SeyedVahid Hosseini
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
SeyedVahid Hosseini has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
Mahmoud Chizari
University of Hertfordshire, Hatfield, AL10 9AB, UK
6 shared publicationsSeyed Hossein Madani
NEX Power Ltd., Milton Keynes, MK11 3JB, UK
6 shared publicationsYong Chen
University of Hertfordshire, Hatfield, AL10 9AB, UK
4 shared publicationsAli Izadi
Samad Power Ltd
3 shared publicationsSara Hatami
Samad Power Ltd
2 shared publicationsSara Soodani
Iran University of Science and Technology
2 shared publications
Latest Publications
- Open Access
- 12 August 2023
- Published by Springer Nature
- p. 351-360
Development of an Affordable MGT-CHP for Domestic Applications
The micro gas turbine (MGT) is considered one of the main solutions for the future power generation system to provide secure and stable energy. Thanks to its multi-fuel capability and high values of power-to-weight ratio, it is a suitable candidate for many applications such as Combined Heat and Power (CHP) systems, range extenders, and auxiliary power units. Among these applications, the micro-CHP system benefits from both the electricity and exhaust heat of the MGT for household or industrial process applications. The MGT could be integrated with a heat exchanger to introduce a CHP boiler to the domestic boiler market. To reduce the cost and size of the package and to compete with a traditional boiler the simple Brayton cycle without the recuperator is considered and all of the useful energy in the exhaust gas is transferred to the heat exchanger to provide hot water. To further reduce the cost of the system to compete in the market, off-the-shelf components were adopted in this project. In this article, the development process of this product is presented including conceptual design based on the type and size of the market. It follows with an evaluation of off-the-shelf compressor and turbine modulus from the automotive turbochargers to match the operating conditions. Here, the MGT is designed in a way that can be adapted to the boilers with minimum components change. A high-speed alternator was powered with a tie grid drive/inverter to enable a bi-directional connection of the power unit to the network. A comparison between the product definition and experimental results of a demonstrator prototype is presented which reveals gaps between design and prototype outcomes. Analysis shows that 23% of the power degradation can be recovered by enhancing the cooling. Potential development and improvement scenarios are addressed for future development.
- 12 August 2023
- Published by Springer Nature
- p. 351-360
Open AccessDevelopment of an Affordable MGT-CHP for Domestic Applications
The micro gas turbine (MGT) is considered one of the main solutions for the future power generation system to provide secure and stable energy. Thanks to its multi-fuel capability and high values of power-to-weight ratio, it is a suitable candidate for many applications such as Combined Heat and Power (CHP) systems, range extenders, and auxiliary power units. Among these applications, the micro-CHP system benefits from both the electricity and exhaust heat of the MGT for household or industrial process applications. The MGT could be integrated with a heat exchanger to introduce a CHP boiler to the domestic boiler market. To reduce the cost and size of the package and to compete with a traditional boiler the simple Brayton cycle without the recuperator is considered and all of the useful energy in the exhaust gas is transferred to the heat exchanger to provide hot water. To further reduce the cost of the system to compete in the market, off-the-shelf components were adopted in this project. In this article, the development process of this product is presented including conceptual design based on the type and size of the market. It follows with an evaluation of off-the-shelf compressor and turbine modulus from the automotive turbochargers to match the operating conditions. Here, the MGT is designed in a way that can be adapted to the boilers with minimum components change. A high-speed alternator was powered with a tie grid drive/inverter to enable a bi-directional connection of the power unit to the network. A comparison between the product definition and experimental results of a demonstrator prototype is presented which reveals gaps between design and prototype outcomes. Analysis shows that 23% of the power degradation can be recovered by enhancing the cooling. Potential development and improvement scenarios are addressed for future development.
- Open Access
- 12 August 2023
- Published by Springer Nature
- p. 341-350
The Effect of Vane Number in Casing Treatment of an Axial-Flow Compressor
Improvement of the operating range of compressors will help the power and energy plant to work more flexibly to integrate with other energy generation systems. The stall, rotating stall, and resulting surge are the most dominant limiting phenomenon in axial compressor operating envelop. Several active and passive methods have been employed to eliminate occurring of these phenomena and to extend compressors’ stable range. Among these, casing treatment is one of the most useful methods. This study aims to investigate the effect of the number of stationary blades on the performance and stall margin of an axial compressor through numerical simulation. Casing treatments in two different configurations of 33.3 and 53.5% of rotor blade tip exposure and with six different numbers of vanes, 30, 40, 60, 80, 90, and 120, are simulated with computational fluid dynamics in ANSYS software. The numerical simulation is validated with available experimental data. The results reveal that in a high rotor exposure configuration, the highest number of vanes provides the best performance for the compressor. However, in a low exposure configuration, the optimum number of the vanes, 90 for the 33.3% exposure, can be found with the proposed numerical procedure based on stall margin improvement.
- 12 August 2023
- Published by Springer Nature
- p. 341-350
Open AccessThe Effect of Vane Number in Casing Treatment of an Axial-Flow Compressor
Improvement of the operating range of compressors will help the power and energy plant to work more flexibly to integrate with other energy generation systems. The stall, rotating stall, and resulting surge are the most dominant limiting phenomenon in axial compressor operating envelop. Several active and passive methods have been employed to eliminate occurring of these phenomena and to extend compressors’ stable range. Among these, casing treatment is one of the most useful methods. This study aims to investigate the effect of the number of stationary blades on the performance and stall margin of an axial compressor through numerical simulation. Casing treatments in two different configurations of 33.3 and 53.5% of rotor blade tip exposure and with six different numbers of vanes, 30, 40, 60, 80, 90, and 120, are simulated with computational fluid dynamics in ANSYS software. The numerical simulation is validated with available experimental data. The results reveal that in a high rotor exposure configuration, the highest number of vanes provides the best performance for the compressor. However, in a low exposure configuration, the optimum number of the vanes, 90 for the 33.3% exposure, can be found with the proposed numerical procedure based on stall margin improvement.
- Open Access
- 1 January 2023
- Published by European Turbomachinery Society
Design Optimisation and Manufacturing Challenges of Micro Turbine Wheel
Micro gas turbine (MGT) is a core technology in many hybrid and integrated power systems to address the low-emission future aviation and decentralization of energy generation. To achieve a high power-to-weight ratio as well as lowering the required maintenance, a new compact configuration with an air-bearing compartment was developed to build a 2 kW micro gas turbine in which designing a turbine wheel faced a multi-disciplinary problem with many inputs and constraints in aerodynamic, heat transfer, strength, and manifesting aspects. To meet all requirements of these aspects, a design procedure is proposed in this paper. Since the manufacturing process affects the performance and life of the system, several processes including casting, additive manufacturing (AM) and machining of the turbine wheel with different materials were carried out and the structural strength and performance of the components were investigated in this study. The prototype was tested experimentally to prove the performance and validate the concept. The casted wheel demonstrated both the required performance of 2 kW power output of the MGT in turbine inlet temperature of 1200 K and rotational speed of 170 krpm. However, the initial machined and additive manufactured samples for low-temperature/low-speed off-design conditions did not withstand structurally and called for a re-design.
- 1 January 2023
- Published by European Turbomachinery Society
Open AccessDesign Optimisation and Manufacturing Challenges of Micro Turbine Wheel
Micro gas turbine (MGT) is a core technology in many hybrid and integrated power systems to address the low-emission future aviation and decentralization of energy generation. To achieve a high power-to-weight ratio as well as lowering the required maintenance, a new compact configuration with an air-bearing compartment was developed to build a 2 kW micro gas turbine in which designing a turbine wheel faced a multi-disciplinary problem with many inputs and constraints in aerodynamic, heat transfer, strength, and manifesting aspects. To meet all requirements of these aspects, a design procedure is proposed in this paper. Since the manufacturing process affects the performance and life of the system, several processes including casting, additive manufacturing (AM) and machining of the turbine wheel with different materials were carried out and the structural strength and performance of the components were investigated in this study. The prototype was tested experimentally to prove the performance and validate the concept. The casted wheel demonstrated both the required performance of 2 kW power output of the MGT in turbine inlet temperature of 1200 K and rotational speed of 170 krpm. However, the initial machined and additive manufactured samples for low-temperature/low-speed off-design conditions did not withstand structurally and called for a re-design.
- Open Access
Multi-Fidelity Combustor Design and Experimental Test for a Micro Gas Turbine System
A multi-fidelity micro combustor design approach is developed for a small-scale combined heat and power CHP system. The approach is characterised by the coupling of the developed preliminary design model using the combined method of 3D high-fidelity modelling and experimental testing. The integrated multi-physics schemes and their underlying interactions are initially provided. During the preliminary design phase, the rapid design exploration is achieved by the coupled reduced-order models, where the details of the combustion chamber layout, flow distributions, and burner geometry are defined as well as basic combustor performance. The high-fidelity modelling approach is then followed to provide insights into detailed flow and emission physics, which explores the effect of design parameters and optimises the design. The combustor is then fabricated and assembled in the MGT test bench. The experimental test is performed and indicates that the designed combustor is successfully implemented in the MGT system. The multi-physics models are then verified and validated against the test data. The details of refinement on lower-order models are given based on the insights acquired by high-fidelity methods. The shortage of conventional fossil fuels and the continued demand for energy supplies have led to the development of a micro-turbine system running renewable fuels. Numerical analysis is then carried out to assess the potential operation of biogas in terms of emission and performance. It produces less NOx emission but presents a flame stabilisation design challenge at lower methane content. The details of the strategy to address the flame stabilisation are also provided.
Open AccessMulti-Fidelity Combustor Design and Experimental Test for a Micro Gas Turbine System
A multi-fidelity micro combustor design approach is developed for a small-scale combined heat and power CHP system. The approach is characterised by the coupling of the developed preliminary design model using the combined method of 3D high-fidelity modelling and experimental testing. The integrated multi-physics schemes and their underlying interactions are initially provided. During the preliminary design phase, the rapid design exploration is achieved by the coupled reduced-order models, where the details of the combustion chamber layout, flow distributions, and burner geometry are defined as well as basic combustor performance. The high-fidelity modelling approach is then followed to provide insights into detailed flow and emission physics, which explores the effect of design parameters and optimises the design. The combustor is then fabricated and assembled in the MGT test bench. The experimental test is performed and indicates that the designed combustor is successfully implemented in the MGT system. The multi-physics models are then verified and validated against the test data. The details of refinement on lower-order models are given based on the insights acquired by high-fidelity methods. The shortage of conventional fossil fuels and the continued demand for energy supplies have led to the development of a micro-turbine system running renewable fuels. Numerical analysis is then carried out to assess the potential operation of biogas in terms of emission and performance. It produces less NOx emission but presents a flame stabilisation design challenge at lower methane content. The details of the strategy to address the flame stabilisation are also provided.
- Open Access
- 30 April 2021
- Published by Springer Nature
- p. 155-162
Design Procedure of a Hybrid Renewable Power Generation System
Electrification of small communities in districted off-grid area remains as a challenge for power generation industries. In the current study, various aspects of design of a standalone renewable power plant are examined and implemented in a case study of a rural area in Cape Town, South Africa. Estimating required electricity based on local demand profile, investment, operability, and maintenance costs of different generation technologies are studied in order to investigate their potential in an off-grid clean energy generation system. Several configurations of hybridization of solar system, wind, and micro gas turbine in combination with a battery are investigated. The Levelized Cost of Electricity (LCOE) and number of days with more than 3 h black out are compared.
- 30 April 2021
- Published by Springer Nature
- p. 155-162
Open AccessDesign Procedure of a Hybrid Renewable Power Generation System
Electrification of small communities in districted off-grid area remains as a challenge for power generation industries. In the current study, various aspects of design of a standalone renewable power plant are examined and implemented in a case study of a rural area in Cape Town, South Africa. Estimating required electricity based on local demand profile, investment, operability, and maintenance costs of different generation technologies are studied in order to investigate their potential in an off-grid clean energy generation system. Several configurations of hybridization of solar system, wind, and micro gas turbine in combination with a battery are investigated. The Levelized Cost of Electricity (LCOE) and number of days with more than 3 h black out are compared.
- Open Access
- 30 April 2021
- Published by Springer Nature
- p. 171-177
Optimal Design of Environmental-Friendly Hybrid Power Generation System
Combination of both renewable and fuel-based generation systems is an advantageous approach to develop off-grid distributed power plants. This approach requires evaluation of the techno-economic potential of each source in a selected site as well as optimization of load sharing strategy between them. Development of a remote hybrid power plant in an off-grid area is the interest of this study. Defining all available combinations, characteristics of performance, cost and availability of them evaluated. Applying constraints, multi-objective target domain based on load following and Levelized Cost of Electricity is established in which by utilizing Pareto front approach, optimized scenarios is achieved.
- 30 April 2021
- Published by Springer Nature
- p. 171-177
Open AccessOptimal Design of Environmental-Friendly Hybrid Power Generation System
Combination of both renewable and fuel-based generation systems is an advantageous approach to develop off-grid distributed power plants. This approach requires evaluation of the techno-economic potential of each source in a selected site as well as optimization of load sharing strategy between them. Development of a remote hybrid power plant in an off-grid area is the interest of this study. Defining all available combinations, characteristics of performance, cost and availability of them evaluated. Applying constraints, multi-objective target domain based on load following and Levelized Cost of Electricity is established in which by utilizing Pareto front approach, optimized scenarios is achieved.
- 19 February 2021
- Published by Springer Nature
- p. 791-803
Analytical Modelling of Electromagnetic Bulging of Thin Metallic Tubes
- 19 February 2021
- Published by Springer Nature
- p. 791-803
Analytical Modelling of Electromagnetic Bulging of Thin Metallic Tubes