Takahito Otsuka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Takahito Otsuka has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Tomokatsu Hayakawa
Department of Life Science and Applied Chemistry, Nagoya Institute of Technology 6 , Nagoya 466-8555
4 shared publications - Dominique de Ligny
Department of Materials Science and Engineering, Institute of Glass and Ceramics, Friedrich-Alexander-Universität Erlangen-Nürnberg, Martensstrasse 5, 91058 Erlangen, Germany
3 shared publications Maria Rita Cicconi
Friedrich-Alexander-Universität Erlangen-Nürnberg, Department of Materials Science and Engineering, Institut für Glas und Keramik 2 , Martensstrasse 5, 91058 Erlangen, Germany
2 shared publications- Maria Rita Cicconi
Department of Materials Science and Engineering, Institute of Glass and Ceramics, Friedrich-Alexander-Universität Erlangen-Nürnberg, Martensstrasse 5, 91058 Erlangen, Germany
2 shared publications - Aadhitya Telakula Mahesh
Department of Materials Science and Engineering, Institut für Glas und Keramik, Friedrich-Alexander-Universität Erlangen-Nürnberg, 91058 Erlangen, Germany
1 shared publication Barbara Schroeder
Department Werkstoffwissenschaften Institut für Glas und Keramik Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU) Martenstrasse 5 91058 Erlangen Germany
1 shared publication
Latest Publications
- Open Access
Photoluminescence Study of Undoped and Eu-Doped Alkali-Niobate Aluminosilicate Glasses and Glass-Ceramics
In this study, the photoluminescence (PL) behavior of two aluminosilicate glass series containing alkali-niobates ranging from 0.4 to 20 mol% was investigated. The glasses exhibit an intense visible emission centered at ~18,400 cm−1 for the peralkaline series and at higher energies (~19,300 cm−1) for the metaluminous glasses. However, the photoluminescence emission intensity varies significantly with the niobate content and the bulk chemistry. PL and fluorescence lifetime measurements indicate that the broad emission bands result from the overlap of different niobate populations, whose distribution changes with niobate content. The distinct PL behavior in the two glass series was related to the structural evolution of the niobate units upon niobium addition. An enhancement of the visible emission was observed for a higher fraction of distorted [NbO6] units. Eu-doping was carried out as a structural probe of the glass network, and also to determine if these glasses could be used as potential rare earth element (REE) activators. The crystal field strength around Eu ions is strongly dependent on the bulk chemistry and the niobate content. Furthermore, the peralkaline series showed energy transfer from the host [NbO6] to Eu3+, confirming the feasibility of exploring niobate glasses and glass-ceramics as lanthanide ion-activated luminescent materials. In addition, glass-ceramics (GCs) containing alkali-niobate phases with a perovskite-like structure were developed and studied to verify the optical performance of these materials. It was verified that the bulk chemistry influences crystallization behavior, and also the photoluminescence response. The transparent GC from the metaluminous series exhibits a quenching of the Eu3+ emission, whereas an enhanced emission intensity is observed for the peralkaline GC. The latter shows a strong excitation-dependent PL emission, suggesting energy transfer and migration of electronic excitation from one Eu population to another. Additionally, Eu3+ emissions arising from the and excited states were observed, highlighting the low phonon energy achievable in niobo-aluminosilicate hosts.Open AccessPhotoluminescence Study of Undoped and Eu-Doped Alkali-Niobate Aluminosilicate Glasses and Glass-Ceramics
In this study, the photoluminescence (PL) behavior of two aluminosilicate glass series containing alkali-niobates ranging from 0.4 to 20 mol% was investigated. The glasses exhibit an intense visible emission centered at ~18,400 cm−1 for the peralkaline series and at higher energies (~19,300 cm−1) for the metaluminous glasses. However, the photoluminescence emission intensity varies significantly with the niobate content and the bulk chemistry. PL and fluorescence lifetime measurements indicate that the broad emission bands result from the overlap of different niobate populations, whose distribution changes with niobate content. The distinct PL behavior in the two glass series was related to the structural evolution of the niobate units upon niobium addition. An enhancement of the visible emission was observed for a higher fraction of distorted [NbO6] units. Eu-doping was carried out as a structural probe of the glass network, and also to determine if these glasses could be used as potential rare earth element (REE) activators. The crystal field strength around Eu ions is strongly dependent on the bulk chemistry and the niobate content. Furthermore, the peralkaline series showed energy transfer from the host [NbO6] to Eu3+, confirming the feasibility of exploring niobate glasses and glass-ceramics as lanthanide ion-activated luminescent materials. In addition, glass-ceramics (GCs) containing alkali-niobate phases with a perovskite-like structure were developed and studied to verify the optical performance of these materials. It was verified that the bulk chemistry influences crystallization behavior, and also the photoluminescence response. The transparent GC from the metaluminous series exhibits a quenching of the Eu3+ emission, whereas an enhanced emission intensity is observed for the peralkaline GC. The latter shows a strong excitation-dependent PL emission, suggesting energy transfer and migration of electronic excitation from one Eu population to another. Additionally, Eu3+ emissions arising from the and excited states were observed, highlighting the low phonon energy achievable in niobo-aluminosilicate hosts. - Open Access
- 1 March 2024
- Published by AIP Publishing in APL Materials
- Vol. 12 (3)
Tuning the luminescence color of Eu3+- and alkali-ion-codoped Sr2CaWO6 orange-red phosphors: Eu3+ site distribution and site-selective photoluminescence studies
In this study, Eu3+- and alkali-ion (M+)-codoped Sr2CaWO6:x (Eu3+, M+) (x = 0.01–0.10) were synthesized via a solid-state reaction. The effects of different Sr/Ca ratios, types of monovalent metal ions (M+ = Na+, K+, and Li+), and doping concentrations were systematically investigated. The crystalline phase, photoluminescence (PL) properties, lattice site occupied by the Eu3+ ion, Eu3+ site distribution, and site-selective PL properties were evaluated by x-ray diffraction, PL/photoluminescence excitation (PLE) spectroscopy with a monochromatic light source, PL quantum efficiency (QE) measurements, and high-resolution PL/PLE spectroscopy with a wavelength-tunable laser. A dependence of the PL asymmetry ratio for the 5D0–7F1,2 transitions on the Sr/Ca ratio was identified and quantified for the first time. Based on the site-selective PL measurements, this behavior was ascribed to the enhancement of Eu3+ local distortion by Sr2+ substitution at the A site at lower Sr/Ca ratios (2). The PLE results provided insight into the Eu3+ site distribution, which explained the orange-red PL and PL QEs of the synthesized phosphors.
- 1 March 2024
- Published by AIP Publishing in APL Materials
- Vol. 12 (3)
Open AccessTuning the luminescence color of Eu3+- and alkali-ion-codoped Sr2CaWO6 orange-red phosphors: Eu3+ site distribution and site-selective photoluminescence studies
In this study, Eu3+- and alkali-ion (M+)-codoped Sr2CaWO6:x (Eu3+, M+) (x = 0.01–0.10) were synthesized via a solid-state reaction. The effects of different Sr/Ca ratios, types of monovalent metal ions (M+ = Na+, K+, and Li+), and doping concentrations were systematically investigated. The crystalline phase, photoluminescence (PL) properties, lattice site occupied by the Eu3+ ion, Eu3+ site distribution, and site-selective PL properties were evaluated by x-ray diffraction, PL/photoluminescence excitation (PLE) spectroscopy with a monochromatic light source, PL quantum efficiency (QE) measurements, and high-resolution PL/PLE spectroscopy with a wavelength-tunable laser. A dependence of the PL asymmetry ratio for the 5D0–7F1,2 transitions on the Sr/Ca ratio was identified and quantified for the first time. Based on the site-selective PL measurements, this behavior was ascribed to the enhancement of Eu3+ local distortion by Sr2+ substitution at the A site at lower Sr/Ca ratios (2). The PLE results provided insight into the Eu3+ site distribution, which explained the orange-red PL and PL QEs of the synthesized phosphors.
- 12 September 2023
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 18 (9)
Photoluminescence Color Prediction for Eu3+‐Doped Perovskite Red Phosphors Using Machine Learning
Currently, data‐driven approaches for exploring novel materials are garnering significant attention with the expectation of accelerating material development cycles and understanding materials from various aspects. This short article presents a supervised prediction model for the emission intensity ratio of 5D0–7F2 and 5D0–7F1 transition of Eu3+ ions, called an “asymmetry ratio”, which determines the color purity of the red region of Eu3+ photoluminescence in perovskite phosphors. The model is developed using a dataset of 296 samples and 203 descriptors for Eu3+‐doped perovskite. The accuracy of the prediction model trained by the dataset is statistically evaluated, which validates its sufficiently high prediction performance. Furthermore, the prediction model's performance is properly assessed by synthesizing a Eu3+‐doped NaLaInNbO6 compound, which is unknown as a red phosphor, and by comparing the experimental asymmetry ratio for this compound with that predicted by the predictor, which exhibits satisfactory agreement.
- 12 September 2023
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 18 (9)
Photoluminescence Color Prediction for Eu3+‐Doped Perovskite Red Phosphors Using Machine Learning
Currently, data‐driven approaches for exploring novel materials are garnering significant attention with the expectation of accelerating material development cycles and understanding materials from various aspects. This short article presents a supervised prediction model for the emission intensity ratio of 5D0–7F2 and 5D0–7F1 transition of Eu3+ ions, called an “asymmetry ratio”, which determines the color purity of the red region of Eu3+ photoluminescence in perovskite phosphors. The model is developed using a dataset of 296 samples and 203 descriptors for Eu3+‐doped perovskite. The accuracy of the prediction model trained by the dataset is statistically evaluated, which validates its sufficiently high prediction performance. Furthermore, the prediction model's performance is properly assessed by synthesizing a Eu3+‐doped NaLaInNbO6 compound, which is unknown as a red phosphor, and by comparing the experimental asymmetry ratio for this compound with that predicted by the predictor, which exhibits satisfactory agreement.
- 24 May 2022
- Published by Wiley in Physica Status Solidi (b)
- Vol. 259 (9)
93Nb NMR Study of (K, Na)NbO3‐Doped SiO2–Na2O–Al2O3 Glasses
Aluminosilicate glasses containing octahedral NbO6 units are developed for future applications as optical materials. Soda‐aluminosilicate glasses doped with Nb‐based alkaline perovskite crystals (K0.5Na0.5NbO3 [KNN]) at different doping levels (2–30 mol%) are studied by 93Nb nuclear magnetic resonance (NMR) spectroscopy. The Al2O3 concentration in the starting soda‐aluminosilicate glass matrix is varied from 5 to 17 mol% to investigate the influence of the composition of local Nb structures with 4–5, 6, and 7–8 fold‐oxygen coordination on the optical properties of the glasses. The chemical shifts are analyzed by comparison with the 93Nb NMR data of reference crystals, including KNN, to determine the feasibility of producing more NbO6 octahedra in the aluminosilicate glasses, where these octahedra are expected to promote the development of optically active Nb‐glass‐ceramics. The data show that both glass polymerization and KNN content influence the Nb local environment. Therefore, an appropriate amount of Al2O3 combined with an adequate doping level of the KNN perovskite is required to achieve the desired optical features. Contrary to expectations, a higher KNN doping level is achieved with the starting depolymerized soda‐aluminosilicate glass containing 5 mol% Al2O3, leading to perovskite‐like structures of NbO6 octahedra in the resultant glass system.
- 24 May 2022
- Published by Wiley in Physica Status Solidi (b)
- Vol. 259 (9)
93Nb NMR Study of (K, Na)NbO3‐Doped SiO2–Na2O–Al2O3 Glasses
Aluminosilicate glasses containing octahedral NbO6 units are developed for future applications as optical materials. Soda‐aluminosilicate glasses doped with Nb‐based alkaline perovskite crystals (K0.5Na0.5NbO3 [KNN]) at different doping levels (2–30 mol%) are studied by 93Nb nuclear magnetic resonance (NMR) spectroscopy. The Al2O3 concentration in the starting soda‐aluminosilicate glass matrix is varied from 5 to 17 mol% to investigate the influence of the composition of local Nb structures with 4–5, 6, and 7–8 fold‐oxygen coordination on the optical properties of the glasses. The chemical shifts are analyzed by comparison with the 93Nb NMR data of reference crystals, including KNN, to determine the feasibility of producing more NbO6 octahedra in the aluminosilicate glasses, where these octahedra are expected to promote the development of optically active Nb‐glass‐ceramics. The data show that both glass polymerization and KNN content influence the Nb local environment. Therefore, an appropriate amount of Al2O3 combined with an adequate doping level of the KNN perovskite is required to achieve the desired optical features. Contrary to expectations, a higher KNN doping level is achieved with the starting depolymerized soda‐aluminosilicate glass containing 5 mol% Al2O3, leading to perovskite‐like structures of NbO6 octahedra in the resultant glass system.
- Open Access
Thermal Evolutions to Glass-Ceramics Bearing Calcium Tungstate Crystals in Borate Glasses Doped with Photoluminescent Eu3+ Ions
Thermal evolutions of calcium-tungstate-borate glasses were investigated for the development of luminescent glass-ceramics by using Eu3+ dopant in a borate glass matrix with calcium tungstate, which was expected to have a combined character of glass and ceramics. This study revealed that single-phase precipitation of CaWO4 crystals in borate glass matrix was possible by heat-treatment at a temperature higher than glass transition temperature Tg for (100−x) (33CaO-67B2O3)−xCa3WO6 (x = 8−15 mol%). Additionally, the crystallization of CaWO4 was found by Raman spectroscopy due to the formation of W=O double bondings of WO4 tetrahedra in the pristine glass despite starting with the higher calcium content of Ca3WO6. Eu3+ ions were excluded from the CaWO4 crystals and positioned in the borate glass phase as a stable site for them, which provided local environments in higher symmetry around Eu3+ ions.
Open AccessThermal Evolutions to Glass-Ceramics Bearing Calcium Tungstate Crystals in Borate Glasses Doped with Photoluminescent Eu3+ Ions
Thermal evolutions of calcium-tungstate-borate glasses were investigated for the development of luminescent glass-ceramics by using Eu3+ dopant in a borate glass matrix with calcium tungstate, which was expected to have a combined character of glass and ceramics. This study revealed that single-phase precipitation of CaWO4 crystals in borate glass matrix was possible by heat-treatment at a temperature higher than glass transition temperature Tg for (100−x) (33CaO-67B2O3)−xCa3WO6 (x = 8−15 mol%). Additionally, the crystallization of CaWO4 was found by Raman spectroscopy due to the formation of W=O double bondings of WO4 tetrahedra in the pristine glass despite starting with the higher calcium content of Ca3WO6. Eu3+ ions were excluded from the CaWO4 crystals and positioned in the borate glass phase as a stable site for them, which provided local environments in higher symmetry around Eu3+ ions.