Kuntum Khoiro Ummatin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Kuntum Khoiro Ummatin has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Eva Nur Fauziah
Universitas Pertamina
3 shared publications - I. Wayan Koko Suryawan
Universitas Pertamina, Indonesia
3 shared publications - Iva Yenis Septiariva
Universitas Sebelas Maret
3 shared publications - Jun Wei Lim
HICoE-Centre for Biofuel and Biochemical Research, Institute of Self-Sustainable Building, Department of Fundamental and Applied Sciences, Universiti Teknologi PETRONAS, Seri Iskandar, Malaysia
3 shared publications - Mega Mutiara Sari
Universitas Pertamina, Indonesia
3 shared publications - Qurrotin Ayunina Maulida Okta Arifianti
Engineering Management, Industrial and Agroindusty Technology Faculty, Universitas Internasional Semen Indonesia, Kompleks PT. Semen Indonesia (Persero) Tbk, Jl. Veteran, Kb. Dalem, Sidomoro, Kebomas, Gresik 61122, East Java, Indonesia
2 shared publications
Latest Publications
- Open Access
- 1 February 2023
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 13 (1) , 1-8
Prediction of recovery energy from ultimate analysis of waste generation in Depok City, Indonesia
Refuse derived fuel (RDF) is an environmentally friendly renewable fuel developed to reduce waste generation. RDF can consist of various kinds of waste such as paper and gardens. One of the critical parameters is the chemical element and calorific value. The purpose of this study was to determine the potential for waste reduction and the relationship of ultimate longevity in RDF to the calorific value. This study's paper and garden waste mixture were P0 (100% paper), P25 (75% paper and 25% garden), P50 (50% paper and 50% garden), P75 (25% paper and 75% garden), and P100 (100% garden). The calorific value of the mixture can reach 3.6-5.2 kWh/kg. Simultaneously the relationship of ultimate elements nitrogen (N), hydrogen (H), oxygen (O), and ash affects the heating value of RDF. Sampling the application in Depok City can reduce waste by 6.67%, with the potential for electrical energy from paper and garden wastes of 358,903.8 kWh and 48,681 kWh, respectively. This shows that this energy waste can supply 0.1% of the total daily electricity demand in Depok City.
- 1 February 2023
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 13 (1) , 1-8
Open AccessPrediction of recovery energy from ultimate analysis of waste generation in Depok City, Indonesia
Refuse derived fuel (RDF) is an environmentally friendly renewable fuel developed to reduce waste generation. RDF can consist of various kinds of waste such as paper and gardens. One of the critical parameters is the chemical element and calorific value. The purpose of this study was to determine the potential for waste reduction and the relationship of ultimate longevity in RDF to the calorific value. This study's paper and garden waste mixture were P0 (100% paper), P25 (75% paper and 25% garden), P50 (50% paper and 50% garden), P75 (25% paper and 75% garden), and P100 (100% garden). The calorific value of the mixture can reach 3.6-5.2 kWh/kg. Simultaneously the relationship of ultimate elements nitrogen (N), hydrogen (H), oxygen (O), and ash affects the heating value of RDF. Sampling the application in Depok City can reduce waste by 6.67%, with the potential for electrical energy from paper and garden wastes of 358,903.8 kWh and 48,681 kWh, respectively. This shows that this energy waste can supply 0.1% of the total daily electricity demand in Depok City.
- Open Access
- 1 March 2022
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 23 (2) , 122-128
Pelletizing of Various Municipal Solid Waste: Effect of Hardness and Density into Caloric Value
Density and hardness are physical parameters in the manufacture of refuse derived fuel (RDF) pellets. In making pellets, we also want to achieve a high heating value for the combustion system. This research aims to analyze the mixture of municipal solid waste to its density and hardness and study...
- 1 March 2022
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 23 (2) , 122-128
Open AccessPelletizing of Various Municipal Solid Waste: Effect of Hardness and Density into Caloric Value
Density and hardness are physical parameters in the manufacture of refuse derived fuel (RDF) pellets. In making pellets, we also want to achieve a high heating value for the combustion system. This research aims to analyze the mixture of municipal solid waste to its density and hardness and study...
- Open Access
- 11 October 2021
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 88 (1) , 12-23
Refuse Derived Fuel for Energy Recovery by Thermal Processes. A Case Study in Depok City, Indonesia
The number of words should not exceed 350. Depok City is one of Indonesia's big cities, which is currently focused on processing waste-to-energy. This research was conducted to study and describe waste management in Depok City to become renewable energy. Secondary data from the Depok City local government's inventory was used to determine the generation and composition of municipal solid waste (MSW). The waste's characterization was taken from the material recovery facility of Depok City, located at Jalan Merdeka. The amount of waste generated in Depok City is predicted to reach 681.612 tons/year by 2025. The significant waste composition items were food waste, garden waste, textiles, paper, and plastics. The result shows that the potential heating value for the waste was 35.04 MJ/kg Thermal gravimetric analysis (TGA) at a temperature range of 30-800 ° C showed only 1.39% leftover food, but mass decline at 30-110 ° C occurred quite slowly due to high air content. The optimum combustion temperature for paper, plastic, and garden waste are 317-430°C, 404.5-447.15°C, and 251.78-479.9°C, respectively. The total heating value obtained was equivalent to the electrical energy of 6635.2 GWh/year in 2025. A 1-tailed ANOVA analysis with a significance of 90% parameters of water content, carbon (C) composition, hydrogen composition (H), and oxygen composition (O) presented significances of 0.090; 0.005; 0.003; and 0.037, respectively.
- 11 October 2021
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 88 (1) , 12-23
Open AccessRefuse Derived Fuel for Energy Recovery by Thermal Processes. A Case Study in Depok City, Indonesia
The number of words should not exceed 350. Depok City is one of Indonesia's big cities, which is currently focused on processing waste-to-energy. This research was conducted to study and describe waste management in Depok City to become renewable energy. Secondary data from the Depok City local government's inventory was used to determine the generation and composition of municipal solid waste (MSW). The waste's characterization was taken from the material recovery facility of Depok City, located at Jalan Merdeka. The amount of waste generated in Depok City is predicted to reach 681.612 tons/year by 2025. The significant waste composition items were food waste, garden waste, textiles, paper, and plastics. The result shows that the potential heating value for the waste was 35.04 MJ/kg Thermal gravimetric analysis (TGA) at a temperature range of 30-800 ° C showed only 1.39% leftover food, but mass decline at 30-110 ° C occurred quite slowly due to high air content. The optimum combustion temperature for paper, plastic, and garden waste are 317-430°C, 404.5-447.15°C, and 251.78-479.9°C, respectively. The total heating value obtained was equivalent to the electrical energy of 6635.2 GWh/year in 2025. A 1-tailed ANOVA analysis with a significance of 90% parameters of water content, carbon (C) composition, hydrogen composition (H), and oxygen composition (O) presented significances of 0.090; 0.005; 0.003; and 0.037, respectively.
- Open Access
- 1 February 2021
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1803 (1) , 012012
Production of Briquettes to Utilize Woody Cutting Waste at Universitas Internasional Semen Indonesia (UISI)
Universitas Internasional Semen Indonesia (UISI) disposes abundant amount of woody waste, such as leaves, twigs, and brunches from the pruning of woody plants. The aim of this research is to convert of this waste into combustible biomass briquettes by varying the particle size and binder ratio. A hydraulic press with 2 tons power and a cylindrical iron mold with diameter of 3.5 cm and height of 3 cm were used for the briquetting process. The physical characteristics of woody waste briquette, such as moisture content, ash content, volatile matter and carbon fix were evaluated using proximate analysis. The caloric value of briquetted fuel was measured by bomb calorimeter. The combustion test was conducted to determine the combustion characteristic of briquettes. The general result shows that the caloric value of developed briquettes was between 3402 and 3630 kcal/kg. The moisture content of briquette ranged from 1.080-1.16 %. Volatile matter was found in the range of 22.2 to 39.4 %. Ash content was 31.2-35.9 %, and carbon fix was 23.54-45.52%. The shortest ignition time was 229 s. The longest burning time was 78 minutes. Based on TG/DTA results, woody waste briquette decomposition occurred from 49°C to 801°C.
- 1 February 2021
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1803 (1) , 012012
Open AccessProduction of Briquettes to Utilize Woody Cutting Waste at Universitas Internasional Semen Indonesia (UISI)
Universitas Internasional Semen Indonesia (UISI) disposes abundant amount of woody waste, such as leaves, twigs, and brunches from the pruning of woody plants. The aim of this research is to convert of this waste into combustible biomass briquettes by varying the particle size and binder ratio. A hydraulic press with 2 tons power and a cylindrical iron mold with diameter of 3.5 cm and height of 3 cm were used for the briquetting process. The physical characteristics of woody waste briquette, such as moisture content, ash content, volatile matter and carbon fix were evaluated using proximate analysis. The caloric value of briquetted fuel was measured by bomb calorimeter. The combustion test was conducted to determine the combustion characteristic of briquettes. The general result shows that the caloric value of developed briquettes was between 3402 and 3630 kcal/kg. The moisture content of briquette ranged from 1.080-1.16 %. Volatile matter was found in the range of 22.2 to 39.4 %. Ash content was 31.2-35.9 %, and carbon fix was 23.54-45.52%. The shortest ignition time was 229 s. The longest burning time was 78 minutes. Based on TG/DTA results, woody waste briquette decomposition occurred from 49°C to 801°C.