Kaushal Modha
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kaushal Modha has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- C Suthar Manoj
Department of Genetics and Plant Breeding, Navsari Agricultural University, Navsari 396 450, Gujarat, India
3 shared publications - Kale Bhushan
Department of Genetics and Plant Breeding, Navsari Agricultural University, Navsari 396 450, Gujarat, India
3 shared publications - P Chandramaniya Chirag
Department of Genetics and Plant Breeding, Anand Agricultural University, Anand 388 110, Gujarat, India
3 shared publications Ritesh Patel
Department of Genetics and Plant Breeding, N. M. College of Agriculture, Navsari Agricultural University, Navsari, India
3 shared publications- Savaliya Denish
Department of Genetics and Plant Breeding, Navsari Agricultural University, Navsari 396 450, Gujarat, India
3 shared publications - Vipulkumar B. Parekh
Department of Basic Science and Humanity, College of Forestry, Navsari Agricultural University, Navsari 396 450, Gujarat, India
3 shared publications
Latest Publications
- Open Access
- 1 August 2026
- Published by Horizon E-Publishing Group in Plant Science Today
- Vol. 13 (3)
Six-parameter genetic analysis of yield and fibre quality traits in upland cotton (Gossypium hirsutum L.)
Cotton (Gossypium hirsutum L.) is a major commercial crop and an important source of natural fibre, making the understanding of its genetic architecture essential for crop improvement. The present study employed generation mean analysis using six generations (P₁, P₂, F₁, F₂, BC₁ and BC₂) to investigate the nature of gene action governing yield-contributing and fibre quality traits. Significant scaling tests and chi-square (X2) values for several traits indicated the presence of epistatic gene interactions. The analysis revealed that both additive and non-additive gene effects contributed to trait inheritance, with duplicate epistasis predominating for several economically important traits. These findings suggest that the inheritance of yield and fibre quality traits is complex, involving multiple gene interactions. Therefore, breeding strategies that exploit both additive and non-additive genetic variation, including selection in advanced generations and population improvement approaches, are likely to be more effective for developing superior cotton genotypes.
- 1 August 2026
- Published by Horizon E-Publishing Group in Plant Science Today
- Vol. 13 (3)
Open AccessSix-parameter genetic analysis of yield and fibre quality traits in upland cotton (Gossypium hirsutum L.)
Cotton (Gossypium hirsutum L.) is a major commercial crop and an important source of natural fibre, making the understanding of its genetic architecture essential for crop improvement. The present study employed generation mean analysis using six generations (P₁, P₂, F₁, F₂, BC₁ and BC₂) to investigate the nature of gene action governing yield-contributing and fibre quality traits. Significant scaling tests and chi-square (X2) values for several traits indicated the presence of epistatic gene interactions. The analysis revealed that both additive and non-additive gene effects contributed to trait inheritance, with duplicate epistasis predominating for several economically important traits. These findings suggest that the inheritance of yield and fibre quality traits is complex, involving multiple gene interactions. Therefore, breeding strategies that exploit both additive and non-additive genetic variation, including selection in advanced generations and population improvement approaches, are likely to be more effective for developing superior cotton genotypes.
- Open Access
- 9 February 2026
- Published by EJPB, ISPB, CPBG - Tamil Nadu Agricultural University in Electronic Journal of Plant Breeding
- Vol. 10 (01) , 297-302
Inheritance pattern of photoperiod responsive flowering, growth habit and flower colour in Indian bean [Lablab purpureus (L.) Sweet.]
Photoperiod responsive flowering and growth habit have played key role in evolution and domestication of Indian bean. Most of the land races of this crop exhibit photoperiod sensitive flowering and indeterminate growth habit. To deduce inheritance pattern of photoperiod responsive flowering, growth habit and flower colour, four crosses were made between genotypes having extreme phenotypes keeping determinate and photoperiod insensitive variety GNIB-21 as common female parent. Pure hybrids were selected on the basis of male dominant traits to raise true F2 generations. Segregation patterns of 3 : 1 in all F2 generations and χ2 estimates indicated that photoperiod insensitive flowering, determinate growth habit and white flower colour are monogenic recessive in nature, while photoperiod sensitivity, indeterminate growth habit and purple flowers are dominant in nature. Linkage analysis in the cross GNIB-21 x GP-189 revealed that loci governing photoperiod responsive flowering and growth habit are placed at the distance of 22.99 cM + 0.022. The analysis also revealed coupling phase of linkage between photoperiod insensitive flowering and determinate growth habit. The information obtained from present study will be helpful for molecular dissection of photoperiod responsive flowering and growth habit in Indian bean utilizing new genomics tools
- 9 February 2026
- Published by EJPB, ISPB, CPBG - Tamil Nadu Agricultural University in Electronic Journal of Plant Breeding
- Vol. 10 (01) , 297-302
Open AccessInheritance pattern of photoperiod responsive flowering, growth habit and flower colour in Indian bean [Lablab purpureus (L.) Sweet.]
Photoperiod responsive flowering and growth habit have played key role in evolution and domestication of Indian bean. Most of the land races of this crop exhibit photoperiod sensitive flowering and indeterminate growth habit. To deduce inheritance pattern of photoperiod responsive flowering, growth habit and flower colour, four crosses were made between genotypes having extreme phenotypes keeping determinate and photoperiod insensitive variety GNIB-21 as common female parent. Pure hybrids were selected on the basis of male dominant traits to raise true F2 generations. Segregation patterns of 3 : 1 in all F2 generations and χ2 estimates indicated that photoperiod insensitive flowering, determinate growth habit and white flower colour are monogenic recessive in nature, while photoperiod sensitivity, indeterminate growth habit and purple flowers are dominant in nature. Linkage analysis in the cross GNIB-21 x GP-189 revealed that loci governing photoperiod responsive flowering and growth habit are placed at the distance of 22.99 cM + 0.022. The analysis also revealed coupling phase of linkage between photoperiod insensitive flowering and determinate growth habit. The information obtained from present study will be helpful for molecular dissection of photoperiod responsive flowering and growth habit in Indian bean utilizing new genomics tools
- Open Access
- 14 October 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Multivariate analysis of genetic variability and divergence in upland cotton (Gossypium hirsutum L.) for yield and fiber quality traits
Cotton (Gossypium hirsutum L.) is a versatile crop with multiple applications. The evaluation of 30 upland cotton genotypes was conducted to measure variability and divergence in seed cotton yield, yield-related attributes and fiber quality traits using multivariate analyses. The investigation, conducted during the Kharif season of 2022, was laid out in a randomized block design (RBD) with three replications at the Main Cotton Research Station (MCRS), Navsari Agricultural University (NAU), Surat. Analysis of variance (ANOVA) showed significant genetic variability between the genotypes for all traits. Morphological observations identified GISV-400 as the genotype with the highest seed cotton yield (148.00 g/plant). Fiber quality analysis highlighted GISV-391 as superior in upper half mean length (28.03 mm), fiber strength (28.37 g/tex) and fiber fineness (4.80 µg/inch). Seed cotton yield per plant displayed a significant positive relationship with the number of bolls per plant and boll weight. Principal component analysis (PCA) identified five components with eigenvalues greater than one, collectively explaining 78.66 % of the total variation. The biplot revealed GISV-399, GISV-398, GISV-391, GISV-322, GISV-323, GISV-313 and GISV-402 as the most genetically diverse genotypes. Hierarchical clustering further classified the 30 genotypes into five distinct groups. To identify the best-performing genotypes, the Multi-Trait Genotype-Ideotype Distance Index (MGIDI) was employed for the ranking of genotypes at 10 % selection intensity, four genotypes (GISV-389, GISV-395, GISV-394 and GISV-391) were identified as superior. Overall, seven genotypes (GISV-389, GISV-395, GISV-394, GISV-391, GISV-398, GISV-399 and GISV-400) were consistently identified as high-performing in terms of both yield and fiber quality based on PCA, hierarchical clustering and MGIDI. Overall, the study indicated that the existing variability in tetraploid cotton can be effectively utilized through hybridization and development of mapping populations.
- 14 October 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Open AccessMultivariate analysis of genetic variability and divergence in upland cotton (Gossypium hirsutum L.) for yield and fiber quality traits
Cotton (Gossypium hirsutum L.) is a versatile crop with multiple applications. The evaluation of 30 upland cotton genotypes was conducted to measure variability and divergence in seed cotton yield, yield-related attributes and fiber quality traits using multivariate analyses. The investigation, conducted during the Kharif season of 2022, was laid out in a randomized block design (RBD) with three replications at the Main Cotton Research Station (MCRS), Navsari Agricultural University (NAU), Surat. Analysis of variance (ANOVA) showed significant genetic variability between the genotypes for all traits. Morphological observations identified GISV-400 as the genotype with the highest seed cotton yield (148.00 g/plant). Fiber quality analysis highlighted GISV-391 as superior in upper half mean length (28.03 mm), fiber strength (28.37 g/tex) and fiber fineness (4.80 µg/inch). Seed cotton yield per plant displayed a significant positive relationship with the number of bolls per plant and boll weight. Principal component analysis (PCA) identified five components with eigenvalues greater than one, collectively explaining 78.66 % of the total variation. The biplot revealed GISV-399, GISV-398, GISV-391, GISV-322, GISV-323, GISV-313 and GISV-402 as the most genetically diverse genotypes. Hierarchical clustering further classified the 30 genotypes into five distinct groups. To identify the best-performing genotypes, the Multi-Trait Genotype-Ideotype Distance Index (MGIDI) was employed for the ranking of genotypes at 10 % selection intensity, four genotypes (GISV-389, GISV-395, GISV-394 and GISV-391) were identified as superior. Overall, seven genotypes (GISV-389, GISV-395, GISV-394, GISV-391, GISV-398, GISV-399 and GISV-400) were consistently identified as high-performing in terms of both yield and fiber quality based on PCA, hierarchical clustering and MGIDI. Overall, the study indicated that the existing variability in tetraploid cotton can be effectively utilized through hybridization and development of mapping populations.
- Open Access
- 22 September 2025
- Published by Agricultural Research Communication Center in Legume Research - An International Journal
- No. Of
Parametric and Non-parametric Statistical Approaches for Estimation of Genotype × Environment Interaction of Pigeon Pea [Cajanus cajan (L.) Millspaugh] Genotypes
Background: The genotype-by-site interaction might be stronger than the genotype-by-year interaction, making it difficult to identify superior genotypes in multi-location trials. This is influenced by the Genotype × Environment interaction (GEI). The estimation of G, E and G × Einteractions (or GEI) ensures valid recommendations of suitable varieties able to overcomethe pressure due to variable occurring conditions. The determination of GEI factors helps geneticists in their breeding programs to shift the selection toward varieties suited for wide environments or specific to certain niches. Methods: This requires genotype evaluation in multi-environment trials in the latter stages of selection. To evaluate genotype-environment interaction (GEI), fourteen pigeon pea genotypes were studied in four Gujarat sites. The additive main effects and multiplicative interaction (AMMI) analysis of variance (ANOVA) showed that genotype-environment interaction (GEI), IPCA 1 and IPCA 2 were significant across all genotypes. Result: Pigeon pea genotype NPMK-15-05 (G9) yielded best. AMMI 1 and 2 plots showed stable ICPL-87119 (G12) and BP-12-31 (G5) genotypes. The genotypes with the strongest non-parametric stability were NPMK-15-05 (G9), ICPL-87119 (G12), and NPMK-15-03 (G8). GGE (Which-win-where) biplot analysis showed that NPMK-15-05 (G9) won.
- 22 September 2025
- Published by Agricultural Research Communication Center in Legume Research - An International Journal
- No. Of
Open AccessParametric and Non-parametric Statistical Approaches for Estimation of Genotype × Environment Interaction of Pigeon Pea [Cajanus cajan (L.) Millspaugh] Genotypes
Background: The genotype-by-site interaction might be stronger than the genotype-by-year interaction, making it difficult to identify superior genotypes in multi-location trials. This is influenced by the Genotype × Environment interaction (GEI). The estimation of G, E and G × Einteractions (or GEI) ensures valid recommendations of suitable varieties able to overcomethe pressure due to variable occurring conditions. The determination of GEI factors helps geneticists in their breeding programs to shift the selection toward varieties suited for wide environments or specific to certain niches. Methods: This requires genotype evaluation in multi-environment trials in the latter stages of selection. To evaluate genotype-environment interaction (GEI), fourteen pigeon pea genotypes were studied in four Gujarat sites. The additive main effects and multiplicative interaction (AMMI) analysis of variance (ANOVA) showed that genotype-environment interaction (GEI), IPCA 1 and IPCA 2 were significant across all genotypes. Result: Pigeon pea genotype NPMK-15-05 (G9) yielded best. AMMI 1 and 2 plots showed stable ICPL-87119 (G12) and BP-12-31 (G5) genotypes. The genotypes with the strongest non-parametric stability were NPMK-15-05 (G9), ICPL-87119 (G12), and NPMK-15-03 (G8). GGE (Which-win-where) biplot analysis showed that NPMK-15-05 (G9) won.
- Open Access
- 7 July 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Validation of SSR markers linked to heat tolerance in bread wheat genotypes
Parental selection and breeding rely on the existence of genetic diversity and relationships present in germplasms. The objective of this study was to assess the molecular divergence for terminal heat stress tolerance in twenty wheat genotypes, utilizing 25 SSR markers associated with heat tolerance, which are linked to the trait of interest across various chromosomes. For molecular diversity assessment, fourteen polymorphic SSR markers, out of the twenty-five, amplified a total of 33 alleles, which were distributed across nine chromosomes. The number of alleles per locus ranged from 2 to 3, with an average of 2.36 alleles per locus. Polymorphism information content (PIC), resolving power (Rp), effective multiplex ratio (EMR) and marker index (MI) values were high for markers viz., Xwmc603, Xwmc161 and Xgwm577, indicating that they had the most discriminatory power. Based on Jaccard's similarity coefficient, the genetic similarity among the 20 wheat genotypes ranged from 0.36 to 0.88. The dendrogram generated from UPGMA cluster analysis revealed two primary clusters: cluster I, which comprised three genotypes and cluster II, which included seventeen genotypes. Genotypes GS/2019- 20/6046, HPYT-2019-20/416 and GS/2019 20/5042 fall in cluster I and the remaining seventeen genotypes are included in cluster II, with similarity coefficient values ranging from 0.70 to 0.79 and 0.36 to 0.88, respectively. The current study demonstrated that there is enoughvariation present among the genotypes at the molecular level and the findings would help to make use of diverse genotypes as parents in future hybridizing programs to improve terminal heat tolerance.
- 7 July 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Open AccessValidation of SSR markers linked to heat tolerance in bread wheat genotypes
Parental selection and breeding rely on the existence of genetic diversity and relationships present in germplasms. The objective of this study was to assess the molecular divergence for terminal heat stress tolerance in twenty wheat genotypes, utilizing 25 SSR markers associated with heat tolerance, which are linked to the trait of interest across various chromosomes. For molecular diversity assessment, fourteen polymorphic SSR markers, out of the twenty-five, amplified a total of 33 alleles, which were distributed across nine chromosomes. The number of alleles per locus ranged from 2 to 3, with an average of 2.36 alleles per locus. Polymorphism information content (PIC), resolving power (Rp), effective multiplex ratio (EMR) and marker index (MI) values were high for markers viz., Xwmc603, Xwmc161 and Xgwm577, indicating that they had the most discriminatory power. Based on Jaccard's similarity coefficient, the genetic similarity among the 20 wheat genotypes ranged from 0.36 to 0.88. The dendrogram generated from UPGMA cluster analysis revealed two primary clusters: cluster I, which comprised three genotypes and cluster II, which included seventeen genotypes. Genotypes GS/2019- 20/6046, HPYT-2019-20/416 and GS/2019 20/5042 fall in cluster I and the remaining seventeen genotypes are included in cluster II, with similarity coefficient values ranging from 0.70 to 0.79 and 0.36 to 0.88, respectively. The current study demonstrated that there is enoughvariation present among the genotypes at the molecular level and the findings would help to make use of diverse genotypes as parents in future hybridizing programs to improve terminal heat tolerance.
- Open Access
- 11 June 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Molecular characterization and phenotypic selection for blast resistance and yield enhancement in rice (Oryza sativa L.)
Gurjari, a widely cultivated high-yielding potential variety popular among the farmers of Gujarat, is highly susceptible to the blast disease. To improve its blast resistance, GNR-9 and Tetep, which carry major broad-spectrum resistance genes, were used as donors in a marker-assisted breeding program, combined with phenotypic selection for key agro-morphological traits. Foreground selection in F3 generation confirmed the presence of blast resistance genes Pikh/Pi54, Pitp(t) and Pita-2/Pi67 in 36 of 178 breeding lines. These 36 lines, along with 4 checks, were further evaluated in a Randomized Block Design (RBD) during Kharif 2022 for variability, correlation, Principal Component Analysis (PCA) and Multi-Trait Genotype-Ideotype Distance Index (MGIDI) for selecting the best lines and molecular screening of blast resistance. Analysis of variance revealed significant variation for all 13 traits, with moderate GCV for plant height, productive tillers, 100-grain weight, grain yield, straw yield and harvest index. Grain yield showed positive correlations with panicle length, grains per panicle, 100-grain weight, straw yield and harvest index. PCA explained 82.13 % of total variation across traits, while MGIDI identified four high-performing lines; 22KSMF4-8, 22KSMF4-5, 22KSMF4-6 and 22KSMF4-14. Molecular screening of F₄ progenies identified nine F₄ derivatives carrying three blast resistance genes, with two (Gurjari × GNR-9) exhibiting superior grain yield and quality over Gurjari, making them promising candidates for developing high-yielding, blast-resistant varieties.
- 11 June 2025
- Published by Horizon E-Publishing Group in Plant Science Today
Open AccessMolecular characterization and phenotypic selection for blast resistance and yield enhancement in rice (Oryza sativa L.)
Gurjari, a widely cultivated high-yielding potential variety popular among the farmers of Gujarat, is highly susceptible to the blast disease. To improve its blast resistance, GNR-9 and Tetep, which carry major broad-spectrum resistance genes, were used as donors in a marker-assisted breeding program, combined with phenotypic selection for key agro-morphological traits. Foreground selection in F3 generation confirmed the presence of blast resistance genes Pikh/Pi54, Pitp(t) and Pita-2/Pi67 in 36 of 178 breeding lines. These 36 lines, along with 4 checks, were further evaluated in a Randomized Block Design (RBD) during Kharif 2022 for variability, correlation, Principal Component Analysis (PCA) and Multi-Trait Genotype-Ideotype Distance Index (MGIDI) for selecting the best lines and molecular screening of blast resistance. Analysis of variance revealed significant variation for all 13 traits, with moderate GCV for plant height, productive tillers, 100-grain weight, grain yield, straw yield and harvest index. Grain yield showed positive correlations with panicle length, grains per panicle, 100-grain weight, straw yield and harvest index. PCA explained 82.13 % of total variation across traits, while MGIDI identified four high-performing lines; 22KSMF4-8, 22KSMF4-5, 22KSMF4-6 and 22KSMF4-14. Molecular screening of F₄ progenies identified nine F₄ derivatives carrying three blast resistance genes, with two (Gurjari × GNR-9) exhibiting superior grain yield and quality over Gurjari, making them promising candidates for developing high-yielding, blast-resistant varieties.
- 20 February 2025
- Published by Springer Nature in Molecular Biology Reports
- Vol. 52 (1) , 1-12
Identification and characterization of Flowering Locus D in Indian bean [Lablab purpureus (L.) Sweet]
Background The transition from vegetative to floral development is a critical process regulated by a variety of complex internal and external factors. This study aims to characterize the Flowering Locus D (FLD) gene in relation to the floral induction pathway and examine its expression profiles under different photoperiodic conditions in Indian bean (Lablab purpureus (L.) Sweet). Methods The LprFLD gene was PCR-amplified and sequenced using gene-specific primers for both photosensitive (GNIB-22, GP-189) and photoinsensitive (GNIB-21) varieties of Indian bean. Exon prediction, phylogenetic analysis, and in silico domain prediction were performed, followed by gene expression analysis using qRT-PCR for contrasting phenotypes. Results The complete LprFLD gene sequence was characterized, containing five exons and showing significant similarity to GmFLD and VuFLD. Phylogenetic analysis of FLD homologs from 27 taxa revealed the closest evolutionary relationships among members of the Phaseoleae tribe, including Lablab purpureus, Vignaumbellata, Vigna angularis, Vignaradiata, Vigna unguiculata, Phaseolus vulgaris, Glycine max, Glycinesoja, and Cajanus cajan. In silico domain prediction identified two conserved domains, SWIRM and amino oxidase, in the FLD homologs of Indian bean, soybean, cowpea, Arabidopsis and rice. Gene expression analysis showed that the relative expression of LprFLD in trifoliate leaves corresponded with flowering in both photosensitive and photoinsensitive genotypes under long-day conditions. Overall, the expression level of LprFLD was lower in trifoliate leaves and shoot tips. Conclusion This is the first report on the characterization of the LprFLD locus in Indian bean. Phylogenetic analysis confirmed its close evolutionary relationship with other Phaseoleae species. qRT-PCR results suggest that the elevated expression of LprFLD in trifoliate leaves coincides with flowering time in both photosensitive and photoinsensitive genotypes under long-day conditions, indicating that other loci may also regulate floral transition under varying photoperiods in Indian bean.
- 20 February 2025
- Published by Springer Nature in Molecular Biology Reports
- Vol. 52 (1) , 1-12
Identification and characterization of Flowering Locus D in Indian bean [Lablab purpureus (L.) Sweet]
Background The transition from vegetative to floral development is a critical process regulated by a variety of complex internal and external factors. This study aims to characterize the Flowering Locus D (FLD) gene in relation to the floral induction pathway and examine its expression profiles under different photoperiodic conditions in Indian bean (Lablab purpureus (L.) Sweet). Methods The LprFLD gene was PCR-amplified and sequenced using gene-specific primers for both photosensitive (GNIB-22, GP-189) and photoinsensitive (GNIB-21) varieties of Indian bean. Exon prediction, phylogenetic analysis, and in silico domain prediction were performed, followed by gene expression analysis using qRT-PCR for contrasting phenotypes. Results The complete LprFLD gene sequence was characterized, containing five exons and showing significant similarity to GmFLD and VuFLD. Phylogenetic analysis of FLD homologs from 27 taxa revealed the closest evolutionary relationships among members of the Phaseoleae tribe, including Lablab purpureus, Vignaumbellata, Vigna angularis, Vignaradiata, Vigna unguiculata, Phaseolus vulgaris, Glycine max, Glycinesoja, and Cajanus cajan. In silico domain prediction identified two conserved domains, SWIRM and amino oxidase, in the FLD homologs of Indian bean, soybean, cowpea, Arabidopsis and rice. Gene expression analysis showed that the relative expression of LprFLD in trifoliate leaves corresponded with flowering in both photosensitive and photoinsensitive genotypes under long-day conditions. Overall, the expression level of LprFLD was lower in trifoliate leaves and shoot tips. Conclusion This is the first report on the characterization of the LprFLD locus in Indian bean. Phylogenetic analysis confirmed its close evolutionary relationship with other Phaseoleae species. qRT-PCR results suggest that the elevated expression of LprFLD in trifoliate leaves coincides with flowering time in both photosensitive and photoinsensitive genotypes under long-day conditions, indicating that other loci may also regulate floral transition under varying photoperiods in Indian bean.
- Open Access
Characterization of CcTFL1 Governing Plant Architecture in Pigeon pea (Cajanus cajan (L.) Millsp.)
Growth habits are among the essential adaptive traits acted upon by evolution during plant speciation. They have brought remarkable changes in the morphology and physiology of plants. Inflorescence architecture varies greatly between wild relatives and cultivars of pigeon pea. The present study isolated the CcTFL1 (Terminal Flowering Locus 1) locus using six varieties showing determinate (DT) and indeterminate (IDT) growth habits. Multiple alignments of CcTFL1 sequences revealed the presence of InDel, which describes a 10 bp deletion in DT varieties. At the same time, IDT varieties showed no deletion. InDel altered the translation start point in DT varieties, resulting in the shortening of exon 1. This InDel was validated in ten varieties of cultivated species and three wild relatives differing in growth habits. The predicted protein structure showed the absence of 27 amino acids in DT varieties, which was reflected in mutant CcTFL1 by the absence of two α-helices, a connecting loop, and shortened β-sheet. By subsequent motif analysis, it was found that the wild-type protein had a phosphorylation site for protein kinase C, but the mutant protein did not. In silico analysis revealed that the InDel-driven deletion of amino acids spans, containing a phosphorylation site for kinase protein, may have resulted in the non-functionality of the CcTFL1 protein, rendering the determinate growth habit. This characterization of the CcTFL1 locus could be used to modulate growth habits through genome editing.
Open AccessCharacterization of CcTFL1 Governing Plant Architecture in Pigeon pea (Cajanus cajan (L.) Millsp.)
Growth habits are among the essential adaptive traits acted upon by evolution during plant speciation. They have brought remarkable changes in the morphology and physiology of plants. Inflorescence architecture varies greatly between wild relatives and cultivars of pigeon pea. The present study isolated the CcTFL1 (Terminal Flowering Locus 1) locus using six varieties showing determinate (DT) and indeterminate (IDT) growth habits. Multiple alignments of CcTFL1 sequences revealed the presence of InDel, which describes a 10 bp deletion in DT varieties. At the same time, IDT varieties showed no deletion. InDel altered the translation start point in DT varieties, resulting in the shortening of exon 1. This InDel was validated in ten varieties of cultivated species and three wild relatives differing in growth habits. The predicted protein structure showed the absence of 27 amino acids in DT varieties, which was reflected in mutant CcTFL1 by the absence of two α-helices, a connecting loop, and shortened β-sheet. By subsequent motif analysis, it was found that the wild-type protein had a phosphorylation site for protein kinase C, but the mutant protein did not. In silico analysis revealed that the InDel-driven deletion of amino acids spans, containing a phosphorylation site for kinase protein, may have resulted in the non-functionality of the CcTFL1 protein, rendering the determinate growth habit. This characterization of the CcTFL1 locus could be used to modulate growth habits through genome editing.
- Open Access
- 13 January 2022
- Published by Elsevier in Journal of Genetic Engineering and Biotechnology
- Vol. 20 (1) , 1-11
Phylogenetic analysis of phytochrome A gene from Lablab purpureus (L.) Sweet
- 13 January 2022
- Published by Elsevier in Journal of Genetic Engineering and Biotechnology
- Vol. 20 (1) , 1-11
Open AccessPhylogenetic analysis of phytochrome A gene from Lablab purpureus (L.) Sweet
- Open Access
- 22 February 2021
- Published by Elsevier in Journal of Genetic Engineering and Biotechnology
- Vol. 19 (1) , 34-12
Allelic characterization and protein structure analysis reveals the involvement of splice site mutation for growth habit differences in Lablab purpureus (L.) Sweet
- 22 February 2021
- Published by Elsevier in Journal of Genetic Engineering and Biotechnology
- Vol. 19 (1) , 34-12
Open AccessAllelic characterization and protein structure analysis reveals the involvement of splice site mutation for growth habit differences in Lablab purpureus (L.) Sweet