Qian Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qian Chen has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Yuwei Cheng
School of Aeronautics and Astronautics, Sun Yat-sen University, Shenzhen 518107, China
4 shared publications - Xiaofei Niu
School of Aeronautics and Astronautics, Shenzhen Campus of Sun Yat-sen University, Shenzhen 518107, China
3 shared publications - Zhengqi Tai
School of Aeronautics and Astronautics, Shenzhen Campus of Sun Yat-sen University, Shenzhen 518107, China
2 shared publications Chuntao Hong
School of Aeronautics and Astronautics, Sun Yat-sen University, Shenzhen, China
1 shared publication- Haizhao Liang
Sun Yat-sen University
1 shared publication - Hesen Yang
National Key Lab of Aerospace Power System and Plasma Technology, Air Force Engineering University, Xi’an 710038, China
1 shared publication
Latest Publications
- Open Access
Proper Flowpath Configurations of Circular Scramjet Combustor for High-Performance Propulsion
The flowpath configuration of a scramjet combustor decisively governs its combustion performance. Scramjet combustors are generally classified into rectangular and circular cross-section types. For circular cross-section combustors, numerous flowpath configurations have been proposed worldwide, accompanied by extensive numerical simulations and experimental investigations. This paper systematically reviews proper flowpath configurations for circular cross-section scramjet combustors. It first discusses wall configurations, then examines cavity flameholders, strut flameholders, and other flowpath arrangements. Key geometrical parameters, including wall shape, cavity geometry, strut layout, and their coupling effects, are considered. The influences of these configurations on combustor performance are briefly analyzed, with particular attention to fuel mixing, flame stabilization, and combustion efficiency. Finally, the current research status of circular scramjet combustor geometric design is summarized, and future development prospects are outlined. By consolidating existing knowledge and identifying remaining challenges, this review aims to provide a useful reference for the optimal design of circular cross-section scramjet combustors and to support further advances in high-performance propulsion systems.
Open AccessProper Flowpath Configurations of Circular Scramjet Combustor for High-Performance Propulsion
The flowpath configuration of a scramjet combustor decisively governs its combustion performance. Scramjet combustors are generally classified into rectangular and circular cross-section types. For circular cross-section combustors, numerous flowpath configurations have been proposed worldwide, accompanied by extensive numerical simulations and experimental investigations. This paper systematically reviews proper flowpath configurations for circular cross-section scramjet combustors. It first discusses wall configurations, then examines cavity flameholders, strut flameholders, and other flowpath arrangements. Key geometrical parameters, including wall shape, cavity geometry, strut layout, and their coupling effects, are considered. The influences of these configurations on combustor performance are briefly analyzed, with particular attention to fuel mixing, flame stabilization, and combustion efficiency. Finally, the current research status of circular scramjet combustor geometric design is summarized, and future development prospects are outlined. By consolidating existing knowledge and identifying remaining challenges, this review aims to provide a useful reference for the optimal design of circular cross-section scramjet combustors and to support further advances in high-performance propulsion systems.
- Open Access
- 8 December 2025
- Published by Springer Nature in Propulsion and Energy
- Vol. 1 (1) , 19
Shock wave enhanced turbulent mixing in a wide-speed-range strut-based scramjet combustor
The efficient mixing of fuel and oxidizer in a scramjet combustor is a critical issue for achieving future wide-speed-range flight. A numerical study is conducted using Reynolds-averaged Navier–Stokes equations coupled with shear stress transport k - ω turbulence model to investigate the mixing characteristics of hydrogen and air in a wide-speed-range supersonic combustor. Validation case using the numerical simulations shows remarkable consistency with experimental observations, confirming the reliability and accuracy of the computational approach. The results indicate that during a wide-speed-range flight, the enhancement effect of shock waves on the growth of the mixing region thickness within the combustor persists. This is attributed to the baroclinic torque and volumetric expansion effects caused by the interaction of shock waves and the turbulent shear layer, which enhance vorticity. When the combustor entrance Mach number is relatively low, this enhancement effect is more pronounced. As the combustor entrance Mach number increases, the enhancement effect gradually decreases. The area of the fuel–air mixing region decreases significantly as the combustor entrance Mach number increases, with this reduction being more pronounced at a low equivalence ratio compared to a higher one. The mixing efficiency of the fuel–air decreases with increasing combustor entrance Mach number. At a low equivalence ratio, a higher combustor entrance Mach number delays the location of full mixing. At a higher equivalence ratio, increasing the combustor entrance Mach number may result in the fuel and air remaining incompletely mixed by the time they reach the combustor exit.
- 8 December 2025
- Published by Springer Nature in Propulsion and Energy
- Vol. 1 (1) , 19
Open AccessShock wave enhanced turbulent mixing in a wide-speed-range strut-based scramjet combustor
The efficient mixing of fuel and oxidizer in a scramjet combustor is a critical issue for achieving future wide-speed-range flight. A numerical study is conducted using Reynolds-averaged Navier–Stokes equations coupled with shear stress transport k - ω turbulence model to investigate the mixing characteristics of hydrogen and air in a wide-speed-range supersonic combustor. Validation case using the numerical simulations shows remarkable consistency with experimental observations, confirming the reliability and accuracy of the computational approach. The results indicate that during a wide-speed-range flight, the enhancement effect of shock waves on the growth of the mixing region thickness within the combustor persists. This is attributed to the baroclinic torque and volumetric expansion effects caused by the interaction of shock waves and the turbulent shear layer, which enhance vorticity. When the combustor entrance Mach number is relatively low, this enhancement effect is more pronounced. As the combustor entrance Mach number increases, the enhancement effect gradually decreases. The area of the fuel–air mixing region decreases significantly as the combustor entrance Mach number increases, with this reduction being more pronounced at a low equivalence ratio compared to a higher one. The mixing efficiency of the fuel–air decreases with increasing combustor entrance Mach number. At a low equivalence ratio, a higher combustor entrance Mach number delays the location of full mixing. At a higher equivalence ratio, increasing the combustor entrance Mach number may result in the fuel and air remaining incompletely mixed by the time they reach the combustor exit.
- 25 September 2025
- Published by Springer Nature in Advances in Astronautics
- Vol. 8 (4) , 433-458
Shock Wave Generator Affected Vorticity Transport in a strut-based Scramjet Combustor
- 25 September 2025
- Published by Springer Nature in Advances in Astronautics
- Vol. 8 (4) , 433-458
Shock Wave Generator Affected Vorticity Transport in a strut-based Scramjet Combustor
- 7 July 2025
- Published by Springer Nature in Advances in Astronautics
- Vol. 8 (3) , 303-326
Proper Wall Divergence for Strut-Based Scramjet Combustors in Aerospace Propulsion
- 7 July 2025
- Published by Springer Nature in Advances in Astronautics
- Vol. 8 (3) , 303-326
Proper Wall Divergence for Strut-Based Scramjet Combustors in Aerospace Propulsion
- Open Access
Large Eddy Simulation and Dynamic Mode Decomposition of Supersonic Combustion Instability in a Strut-Based Scramjet Combustor
Supersonic combustion instability studies are crucial for the future maturation of scramjet engines. In the present paper, the supersonic combustion instability in a strut-based scramjet combustor is investigated through large eddy simulation and dynamic mode decomposition. The results show significant pressure oscillation in the strut-based scramjet combustor when the air parameters at the combustor inlet and the fuel parameters at the injector outlet are under certain conditions, and these pressure oscillation situations correspond to supersonic combustion instability. The oscillations have multiple dominant frequencies, including relatively low frequency of 2984 Hz, high frequency of 62,180 Hz, and very high frequency of 110,562 Hz. Large pressure oscillations in the strut-based scramjet combustor are closely related to wake instability, shear layer instability, shear layer and wave interactions, and combustion. Reducing the air total temperature at the combustor inlet can attenuate the pressure oscillations, and reducing the fuel flow rate at the injector outlet can also attenuate the pressure oscillations.
Open AccessLarge Eddy Simulation and Dynamic Mode Decomposition of Supersonic Combustion Instability in a Strut-Based Scramjet Combustor
Supersonic combustion instability studies are crucial for the future maturation of scramjet engines. In the present paper, the supersonic combustion instability in a strut-based scramjet combustor is investigated through large eddy simulation and dynamic mode decomposition. The results show significant pressure oscillation in the strut-based scramjet combustor when the air parameters at the combustor inlet and the fuel parameters at the injector outlet are under certain conditions, and these pressure oscillation situations correspond to supersonic combustion instability. The oscillations have multiple dominant frequencies, including relatively low frequency of 2984 Hz, high frequency of 62,180 Hz, and very high frequency of 110,562 Hz. Large pressure oscillations in the strut-based scramjet combustor are closely related to wake instability, shear layer instability, shear layer and wave interactions, and combustion. Reducing the air total temperature at the combustor inlet can attenuate the pressure oscillations, and reducing the fuel flow rate at the injector outlet can also attenuate the pressure oscillations.
- Open Access
Plasma Actuation for the Turbulent Mixing of Fuel Droplets and Oxidant Air in an Aerospace Combustor
In order to explore plasma-assisted turbulent mixing in aerospace engines, the dielectric barrier discharge plasma actuation for the turbulent mixing of fuel droplets and oxidant air in a ramjet combustor was studied using computational fluid dynamics. A two-way coupling of turbulent air and discrete droplets was realized by Eulerian–Lagrangian simulation, and the dielectric barrier discharge plasma action on flow was modeled by body force. The results show that the plasma actuation can rearrange the recirculation zone behind the evaporative V-groove flameholder, and the main mechanism of actuation is to increase the local momentum of the fluid; the actuation dimension, actuation intensity, and actuation position of the dielectric barrier discharge plasma have strong effects on the turbulent mixing of fuel droplets and oxidant air; and a relatively optimal turbulent mixing can be achieved by adjusting the actuation parameters.
Open AccessPlasma Actuation for the Turbulent Mixing of Fuel Droplets and Oxidant Air in an Aerospace Combustor
In order to explore plasma-assisted turbulent mixing in aerospace engines, the dielectric barrier discharge plasma actuation for the turbulent mixing of fuel droplets and oxidant air in a ramjet combustor was studied using computational fluid dynamics. A two-way coupling of turbulent air and discrete droplets was realized by Eulerian–Lagrangian simulation, and the dielectric barrier discharge plasma action on flow was modeled by body force. The results show that the plasma actuation can rearrange the recirculation zone behind the evaporative V-groove flameholder, and the main mechanism of actuation is to increase the local momentum of the fluid; the actuation dimension, actuation intensity, and actuation position of the dielectric barrier discharge plasma have strong effects on the turbulent mixing of fuel droplets and oxidant air; and a relatively optimal turbulent mixing can be achieved by adjusting the actuation parameters.
- Open Access
Supersonic Combustion Modeling and Simulation on General Platforms
Supersonic combustion is an advanced technology for the next generation of aerospace vehicles. In the last two decades, numerical simulation has been widely used for the investigation on supersonic combustion. In this paper, the modeling and simulation of supersonic combustion on general platforms are thoroughly reviewed, with emphasis placed on turbulence modeling and turbulence–chemistry interactions treatment which are both essential for engineering computation of supersonic combustion. It is found that the Reynolds-averaged Navier–Stokes methods on the general platforms have provided useful experience for the numerical simulation in engineering design of supersonic combustion, while the large eddy simulation methods need to be widely utilized and further developed on these platforms. Meanwhile, the species transport models as a kind of reasonable combustion model accounting for the turbulence–chemistry interactions in supersonic combustion have achieved good results. With the development of new combustion models, especially those designed in recent years for high-speed combustion, the turbulence–chemistry interactions treatment for numerical simulation of supersonic combustion based on general platforms is expected to be further mature in the future.
Open AccessSupersonic Combustion Modeling and Simulation on General Platforms
Supersonic combustion is an advanced technology for the next generation of aerospace vehicles. In the last two decades, numerical simulation has been widely used for the investigation on supersonic combustion. In this paper, the modeling and simulation of supersonic combustion on general platforms are thoroughly reviewed, with emphasis placed on turbulence modeling and turbulence–chemistry interactions treatment which are both essential for engineering computation of supersonic combustion. It is found that the Reynolds-averaged Navier–Stokes methods on the general platforms have provided useful experience for the numerical simulation in engineering design of supersonic combustion, while the large eddy simulation methods need to be widely utilized and further developed on these platforms. Meanwhile, the species transport models as a kind of reasonable combustion model accounting for the turbulence–chemistry interactions in supersonic combustion have achieved good results. With the development of new combustion models, especially those designed in recent years for high-speed combustion, the turbulence–chemistry interactions treatment for numerical simulation of supersonic combustion based on general platforms is expected to be further mature in the future.
- Open Access
- 21 January 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (3) , 1128
Aerodynamic Characteristics of Morphing Supercritical Airfoils for Aircraft with All-Stage High Performance
Morphing airfoil is a promising technology for future aircraft to realize all-stage high performance. In the present paper, a conceptual aircraft with morphing airfoil is proposed and the aerodynamic characteristics of three types of morphing airfoils (variable-camber airfoil, variable-chord airfoil, and the combination of both morphing styles) are numerically investigated. The baseline airfoil is RAE 2822 supercritical airfoil; the Reynolds-averaged Navier–Stokes method is adopted for numerical simulation of flow around airfoils, and the accuracy of the numerical simulation method is validated by comparing with experimental data. It is found that the variable-camber and -chord airfoil can not only improve the high lift characteristics at take-off stage, but also increase the lift-to-drag ratio at transonic cruise and low-speed task stages during which the required lift is continuously decreasing due to the consumption of fuel. These findings imply that aircraft with proper morphing airfoil can achieve all-stage high aerodynamic performance.
- 21 January 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (3) , 1128
Open AccessAerodynamic Characteristics of Morphing Supercritical Airfoils for Aircraft with All-Stage High Performance
Morphing airfoil is a promising technology for future aircraft to realize all-stage high performance. In the present paper, a conceptual aircraft with morphing airfoil is proposed and the aerodynamic characteristics of three types of morphing airfoils (variable-camber airfoil, variable-chord airfoil, and the combination of both morphing styles) are numerically investigated. The baseline airfoil is RAE 2822 supercritical airfoil; the Reynolds-averaged Navier–Stokes method is adopted for numerical simulation of flow around airfoils, and the accuracy of the numerical simulation method is validated by comparing with experimental data. It is found that the variable-camber and -chord airfoil can not only improve the high lift characteristics at take-off stage, but also increase the lift-to-drag ratio at transonic cruise and low-speed task stages during which the required lift is continuously decreasing due to the consumption of fuel. These findings imply that aircraft with proper morphing airfoil can achieve all-stage high aerodynamic performance.
- Open Access
- 20 December 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (24) , 12127
Large Eddy Simulation and Dynamic Mode Decomposition of Turbulent Mixing Layers
Turbulent mixing layers are canonical flow in nature and engineering, and deserve comprehensive studies under various conditions using different methods. In this paper, turbulent mixing layers are investigated using large eddy simulation and dynamic mode decomposition. The accuracy of the computations is verified and validated. Standard dynamic mode decomposition is utilized to flow decomposition, reconstruction and prediction. It was found that the dominant-mode selection criterion based on mode amplitude is more suitable for turbulent mixing layer flow compared with the other three criteria based on singular value, modal energy and integral modal amplitude, respectively. For the mixing layer with random disturbance, the standard dynamic mode decomposition method could accurately reconstruct and predict the region before instability happens, but is not qualified in the regions after that, which implies that improved dynamic mode decomposition methods need to be utilized or developed for the future dynamic mode decomposition of turbulent mixing layers.
- 20 December 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (24) , 12127
Open AccessLarge Eddy Simulation and Dynamic Mode Decomposition of Turbulent Mixing Layers
Turbulent mixing layers are canonical flow in nature and engineering, and deserve comprehensive studies under various conditions using different methods. In this paper, turbulent mixing layers are investigated using large eddy simulation and dynamic mode decomposition. The accuracy of the computations is verified and validated. Standard dynamic mode decomposition is utilized to flow decomposition, reconstruction and prediction. It was found that the dominant-mode selection criterion based on mode amplitude is more suitable for turbulent mixing layer flow compared with the other three criteria based on singular value, modal energy and integral modal amplitude, respectively. For the mixing layer with random disturbance, the standard dynamic mode decomposition method could accurately reconstruct and predict the region before instability happens, but is not qualified in the regions after that, which implies that improved dynamic mode decomposition methods need to be utilized or developed for the future dynamic mode decomposition of turbulent mixing layers.