NBNanqi Bao

Nanqi Bao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nanqi Bao has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Alkoxybiphenyl isothiocyanate liquid crystals: synthesis, mesomorphic properties and surface interactions

    by Mohammad S. Rahman, Kiran Agrahari, Nanqi Bao, Trenton J. Wolter, Nicholas L. Abbott, Manos Mavrikakis, Robert J. Twieg

  • Design of Chemoresponsive Liquid Crystals Using Metal-Coordinating Polymer Surfaces

    by Nanqi Bao, Tibor Szilvási, Ayushi Tripathi, Trevor Franklin, Trenton J. Wolter, Haonian Shu, Robert J. Twieg, Rong Yang, Manos Mavrikakis, Nicholas L. Abbott

    Liquid crystals (LCs), when interfaced with chemically functionalized surfaces, can amplify a range of chemical and physical transformations into optical outputs. While metal cation-binding sites on surfaces have been shown to provide a basis for the design of chemoresponsive LCs, the cations have been found to dissociate from the surfaces and dissolve slowly into LCs, resulting in time-dependent changes in the properties of LC-solid interfaces (which impacts the reliability of devices incorporating such surfaces). Here, we explore the use of surfaces comprising metal-coordinating polymers to minimize the dissolution of metal cations into LCs and characterize the impact of the interfacial environment created by the coordinating polymer on the ordering and time-dependent properties of LCs. In particular, by combining theoretical (electronic structure calculations) and experimental (polarization-modulation infrared reflection-adsorption spectroscopy) results, we determine that the pyridine groups of a thin film of poly(4-vinylpyridine-co-divinylbenzene) (P(4VP-co-DVB)) coordinate with Ni2+ when Ni(ClO4)2 is deposited onto the film. We provide evidence that the Ni2+-pyridine coordination weakens the binding of Ni2+ with 4'-n-pentyl-4-biphenylcarbonitrile (5CB), a room-temperature nematic LC, as compared to Ni(ClO4)2 supported on glass, although binding is still sufficiently strong to induce a homeotropic (perpendicular) orientation of the LC. Exposure of the 5CB films supported on Ni(ClO4)2-decorated P(4VP-co-DVB) substrates to parts-per-million vapor concentrations of dimethylmethylphosphonate (DMMP) was found to trigger orientational transitions (to planar (parallel) orientations) in the LC films. In contrast, 5CB supported on Ni(ClO4)2-decorated glass surfaces exhibited no response, even though displacement of 5CB by DMMP is predicted by computations to be thermodynamically favored in both cases. We propose that the distinct LC responses measured on glass and the coordinating polymer substrates are governed by the kinetics of displacement of 5CB by DMMP, a proposal that is supported by measurements performed with increasing temperature. Importantly, by using Ni2+ supported on P(4VP-co-DVB), we measured the ordering of 5CB to be stable and long-lived (>7 days), in contrast to unstable LC ordering (2+ supported on glass under dry conditions and at room temperature. We further demonstrate the stability of Ni(ClO4)2 supported on P(4VP-co-DVB) toward higher temperatures and humidity using E7 as the LC. Overall, these results demonstrate that metal-coordinating polymer films are a promising class of substrates for fabricating robust and long-lived chemoresponsive LCs.


  • Elucidating Molecular-Scale Principles Governing the Anchoring of Liquid Crystal Mixtures on Solid Surfaces

    by Jake I. Gold, Jonathan K. Sheavly, Nanqi Bao, Huaizhe Yu, Juriti Rajbangshi, James J. Schauer, Victor M. Zavala, Nicholas L. Abbott, Reid C. Van Lehn, Manos Mavrikakis

    Computational chemistry calculations are broadly useful for guiding the atom-scale design of hard-soft material interfaces including how molecular interactions of single-component liquid crystals (LCs) at inorganic surfaces lead to preferred orientations of the LC far from the surface. The majority of LCs, however, are not single-component phases but comprise of mixtures, such as a mixture of mesogens, added to provide additional functions such as responsiveness to the presence of targeted organic compounds (for chemical sensing). In such LC mixtures, little is understood about the near-surface composition and organization of molecules and how that organization propagates into the far-field LC orientation. Here, we address this broad question by using a multiscale computational approach that combines density functional theory (DFT)-based calculations and classical molecular dynamics (MD) simulations to predict the interfacial composition and organization of a binary LC mixture of 4'-cyano-4-biphenylcarbolxylic acid (CBCA) and 4'-n-pentyl-4-biphenylcarbonitrile (5CB) supported on anatase (101) titania surfaces. DFT calculations determine the surface composition and atomic-scale organization of CBCA and 5CB at the titania surface, and classical MD simulations build upon the DFT description to describe the evolution of the near-surface order into the bulk LC. A surprising finding is that the 5CB and CBCA molecules adopt orthogonal orientations at the anatase surface and that, above a threshold concentration of CBCA, this mixture of orientations evolves away from the surface to define a uniform far-field homeotropic orientation. These results demonstrate that molecular-level knowledge achieved through a combination of computational techniques permits the design and understanding of functional LC mixtures at interfaces.


  • Scalable Extraction of Information from Spatiotemporal Patterns of Chemoresponsive Liquid Crystals Using Topological Descriptors

    by Shengli Jiang, Nanqi Bao, Alexander D. Smith, Shraddha Byndoor, Reid C. Van Lehn, Manos Mavrikakis, Nicholas L. Abbott, Victor M. Zavala


  • Open Access

    Gas-phase microactuation using kinetically controlled surface states of ultrathin catalytic sheets

    by Nanqi Bao, Qingkun Liu, Michael F. Reynolds, Marc Figueras, Evangelos Smith, Wei Wang, Michael C. Cao, David A. Muller, Manos Mavrikakis, Itai Cohen, et al.

    Biological systems convert chemical energy into mechanical work by using protein catalysts that assume kinetically controlled conformational states. Synthetic chemomechanical systems using chemical catalysis have been reported, but they are slow, require high temperatures to operate, or indirectly perform work by harnessing reaction products in liquids (e.g., heat or protons). Here, we introduce a bioinspired chemical strategy for gas-phase chemomechanical transduction that sequences the elementary steps of catalytic reactions on ultrathin (total = 1 atm). When fueled by hydrogen gas and either oxygen or ozone gas, we show how kinetically controlled surface states of the catalyst can be exploited to achieve fast actuation (600 ms/cycle) at 20 °C. We also show that the approach can integrate photochemically controlled reactions and can be used to drive the reconfiguration of microhinges and complex origami- and kirigami-based microstructures.


  • Open Access

    Scalable Extraction of Information from Spatio-Temporal Patterns of Chemoresponsive Liquid Crystals Using Topological Data Analysis

    by Shengli Jiang, Nanqi Bao, Alexander D. Smith, Shraddha Byndoor, Reid C. Van Lehn, Manos Mavrikakis, Nicholas L. Abbott, Victor M. Zavala

    Chemoresponsive liquid crystals (LCs) can be engineered to generate information-rich optical responses upon exposure to gas contaminants. We investigate the use of topological descriptors to extract information from these complex responses and with this facilitate sensor design and understand physical phenomena that govern responses. We provide a holistic view of topological descriptors using Minkowski functionals and fractal analysis and show how descriptors can be used for unsupervised (clustering, visualization) and supervised (regression, classification) machine learning (ML) tasks. Specifically, by using high-throughput, experimental data for LC films exposed to diverse contaminants, we show that topological descriptors can be used to effectively detect outliers and predict contaminant concentrations using simple ML models. Notably, these models achieve comparable accuracies to those of powerful convolutional neural networks, but with much lower computational times (from hours to seconds) and using less sophisticated computing hardware. This scalability enables high-resolution, space-time data analysis.

  • Ordering Transitions of Liquid Crystals Triggered by Metal Oxide-catalyzed Reactions of Sulfur Oxide Species

    by Nanqi Bao, Jake I. Gold, Jonathan K. Sheavly, James J. Schauer, Victor M. Zavala, Reid C. Van Lehn, Manos Mavrikakis, Nicholas L. Abbott

    Liquid crystals (LCs), when supported on reactive surfaces, undergo changes in ordering that can propagate over distances of micrometers, thus providing a general and facile mechanism to amplify atomic-scale transformations on surfaces into the optical scale. While reactions on organic and metal substrates have been coupled to LC-ordering transitions, metal oxide substrates, which offer unique catalytic activities for reactions involving atmospherically important chemical species such as oxidized sulfur species, have not been explored. Here, we investigate this opportunity by designing LCs that contain 4'-cyanobiphenyl-4-carboxylic acid (CBCA) and respond to surface reactions triggered by parts-per-billion concentrations of SO2 gas on anatase (101) substrates. We used electronic structure calculations to predict that the carboxylic acid group of CBCA binds strongly to anatase (101) in a perpendicular orientation, a prediction that we validated in experiments in which CBCA (0.005 mol %) was doped into an LC (4'-n-pentyl-4-biphenylcarbonitrile). Both experiment and computational modeling further demonstrated that SO3-like species, produced by a surface-catalyzed reaction of SO2 with H2O on anatase (101), displace CBCA from the anatase surface, resulting in an orientational transition of the LC. Experiments also reveal the LC response to be highly selective to SO2 over other atmospheric chemical species (including H2O, NH3, H2S, and NO2), in agreement with our computational predictions for anatase (101) surfaces. Overall, we establish that the catalytic activities of metal oxide surfaces offer the basis of a new class of substrates that trigger LCs to undergo ordering transitions in response to chemical species of relevance to atmospheric chemistry.


  • Sensing Gas Mixtures by Analyzing the Spatiotemporal Optical Responses of Liquid Crystals Using 3D Convolutional Neural Networks

    by Nanqi Bao, Shengli Jiang, Alexander Smith, James J. Schauer, Manos Mavrikakis, Reid C. Van Lehn, Victor M. Zavala, Nicholas L. Abbott

    We report how analysis of the spatial and temporal optical responses of liquid crystal (LC) films to targeted gases, when performed using a machine learning methodology, can advance the sensing of gas mixtures and provide important insights into the physical processes that underlie the sensor response. We develop the methodology using O3 and Cl2 mixtures (representative of an important class of analytes) and LCs supported on metal perchlorate-decorated surfaces as a model system. Although O3 and Cl2 both diffuse through LC films and undergo redox reactions with the supporting metal perchlorate surfaces to generate similar initial and final optical states of the LCs, we show that a three-dimensional convolutional neural network can extract feature information that is encoded in the spatiotemporal color patterns of the LCs to detect the presence of both O3 and Cl2 species in mixtures and to quantify their concentrations. Our analysis reveals that O3 detection is driven by the transition time over which the brightness of the LC changes, while Cl2 detection is driven by color fluctuations that develop late in the optical response of the LC. We also show that we can detect the presence of Cl2 even when the concentration of O3 is orders of magnitude greater than the Cl2 concentration. The proposed methodology is generalizable to a wide range of analytes, reactive surfaces, and LCs and has the potential to advance the design of portable LC monitoring devices (e.g., wearable devices) for analyzing gas mixtures using spatiotemporal color fluctuations.


  • Designing chemically selective liquid crystalline materials that respond to oxidizing gases

    by Nanqi Bao, Jake I. Gold, Tibor Szilvási, Huaizhe Yu, Robert J. Twieg, Manos Mavrikakis, Nicholas L. Abbott

    Chemically selective liquid crystalline materials that can distinguish O 3 and Cl 2 at parts per billion concentrations were designed by combining electronic structure calculations and experiments.


  • Open Access

    Design of Chemoresponsive Soft Matter Using Hydrogen-Bonded Liquid Crystals

    by Huaizhe Yu, Kunlun Wang, Tibor Szilvási, Karthik Nayani, Nanqi Bao, Robert J. Twieg, Manos Mavrikakis, Nicholas L. Abbott

    Soft matter that undergoes programmed macroscopic responses to molecular analytes has potential utility in a range of health and safety-related contexts. In this study, we report the design of a nematic liquid crystal (LC) composition that forms through dimerization of carboxylic acids and responds to the presence of vapors of organoamines by undergoing a visually distinct phase transition to an isotropic phase. Specifically, we screened mixtures of two carboxylic acids, 4-butylbenzoic acid and trans-4-pentylcyclohexanecarboxylic acid, and found select compositions that exhibited a nematic phase from 30.6 to 111.7 °C during heating and 110.6 to 3.1 °C during cooling. The metastable nematic phase formed at ambient temperatures was found to be long-lived (>5 days), thus enabling the use of the LC as a chemoresponsive optical material. By comparing experimental infrared (IR) spectra of the LC phase with vibrational frequencies calculated using density functional theory (DFT), we show that it is possible to distinguish between the presence of monomers, homodimers and heterodimers in the mixture, leading us to conclude that a one-to-one heterodimer is the dominant species within this LC composition. Further support for this conclusion is obtained by using differential scanning calorimetry. Exposure of the LC to 12 ppm triethylamine (TEA) triggers a phase transition to an isotropic phase, which we show by IR spectroscopy to be driven by an acid-base reaction, leading to the formation of ammonium carboxylate salts. We characterized the dynamics of the phase transition and found that it proceeds via a characteristic spatiotemporal pathway involving the nucleation, growth, and coalescence of isotropic domains, thus amplifying the atomic-scale acid-base reaction into an information-rich optical output. In contrast to TEA, we determined via both experiment and computation that neither hydrogen bonding donor or acceptor molecules, such as water, dimethyl methylphosphonate, ethylene oxide or formaldehyde, disrupt the heterodimers formed in the LC, hinting that the phase transition (including spatial-temporal characteristics of the pathway) induced in this class of hydrogen bonded LC may offer the basis of a facile and chemically selective way of reporting the presence of volatile amines. This proposal is supported by exploratory experiments in which we show that it is possible to trigger a phase transition in the LC by exposure to volatile amines emitted from rotting fish. Overall, these results provide new principles for the design of chemoresponsive soft matter based on hydrogen bonded LCs that may find use as the basis of low-cost visual indicators of chemical environments.