Enio Henrique Pires Da Silva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Enio Henrique Pires Da Silva has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Marcelo Leite Ribeiro
Aeronautical Engineering Department, São Carlos School of Engineering, University of São Paulo, São Carlos 13563-120, SP, Brazil
6 shared publications - Silvio de Barros
Federal Center for Technological Education Celso Suckow da Fonseca (CEFET/RJ), Rio De Janeiro 20271-110, Brazil
5 shared publications - André Costa Vieira
CMAST—Centre for Mechanical and Aerospace Science and Technologies, University of Beira Interior, Rua Marquês de Ávila e Bolama, 6201-001 Covilhã, Portugal
2 shared publications - João V. Barreto Netto
Aeronautical Engineering Department, São Carlos School of Engineering. Av. João Dagnone, 1100, São Carlos, SP 13563-120, Brazil
2 shared publications Pascal Casari
CNRS, GeM, UMR 6183 Nantes Université, Ecole Centrale Nantes Saint‐Nazaire France
2 shared publications- Pascal Casari
Nantes Université, École Centrale Nantes, CNRS, GeM, UMR 6183, F-44600 Saint-Nazaire, France
2 shared publications
Latest Publications
- Top Cited PapersOpen Access
- 15 April 2026
- Published by Elsevier in Mechanics of Materials
- Vol. 218
Fibre orientation-dependent damage modelling and experimental identification for 3D-printed continuous carbon fibre reinforced nylon composites
- 15 April 2026
- Published by Elsevier in Mechanics of Materials
- Vol. 218
Top Cited PapersOpen AccessFibre orientation-dependent damage modelling and experimental identification for 3D-printed continuous carbon fibre reinforced nylon composites
- 1 April 2025
- Published by Wiley in Polymer Engineering & Science
- Vol. 65 (6) , 3029-3045
Data generation and deep neural network predictions for aged mechanical properties
The aim of this work is the data generation of aged mechanical properties following the Arrhenius equation and large deformation theory for a transversely isotropic bio‐based polyurethane foam, and the application of this dataset in the training process of different deep neural network architectures to evaluate their capacity to predict the full stress–strain behavior of this material after being exposed to different temperatures and long periods of time. To investigate the transversely isotropic behavior, the mechanical properties were divided into two, longitudinal and transverse to the expansion direction, and a total of 4200 simulations with different temperature and age parameters were used in a UMAT subroutine calculating the stress by the Jaumann stress rate for logarithmic strain levels of up to 1.2 mm/mm. The strain level obtained by the simulation, as well as the material direction, temperature, and time of exposure were used as input parameters in the DNN, with the output being stress level, yield strength, and stiffness. Tensorflow library was used to model the DNN with two and three hidden layers of depth and width varying from 128 to 1024 neurons. We also investigated the differences between using the ReLU and ELU activation functions in this problem. Our findings highlight the impressive predictive capabilities of DNNs, with the ReLU‐512‐512‐512 architecture demonstrating superior performance in terms of accuracy and computational efficiency, reaching error values for the stress prediction of 5.5 kPa. Overall, this research underscores the potential of DNNs as a cost‐effective and efficient tool for predicting material behavior, offering valuable insights for researchers and engineers across various fields. Highlights: We created and validated thousands of simulations of aged stress–strain curves. We made our simulation dataset available. We evaluated varied network architectures and functions and ranked the best for our case. We validated predictions against simulations and experiments. We demonstrated DNNs' efficacy in predicting aged mechanical properties.
- 1 April 2025
- Published by Wiley in Polymer Engineering & Science
- Vol. 65 (6) , 3029-3045
Data generation and deep neural network predictions for aged mechanical properties
The aim of this work is the data generation of aged mechanical properties following the Arrhenius equation and large deformation theory for a transversely isotropic bio‐based polyurethane foam, and the application of this dataset in the training process of different deep neural network architectures to evaluate their capacity to predict the full stress–strain behavior of this material after being exposed to different temperatures and long periods of time. To investigate the transversely isotropic behavior, the mechanical properties were divided into two, longitudinal and transverse to the expansion direction, and a total of 4200 simulations with different temperature and age parameters were used in a UMAT subroutine calculating the stress by the Jaumann stress rate for logarithmic strain levels of up to 1.2 mm/mm. The strain level obtained by the simulation, as well as the material direction, temperature, and time of exposure were used as input parameters in the DNN, with the output being stress level, yield strength, and stiffness. Tensorflow library was used to model the DNN with two and three hidden layers of depth and width varying from 128 to 1024 neurons. We also investigated the differences between using the ReLU and ELU activation functions in this problem. Our findings highlight the impressive predictive capabilities of DNNs, with the ReLU‐512‐512‐512 architecture demonstrating superior performance in terms of accuracy and computational efficiency, reaching error values for the stress prediction of 5.5 kPa. Overall, this research underscores the potential of DNNs as a cost‐effective and efficient tool for predicting material behavior, offering valuable insights for researchers and engineers across various fields. Highlights: We created and validated thousands of simulations of aged stress–strain curves. We made our simulation dataset available. We evaluated varied network architectures and functions and ranked the best for our case. We validated predictions against simulations and experiments. We demonstrated DNNs' efficacy in predicting aged mechanical properties.
- Open Access
- 20 November 2024
- Published by Elsevier in Data in Brief
- Vol. 57, 111149
Raw dataset of tensile tests in a 3D-printed nylon reinforced with oriented short carbon fibers
- 20 November 2024
- Published by Elsevier in Data in Brief
- Vol. 57, 111149
Open AccessRaw dataset of tensile tests in a 3D-printed nylon reinforced with oriented short carbon fibers
- 22 March 2024
- Published by Wiley in Polymer Engineering & Science
- Vol. 64 (6) , 2778-2794
Aging properties of a vegetable‐based polyurethane foam under high relative humidity and different temperatures
The objective of this study is to assess, characterize, and forecast the aging effects on the mechanical properties of a vegetable‐based polyurethane foam (PUF) derived from castor oil under elevated relative humidity conditions and at two distinct load orientations (aligned with the expansion direction and perpendicular to it). Ten specimens were subjected to temperatures of 60, 75, and 90°C, along with a relative humidity of 90%, for a duration of up to 60 days. Compression tests, following ASTM D1621‐16 standards and supplemented by 3D digital image correlation, revealed nearly isotropic behavior with marginally lower compression strength in the expansion direction. On the other hand, the strength of the foams at 90°C was higher in that direction. This led to a smaller activation energy (Ea) in this property, which ended up showing a shorter lifespan prediction considering the strength retention in this direction. The stiffness values were proportionally more similar in both directions than the strength ones and this was observed in the Ea for those curves. In contrast to several other foams and polyurethanes, the one examined in this study exhibited consistently higher Ea values for its mechanical properties, particularly in the transverse direction to expansion, surpassing 94 kJ/mol. This indicates a robust diffusion and chemical stability, suggesting its potential for prolonged utilization compared to conventional oil‐based foams. A prediction was made that this foam would lose 50% of its stiffness and strength in around 9.8 and 9.5 years at 20°C, respectively, considering the directions more sensitive to the aging process. This research offers valuable insights for predicting lifespan based on operating temperatures and property retention needs, contributing to the advancement of sustainable materials in structural applications.Highlights: Fifty specimens investigated for each of two directions. Evaluation of vegetable‐based PUF aging process unveils density changes. Unique behavior noted: different Ea values for each direction. High Ea values indicate enhanced mechanical stability over oil‐based foams. Lifespan prediction enhances material application prospects.
- 22 March 2024
- Published by Wiley in Polymer Engineering & Science
- Vol. 64 (6) , 2778-2794
Aging properties of a vegetable‐based polyurethane foam under high relative humidity and different temperatures
The objective of this study is to assess, characterize, and forecast the aging effects on the mechanical properties of a vegetable‐based polyurethane foam (PUF) derived from castor oil under elevated relative humidity conditions and at two distinct load orientations (aligned with the expansion direction and perpendicular to it). Ten specimens were subjected to temperatures of 60, 75, and 90°C, along with a relative humidity of 90%, for a duration of up to 60 days. Compression tests, following ASTM D1621‐16 standards and supplemented by 3D digital image correlation, revealed nearly isotropic behavior with marginally lower compression strength in the expansion direction. On the other hand, the strength of the foams at 90°C was higher in that direction. This led to a smaller activation energy (Ea) in this property, which ended up showing a shorter lifespan prediction considering the strength retention in this direction. The stiffness values were proportionally more similar in both directions than the strength ones and this was observed in the Ea for those curves. In contrast to several other foams and polyurethanes, the one examined in this study exhibited consistently higher Ea values for its mechanical properties, particularly in the transverse direction to expansion, surpassing 94 kJ/mol. This indicates a robust diffusion and chemical stability, suggesting its potential for prolonged utilization compared to conventional oil‐based foams. A prediction was made that this foam would lose 50% of its stiffness and strength in around 9.8 and 9.5 years at 20°C, respectively, considering the directions more sensitive to the aging process. This research offers valuable insights for predicting lifespan based on operating temperatures and property retention needs, contributing to the advancement of sustainable materials in structural applications.Highlights: Fifty specimens investigated for each of two directions. Evaluation of vegetable‐based PUF aging process unveils density changes. Unique behavior noted: different Ea values for each direction. High Ea values indicate enhanced mechanical stability over oil‐based foams. Lifespan prediction enhances material application prospects.
- Open Access
- 15 February 2024
- Published by Elsevier in Data in Brief
- Vol. 53, 110199
Raw dataset of compression tests on a vegetable oil-based polyurethane foam exposed to different ageing conditions
- 15 February 2024
- Published by Elsevier in Data in Brief
- Vol. 53, 110199
Open AccessRaw dataset of compression tests on a vegetable oil-based polyurethane foam exposed to different ageing conditions
- Open Access
- 8 November 2023
- Published by Elsevier in International Journal of Adhesion and Adhesives
- Vol. 129
Experimental evaluation of interface adhesion of a flax fiber composite patch with epoxy and polyurethane adhesives for the reinforcement of steel structures
- 8 November 2023
- Published by Elsevier in International Journal of Adhesion and Adhesives
- Vol. 129
Open AccessExperimental evaluation of interface adhesion of a flax fiber composite patch with epoxy and polyurethane adhesives for the reinforcement of steel structures
- Open Access
Numerical Approach to Simulate the Mechanical Behavior of Biodegradable Polymers during Erosion
Biodegradable polymers find applications in many market segments. The ability to meet mechanical requirements within a certain time range, after which it degrades and is naturally absorbed, can be used to produce short-term use products that can be easily disposable with less environmental impact. In the segment of medical devices used in regenerative medicine, these materials are used to produce temporary implants that are naturally assimilated by the human body, avoiding a removal surgery. However, the design of these temporary devices still presents great challenges, namely in the verification of the main requirement: the lifetime of the device, associated with the progressive loss of mechanical properties, until its complete erosion and assimilation. Thus, in this study, a numerical approach is proposed to simulate the polymeric device’s mechanical behavior during its hydrolytic degradation by combining the hydrolysis kinetics, that depends on mechanical factors and promotes a decrease of molecular weight and consequent decrease of mechanical performance, and erosion, when molecular weight reaches a threshold value and the polymer becomes soluble and diffuses outward, resulting in mass loss and decreasing cross-sectional area, which also contributes to the mechanical performance reduction of the device. A phenomenological approach, using the combination of continuum-based hydrolytic damage for the evolution of mechanical properties that depends on the stress field and further removal of the degraded element (to simulate mass loss) was used. Both elastoplastic and hyperelastic constitutive models were applied on this study, where the material model parameters locally depend on the molecular weight.
Open AccessNumerical Approach to Simulate the Mechanical Behavior of Biodegradable Polymers during Erosion
Biodegradable polymers find applications in many market segments. The ability to meet mechanical requirements within a certain time range, after which it degrades and is naturally absorbed, can be used to produce short-term use products that can be easily disposable with less environmental impact. In the segment of medical devices used in regenerative medicine, these materials are used to produce temporary implants that are naturally assimilated by the human body, avoiding a removal surgery. However, the design of these temporary devices still presents great challenges, namely in the verification of the main requirement: the lifetime of the device, associated with the progressive loss of mechanical properties, until its complete erosion and assimilation. Thus, in this study, a numerical approach is proposed to simulate the polymeric device’s mechanical behavior during its hydrolytic degradation by combining the hydrolysis kinetics, that depends on mechanical factors and promotes a decrease of molecular weight and consequent decrease of mechanical performance, and erosion, when molecular weight reaches a threshold value and the polymer becomes soluble and diffuses outward, resulting in mass loss and decreasing cross-sectional area, which also contributes to the mechanical performance reduction of the device. A phenomenological approach, using the combination of continuum-based hydrolytic damage for the evolution of mechanical properties that depends on the stress field and further removal of the degraded element (to simulate mass loss) was used. Both elastoplastic and hyperelastic constitutive models were applied on this study, where the material model parameters locally depend on the molecular weight.
- Open Access
Accelerated Aging on the Compression Properties of a Green Polyurethane Foam: Experimental and Numerical Analysis
The aim of this work is to evaluate the changes in compression properties of a bio-based polyurethane foam after exposure to 90 °C for different periods of time, and to propose a method to extrapolate these results and use a numerical approach to predict the compression behaviour after degradation for untested conditions at different degradation times and temperatures. Bio-based polymers are an important sustainable alternative to oil-based materials. This is explained by the foaming process and the density along the material as it was possible to see in a digital image correlation analysis. After 60 days, stiffness was approximately decreased by half in both directions. The decrease in yield stress due to thermo-oxidative degradation had a minor effect in the foaming directions, changing from 352 kPa to 220 kPa after 60 days, and the transverse property was harshly impacted changing from 530 kPa to 265 kPa. The energy absorption efficiency was slightly affected by degradation. The simulation of the compression stress-strain curves were in accordance to the experimental data and made it possible to predict the changes in mechanical properties for intermediate periods of degradation time. The plateau stress for the unaged foam transverse to the foaming direction presented experimental and numerical values of 450 kPa and 470 kPa, respectively. In addition, the plateau stresses in specimens degraded for 40 days present very similar experimental and numerical results in the same direction, at 310 kPa and 300 kPa, respectively. Therefore, this paper presents important information regarding the life-span and degradation of a green PUF. It provides insights into how compression properties vary along degradation time as function of material operation temperature, according to the Arrhenius degradation equation.
Open AccessAccelerated Aging on the Compression Properties of a Green Polyurethane Foam: Experimental and Numerical Analysis
The aim of this work is to evaluate the changes in compression properties of a bio-based polyurethane foam after exposure to 90 °C for different periods of time, and to propose a method to extrapolate these results and use a numerical approach to predict the compression behaviour after degradation for untested conditions at different degradation times and temperatures. Bio-based polymers are an important sustainable alternative to oil-based materials. This is explained by the foaming process and the density along the material as it was possible to see in a digital image correlation analysis. After 60 days, stiffness was approximately decreased by half in both directions. The decrease in yield stress due to thermo-oxidative degradation had a minor effect in the foaming directions, changing from 352 kPa to 220 kPa after 60 days, and the transverse property was harshly impacted changing from 530 kPa to 265 kPa. The energy absorption efficiency was slightly affected by degradation. The simulation of the compression stress-strain curves were in accordance to the experimental data and made it possible to predict the changes in mechanical properties for intermediate periods of degradation time. The plateau stress for the unaged foam transverse to the foaming direction presented experimental and numerical values of 450 kPa and 470 kPa, respectively. In addition, the plateau stresses in specimens degraded for 40 days present very similar experimental and numerical results in the same direction, at 310 kPa and 300 kPa, respectively. Therefore, this paper presents important information regarding the life-span and degradation of a green PUF. It provides insights into how compression properties vary along degradation time as function of material operation temperature, according to the Arrhenius degradation equation.
- 4 March 2021
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 55 (21) , 2857-2866
Structural and mechanical characterization of polyurethane-CaCO3 composites synthesized at high calcium carbonate loading: An experimental and theoretical study
Due to its exceptional biocompatibility, Polyurethane (PU) reinforced with calcium carbonate (CaCO3) is a composite material with significant biomedical applications. However, much of the currently known mechanical and chemical information regarding composites has been obtained at low and moderate CaCO3 content levels. This study employs experimental and theoretical tools to evaluate the structural, morphological, and mechanical properties of pristine polyurethane, and when doped with CaCO3 at 25 and 50 wt.%. In the experiments the samples are characterized using X-ray diffraction (XRD), infrared spectrophotometry (FT-IR), scanning electron microscopy (SEM), and tensile and flexural mechanical tests, while theoretical calculations are performed to evaluate the carbonate-polymer interaction. The XRD and FT-IR results indicate that CaCO3 is at the calcite phase and that PU-CaCO3 materials exhibit a broadening of bands related to the NH2 group. This result is explained using theoretical calculations that demonstrate a weak interaction between those molecules with the CaCO3 surface, where the molecule-calcite interaction occurs primarily through the NH2 molecular link. With respect to mechanical behaviour, the results show less fracture resistance and greater stiffness for the materials containing CaCO3, compared to those containing only PU. These results are explained in terms of the stress concentration due to CaCO3 within the polymer. Finally, the results detailed in this paper show that a high calcium carbonate loading is suitable for increasing the rigidity and decreasing the fracture toughness of the biomaterial, in association with a reduction of the plastic region.
- 4 March 2021
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 55 (21) , 2857-2866
Structural and mechanical characterization of polyurethane-CaCO3 composites synthesized at high calcium carbonate loading: An experimental and theoretical study
Due to its exceptional biocompatibility, Polyurethane (PU) reinforced with calcium carbonate (CaCO3) is a composite material with significant biomedical applications. However, much of the currently known mechanical and chemical information regarding composites has been obtained at low and moderate CaCO3 content levels. This study employs experimental and theoretical tools to evaluate the structural, morphological, and mechanical properties of pristine polyurethane, and when doped with CaCO3 at 25 and 50 wt.%. In the experiments the samples are characterized using X-ray diffraction (XRD), infrared spectrophotometry (FT-IR), scanning electron microscopy (SEM), and tensile and flexural mechanical tests, while theoretical calculations are performed to evaluate the carbonate-polymer interaction. The XRD and FT-IR results indicate that CaCO3 is at the calcite phase and that PU-CaCO3 materials exhibit a broadening of bands related to the NH2 group. This result is explained using theoretical calculations that demonstrate a weak interaction between those molecules with the CaCO3 surface, where the molecule-calcite interaction occurs primarily through the NH2 molecular link. With respect to mechanical behaviour, the results show less fracture resistance and greater stiffness for the materials containing CaCO3, compared to those containing only PU. These results are explained in terms of the stress concentration due to CaCO3 within the polymer. Finally, the results detailed in this paper show that a high calcium carbonate loading is suitable for increasing the rigidity and decreasing the fracture toughness of the biomaterial, in association with a reduction of the plastic region.