Erick Gabriel Ribeiro dos Anjos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Erick Gabriel Ribeiro dos Anjos has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
- Fabio Roberto Passador
Department of Science and Technology Federal University of São Paulo (UNIFESP) São José dos Campos São Paulo Brazil
10 shared publications - Mirabel Cerqueira Rezende
Universidade Federal de São Paulo, Brazil
4 shared publications - Uttandaraman Sundararaj
University of Calgary
4 shared publications - António Benjamim Mapossa
University of Calgary
3 shared publications - Juliano Marini
Universidade Federal de São Carlos, Brasil
3 shared publications - Larissa Stieven Montagna
Polymer and Biopolymer Technology Laboratory (TecPBio), Department of Science and Technology, Federal University of São Paulo (UNIFESP), 330 Talim St., São José dos Campos 12231-280, SP, Brazil
3 shared publications
Latest Publications
- Open Access
- 1 September 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (21) , 19700-19717
Multiscale PA6 Composites Reinforced With Recycled Carbon Fibers and Graphene: Synergistic Effects on Mechanical and Electromagnetic Behavior
The mechanical recycling of carbon fiber‐reinforced thermoplastics (CFRTs) generally degrades the mechanical properties of the resulting composites, primarily due to fiber length reduction. To partially overcome this limitation, this study developed multiscale polyamide 6 (PA6) composites containing mechanically recycled CFRTs (up to 20 wt%) and graphene nanoplatelets (GNPs, up to 5 wt%) through melt mixing, followed by extrusion and injection‐molding. Morphological and thermal analyses indicated that the two‐dimensional GNPs may act as physical bridges at the carbon fiber‐matrix interface. This multiscale filler system produced a synergistic mechanical response; the PA6/3GNP/20rCFRT composite achieved an ultimate tensile strength of 127 MPa and an elastic modulus of approximately 5 GPa, while theoretical models indicated a significant increase in the fiber efficiency factor. Furthermore, the multiscale architecture successfully imparted multifunctional electromagnetic properties. The multiscale composites achieved a total electromagnetic interference shielding effectiveness (EMI SE) of 20 dB, together with a promising reflection loss of −26 dB. These findings demonstrate that a multiscale filler system with GNPs provides an effective and scalable strategy for upcycling CFRT waste into advanced multifunctional structural and electromagnetic shielding materials.
- 1 September 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (21) , 19700-19717
Open AccessMultiscale PA6 Composites Reinforced With Recycled Carbon Fibers and Graphene: Synergistic Effects on Mechanical and Electromagnetic Behavior
The mechanical recycling of carbon fiber‐reinforced thermoplastics (CFRTs) generally degrades the mechanical properties of the resulting composites, primarily due to fiber length reduction. To partially overcome this limitation, this study developed multiscale polyamide 6 (PA6) composites containing mechanically recycled CFRTs (up to 20 wt%) and graphene nanoplatelets (GNPs, up to 5 wt%) through melt mixing, followed by extrusion and injection‐molding. Morphological and thermal analyses indicated that the two‐dimensional GNPs may act as physical bridges at the carbon fiber‐matrix interface. This multiscale filler system produced a synergistic mechanical response; the PA6/3GNP/20rCFRT composite achieved an ultimate tensile strength of 127 MPa and an elastic modulus of approximately 5 GPa, while theoretical models indicated a significant increase in the fiber efficiency factor. Furthermore, the multiscale architecture successfully imparted multifunctional electromagnetic properties. The multiscale composites achieved a total electromagnetic interference shielding effectiveness (EMI SE) of 20 dB, together with a promising reflection loss of −26 dB. These findings demonstrate that a multiscale filler system with GNPs provides an effective and scalable strategy for upcycling CFRT waste into advanced multifunctional structural and electromagnetic shielding materials.
- Open Access
- 30 July 2026
- Published by Elsevier in Journal of the Mechanical Behavior of Biomedical Materials
- Vol. 182
3D printed HA/GO/sodium alginate composite scaffolds with enhanced mechanical performance and antibacterial activity for bone repair
- 30 July 2026
- Published by Elsevier in Journal of the Mechanical Behavior of Biomedical Materials
- Vol. 182
Open Access3D printed HA/GO/sodium alginate composite scaffolds with enhanced mechanical performance and antibacterial activity for bone repair
- Open Access
- 2 June 2026
- Published by Elsevier in Next Materials
- Vol. 12
Valorization of Kraft lignin through microwave-assisted pyrolysis – Production of microporous activated carbon for sulfamethoxazole adsorption
- 2 June 2026
- Published by Elsevier in Next Materials
- Vol. 12
Open AccessValorization of Kraft lignin through microwave-assisted pyrolysis – Production of microporous activated carbon for sulfamethoxazole adsorption
- Open Access
- 21 January 2026
- Published by American Chemical Society (ACS) in ACS Polymers Au
- Vol. 6 (1) , 492-505
High-Performance Multifunctional rPA6/rCFRP/rGraphite Hybrid Composites from Recycled Industrial Waste
Environmental concerns and the global shift toward a more sustainable and circular economy have increased the demand for economically viable materials derived from industrial waste. In this study, high-value engineering materials discarded from different industries were repurposed to develop new multifunctional hybrid composites. The selected postindustrial waste included polyamide 6 (rPA6) from automotive plastic washers, recycled graphite (rGra), and recycled carbon fiber reinforced polymer (rCFRP) epoxy-based composites originating from the aerospace sector. These materials were separately ground using a knife mill and subsequently compounded via extrusion. The fillers (rGra and rCFRP) were incorporated individually and as hybrids (rCFRP:rGra, 1:1 wt %) at total loadings of 5, 10, and 20 wt % in the rPA6 matrix. The composites were characterized in terms of morphology, rheology, mechanical performance (tensile test), thermal behavior (differential scanning calorimetryDSC), electrical conductivity, and electromagnetic properties. The mechanical results revealed a notably high ultimate tensile strength of 126 MPa and an elastic modulus of 4.8 GPa for the rPA6/rCFRP (20 wt %) composition, suggesting strong interfacial adhesion promoted by secondary interactions between the epoxy resin coating on the rCFRP and the rPA6 matrix. Electrical conductivity measurements on composite films showed values from 10–5 to 10–1 S.cm–1 for the hybrid and rCFRP-filled compositions, indicating their potential for antistatic (anti-ESD) applications. Although rGra exhibited lower mechanical and electrical performance than rCFRP at the evaluated contents, it was less detrimental to processability, making the hybrid formulations more balanced candidates for real-world applications. Overall, this study demonstrates a promising strategy for upcycling industrial waste into high-value, multifunctional composites, thereby contributing to resource efficiency and waste minimization across various industrial sectors.
- 21 January 2026
- Published by American Chemical Society (ACS) in ACS Polymers Au
- Vol. 6 (1) , 492-505
Open AccessHigh-Performance Multifunctional rPA6/rCFRP/rGraphite Hybrid Composites from Recycled Industrial Waste
Environmental concerns and the global shift toward a more sustainable and circular economy have increased the demand for economically viable materials derived from industrial waste. In this study, high-value engineering materials discarded from different industries were repurposed to develop new multifunctional hybrid composites. The selected postindustrial waste included polyamide 6 (rPA6) from automotive plastic washers, recycled graphite (rGra), and recycled carbon fiber reinforced polymer (rCFRP) epoxy-based composites originating from the aerospace sector. These materials were separately ground using a knife mill and subsequently compounded via extrusion. The fillers (rGra and rCFRP) were incorporated individually and as hybrids (rCFRP:rGra, 1:1 wt %) at total loadings of 5, 10, and 20 wt % in the rPA6 matrix. The composites were characterized in terms of morphology, rheology, mechanical performance (tensile test), thermal behavior (differential scanning calorimetryDSC), electrical conductivity, and electromagnetic properties. The mechanical results revealed a notably high ultimate tensile strength of 126 MPa and an elastic modulus of 4.8 GPa for the rPA6/rCFRP (20 wt %) composition, suggesting strong interfacial adhesion promoted by secondary interactions between the epoxy resin coating on the rCFRP and the rPA6 matrix. Electrical conductivity measurements on composite films showed values from 10–5 to 10–1 S.cm–1 for the hybrid and rCFRP-filled compositions, indicating their potential for antistatic (anti-ESD) applications. Although rGra exhibited lower mechanical and electrical performance than rCFRP at the evaluated contents, it was less detrimental to processability, making the hybrid formulations more balanced candidates for real-world applications. Overall, this study demonstrates a promising strategy for upcycling industrial waste into high-value, multifunctional composites, thereby contributing to resource efficiency and waste minimization across various industrial sectors.
- Open Access
- 28 November 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (8)
Evaluation of Zinc Borate and Melamine Polyphosphate Synergy on the Rheological, Thermal, Mechanical, Dimensional, and Flame Retardant Performance of rLLDPE / CaCO 3 Composites for Pipes Applications
The use of recycled thermoplastics is crucial for addressing environmental challenges such as waste management and sustainability. Recent upcycling trends have focused on enhancing recycled materials for advanced applications, such as flame‐retardant pipes used in underground mining. To improve the flame‐retardant properties of recycled LLDPE (rLLDPE) and expand its potential applications, flame‐resistant rLLDPE/CaCO 3 composites containing melamine polyphosphate (MPP) and zinc borate (ZB) were developed using a melt‐mixing method. The contents of MPP and ZB in the polymer were varied at 5 and 10 wt% respectively, to evaluate their individual and combined effects. The results showed improvements in flame retardancy, with higher char content, leading to a considerable improvement in the Limiting Oxygen Index (LOI) from 18.2% for neat rLLDPE to 23.7% for the MPP/ZB combination, achieving a UL‐94 V‐1 rating. The rLLDPE/CaCO 3 /MPP5/ZB10 composite exhibited a 52% increase in elastic modulus and a 10% increase in tensile strength, along with low water absorption (< 0.07%) and good dimensional stability. The synergistic effect of MPP and ZB improved the flame‐retardant performance by forming a dense and compact physical barrier that stopped heat transmission and suppressed flame spread. This research contributes to the development of upcycled materials with enhanced flame‐retardant properties for industrial applications including pipe fabrication.
- 28 November 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (8)
Open AccessEvaluation of Zinc Borate and Melamine Polyphosphate Synergy on the Rheological, Thermal, Mechanical, Dimensional, and Flame Retardant Performance of rLLDPE / CaCO 3 Composites for Pipes Applications
The use of recycled thermoplastics is crucial for addressing environmental challenges such as waste management and sustainability. Recent upcycling trends have focused on enhancing recycled materials for advanced applications, such as flame‐retardant pipes used in underground mining. To improve the flame‐retardant properties of recycled LLDPE (rLLDPE) and expand its potential applications, flame‐resistant rLLDPE/CaCO 3 composites containing melamine polyphosphate (MPP) and zinc borate (ZB) were developed using a melt‐mixing method. The contents of MPP and ZB in the polymer were varied at 5 and 10 wt% respectively, to evaluate their individual and combined effects. The results showed improvements in flame retardancy, with higher char content, leading to a considerable improvement in the Limiting Oxygen Index (LOI) from 18.2% for neat rLLDPE to 23.7% for the MPP/ZB combination, achieving a UL‐94 V‐1 rating. The rLLDPE/CaCO 3 /MPP5/ZB10 composite exhibited a 52% increase in elastic modulus and a 10% increase in tensile strength, along with low water absorption (< 0.07%) and good dimensional stability. The synergistic effect of MPP and ZB improved the flame‐retardant performance by forming a dense and compact physical barrier that stopped heat transmission and suppressed flame spread. This research contributes to the development of upcycled materials with enhanced flame‐retardant properties for industrial applications including pipe fabrication.
- Open Access
Sustainable Fire-Resistant Materials: Recycled Polyethylene Composites with Non-Halogenated Intumescent Flame Retardants for Construction Applications
This study explores the development of sustainable fire-resistant composites using a blend of recycled linear low-density polyethylene (rLLDPE) and low-density polyethylene (rLDPE) for construction applications. The incorporation of non-halogenated intumescent flame retardants (IFRs), specifically ammonium polyphosphate (APP) and melamine polyphosphate (MPP), was shown to enhance the flame retardance, thermal stability, and mechanical performance of these recycled polymer blends. IFRs were introduced at 5 wt.% and 10 wt.% concentrations, and their effects were evaluated using limiting oxygen index (LOI) testing and thermogravimetric analysis (TGA). Results showed that 10 wt.% APP and a combination of 5 wt.% APP with 5 wt.% MPP increased LOI values from 18.5% (neat polymer blend) to 21.2% and 22.4%, respectively, demonstrating improved fire resistance. Enhanced char formation, facilitated by IFRs, contributes to superior thermal stability and fire protection. TGA results confirmed higher char yields, with the rLLDPE/rLDPE/MPP5/APP5 composition exhibiting the highest residue (3.00%), indicating a synergistic effect between APP and MPP. Rheological and mechanical analysis showed that APP had more impact on viscoelastic behavior, while the combination of IFRs provided balanced mechanical properties despite a slight reduction in tensile strength. This research highlights the potential of recycled polyethylene composites in promoting circular economy principles by developing sustainable, fire-resistant materials for the construction industry, reducing plastic waste, and enhancing the safety of recycled polymer-based applications.
Open AccessSustainable Fire-Resistant Materials: Recycled Polyethylene Composites with Non-Halogenated Intumescent Flame Retardants for Construction Applications
This study explores the development of sustainable fire-resistant composites using a blend of recycled linear low-density polyethylene (rLLDPE) and low-density polyethylene (rLDPE) for construction applications. The incorporation of non-halogenated intumescent flame retardants (IFRs), specifically ammonium polyphosphate (APP) and melamine polyphosphate (MPP), was shown to enhance the flame retardance, thermal stability, and mechanical performance of these recycled polymer blends. IFRs were introduced at 5 wt.% and 10 wt.% concentrations, and their effects were evaluated using limiting oxygen index (LOI) testing and thermogravimetric analysis (TGA). Results showed that 10 wt.% APP and a combination of 5 wt.% APP with 5 wt.% MPP increased LOI values from 18.5% (neat polymer blend) to 21.2% and 22.4%, respectively, demonstrating improved fire resistance. Enhanced char formation, facilitated by IFRs, contributes to superior thermal stability and fire protection. TGA results confirmed higher char yields, with the rLLDPE/rLDPE/MPP5/APP5 composition exhibiting the highest residue (3.00%), indicating a synergistic effect between APP and MPP. Rheological and mechanical analysis showed that APP had more impact on viscoelastic behavior, while the combination of IFRs provided balanced mechanical properties despite a slight reduction in tensile strength. This research highlights the potential of recycled polyethylene composites in promoting circular economy principles by developing sustainable, fire-resistant materials for the construction industry, reducing plastic waste, and enhancing the safety of recycled polymer-based applications.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Polímeros
- Vol. 35 (3)
Sustainable heterophasic ethylene-propylene copolymer composites with recycled aircraft graphite for antistatic packaging
Antistatic packaging prevents electrostatic discharge (ESD) damage, protecting electronic components during storage and transport, ensuring reliability in industries like electronics and aerospace. This study develops heterophasic ethylene-propylene copolymer (HEPC) composites reinforced with recycled aircraft graphite for antistatic applications. HEPC composites with 1, 5, and 10 wt% recycled graphite were prepared via twin-screw extrusion and injection molding. Morphological, thermal, rheological, mechanical, and electrical properties were analyzed. Adding 5 wt% graphite increased the elastic modulus by 21.3% and Shore D hardness by 6.1%. Electrical conductivity improved significantly, with a nine-order magnitude increase for 5 wt% graphite, enabling effective electrostatic dissipation. This sustainable approach enhances material performance while promoting circular economy practices by upcycling aerospace waste into high-value functional materials.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Polímeros
- Vol. 35 (3)
Open AccessSustainable heterophasic ethylene-propylene copolymer composites with recycled aircraft graphite for antistatic packaging
Antistatic packaging prevents electrostatic discharge (ESD) damage, protecting electronic components during storage and transport, ensuring reliability in industries like electronics and aerospace. This study develops heterophasic ethylene-propylene copolymer (HEPC) composites reinforced with recycled aircraft graphite for antistatic applications. HEPC composites with 1, 5, and 10 wt% recycled graphite were prepared via twin-screw extrusion and injection molding. Morphological, thermal, rheological, mechanical, and electrical properties were analyzed. Adding 5 wt% graphite increased the elastic modulus by 21.3% and Shore D hardness by 6.1%. Electrical conductivity improved significantly, with a nine-order magnitude increase for 5 wt% graphite, enabling effective electrostatic dissipation. This sustainable approach enhances material performance while promoting circular economy practices by upcycling aerospace waste into high-value functional materials.
- Open Access
- 28 November 2024
- Published by American Chemical Society (ACS) in ACS Polymers Au
- Vol. 5 (1) , 10-25
Tuning the Morphology of Immiscible Polymer Blend-Based Hybrid Nanocomposite for Improving Microwave Absorption Response
Polymer-blend-based nanocomposites incorporating carbon nanomaterials hold significant potential for microwave absorption materials (MAM) applications. This study investigates the microwave absorption response of hybrid nanocomposites composed of multiwalled carbon nanotubes (MWCNT) and nanographite, prepared using industrial-like melt-mixing masterbatch strategies in a polycarbonate/acrylonitrile-butadiene-styrene copolymer (PC/ABS) blend matrix with varying blend ratios (100/0, 80/20, 60/40, 50/50, 40/60, 20/80, and 0/100) and a constant filler content (2 wt % MWCNT and 2 wt % nanographite). Furthermore, the PC/ABS (40/60) blend-based nanocomposite was prepared with the addition of a compatibilizer, 5 wt % of maleic anhydride grafted ABS (ABS-g-MAH), to verify possible changes in morphology. Morphology, rheology, mechanical, electrical, and electromagnetic properties were correlated. From a morphological perspective, a preferential distribution of MWCNTs within the PC phase was observed, with the different blend ratios leading to a transition from a dispersed matrix morphology in 80/20 and 20/80 (PC/ABS) to cocontinuous morphologies in the intermediate blends (60/40, 50/50, and 40/60). The addition of ABS-g-MAH as a compatibilizer resulted in significant morphological refinement. Electromagnetic properties, evaluated using both X-band rectangular waveguide and broadband coaxial airline techniques, as well as electrical conductivity, were found to be strongly influenced by the varying morphologies. The nanocomposite PC/ABS/ABS-g-MAH with a thickness of 3.0 mm presented a Reflection Loss (RL) of -29.4 dB at 9.44 GHz, with a bandwidth of 3 GHz. Across the broadband spectrum, RL values below -10 dB were observed, including at lower frequencies around 3.70 GHz. These findings suggest that morphological tuning of the polymer matrix offers a promising pathway for optimizing microwave absorption in hybrid nanocomposites.
- 28 November 2024
- Published by American Chemical Society (ACS) in ACS Polymers Au
- Vol. 5 (1) , 10-25
Open AccessTuning the Morphology of Immiscible Polymer Blend-Based Hybrid Nanocomposite for Improving Microwave Absorption Response
Polymer-blend-based nanocomposites incorporating carbon nanomaterials hold significant potential for microwave absorption materials (MAM) applications. This study investigates the microwave absorption response of hybrid nanocomposites composed of multiwalled carbon nanotubes (MWCNT) and nanographite, prepared using industrial-like melt-mixing masterbatch strategies in a polycarbonate/acrylonitrile-butadiene-styrene copolymer (PC/ABS) blend matrix with varying blend ratios (100/0, 80/20, 60/40, 50/50, 40/60, 20/80, and 0/100) and a constant filler content (2 wt % MWCNT and 2 wt % nanographite). Furthermore, the PC/ABS (40/60) blend-based nanocomposite was prepared with the addition of a compatibilizer, 5 wt % of maleic anhydride grafted ABS (ABS-g-MAH), to verify possible changes in morphology. Morphology, rheology, mechanical, electrical, and electromagnetic properties were correlated. From a morphological perspective, a preferential distribution of MWCNTs within the PC phase was observed, with the different blend ratios leading to a transition from a dispersed matrix morphology in 80/20 and 20/80 (PC/ABS) to cocontinuous morphologies in the intermediate blends (60/40, 50/50, and 40/60). The addition of ABS-g-MAH as a compatibilizer resulted in significant morphological refinement. Electromagnetic properties, evaluated using both X-band rectangular waveguide and broadband coaxial airline techniques, as well as electrical conductivity, were found to be strongly influenced by the varying morphologies. The nanocomposite PC/ABS/ABS-g-MAH with a thickness of 3.0 mm presented a Reflection Loss (RL) of -29.4 dB at 9.44 GHz, with a bandwidth of 3 GHz. Across the broadband spectrum, RL values below -10 dB were observed, including at lower frequencies around 3.70 GHz. These findings suggest that morphological tuning of the polymer matrix offers a promising pathway for optimizing microwave absorption in hybrid nanocomposites.
- Open Access
Boosting Flame Retardancy of Polypropylene/Calcium Carbonate Composites with Inorganic Flame Retardants
This study investigates the effects of inorganic flame retardants, zinc borate, and magnesium hydroxide, on the thermal, morphological, flame retardancy, and mechanical properties of polypropylene (PP)/calcium carbonate composites for potential construction industry applications. Polypropylene/calcium carbonate (50 wt.%) composites containing 5 and 10 wt.% flame retardants were prepared using a batch mixer, followed by compression moulding. The results demonstrated enhanced thermal stability, with the highest char residue reaching 47.2% for polypropylene/calcium carbonate/zinc borate (10 wt.%)/magnesium hydroxide (10 wt.%) composite, a notably strong outcome. Additionally, the composite exhibited an elevated limited oxygen index (LOI) of 29.4%, indicating a synergistic effect between zinc borate and magnesium hydroxide. The proposed flame retardancy mechanism suggests that the flammability performance is driven by the interaction between the flame retardants within the polypropylene/calcium carbonate matrix. Magnesium hydroxide contributes to smoke suppression by releasing water, while zinc borate forms a protective glassy foam that covers the burning surface, promoting char formation and acting as a physical barrier to heat transmission and fire spread. Scanning electron microscopy confirmed good dispersion of the additives alongside calcium carbonate within the polymer matrix. Despite the addition of up to 10 wt.% flame retardants, the composites maintained high-notched impact strength.
Open AccessBoosting Flame Retardancy of Polypropylene/Calcium Carbonate Composites with Inorganic Flame Retardants
This study investigates the effects of inorganic flame retardants, zinc borate, and magnesium hydroxide, on the thermal, morphological, flame retardancy, and mechanical properties of polypropylene (PP)/calcium carbonate composites for potential construction industry applications. Polypropylene/calcium carbonate (50 wt.%) composites containing 5 and 10 wt.% flame retardants were prepared using a batch mixer, followed by compression moulding. The results demonstrated enhanced thermal stability, with the highest char residue reaching 47.2% for polypropylene/calcium carbonate/zinc borate (10 wt.%)/magnesium hydroxide (10 wt.%) composite, a notably strong outcome. Additionally, the composite exhibited an elevated limited oxygen index (LOI) of 29.4%, indicating a synergistic effect between zinc borate and magnesium hydroxide. The proposed flame retardancy mechanism suggests that the flammability performance is driven by the interaction between the flame retardants within the polypropylene/calcium carbonate matrix. Magnesium hydroxide contributes to smoke suppression by releasing water, while zinc borate forms a protective glassy foam that covers the burning surface, promoting char formation and acting as a physical barrier to heat transmission and fire spread. Scanning electron microscopy confirmed good dispersion of the additives alongside calcium carbonate within the polymer matrix. Despite the addition of up to 10 wt.% flame retardants, the composites maintained high-notched impact strength.
- 10 August 2024
- Published by Elsevier in Applied Materials Today
- Vol. 40
Advanced ternary carbon-based hybrid nanocomposites for electromagnetic functional behavior in additive manufacturing
- 10 August 2024
- Published by Elsevier in Applied Materials Today
- Vol. 40
Advanced ternary carbon-based hybrid nanocomposites for electromagnetic functional behavior in additive manufacturing