Lorenzo Bergonzi
Research Subjects
Lorenzo Bergonzi has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
Alessandro Pirondi
Universitá degli studi di Parma, Via Universitá 12, 43121 Parma, Italy
3 shared publicationsMatteo Vettori
MaCh3D srl, Strada S. Nicoló 19, 43126 Parma, Italy
3 shared publicationsFabrizio Moroni
Universitá degli studi di Parma, Via Universitá 12, 43121 Parma, Italy
2 shared publicationsM Vettori
MaCh3D srl, V.Le Duca Alessandro 42, 43121 Parma, Italy
2 shared publicationsA Pirondi
Dipartimento di Ingegneria e Architettura, Università di Parma, Parco area delle Scienze 181/A, 43124 Parma, Italy
1 shared publication- Andrea Zappettini
Istituto Materiali per l’Elettronica e il Magnetismo, Consiglio Nazionale delle Ricerche, Parco Area delle Scienze 37/A, 43124 Parma, Italy
1 shared publication
Latest Publications
- Open Access
3D Printed Masks for Powders and Viruses Safety Protection Using Food Grade Polymers: Empirical Tests
The production of 3D printed safety protection devices (SPD) requires particular attention to the material selection and to the evaluation of mechanical resistance, biological safety and surface roughness related to the accumulation of bacteria and viruses. We explored the possibility to adopt additive manufacturing technologies for the production of respirator masks, responding to the sudden demand of SPDs caused by the emergency scenario of the pandemic spread of SARS-COV-2. In this study, we developed different prototypes of masks, exclusively applying basic additive manufacturing technologies like fused deposition modeling (FDM) and droplet-based precision extrusion deposition (db-PED) to common food packaging materials. We analyzed the resulting mechanical characteristics, biological safety (cell adhesion and viability), surface roughness and resistance to dissolution, before and after the cleaning and disinfection phases. We showed that masks 3D printed with home-grade printing equipment have similar performances compared to the industrial-grade ones, and furthermore we obtained a perfect face fit by customizing their shape. Finally, we developed novel approaches to the additive manufacturing post-processing phases essential to assure human safety in the production of 3D printed custom medical devices.
Open Access3D Printed Masks for Powders and Viruses Safety Protection Using Food Grade Polymers: Empirical Tests
The production of 3D printed safety protection devices (SPD) requires particular attention to the material selection and to the evaluation of mechanical resistance, biological safety and surface roughness related to the accumulation of bacteria and viruses. We explored the possibility to adopt additive manufacturing technologies for the production of respirator masks, responding to the sudden demand of SPDs caused by the emergency scenario of the pandemic spread of SARS-COV-2. In this study, we developed different prototypes of masks, exclusively applying basic additive manufacturing technologies like fused deposition modeling (FDM) and droplet-based precision extrusion deposition (db-PED) to common food packaging materials. We analyzed the resulting mechanical characteristics, biological safety (cell adhesion and viability), surface roughness and resistance to dissolution, before and after the cleaning and disinfection phases. We showed that masks 3D printed with home-grade printing equipment have similar performances compared to the industrial-grade ones, and furthermore we obtained a perfect face fit by customizing their shape. Finally, we developed novel approaches to the additive manufacturing post-processing phases essential to assure human safety in the production of 3D printed custom medical devices.
- Open Access
- 1 February 2021
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1038 (1) , 012071
Different infill geometry influence on mechanical properties of FDM produced PLA
Fused Deposition Modelling (FDM) is one of the most widespread additive manufacturing technologies due to its relatively low cost and simplicity. Usually, printed parts have an internal structure (infill) that is not produced with 100% material density. This strategy is adopted to save material and time thanks also to the fact that when a component is loaded, stress are concentrated on its skin rather than in the internal section. Furthermore, infill structure can have different densities and topology. Slicer software have various configurations that can be exploited to produce internal structures: according to All3DP [1], some are intended for functional parts while others are more indicated to prototypes only. Aim of this work, is to compare the effect of different infill topologies produced using Ultimaker CURA [2] slicing software on material mechanical properties. Preliminary experimental activity has been carried out in order to determine the most suitable printing temperature. MaCh3D, an innovative miniaturized universal testing machine [3] was used to perform uniaxial tensile tests. Results underline the difference between different kind of infill in term of mechanical properties, given the same infill density across all specimens. Additionally, in order to evaluate infill percentage effect on mechanical properties, some of the most performing infill from the characterisation activity have been selected and specimens produced with 20%, 50%, 80% infill percentage. In the end, both infill topology as well as density impacts on mechanical properties.
- 1 February 2021
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1038 (1) , 012071
Open AccessDifferent infill geometry influence on mechanical properties of FDM produced PLA
Fused Deposition Modelling (FDM) is one of the most widespread additive manufacturing technologies due to its relatively low cost and simplicity. Usually, printed parts have an internal structure (infill) that is not produced with 100% material density. This strategy is adopted to save material and time thanks also to the fact that when a component is loaded, stress are concentrated on its skin rather than in the internal section. Furthermore, infill structure can have different densities and topology. Slicer software have various configurations that can be exploited to produce internal structures: according to All3DP [1], some are intended for functional parts while others are more indicated to prototypes only. Aim of this work, is to compare the effect of different infill topologies produced using Ultimaker CURA [2] slicing software on material mechanical properties. Preliminary experimental activity has been carried out in order to determine the most suitable printing temperature. MaCh3D, an innovative miniaturized universal testing machine [3] was used to perform uniaxial tensile tests. Results underline the difference between different kind of infill in term of mechanical properties, given the same infill density across all specimens. Additionally, in order to evaluate infill percentage effect on mechanical properties, some of the most performing infill from the characterisation activity have been selected and specimens produced with 20%, 50%, 80% infill percentage. In the end, both infill topology as well as density impacts on mechanical properties.
- Open Access
- 1 February 2021
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1038 (1) , 012070
Experimental validation of miniaturized specimen developed to perform uniaxial tensile test on high performance materials
This work deals with the experimental validation of the proposed specimens geometries which design process through Finite Element Method was presented during AIAS 2019 and published afterwards [1]. In particular, non-conventional miniaturized specimen geometry compliant to ASTM E8 and ISO 6892, specifically developed to work with MaCh3D [2], an innovative miniaturized tensile testing machine, were considered. The size-reduction of specimens is advantageous both in terms of material and equipment: smaller specimens require lower forces to be broken, hence a compact tensile testing machine can perform the mechanical characterization activity. In this experimental validation, mechanical properties determined using the three proposed MaCh3D miniaturized specimens are compared to full-size ISO 6892 samples. Specimens were cut from AISI 304 stainless steel plates, with different thickness according to specimens requirements. Good accordance has been found between the standard and non-standard geometries.
- 1 February 2021
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1038 (1) , 012070
Open AccessExperimental validation of miniaturized specimen developed to perform uniaxial tensile test on high performance materials
This work deals with the experimental validation of the proposed specimens geometries which design process through Finite Element Method was presented during AIAS 2019 and published afterwards [1]. In particular, non-conventional miniaturized specimen geometry compliant to ASTM E8 and ISO 6892, specifically developed to work with MaCh3D [2], an innovative miniaturized tensile testing machine, were considered. The size-reduction of specimens is advantageous both in terms of material and equipment: smaller specimens require lower forces to be broken, hence a compact tensile testing machine can perform the mechanical characterization activity. In this experimental validation, mechanical properties determined using the three proposed MaCh3D miniaturized specimens are compared to full-size ISO 6892 samples. Specimens were cut from AISI 304 stainless steel plates, with different thickness according to specimens requirements. Good accordance has been found between the standard and non-standard geometries.
- Open Access
- 6 December 2019
- Published by Czech Technical University in Prague - Central Library in Acta Polytechnica CTU Proceedings
- Vol. 25, 41-47
ADDITIVE MANUFACTURING PROCESS PARAMETER INFLUENCE ON MECHANICAL STRENGTH OF ADHESIVE JOINTS, PRELIMINARY ACTIVITIES
The work illustrates how building parameters of the Additive Manufacturing process Fused Filament Fabrication can affect not only the mechanical properties but also the surface wettability and morphology. Wettability and morphology are relevant factors in bonded joints performance. Advantages of polymeric additive manufacturing are to allow a re-design of components with locally controlled properties and integrated functions. Major limitations are related to the lack of material testing standardization and constraints due to the build volume and to the object orientation for printability: the latter problem scan be addressed with the use of bonded joints that allow to create bigger assemblies from smaller parts optimally designed to take advantage of material orthotropy and without the structural drawbacks. In this study, two materials are considered, acrylonitrile butadiene styrene and polylactideacid. Wettability, surface morphology and mechanical strength have been determined at different combinations of nozzle temperature, print speed and layer thickness.
- 6 December 2019
- Published by Czech Technical University in Prague - Central Library in Acta Polytechnica CTU Proceedings
- Vol. 25, 41-47
Open AccessADDITIVE MANUFACTURING PROCESS PARAMETER INFLUENCE ON MECHANICAL STRENGTH OF ADHESIVE JOINTS, PRELIMINARY ACTIVITIES
The work illustrates how building parameters of the Additive Manufacturing process Fused Filament Fabrication can affect not only the mechanical properties but also the surface wettability and morphology. Wettability and morphology are relevant factors in bonded joints performance. Advantages of polymeric additive manufacturing are to allow a re-design of components with locally controlled properties and integrated functions. Major limitations are related to the lack of material testing standardization and constraints due to the build volume and to the object orientation for printability: the latter problem scan be addressed with the use of bonded joints that allow to create bigger assemblies from smaller parts optimally designed to take advantage of material orthotropy and without the structural drawbacks. In this study, two materials are considered, acrylonitrile butadiene styrene and polylactideacid. Wettability, surface morphology and mechanical strength have been determined at different combinations of nozzle temperature, print speed and layer thickness.
- Open Access
- 1 January 2019
- Published by Elsevier in Procedia Structural Integrity
- Vol. 24, 213-224
Development of a miniaturized specimen to perform uniaxial tensile tests on high performance materials
- 1 January 2019
- Published by Elsevier in Procedia Structural Integrity
- Vol. 24, 213-224
Open AccessDevelopment of a miniaturized specimen to perform uniaxial tensile tests on high performance materials
- Open Access
- 4 December 2018
- Published by Elsevier in Procedia Structural Integrity
- Vol. 12, 392-403
Numerical and experimental validation of a non-standard specimen for uniaxial tensile test
- 4 December 2018
- Published by Elsevier in Procedia Structural Integrity
- Vol. 12, 392-403
Open AccessNumerical and experimental validation of a non-standard specimen for uniaxial tensile test