Zeyou Pan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zeyou Pan has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Patrick Hemberger
Laboratory for Synchrotron Radiation and Femtochemistry Paul Scherrer Institute Villigen Switzerland
19 shared publications - Jeroen Anton van Bokhoven
Paul Scherrer Institute
14 shared publications - Andras Bodi
Laboratory for Synchrotron Radiation and Femtochemistry, Paul Scherrer Institute, 5232 Villigen, Switzerland
13 shared publications - Xiangkun Wu
Shandong University
9 shared publications - Allen Puente-Urbina
Institute for Chemical and Bioengineering ETH Zürich Zurich Switzerland
8 shared publications - Zihao Zhang
Center for Renewable Carbon School of Natural Resources University of Tennessee Knoxville Tennessee USA
7 shared publications
Latest Publications
- Open Access
- 9 April 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (20) , e23882
Topology‐Dependent Coke Formation in the Catalytic Pyrolysis of Phenol Over HFAU and HZSM‐5 Zeolites
Catalytic pyrolysis of lignin, the most abundant natural aromatic polymer, offers a route to obtain value‐added products with a low carbon footprint. In such a process, the lignin structure undergoes decomposition through an intricate network of reaction routes. Despite the use of model compounds to gain insights into the decomposition pathways, the formation mechanism of coke and its role in critically affecting catalyst performance remain poorly understood. Herein, we use operando electron paramagnetic resonance (EPR) spectroscopy together with ex situ pulsed EPR experiments and density functional theory (DFT) calculations to understand coke formation in catalytic pyrolysis of phenol over HFAU and HZSM‐5 zeolites. Our results pinpoint that coke formation is heavily influenced by zeolite topology. The large cages in HFAU facilitate the initial formation of linear configurations that grow to extended structures, whereas the narrower channels in HZSM‐5 promote the formation of more linear structures. These results provide comprehensive mechanistic insights into coke formation and growth that are relevant for the development of lignin valorization strategies and for the general phenomenon of coke formation in zeolites and beyond.
- 9 April 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (20) , e23882
Open AccessTopology‐Dependent Coke Formation in the Catalytic Pyrolysis of Phenol Over HFAU and HZSM‐5 Zeolites
Catalytic pyrolysis of lignin, the most abundant natural aromatic polymer, offers a route to obtain value‐added products with a low carbon footprint. In such a process, the lignin structure undergoes decomposition through an intricate network of reaction routes. Despite the use of model compounds to gain insights into the decomposition pathways, the formation mechanism of coke and its role in critically affecting catalyst performance remain poorly understood. Herein, we use operando electron paramagnetic resonance (EPR) spectroscopy together with ex situ pulsed EPR experiments and density functional theory (DFT) calculations to understand coke formation in catalytic pyrolysis of phenol over HFAU and HZSM‐5 zeolites. Our results pinpoint that coke formation is heavily influenced by zeolite topology. The large cages in HFAU facilitate the initial formation of linear configurations that grow to extended structures, whereas the narrower channels in HZSM‐5 promote the formation of more linear structures. These results provide comprehensive mechanistic insights into coke formation and growth that are relevant for the development of lignin valorization strategies and for the general phenomenon of coke formation in zeolites and beyond.
- Open Access
- 9 April 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (20) , e23882
Topology‐Dependent Coke Formation in the Catalytic Pyrolysis of Phenol Over HFAU and HZSM‐5 Zeolites
Catalytic pyrolysis of lignin, the most abundant natural aromatic polymer, offers a route to obtain value‐added products with a low carbon footprint. In such a process, the lignin structure undergoes decomposition through an intricate network of reaction routes. Despite the use of model compounds to gain insights into the decomposition pathways, the formation mechanism of coke and its role in critically affecting catalyst performance remain poorly understood. Herein, we use operando electron paramagnetic resonance (EPR) spectroscopy together with ex situ pulsed EPR experiments and density functional theory (DFT) calculations to understand coke formation in catalytic pyrolysis of phenol over HFAU and HZSM‐5 zeolites. Our results pinpoint that coke formation is heavily influenced by zeolite topology. The large cages in HFAU facilitate the initial formation of linear configurations that grow to extended structures, whereas the narrower channels in HZSM‐5 promote the formation of more linear structures. These results provide comprehensive mechanistic insights into coke formation and growth that are relevant for the development of lignin valorization strategies and for the general phenomenon of coke formation in zeolites and beyond.
- 9 April 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (20) , e23882
Open AccessTopology‐Dependent Coke Formation in the Catalytic Pyrolysis of Phenol Over HFAU and HZSM‐5 Zeolites
Catalytic pyrolysis of lignin, the most abundant natural aromatic polymer, offers a route to obtain value‐added products with a low carbon footprint. In such a process, the lignin structure undergoes decomposition through an intricate network of reaction routes. Despite the use of model compounds to gain insights into the decomposition pathways, the formation mechanism of coke and its role in critically affecting catalyst performance remain poorly understood. Herein, we use operando electron paramagnetic resonance (EPR) spectroscopy together with ex situ pulsed EPR experiments and density functional theory (DFT) calculations to understand coke formation in catalytic pyrolysis of phenol over HFAU and HZSM‐5 zeolites. Our results pinpoint that coke formation is heavily influenced by zeolite topology. The large cages in HFAU facilitate the initial formation of linear configurations that grow to extended structures, whereas the narrower channels in HZSM‐5 promote the formation of more linear structures. These results provide comprehensive mechanistic insights into coke formation and growth that are relevant for the development of lignin valorization strategies and for the general phenomenon of coke formation in zeolites and beyond.
- Open Access
- 25 September 2025
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 90 (39) , 13802-13811
Facile Decarbonylation Suppresses the Ortho Effect and Ketene Formation in the Catalytic Pyrolysis of Substituted Benzaldehyde Lignin Model Compounds
Ketene intermediates lead to branching and lower phenol selectivities in the catalytic pyrolysis of lignin model compounds, which makes understanding their formation mechanism key to enable targeted process optimization. While gas-phase pyrolysis of methoxy- and hydroxy-substituted benzaldehydes favors fulvenone ketene formation, it is unclear if the same reaction pathways dominate in the presence of Brønsted acid sites. Thus, we tested if HZSM-5 produces fulvenone utilizing operando photoelectron photoion coincidence spectroscopy. Hydroxybenzaldehydes undergo acid-catalyzed decarbonylation, via oxonium mediated hydrogen transfer reactions, to phenol instead of dehydrogenation to fulvenone. The catalytic pyrolysis of anisaldehydes is initiated by demethylation and decarbonylation to yield anisole or hydroxybenzaldehydes and does not produce ketene either. Subsequently, decarbonylation and demethylation, respectively, lead to phenol and methylated derivatives due to abundant surface methyl groups over HZSM-5. Comparative analysis of the catalytic pyrolysis pathways of methoxyphenols and anisaldehydes, reveals that the chemistry of individual functional groups outcompetes the interactions of the vicinal substituents (ortho effect) in anis- and salicylaldehydes, resulting in the suppression of fulvenone ketene. We discuss how the high reactivity of aldehyde functionalities by decarbonylation may be leveraged to increase selectivities to value-added products.
- 25 September 2025
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 90 (39) , 13802-13811
Open AccessFacile Decarbonylation Suppresses the Ortho Effect and Ketene Formation in the Catalytic Pyrolysis of Substituted Benzaldehyde Lignin Model Compounds
Ketene intermediates lead to branching and lower phenol selectivities in the catalytic pyrolysis of lignin model compounds, which makes understanding their formation mechanism key to enable targeted process optimization. While gas-phase pyrolysis of methoxy- and hydroxy-substituted benzaldehydes favors fulvenone ketene formation, it is unclear if the same reaction pathways dominate in the presence of Brønsted acid sites. Thus, we tested if HZSM-5 produces fulvenone utilizing operando photoelectron photoion coincidence spectroscopy. Hydroxybenzaldehydes undergo acid-catalyzed decarbonylation, via oxonium mediated hydrogen transfer reactions, to phenol instead of dehydrogenation to fulvenone. The catalytic pyrolysis of anisaldehydes is initiated by demethylation and decarbonylation to yield anisole or hydroxybenzaldehydes and does not produce ketene either. Subsequently, decarbonylation and demethylation, respectively, lead to phenol and methylated derivatives due to abundant surface methyl groups over HZSM-5. Comparative analysis of the catalytic pyrolysis pathways of methoxyphenols and anisaldehydes, reveals that the chemistry of individual functional groups outcompetes the interactions of the vicinal substituents (ortho effect) in anis- and salicylaldehydes, resulting in the suppression of fulvenone ketene. We discuss how the high reactivity of aldehyde functionalities by decarbonylation may be leveraged to increase selectivities to value-added products.
- Open Access
- 2 September 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (18) , 15963-15971
The Impact of Binder Activity on Methanol-to-Hydrocarbons Conversion
- 2 September 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (18) , 15963-15971
Open AccessThe Impact of Binder Activity on Methanol-to-Hydrocarbons Conversion
- Open Access
- 12 August 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (35) , 18302-18308
Tunable synthesis of carbon nanotubes via methane catalytic pyrolysis by adjusting Mo incorporation in Fe/MgO
Catalytic pyrolysis of methane for the synthesis of carbon nanotubes (CNTs) was explored using an Fe–Mo/MgO catalyst. The impact of molybdenum (Mo) addition on carbon productivity and product characteristics was investigated by (S)TEM, XRD, TGA, nitrogen adsorption, and Raman spectroscopy. The Fe/MgO catalyst exhibited a carbon productivity of 0.16 g gCat.−1 with 15% graphitic carbon selectivity. TEM revealed that carbon nanotubes (CNTs) including single-walled (SWCNTs) and double-walled nanotubes (DWCNTs) were produced. Mo incorporation synergistically enhanced both carbon productivity and graphitic carbon selectivity. For Fe-0.1Mo, productivity improved to 0.40 g gCat.−1 with 60% graphitic carbon selectivity, while preferentially yielding SWCNTs. Further increasing Mo loading maximized productivity at 1.03 g gCat.−1 for Fe–1Mo, coupled with 96% graphitic carbon selectivity. At higher Mo concentrations (Fe–0.5Mo and Fe–1Mo), Fe–Mo nanoparticle coarsening occurred, shifting CNT morphology toward multi-walled structures (MWCNTs). Lifetime studies confirmed enhanced catalyst stability under Mo promotion, with Fe–1Mo remaining active beyond 1 hour. Conversely, Mo/MgO showed negligible activity (0.08 g gCat.−1) and produced only graphite flakes, underscoring iron's essential role in CNT growth. This work demonstrates Mo's dual function in enabling selective CNT production while providing mechanistic insights into its promotion of methane pyrolysis and nanotube formation.
- 12 August 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (35) , 18302-18308
Open AccessTunable synthesis of carbon nanotubes via methane catalytic pyrolysis by adjusting Mo incorporation in Fe/MgO
Catalytic pyrolysis of methane for the synthesis of carbon nanotubes (CNTs) was explored using an Fe–Mo/MgO catalyst. The impact of molybdenum (Mo) addition on carbon productivity and product characteristics was investigated by (S)TEM, XRD, TGA, nitrogen adsorption, and Raman spectroscopy. The Fe/MgO catalyst exhibited a carbon productivity of 0.16 g gCat.−1 with 15% graphitic carbon selectivity. TEM revealed that carbon nanotubes (CNTs) including single-walled (SWCNTs) and double-walled nanotubes (DWCNTs) were produced. Mo incorporation synergistically enhanced both carbon productivity and graphitic carbon selectivity. For Fe-0.1Mo, productivity improved to 0.40 g gCat.−1 with 60% graphitic carbon selectivity, while preferentially yielding SWCNTs. Further increasing Mo loading maximized productivity at 1.03 g gCat.−1 for Fe–1Mo, coupled with 96% graphitic carbon selectivity. At higher Mo concentrations (Fe–0.5Mo and Fe–1Mo), Fe–Mo nanoparticle coarsening occurred, shifting CNT morphology toward multi-walled structures (MWCNTs). Lifetime studies confirmed enhanced catalyst stability under Mo promotion, with Fe–1Mo remaining active beyond 1 hour. Conversely, Mo/MgO showed negligible activity (0.08 g gCat.−1) and produced only graphite flakes, underscoring iron's essential role in CNT growth. This work demonstrates Mo's dual function in enabling selective CNT production while providing mechanistic insights into its promotion of methane pyrolysis and nanotube formation.
- Open Access
- 26 May 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (14) , e202500516
Pathways to Aromatics in the Catalytic Pyrolysis of a Polyvinylchloride Model Compound Revealed by Operando Photoelectron Photoion Coincidence Spectroscopy
Dechlorination channels and pathways to olefins and aromatics in the catalytic pyrolysis of the polyvinylchloride (PVC) model compound 1,3‐dichlorobutane are revealed using operando photoelectron photoion coincidence (PEPICO) spectroscopy. Experimental and computational results agree that the primary pathway involves double dehydrochlorination producing 1,3‐butadiene and HCl. Minor radical channels are evidenced by the detection of chloromethyl, methyl, and propargyl radicals in thermal decomposition, while chlorine radicals are absent. HZSM‐5 zeolites lower the reaction temperature and facilitate 1,3‐butadiene association reactions producing C5–C12 olefins. Further reaction steps, detected experimentally and in part isomer‐selectively, mimic previously postulated cross‐linking pathways to aromatics in PVC catalytic pyrolysis. This study identifies CC coupling as well as Diels–Alder dimerization of butadiene to yield polymethylated cyclopentadienes. These are central precursors to aromatics, for example, benzene, toluene, and xylenes (BTX). Ring expansion and contraction as well as transmethylation reactions are found to be dominant routes to aromatic products. The mechanisms during thermocatalytic conversion of PVC are applicable to other plastics and resemble the chemistry upon methanol‐ and methylchloride‐to‐hydrocarbon and aromatics conversion, which will inspire new strategies to enhance selectivity towards aromatics and mitigate coke formation.
- 26 May 2025
- Published by Wiley in ChemSusChem
- Vol. 18 (14) , e202500516
Open AccessPathways to Aromatics in the Catalytic Pyrolysis of a Polyvinylchloride Model Compound Revealed by Operando Photoelectron Photoion Coincidence Spectroscopy
Dechlorination channels and pathways to olefins and aromatics in the catalytic pyrolysis of the polyvinylchloride (PVC) model compound 1,3‐dichlorobutane are revealed using operando photoelectron photoion coincidence (PEPICO) spectroscopy. Experimental and computational results agree that the primary pathway involves double dehydrochlorination producing 1,3‐butadiene and HCl. Minor radical channels are evidenced by the detection of chloromethyl, methyl, and propargyl radicals in thermal decomposition, while chlorine radicals are absent. HZSM‐5 zeolites lower the reaction temperature and facilitate 1,3‐butadiene association reactions producing C5–C12 olefins. Further reaction steps, detected experimentally and in part isomer‐selectively, mimic previously postulated cross‐linking pathways to aromatics in PVC catalytic pyrolysis. This study identifies CC coupling as well as Diels–Alder dimerization of butadiene to yield polymethylated cyclopentadienes. These are central precursors to aromatics, for example, benzene, toluene, and xylenes (BTX). Ring expansion and contraction as well as transmethylation reactions are found to be dominant routes to aromatic products. The mechanisms during thermocatalytic conversion of PVC are applicable to other plastics and resemble the chemistry upon methanol‐ and methylchloride‐to‐hydrocarbon and aromatics conversion, which will inspire new strategies to enhance selectivity towards aromatics and mitigate coke formation.
- Open Access
- 30 August 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 26 (18) , 9899-9910
Catalytic pyrolysis mechanism of lignin moieties driven by aldehyde, hydroxyl, methoxy, and allyl functionalization: the role of reactive quinone methide and ketene intermediates
The catalytic pyrolysis of guaiacol-based lignin monomers, vanillin, syringol, and eugenol over commercial HZSM-5 has been investigated using operando Photoelectron Photoion Coincidence (PEPICO) spectroscopy to unveil the reaction mechanism by detecting reactive intermediates, such as quinone methides and ketenes, and products. Vanillin shares the decomposition mechanism with guaiacol due to prompt and efficient decarbonylation, which allows us to control this reaction leading to a phenol selectivity increase by switching to a faujasite catalyst and decreasing the Si/Al ratio. Syringol first demethylates to 3-methoxycatechol, which mainly dehydroxylates to o- and m-guaiacol. Ketene formation channels over HZSM-5 are less important here than for guaiacol or vanillin, but product distribution remains similar. C3 addition to guaiacol yields eugenol, which shows a more complex product distribution upon catalytic pyrolysis. By analogies to monomers with simplified functionalization, namely allylbenzene, 4-allylcatechol, and 4-methylcatechol, the eugenol chemistry could be fully resolved. Previously postulated reactive semi-quinone intermediates are detected spectroscopically, and their involvement opens alternative pathways to condensation and phenol formation. Allyl groups, produced by dehydroxylation of the β-O-4 bond, may not only decompose via C1/C2/C3 loss, but also cyclize to indene and its derivatives over HZSM-5. This comparably high reactivity leads to an unselective branching of the chemistry and to a complex product distribution, which is difficult to control. Indenes and naphthalenes are also prototypical coke precursors efficiently deactivating the catalyst. We rely on these mechanistic insights to discuss strategies to fine-tune process conditions to increase the selectivities of desired products by enhancing either vanillin and guaiacol or supressing eugenol yields from native lignin.
- 30 August 2024
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 26 (18) , 9899-9910
Open AccessCatalytic pyrolysis mechanism of lignin moieties driven by aldehyde, hydroxyl, methoxy, and allyl functionalization: the role of reactive quinone methide and ketene intermediates
The catalytic pyrolysis of guaiacol-based lignin monomers, vanillin, syringol, and eugenol over commercial HZSM-5 has been investigated using operando Photoelectron Photoion Coincidence (PEPICO) spectroscopy to unveil the reaction mechanism by detecting reactive intermediates, such as quinone methides and ketenes, and products. Vanillin shares the decomposition mechanism with guaiacol due to prompt and efficient decarbonylation, which allows us to control this reaction leading to a phenol selectivity increase by switching to a faujasite catalyst and decreasing the Si/Al ratio. Syringol first demethylates to 3-methoxycatechol, which mainly dehydroxylates to o- and m-guaiacol. Ketene formation channels over HZSM-5 are less important here than for guaiacol or vanillin, but product distribution remains similar. C3 addition to guaiacol yields eugenol, which shows a more complex product distribution upon catalytic pyrolysis. By analogies to monomers with simplified functionalization, namely allylbenzene, 4-allylcatechol, and 4-methylcatechol, the eugenol chemistry could be fully resolved. Previously postulated reactive semi-quinone intermediates are detected spectroscopically, and their involvement opens alternative pathways to condensation and phenol formation. Allyl groups, produced by dehydroxylation of the β-O-4 bond, may not only decompose via C1/C2/C3 loss, but also cyclize to indene and its derivatives over HZSM-5. This comparably high reactivity leads to an unselective branching of the chemistry and to a complex product distribution, which is difficult to control. Indenes and naphthalenes are also prototypical coke precursors efficiently deactivating the catalyst. We rely on these mechanistic insights to discuss strategies to fine-tune process conditions to increase the selectivities of desired products by enhancing either vanillin and guaiacol or supressing eugenol yields from native lignin.
- Open Access
- 27 July 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-9
Tuning the zeolite acidity enables selectivity control by suppressing ketene formation in lignin catalytic pyrolysis
Unveiling catalytic mechanisms at a molecular level aids rational catalyst design and selectivity control for process optimization. In this study, we find that the Brønsted acid site density of the zeolite catalyst efficiently controls the guaiacol catalytic pyrolysis mechanism. Guaiacol demethylation to catechol initiates the reaction, as evidenced by the detected methyl radicals. The mechanism branches to form either fulvenone (c-C5H4 = C = O), a reactive ketene intermediate, by catechol dehydration, or phenol by acid-catalyzed dehydroxylation. At high Brønsted acid site density, fulvenone formation is inhibited due to surface coordination configuration of its precursor, catechol. By quantifying reactive intermediates and products utilizing operando photoelectron photoion coincidence spectroscopy, we find evidence that ketene suppression is responsible for the fivefold phenol selectivity increase. Complementary fulvenone reaction pathway calculations, along with 29Si NMR-MAS spectroscopy results corroborate the mechanism. The proposed, flexible operando approach is applicable to a broad variety of heterogeneous catalytic reactions.
- 27 July 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-9
Open AccessTuning the zeolite acidity enables selectivity control by suppressing ketene formation in lignin catalytic pyrolysis
Unveiling catalytic mechanisms at a molecular level aids rational catalyst design and selectivity control for process optimization. In this study, we find that the Brønsted acid site density of the zeolite catalyst efficiently controls the guaiacol catalytic pyrolysis mechanism. Guaiacol demethylation to catechol initiates the reaction, as evidenced by the detected methyl radicals. The mechanism branches to form either fulvenone (c-C5H4 = C = O), a reactive ketene intermediate, by catechol dehydration, or phenol by acid-catalyzed dehydroxylation. At high Brønsted acid site density, fulvenone formation is inhibited due to surface coordination configuration of its precursor, catechol. By quantifying reactive intermediates and products utilizing operando photoelectron photoion coincidence spectroscopy, we find evidence that ketene suppression is responsible for the fivefold phenol selectivity increase. Complementary fulvenone reaction pathway calculations, along with 29Si NMR-MAS spectroscopy results corroborate the mechanism. The proposed, flexible operando approach is applicable to a broad variety of heterogeneous catalytic reactions.
- Open Access
- 1 March 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (3) , 034103
A direct liquid sampling interface for photoelectron photoion coincidence spectroscopy
We introduce an effective and flexible high vacuum interface to probe the liquid phase with photoelectron photoion coincidence (liq-PEPICO) spectroscopy at the vacuum ultraviolet (VUV) beamline of the Swiss Light Source. The interface comprises a high-temperature sheath gas-driven vaporizer, which initially produces aerosols. The particles evaporate and form a molecular beam, which is skimmed and ionized by VUV radiation. The molecular beam is characterized using ion velocity map imaging, and the vaporization parameters of the liq-PEPICO source have been optimized to improve the detection sensitivity. Time-of-flight mass spectra and photoion mass-selected threshold photoelectron spectra (ms-TPES) were recorded for an ethanolic solution of 4-propylguaiacol, vanillin, and 4-hydroxybenzaldehyde (1 g/l of each). The ground state ms-TPES band of vanillin reproduces the reference, room-temperature spectrum well. The ms-TPES for 4-propylguaiacol and 4-hydroxybenzaldehyde are reported for the first time. Vertical ionization energies obtained by equation-of-motion calculations reproduce the photoelectron spectral features. We also investigated the aldol condensation dynamics of benzaldehyde with acetone using liq-PEPICO. Our direct sampling approach, thus, enables probing reactions at ambient pressure during classical synthesis procedures and microfluidic chip devices.
- 1 March 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (3) , 034103
Open AccessA direct liquid sampling interface for photoelectron photoion coincidence spectroscopy
We introduce an effective and flexible high vacuum interface to probe the liquid phase with photoelectron photoion coincidence (liq-PEPICO) spectroscopy at the vacuum ultraviolet (VUV) beamline of the Swiss Light Source. The interface comprises a high-temperature sheath gas-driven vaporizer, which initially produces aerosols. The particles evaporate and form a molecular beam, which is skimmed and ionized by VUV radiation. The molecular beam is characterized using ion velocity map imaging, and the vaporization parameters of the liq-PEPICO source have been optimized to improve the detection sensitivity. Time-of-flight mass spectra and photoion mass-selected threshold photoelectron spectra (ms-TPES) were recorded for an ethanolic solution of 4-propylguaiacol, vanillin, and 4-hydroxybenzaldehyde (1 g/l of each). The ground state ms-TPES band of vanillin reproduces the reference, room-temperature spectrum well. The ms-TPES for 4-propylguaiacol and 4-hydroxybenzaldehyde are reported for the first time. Vertical ionization energies obtained by equation-of-motion calculations reproduce the photoelectron spectral features. We also investigated the aldol condensation dynamics of benzaldehyde with acetone using liq-PEPICO. Our direct sampling approach, thus, enables probing reactions at ambient pressure during classical synthesis procedures and microfluidic chip devices.
- Open Access
- 30 September 2022
- Published by Wiley in Angewandte Chemie
- Vol. 134 (41)
Frontispiz: Ketenes in the Induction of the Methanol‐to‐Olefins Process
- 30 September 2022
- Published by Wiley in Angewandte Chemie
- Vol. 134 (41)
Open AccessFrontispiz: Ketenes in the Induction of the Methanol‐to‐Olefins Process