Zhongyang Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhongyang Wang has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
- Tongxiang Fan
State Key Laboratory of Metal Matrix Composites School of Materials Science and Engineering Shanghai Jiao Tong University Shanghai China
9 shared publications Liping Tong
School of Materials, Shanghai Dianji University, Shanghai, People’s Republic of China
7 shared publicationsRunhua Fan
College of Ocean Science and Engineering, Shanghai Maritime University, Shanghai, China
7 shared publications- Xiao Zhou
Shanghai Jiao Tong University
7 shared publications Zongxiang Wang
7 shared publicationsHao Gong
State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai, 200240, China
6 shared publications
Latest Publications
- Open Access
- 30 June 2026
- Published by Springer Nature in Light: Science & Applications
- Vol. 15 (1)
Bi-layer photonic random meta-composite for cryogenic thermal control by ultra-broadband scattering matched reflectance
Cryogenic thermal control coatings represent a significant advancement over existing coatings limited to high reflectance in the 0.2–2.5 μm solar spectrum range, being able to reflect 96.6% of solar irradiance and to reach about 145 K equilibrium temperature, offering transformative potential for deep-space exploration, remote sensing, and other cryogenic applications. To achieve the cryogenic temperature further lower than 100 K in space, the peculiar optical property to reflect 99.9% of solar irradiance becomes necessary, which can be realized by an ultra-broadband reflectance from 0.2 to 8 μm. Here, we propose a bi-layer meta-composite comprising two distinct photonic random media, where rationally designed scatterer sizes selectively target short- and long-wavelength solar irradiance. By matching the scattering peak regimes, the meta-composite achieves a weighted solar reflectance of 97.3% over an ultrabroad 0.2–8 μm region. In the home-built deep-space simulator, the bi-layer meta-composite maintains an equilibrium temperature of 145 K, superior to existing coatings designed for room-temperature thermal control. Ground simulated irradiation tests further demonstrate exceptional optical stability under charged particles and atomic oxygen irradiations, with degradation of less than 1.5%. Moreover, the meta-composite retains optical properties comparable to existing coatings even after long-term ultraviolet irradiation. This work not only highlights the viability of photonic random meta-composites for cryogenic thermal control but also introduces a scattering regime matching strategy to broaden the spectral selectivity of disordered photonic systems.
- 30 June 2026
- Published by Springer Nature in Light: Science & Applications
- Vol. 15 (1)
Open AccessBi-layer photonic random meta-composite for cryogenic thermal control by ultra-broadband scattering matched reflectance
Cryogenic thermal control coatings represent a significant advancement over existing coatings limited to high reflectance in the 0.2–2.5 μm solar spectrum range, being able to reflect 96.6% of solar irradiance and to reach about 145 K equilibrium temperature, offering transformative potential for deep-space exploration, remote sensing, and other cryogenic applications. To achieve the cryogenic temperature further lower than 100 K in space, the peculiar optical property to reflect 99.9% of solar irradiance becomes necessary, which can be realized by an ultra-broadband reflectance from 0.2 to 8 μm. Here, we propose a bi-layer meta-composite comprising two distinct photonic random media, where rationally designed scatterer sizes selectively target short- and long-wavelength solar irradiance. By matching the scattering peak regimes, the meta-composite achieves a weighted solar reflectance of 97.3% over an ultrabroad 0.2–8 μm region. In the home-built deep-space simulator, the bi-layer meta-composite maintains an equilibrium temperature of 145 K, superior to existing coatings designed for room-temperature thermal control. Ground simulated irradiation tests further demonstrate exceptional optical stability under charged particles and atomic oxygen irradiations, with degradation of less than 1.5%. Moreover, the meta-composite retains optical properties comparable to existing coatings even after long-term ultraviolet irradiation. This work not only highlights the viability of photonic random meta-composites for cryogenic thermal control but also introduces a scattering regime matching strategy to broaden the spectral selectivity of disordered photonic systems.
- Open Access
- 29 April 2026
- Published by Springer Nature in Nano-Micro Letters
- Vol. 18 (1) , 349
Dual-Functional Photonic Metacoating Integrating Fluorescence Thermometry and High-Performance Space Radiative Cooling
Fluorescence thermometry offers a non-contact strategy for early detection of thermal instabilities on complex spacecraft surfaces, enabling reliable in-orbit temperature mapping. However, simultaneously achieving high-sensitivity fluorescence thermometry and efficient space radiative cooling remains challenging, as enhanced visible absorption improves thermometric response but increases solar heating. Here, we address this trade-off through a material-structure co-design strategy by developing an Eu-doped ZrO 2 submicrosphere metacoating that integrates space radiative cooling with fluorescence-based temperature sensing. Guided by photonic-structure optimization using a constrained-gradient optimizer combined with grid-search mapping, the optimized metacoating, featuring a submicrosphere diameter of 0.756 µm and a volume fraction of 35%, achieves an ultralow solar absorptance ( α s = 0.076) and a high thermal emittance ( ε = 0.931). In parallel, bandgap-driven compositional optimization identifies an optimal Eu content of 8.48%, enabling outstanding thermometric performance. The metacoating delivers a net cooling power of 323.69 W m −2 and a 77 °C temperature reduction relative to an Al sheet, outperforming representative oxide-based inorganic coatings. It allows temperature sensing over 173–433 K with a maximum relative sensitivity of 0.797% K −1 , surpassing fluorescent oxides with comparable absorption edges. Moreover, the metacoating maintains the lowest α s and reliable irradiation resistance under proton, electron, atomic oxygen and ultraviolet exposures, outperforming reported counterparts. Together with its scalable fabrication, this work establishes a dual-functional metacoating platform for intelligent spacecraft thermal management that combines efficient radiative cooling with high-sensitivity fluorescence thermometry.
- 29 April 2026
- Published by Springer Nature in Nano-Micro Letters
- Vol. 18 (1) , 349
Open AccessDual-Functional Photonic Metacoating Integrating Fluorescence Thermometry and High-Performance Space Radiative Cooling
Fluorescence thermometry offers a non-contact strategy for early detection of thermal instabilities on complex spacecraft surfaces, enabling reliable in-orbit temperature mapping. However, simultaneously achieving high-sensitivity fluorescence thermometry and efficient space radiative cooling remains challenging, as enhanced visible absorption improves thermometric response but increases solar heating. Here, we address this trade-off through a material-structure co-design strategy by developing an Eu-doped ZrO 2 submicrosphere metacoating that integrates space radiative cooling with fluorescence-based temperature sensing. Guided by photonic-structure optimization using a constrained-gradient optimizer combined with grid-search mapping, the optimized metacoating, featuring a submicrosphere diameter of 0.756 µm and a volume fraction of 35%, achieves an ultralow solar absorptance ( α s = 0.076) and a high thermal emittance ( ε = 0.931). In parallel, bandgap-driven compositional optimization identifies an optimal Eu content of 8.48%, enabling outstanding thermometric performance. The metacoating delivers a net cooling power of 323.69 W m −2 and a 77 °C temperature reduction relative to an Al sheet, outperforming representative oxide-based inorganic coatings. It allows temperature sensing over 173–433 K with a maximum relative sensitivity of 0.797% K −1 , surpassing fluorescent oxides with comparable absorption edges. Moreover, the metacoating maintains the lowest α s and reliable irradiation resistance under proton, electron, atomic oxygen and ultraviolet exposures, outperforming reported counterparts. Together with its scalable fabrication, this work establishes a dual-functional metacoating platform for intelligent spacecraft thermal management that combines efficient radiative cooling with high-sensitivity fluorescence thermometry.
- Open Access
- 1 January 2026
- Published by Tech Science Press in The International Conference on Computational & Experimental Engineering and Sciences
- Vol. 36 (2) , 1
Scattering-Regulated RP-Type Perovskite Ceramics for Radiative Thermal Protection
Radiative heat transfer dominates thermal loading in harsh environments, creating an urgent need for materials that combine high reflectance with robust thermal stability. Here, an RP-type perovskite ceramic is explored as a promising platform for radiative thermal protection. Instead of relying on conventional multilayer interference, its optical response is tailored through microstructural design based on Mie-scattering-mediated light regulation. By rationally engineering key structural features, backward scattering is enhanced and the reflection response is broadened over a wide spectral range. Guided by this structure-design concept, a high-reflectance ceramic thermal-protection material is experimentally realized, demonstrating the feasibility of integrating scattering regulation and ceramic processing within a unified design route. More broadly, this work establishes a general strategy for developing oxide ceramics with tailored radiative properties through structure-enabled light management. The results provide a useful framework for high-temperature thermal protection, where radiative shielding and thermal insulation need to be achieved simultaneously.
- 1 January 2026
- Published by Tech Science Press in The International Conference on Computational & Experimental Engineering and Sciences
- Vol. 36 (2) , 1
Open AccessScattering-Regulated RP-Type Perovskite Ceramics for Radiative Thermal Protection
Radiative heat transfer dominates thermal loading in harsh environments, creating an urgent need for materials that combine high reflectance with robust thermal stability. Here, an RP-type perovskite ceramic is explored as a promising platform for radiative thermal protection. Instead of relying on conventional multilayer interference, its optical response is tailored through microstructural design based on Mie-scattering-mediated light regulation. By rationally engineering key structural features, backward scattering is enhanced and the reflection response is broadened over a wide spectral range. Guided by this structure-design concept, a high-reflectance ceramic thermal-protection material is experimentally realized, demonstrating the feasibility of integrating scattering regulation and ceramic processing within a unified design route. More broadly, this work establishes a general strategy for developing oxide ceramics with tailored radiative properties through structure-enabled light management. The results provide a useful framework for high-temperature thermal protection, where radiative shielding and thermal insulation need to be achieved simultaneously.
- 30 December 2025
- Published by Wiley in Advanced Optical Materials
- Vol. 14 (3)
Harnessing Jahn‐Teller Distortion via Cation Disorder Engineering for Broadband Solar Absorptance
Materials with broadband high solar absorptance and excellent thermal stability are crucial for solar energy utilization. The distinct spectral separation between electronic transitions and carrier absorption leads to limited broadband absorption efficiency in ceramics. Strategic design of structural units with tunable absorption and bandwidth is essential to overcome spectral limitations for broadband solar harvesting. This study establishes an engineering strategy that synergistically exploits cation disorder and Jahn‐Teller distortions in spinel to achieve enhanced absorption. Through strategic incorporation of [CuO 6 ] and [CuO 4 ] structural units into MgAl 2 O 4 , Mg 0.4 Cu 0.6 Al 2 O 4 achieves a remarkable solar absorptance of 94.9% over 0.2–8 µm and demonstrates impressive thermal stability with less than 1.5% absorptance loss after annealing at 1300 °C for 100 h. The enhanced absorption is attributed to Jahn‐Teller distortions in both [CuO 4 ] tetrahedra and [CuO 6 ] octahedra, which induce significant multiple splitting of Cu‐3d orbitals, enhancing electronic transitions and carrier absorption. The developed material exhibits broadband solar absorptance, high‐temperature stability, and low density among oxide ceramics, making it a promising candidate for concentrated solar absorbers. These findings provide fundamental insights into the design of high‐performance solar absorbers through targeted manipulation of structural units and coordination environments.
- 30 December 2025
- Published by Wiley in Advanced Optical Materials
- Vol. 14 (3)
Harnessing Jahn‐Teller Distortion via Cation Disorder Engineering for Broadband Solar Absorptance
Materials with broadband high solar absorptance and excellent thermal stability are crucial for solar energy utilization. The distinct spectral separation between electronic transitions and carrier absorption leads to limited broadband absorption efficiency in ceramics. Strategic design of structural units with tunable absorption and bandwidth is essential to overcome spectral limitations for broadband solar harvesting. This study establishes an engineering strategy that synergistically exploits cation disorder and Jahn‐Teller distortions in spinel to achieve enhanced absorption. Through strategic incorporation of [CuO 6 ] and [CuO 4 ] structural units into MgAl 2 O 4 , Mg 0.4 Cu 0.6 Al 2 O 4 achieves a remarkable solar absorptance of 94.9% over 0.2–8 µm and demonstrates impressive thermal stability with less than 1.5% absorptance loss after annealing at 1300 °C for 100 h. The enhanced absorption is attributed to Jahn‐Teller distortions in both [CuO 4 ] tetrahedra and [CuO 6 ] octahedra, which induce significant multiple splitting of Cu‐3d orbitals, enhancing electronic transitions and carrier absorption. The developed material exhibits broadband solar absorptance, high‐temperature stability, and low density among oxide ceramics, making it a promising candidate for concentrated solar absorbers. These findings provide fundamental insights into the design of high‐performance solar absorbers through targeted manipulation of structural units and coordination environments.
- 29 December 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (1) , 94-104
Bond-Valence-Driven Model for Highest Infrared-Active Optical Phonon Frequency in Complex Oxides
The highest infrared-active optical phonon frequency (νmax) is a critical parameter governing infrared optical responses, thermal transport, and photon-phonon interactions in polar crystals. Despite their significance, current predictive methods still face challenges in accuracy, efficiency, and transferability across diverse material systems. We present a robust, physics-informed framework that synergizes bond valence theory with intrinsic crystallographic parameters to predict νmax accurately. Validated across more than 100 complex oxides and 12 doped material systems, the model achieves exceptional agreement with experimental and first-principles-calculated data. Furthermore, we extend our framework to account for temperature and doping effects, enabling the precise tuning of νmax through compositional engineering. Our model also shows predictability regarding infrared absorption edges, offering a direct pathway to design infrared-transparent materials with tailored transmission windows. This work provides a universal strategy for accelerating the discovery and optimization of advanced infrared optical materials, with broad applications in thermal management, photonics, and radiative coatings.
- 29 December 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (1) , 94-104
Bond-Valence-Driven Model for Highest Infrared-Active Optical Phonon Frequency in Complex Oxides
The highest infrared-active optical phonon frequency (νmax) is a critical parameter governing infrared optical responses, thermal transport, and photon-phonon interactions in polar crystals. Despite their significance, current predictive methods still face challenges in accuracy, efficiency, and transferability across diverse material systems. We present a robust, physics-informed framework that synergizes bond valence theory with intrinsic crystallographic parameters to predict νmax accurately. Validated across more than 100 complex oxides and 12 doped material systems, the model achieves exceptional agreement with experimental and first-principles-calculated data. Furthermore, we extend our framework to account for temperature and doping effects, enabling the precise tuning of νmax through compositional engineering. Our model also shows predictability regarding infrared absorption edges, offering a direct pathway to design infrared-transparent materials with tailored transmission windows. This work provides a universal strategy for accelerating the discovery and optimization of advanced infrared optical materials, with broad applications in thermal management, photonics, and radiative coatings.
- Open Access
- 31 May 2025
- Published by Springer Nature in npj Computational Materials
- Vol. 11 (1) , 1-9
Quantitative prediction of optical static refractive index in complex oxides
- 31 May 2025
- Published by Springer Nature in npj Computational Materials
- Vol. 11 (1) , 1-9
Open AccessQuantitative prediction of optical static refractive index in complex oxides
- 21 February 2025
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 45 (10)
Effect of doping-induced MnO6 distortion on the phase transition temperature and emissivity of LaMnO3-based materials
- 21 February 2025
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 45 (10)
Effect of doping-induced MnO6 distortion on the phase transition temperature and emissivity of LaMnO3-based materials
- Top Cited Papers
- 7 January 2025
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 8 (1) , 1-13
Zirconia submicrosphere/potassium silicate metacoating with high irradiation stability for radiative cooling
- 7 January 2025
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 8 (1) , 1-13
Top Cited PapersZirconia submicrosphere/potassium silicate metacoating with high irradiation stability for radiative cooling
- 21 December 2024
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 8 (1) , 1-32
Metal-organic framework derived carbon-based composites for high-performance microwave absorption
- 21 December 2024
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 8 (1) , 1-32
Metal-organic framework derived carbon-based composites for high-performance microwave absorption
- 9 October 2024
- Published by IOP Publishing in Chinese Physics B
- Vol. 33 (12)
A comprehensive study on optical properties of La2O3 and HfO2 for radiative cooling via multiscale simulations
Radiative cooling materials have gained prominence as a zero-energy solution to mitigate global warming. However, a comprehensive understanding of atomic-scale optical properties and macroscopic optical performance of radiative cooling materials remains elusive, limiting insights into the underlying physics of their optical response and cooling efficacy. La2O3 and HfO2, representing rare earth and third/fourth subgroup inorganic oxides respectively, which show promise for radiative cooling applications. In this work, we employed multiscale simulations to investigate the optical properties of La2O3 and HfO2 across a broad spectrum. First-principles calculations revealed their dielectric functions and intrinsic refractive indices and the results indicated that the slightly smaller bandgap of La2O3 compared to HfO2 induces a higher refractive index in the solar band. Additionally, three-phonon scattering was found to provide more accurate infrared optical properties than two-phonon scattering, which enhances the emissivity in the sky window. Monte Carlo simulations were also used to determine the macroscopic optical properties of La2O3 and HfO2 coatings. Based on simulated results, we identified that particle size and particle volume fraction play the dominant role in optical properties. Our findings underscore the potential of La2O3 and HfO2 nanocomposites for environmentally friendly cooling and offer a new approach for high-throughput screening of optical materials through multiscale simulations.
- 9 October 2024
- Published by IOP Publishing in Chinese Physics B
- Vol. 33 (12)
A comprehensive study on optical properties of La2O3 and HfO2 for radiative cooling via multiscale simulations
Radiative cooling materials have gained prominence as a zero-energy solution to mitigate global warming. However, a comprehensive understanding of atomic-scale optical properties and macroscopic optical performance of radiative cooling materials remains elusive, limiting insights into the underlying physics of their optical response and cooling efficacy. La2O3 and HfO2, representing rare earth and third/fourth subgroup inorganic oxides respectively, which show promise for radiative cooling applications. In this work, we employed multiscale simulations to investigate the optical properties of La2O3 and HfO2 across a broad spectrum. First-principles calculations revealed their dielectric functions and intrinsic refractive indices and the results indicated that the slightly smaller bandgap of La2O3 compared to HfO2 induces a higher refractive index in the solar band. Additionally, three-phonon scattering was found to provide more accurate infrared optical properties than two-phonon scattering, which enhances the emissivity in the sky window. Monte Carlo simulations were also used to determine the macroscopic optical properties of La2O3 and HfO2 coatings. Based on simulated results, we identified that particle size and particle volume fraction play the dominant role in optical properties. Our findings underscore the potential of La2O3 and HfO2 nanocomposites for environmentally friendly cooling and offer a new approach for high-throughput screening of optical materials through multiscale simulations.