AWAndreas Wohninsland

Andreas Wohninsland

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Andreas Wohninsland has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Enhancing material performance by controlling retained austenite in laser powder bed fused 17-4PH steel

    by Niklas Weber, Andreas Wohninsland, Jakob Huber, Till Tetzlaff, Aron Pfaff

    Retained austenite is a fundamental factor in steels, capable of transforming to martensite under load, thus enhancing strength and ductility through TRIP effects (TRansformation Induced Plasticity). This study investigates the influence of nitrogen concentration (0.0081 to 1.58 wt.%) and normalized energy density (3.13 to 21.95) on retained austenite content in laser powder bed fused 17-4PH steel. Our findings demonstrate that higher nitrogen levels and lower energy densities significantly increase retained austenite fractions, achieving a range in measured austenite fraction of 1.40 % to 98.60 %. Conventional methods of measuring retained austenite using mechanical polishing can distort results due to unintended deformation-induced martensite. Therefore, we present a special magnetization measurement setup that characterizes the phase composition by differentiating the magnetization of body-centered (e.g., martensite, ferrite) and non-magnetic, face-centered crystal structures (e.g., austenite), validated by X-ray diffraction, thereby accurately characterizing phase compositions and overcoming limitations of traditional methods. The presence of metastable austenite correlates with substantial enhancements in mechanical properties, evidenced by an ultimate tensile strength (UTS) increase from 898 to 1131 MPa and improvements in elongation at break from 14.8% to 24.6%. This novel systematic exploration of the interplay between nitrogen concentration and energy density marks a significant advancement in controlling material properties of laser powder bed fused 17-4PH steel, highlighting the potential for tailored applications, such as in high-energy absorption contexts. Graphical abstract


  • Texture-based ferroelectric hardening in Na1/2Bi1/2TiO3 -based piezoceramics

    by Daniel Bremecker, Andreas Wohninsland, Siegfried Teuber, K. V. Lalitha, Manuel Hinterstein, Jürgen Rödel

    Na1/2Bi1/2TiO3-based (NBT-based) ceramics offer a viable option to replace lead-based materials for high-power applications as they are characterized by a stable mechanical quality factor with increasing vibration velocity in comparison to lead-based piezoceramics. Recently, the minor and stable extrinsic contributions were revealed as the origin for the stability of the mechanical quality factor with increasing vibration velocity. This work identifies the very unusual high poling degree as cause for the small extrinsic contributions. To this end, complete pole figure densities have been quantified and correlated to the piezoelectric coefficient and electromechanical quality factor. This hypothesis is further strengthened by correlating the piezoelectric constant (sum of intrinsic and extrinsic contributions) with the remanent polarization (correlates to remanent texturing degree). In order to assess a full picture of NBT-based piezoceramics, 0.94Na1/2Bi1/2TiO3−0.06BaTiO3 has been considered with and without Zn doping and with quenching. It is compared to 0.79Na1/2Bi1/2TiO3−0.21K1/2Bi1/2TiO3 with and without Mg doping. Finally, a contrast to soft Pb(Zr1/2Ti1/2)O3 (PZT) flushes out the impact of domain wall motion on the piezoelectric coefficient and the electromechanical quality factor. Whereas a PZT-based reference material exhibits a linear increase in the piezoelectric constant with increasing remanent polarization, the NBT-based materials deviate from the linear trend, indicating a decrease in extrinsic contributions.


  • Open Access

    Re-entrant relaxor ferroelectric behaviour in Nb-doped BiFeO3–BaTiO3 ceramics

    by Ziqi Yang, Bing Wang, Thomas Brown, Steven J. Milne, Antonio Feteira, Andreas Wohninsland, K. V. Lalitha, Yizhe Li, David A. Hall

    Re-entrant relaxor ferroelectric behaviour is identified in BiFeO3–BaTiO3 ceramics, yielding anomalous thermal variations in structural distortion and functional properties.


  • Nanoscale polar regions embedded within ferroelectric domains in Na1/2Bi1/2TiO3−BaTiO3

    by Ann-Katrin Fetzer, Andreas Wohninsland, K. V. Lalitha, Hans-Joachim Kleebe

    Relaxor ferroelectrics are an eminent group of functional materials, characterized by complex micro- and nanoscale structures, accounting for their enhanced piezoelectric properties. In the (1−x)Na1/2Bi1/2TiO3−xBaTiO3 (NBT-BT) solid solution, the evolution of nanoscale domains and their hierarchical association with ferroelectric domains is investigated using conventional and scanning transmission electron microscopy on compositions with 6, 9, and 12 mol % BT. Short-range fluctuations in the local polar displacement (polar nanoregions, PNRs) account for a heterogeneous nanostructure at the morphotropic phase boundary (6 mol % BT). Platelike nanodomains of tetragonal P4bm symmetry coexist with a minor volume fraction of rhombohedral R3c nanodomains. Their overall population decreases with increasing BT content. However, ferroelectric P4mm domains in the composition with 12 mol % BT still exhibit nanoscale regions, which deviate from the average polarization. Small volume fractions of both P4bm and R3c nanodomains remain embedded within the ferroelectric domains. This hierarchical domain configuration underpins the complex structural characteristics of NBT-based relaxor ferroelectrics.


  • Open Access

    Structural and microstructural description of relaxor-ferroelectric transition in quenched Na1/2Bi1/2TiO3BaTiO3

    by Andreas Wohninsland, Ann-Katrin Fetzer, Rachel Broughton, Jacob L. Jones, K.V. Lalitha


  • Open Access

    In situ hot‐stage TEM of the phase and domain evolution in quenched Na 1/2 Bi 1/2 TiO 3 –BaTiO 3

    by Ann‐Katrin Fetzer, Andreas Wohninsland, K.V. Lalitha, Hans‐Joachim Kleebe

    Quenching relaxor ferroelectric 0.94(Na 1/2 Bi 1/2 )TiO 3 –0.06BaTiO 3 (NBT‐6BT) enhances the depolarization temperature ( T d ), linked to the stabilization of ferroelectric order. The thermal evolution of the domain structure and phase assemblage provides insights about the onset of ferroelectric order in quenched materials. Unpoled furnace cooled and quenched NBT‐6BT ceramics were studied using in situ temperature‐dependent transmission electron microscopy. The rhombohedral to tetragonal structural transition in furnace cooled and quenched samples occurs in a comparable temperature range of 120°C–220°C. While the tetragonal phase is characterized by polar nanoregions (PNRs) and no domain contrast in the furnace cooled state, the quenched composition exhibits an increased fraction of lamellar domains, which are partially stable up to 300°C, thus benefiting the delayed depolarization. This is further corroborated by the dielectric data indicating earlier freezing of PNR dynamics in the quenched state. The reversibility of the phase transition is demonstrated by successive cooling, where quenched NBT‐6BT features an increased grainy PNR contrast after the experiment, followed by a kinetically delayed coalescence of PNRs back into lamellar domains. This demonstrates that the stabilized ferroelectric state upon quenching is associated with the conversion of polar units on the nanometer scale into long‐range domain structures.


  • Open Access

    Domain structure and phase evolution in quenched and furnace cooled lead-free Na1/2Bi1/2TiO3–BaTiO3 ceramics

    by Ann-Katrin Fetzer, Andreas Wohninsland, Kathrin Hofmann, Oliver Clemens, Lalitha Kodumudi Venkataraman, Hans-Joachim Kleebe


  • Open Access

    Correlation between enhanced lattice distortion and volume fraction of polar nanoregions in quenched Na1/2Bi1/2TiO3–BaTiO3 ceramics

    by Andreas Wohninsland, Ann-Katrin Fetzer, Adeel Riaz, Hans-Joachim Kleebe, Jürgen Rödel, Lalitha Kodumudi Venkataraman

    Quenching has been established as a viable method to increase the depolarization temperature in (100-x) Na1/2Bi1/2TiO3–xBaTiO3 (NBT–xBT). The proposed hypothesis of a stabilized ferroelectric order would entail changes in the polarized volume. To this end, air-quenched and furnace cooled samples of four compositions of NBT–xBT with x = 3, 6, 9, and 12 mol. % BT were studied. Upon quenching, all the compositions demonstrate an increase in the ferroelectric to relaxor transition temperature, TF-R, by 23–44 °C and enhanced lattice distortion. Resonance frequency damping analysis was utilized to measure Young's modulus in the temperature range of 25 °C to 800 °C and to estimate the volume fraction of polar nanoregions using a composite model. Quenching leads to an 8% decrease in Young's modulus, but to an increase in the volume fraction of polar nanoregions by 12% at 300 °C for NBT-6BT. Transmission electron microscopy investigations of quenched NBT-6BT reveal a combination of lamellar domains and more homogenous areas with nanometer-sized domains. The existence of lamellar domains in quenched morphotropic phase boundary compositions together with enhanced lattice distortion and a decrease in dielectric frequency dispersion substantiate the premise of a stabilized ferroelectric order.