AMAlejandra Gijón Mancheño

Alejandra Gijón Mancheño

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alejandra Gijón Mancheño has a total of 47 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Quantifying Mangrove Forest Attributes Using Terrestrial Laser Scanning

    by Thomas Dunlop, Alejandra Gijón Mancheño, William Glamore, Stefan Felder, Bregje K. van Wesenbeeck

    Mangroves are increasingly recognised for their ecosystem services, including their capacity to store carbon and adapt to climate pressures by stabilising shorelines and acting as storm barriers. To quantify these services, relevant parameters such as mangrove biomass and drag coefficients have been calculated using allometric equations fitted to field measurements of physical mangrove attributes. However, previous research to quantify mangrove attributes has involved time-consuming hand measurements and long processing times associated with terrestrial laser scanning (TLS). To more efficiently capture and process mangrove attributes, such as the density, diameter, height, and projected area of stems and roots, a novel method for collecting mangrove field data using TLS was developed. Recorded TLS data were compared to field measurements conducted in 12 Avicennia marina forests across 10 estuaries and 4 unique estuary typologies. The results demonstrated the reliable estimation of mangrove attributes using TLS and revealed a link between these attributes and estuarine geomorphology. Mangrove stems were accurately identified in all estuary typologies, with attribute estimations more accurate for forests in Drowned River Valleys (DRVs). A sensitivity analysis revealed that 10–20 trees for DRVs and 35–45 trees for barrier estuaries require point cloud processing to characterise a forest area of 400–1300 m2 and to achieve convergent stem diameter and tree height results. The method presented herein offers an efficient way to quantify aboveground stem and root attributes and the surface area of mangrove trees. This data can be used to characterise mangrove forests worldwide and provide fundamental attributes for quantifying ecosystem services.


  • Open Access

    Unravelling Mangrove Storm Damage Resistance for Sustainable Flood Defense Safety Using 3D-Printed Mimics

    by Rosanna van Hespen, Alejandra Gijón Mancheño, Maarten Kleinhans, Jim van Belzen, Celine E. J. van Bijsterveldt, Jaco de Smit, Zhan Hu, Bas W. Borsje, Bas Hofland, Tjeerd J. Bouma

    Mangrove forests are vital for flood reduction, yet their failure mechanisms during storms are poorly known, hampering their integration into engineered coastal protection. In this paper, we aimed to unravel the relationship between the resistance of mangrove trees to overturning and root distribution and the properties of the soil, while avoiding damage to natural mangrove forests. We therefore (i) tested the stability of 3D-printed tree mimics that imitate typical shallow mangrove root systems, mimicking both damaged and intact root systems, in sediments representing the soil properties of contrasting mangrove sites, and subsequently (ii) tested if the existing stability models for terrestrial trees are applicable for mangrove tree species, which have unique shallow root systems to survive waterlogged soils. Root systems of different complexities were modeled after Avicennia alba, Avicennia germinans, and Rhizophora stylosa, and printed at a 1:100 scale using material densities matching those of natural tree roots, to ensure the geometric scaling of overturning moments. The mimic stability increased with the soil shear strength and root plate surface area. The optimal root configuration for mimic stability depended on the sediment properties: spreading root systems performed better in softer sediments, while concentrating root biomass near the trunk improved stability in stronger sediments. An adapted terrestrial tree resistance model reproduced our measurements well, suggesting that such models could be adapted to predict the stability of shallow-rooted mangroves living in waterlogged soils. Field tree-pulling experiments are needed to further confirm our conclusions with real-world data, examine complicating factors like root intertwining, and consider mangrove tree properties like aerial roots. Overall, this work establishes a foundation for incorporating mangrove storm damage into hybrid coastal protection systems.

  • Open Access

    Monitoring Pilot Study of Temporary Permeable Structures for Mangrove Restoration

    by Alejandra Gijón Mancheño, Bagus Maulana, Ad J. H. M. Reniers, Silke A. J. Tas, Tom Wilms, Sri Rejeki, Restiana W. Ariyati, Lestari L. Widowati

    Temporary permeable structures of bamboo and brushwood have been implemented for mangrove restoration along retreating coastlines worldwide. However, deriving lessons from previous studies is inhibited by their lack of morphodynamic context, with missing bathymetric data or control comparisons. In this paper, we present a low-tech, low-cost, data collection methodology to support morphodynamic system understanding and modeling of mangrove coastlines. This method was applied to monitor a mangrove restoration project featuring temporary permeable structures of bamboo and PVC, installed in late 2021 on the subsiding muddy coast of Demak, Indonesia. Seabed level changes were regularly tracked with bathymetric surveys and monitoring poles across structures and at a nearby control site. Structures were positioned landward of a chenier, at −0.7 m to −0.9 m relative to mean sea level (MSL), and 30–70 m seaward of the mangrove fringe. Measurements from August 2021 to December 2022 revealed seabed erosion (−0.33 m to −0.4 m) seaward of the structures, with mixed responses landward: two sections eroded (−0.04 m to −0.05 m), one remained stable, and a creek-adjacent section eroded by −0.43 m. At the nearby control site, chenier migration and vertical growth promoted landward accretion, though elevations remained below MSL and thus unsuitable for mangrove colonization. The bathymetric and monitoring pole measurements presented in this study constitute valuable datasets for modeling studies aiming to unravel the dominant processes driving morphodynamic changes. Such models could also inform integrated approaches to mangrove restoration in subsiding coastlines, considering sediment supply, subsidence management, and structure integrity.


  • Open Access

    Nature Meets Infrastructure: The Role of Mangroves in Strengthening Bangladesh’s Coastal Flood Defenses

    by Alejandra Gijón Mancheño, Bramka A. Jafino, Bas Hofland, Bregje K. van Wesenbeeck, Swarna Kazi, Ignacio Urrutia

    Mangroves have been used for coastal protection in Bangladesh since the 1960s, but their integration with embankment designs has not been fully explored. This paper investigates the effect of existing mangroves on required embankment performance, with a focus on the wave-damping effect of mangroves. Existing mangroves reduce the required thickness of embankment revetment by up to 16–30% in the west, 47–82% in the central region, and 53–77% in the east. Notable mangrove sites include the belt south of polder 45 (Amtali), with an average width of 1.77 km, and the Kukri-Mukri polder, with an average width of 1.82 km. These mangroves reduce the need for thick slope protection, allowing the replacement of concrete revetments with softer materials, such as clay or grass, combined with mangrove foreshore. Additional large mangrove belts are found in Sandwip and Mirersarai. By replacing or reducing revetment requirements, mangrove forests can minimize carbon emissions from construction while providing carbon sequestration and other ecosystem services. This study can inform future sustainable investments in coastal protection systems by identifying areas where mangroves offer the greatest wave-damping benefits, which could be focus of follow-up feasibility studies.


  • Open Access

    Integrating mangrove growth and failure in coastal flood protection designs

    by A. Gijón Mancheño, V. Vuik, B. K. van Wesenbeeck, S. N. Jonkman, R. van Hespen, J. R. Moll, S. Kazi, I. Urrutia, M. van Ledden

    Mangrove forests reduce wave attack along tropical and sub-tropical coastlines, decreasing the wave loads acting on coastal protection structures. Mangrove belts seaward of embankments can therefore lower their required height and decrease their slope protection thickness. Wave reduction by mangroves depends on tree frontal surface area and stability against storms, but both aspects are often oversimplified or neglected in coastal protection designs. Here we present a framework to evaluate how mangrove belts influence embankment designs, including mangrove growth over time and failure by overturning and trunk breakage. This methodology is applied to Sonneratia apetala mangroves seaward of embankments in Bangladesh, considering forest widths between 10 and 1000 m (cross-shore). For water depths of 5 m, wave reduction by mangrove forests narrower than 1 km mostly affects the slope protection and the bank erodibility, whereas the required embankment height is less influenced by mangroves. Sonneratia apetala trees experience a relative maximum in wave attenuation capacity at 10 years age, due to their large submerged canopy area. Once trees are more than 20 years old, their canopy is emergent, and most wave attenuation is caused by trunk and roots. Canopy emergence exposes mangroves to wind loads, which are much larger than wave loads, and can cause tree failure during cyclones. These results stress the importance of including tree surface area and stability models when predicting coastal protection by mangroves.


  • Open Access

    Integrating mangroves in dike designs: effect of tree growth and failure

    by Alejandra Gijón Mancheño, Vincent Vuik, Bregje (B.K.) van Wesenbeeck, Bas (S.N.) Jonkman, Rosanna van Hespen, Swarna Kazi, Ignacio Urrutia, Mathijs van Ledden, Roelof (J.R.

    Mangrove forests reduce wave attack along tropical coastlines, decreasing the design requirements of coastal embankments. Wave reduction by mangroves depends on their surface area and stability against storms, but both aspects are often oversimplified or neglected in coastal protection designs. Here we present a framework to evaluate how mangrove belts influence embankment designs, including mangrove growth and failure by overturning and trunk breakage. This methodology is applied to Sonneratia apetala mangroves seawards from embankments in Bangladesh, considering forest widths between 10-1000 m (cross-shore). For design water levels of 5 m, wave reduction by mangrove forests shorter than 1 km mostly affects the slope protection and the bank erodibility, whereas the embankment height is less influenced by mangroves. Sonneratia apetala trees induce a relative maximum in wave attenuation by 10 years old, due to their large submerged canopy area. Once trees grow older than 20 years old, their canopy is emergent, and most wave attenuation is caused by trunk and roots. Canopy emergence exposes mangroves to wind loads, which are much larger than wave loads, and can cause tree failure during cyclones. These results stress the importance of including tree surface area and stability models when predicting coastal protection by mangroves.


  • Open Access

    Optimising the wave attenuation of bamboo fences using the numerical wave model SWASH

    by Marijn Alferink, Alejandra Gijon Mancheno, Tomohiro Suzuki, Ad Reniers

    Mangroves protect tropical coastlines from flooding and erosion, reducing flood risks along coastal communities worldwide. Nevertheless, mangrove forests have experienced considerable losses due to activities like urbanization and aquaculture, exposing coastal areas to wave attack. To restore mangroves at eroding coastlines, structures formed by bamboo poles and a brushwood filling are used to shelter the coast from waves, and create a favourable habitat for mangrove colonization. However, these structures often lose their brushwood filling during storms, resulting in high maintenance costs. This study proposes a new type of design to reduce maintenance expenses, consisting of only vertical bamboo poles without a filling of brushwood. Structure designs are evaluated for a case study in Demak, Indonesia, using the numerical wave model SWASH to predict wave attenuation through the structures. Field measurements and WaveWatch III data are analyzed to obtain the design conditions for the structures in Demak. SWASH is validated against laboratory experiments, and applied to investigate the optimum number of rows and their optimum spacing (in the direction of wave propagation). The model shows that for a structure consisting of two rows of bamboo poles, the transmission rate Et/Ei decreases from 75% to 55% when the row spacing in the wave direction is increased from sx = 0.42 m to sx = 5.8 m. Larger spacings do not result in less transmission, and at least three rows are needed to have a transmission rate lower than 50 % - a common wave reduction target used in restoration efforts with structures. This study thus identifies potential strategies to maximize wave attenuation by bamboo structures, which can be used to reduce wave attack along muddy coasts without the need of a brushwood filling. Hereby, it provides an economically and user friendly alternative with respect to the previous brushwood structure designs, as it requires less material costs and maintenance. In addition, this study presents a new method to schematize these kind of structures in SWASH in an efficient way.


  • Open Access

    Mapping Mangrove Opportunities with Open Access Data: A Case Study for Bangladesh

    by Alejandra Gijón Mancheño, Peter M. J. Herman, Sebastiaan N. Jonkman, Swarna Kazi, Ignacio Urrutia, Mathijs van Ledden

    Mangroves protect coastal areas against hazards like storms or cyclones by attenuating waves and currents, and by trapping floating debris during extreme events. Bangladesh is a very vulnerable country to floods and cyclones, and part of its coastal system is thus being upgraded to a higher safety standard. These upgrades include embankment reinforcement and mangrove afforestation schemes seawards of the embankments. To further strengthen the implementation of combined green–grey infrastructure in future programs, identifying potential mangrove development sites near the polder systems is a necessary first step. We thus developed a tool to systematically identify mangrove sites throughout the coastal area based on open access data. This method identifies potential sites for mangrove development based on their distance from existing mangrove patches and suggests the required technique to implement the vegetation depending on the rate of coastline change. Our method showed that approximately 600 km of the coastal stretches placed seawards of embankments are within 10 km of existing mangroves, and could thus be potential sites for mangrove establishment. Out of those 600 km, we identified 140 km of coastline where the landwards polders are particularly vulnerable to flooding. The sites with highest restoration potential and priority are located in Galachipa, Hatiya, Bhola, Manpura, Khangona, and Boro Moheshkhali. More detailed data collection and local assessments are recommended prior to executing mangrove afforestation schemes. Nevertheless, this method could serve as a useful systematic tool for feasibility studies that identify mangrove opportunities in data-scarce areas and help to prioritize data collection at the sites of highest interest.


  • Open Access

    Predictive model of bulk drag coefficient for a nature-based structure exposed to currents

    by Alejandra Gijón Mancheño, Wiljan Jansen, Johan C. Winterwerp, Wim S. J. Uijttewaal

    Mangrove vegetation provides natural protection against coastal hazards like flooding and erosion. In spite of their economic and societal value, mangrove forests have experienced a worldwide decline due to human activities. Bamboo structures, formed by poles driven into the soil, are being used to create a sheltered environment for mangrove restoration. The lack of design rules for the structures has led to mixed success rates in their implementation. Improving future designs requires a better understanding of how the bamboo poles affect waves and currents. Currents cause drag forces on the poles, which depend on flow acceleration through the elements (blockage), and the distance from wakes of upstream cylinders (sheltering). We developed a model that predicts the bulk drag coefficient of dense arrays of emergent cylinders in a current, including blockage, sheltering and a balance between turbulence production and dissipation. The model could reproduce measured bulk drag coefficients from the literature within a deviation of 20%. The model also showed that anisotropic structures with small spanwise spacing and large streamwise separation maximize the bulk drag coefficient, and the energy dissipation per pole. The application of the model can guide the design of future mangrove restoration efforts.