferroic structure and the logarithmic dependence of the critical temperatures between these processes on the frequency are determined in AC regime. It has been established that in this temperature range there is a correlation of AC characteristics with low- to high-temperature activation of the parameters of the BiFeO3 crystal lattice.


  • Open Access

    Erratum to: Activation Analysis of the Temperature Dependence of the Dielectric Constant of Ferroelectrics

    by D. V. Kuzenko

    An Erratum to this paper has been published: https://doi.org/10.1134/S1062873824110042

  • Determination of the Activation Energy of Defects in Ferroelectrics by the Method of Temperature Activation–Relaxation of the Dielectric Permittivity

    by D. V. Kuzenko, Кузенко Д. В.

    The article proposes a method of temperature activation–relaxation of the permittivity for determining the activation energy of defects in ferroelectrics using lead zirconate–titanate Pb(Zr,Ti)O3 samples as an example. This method is based on the analysis of relaxation of the permittivity after thermal annealing and the analysis of the temperature activation of the permittivity of the Pb(Zr,Ti)O3 ferroelectric. The equality of the activation energy corresponding to the process of migration of oxygen vacancies and the thermal energy of the decay of the domain structure was established, which was confirmed by studying the surface of the samples by scanning electron microscopy. When this temperature was reached, the surface of the domain walls was detached from oxygen vacancies, which are pinning centers. This manifested itself in photographs of the microstructure as a change in the ordering of the domains emerging on the surface of the sample, which led to an irreversible decrease in the permittivity of the sample. For the obtained activation energies, the physical process of domain wall motion activation is established, which is determined by their pinning on structural defects (oxygen vacancies). It is assumed that the irreversible decay of the domain structure occurs when the domain walls are displaced by distances exceeding the elementary lattice parameter of the ferroelectric. The proposed method can be part of a comprehensive study that includes electrophysical, microscopic and X-ray methods.

  • Determination of the Activation Energy of Defects in Ferroelectrics by the Method of Temperature Activation–Relaxation of the Dielectric Permittivity

    by D. V. Kuzenko

    The article proposes a method of temperature activation–relaxation of the permittivity for determining the activation energy of defects in ferroelectrics using lead zirconate–titanate Pb(Zr,Ti)O3 samples as an example. This method is based on the analysis of relaxation of the permittivity after thermal annealing and the analysis of the temperature activation of the permittivity of the Pb(Zr,Ti)O3 ferroelectric. The equality of the activation energy corresponding to the process of migration of oxygen vacancies and the thermal energy of the decay of the domain structure was established, which was confirmed by studying the surface of the samples by scanning electron microscopy. When this temperature was reached, the surface of the domain walls was detached from oxygen vacancies, which are pinning centers. This manifested itself in photographs of the microstructure as a change in the ordering of the domains emerging on the surface of the sample, which led to an irreversible decrease in the permittivity of the sample. For the obtained activation energies, the physical process of domain wall motion activation is established, which is determined by their pinning on structural defects (oxygen vacancies). It is assumed that the irreversible decay of the domain structure occurs when the domain walls are displaced by distances exceeding the elementary lattice parameter of the ferroelectric. The proposed method can be part of a comprehensive study that includes electrophysical, microscopic and X-ray diffraction measurements to determine the defective structure of a ferroelectric material.


  • Open Access

    Activation Analysis of the Temperature Dependence of the Dielectric Constant of Ferroelectrics

    by D. V. Kuzenko

    For ferroelectrics lead zirconate titanate and barium titanate, an exponential dependence of the dielectric constant on temperature is shown, provided that the Curie–Weiss law is satisfied. The temperature of equality of ferroelectric dielectric constants for activation processes caused by the interaction of domain walls with point defects, as well as the corresponding activation energies, have been determined.