Federico Brandani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Federico Brandani has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Eugenio Meloni
Department of Industrial Engineering, University of Salerno, via Giovanni Paolo II 132, 84084 Fisciano, SA, Italy
3 shared publications - Marco Martino
Hydrogen and New Vectors Laboratory (TERIN-DEC-H2V), Energy Technology and Renewable Sources Department, ENEA Portici Research Center, Piazzale Enrico Fermi, 1, Località Granatello, 80055 Portici, Italy
3 shared publications - Pluton Pullumbi
Air Liquide, Paris Innovation Campus. 1, chemin de la Porte des Loges, 78350 Les Loges en Josas, France
3 shared publications - Vincenzo Palma
Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II 132, 84084 Fisciano, Italy
3 shared publications - Olga Muccioli
Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II 132, 84084 Fisciano, Italy
2 shared publications - Simona Renda
Catalysis and Reactor Engineering Group (CREG), Aragon Institute of Engineering Research (I3A), Universidad de Zaragoza, 50018 Zaragoza, Spain
2 shared publications
Latest Publications
- Open Access
- 22 July 2026
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 232, 829-844
Intrinsic kinetics of CO2 methanation over a nickel-based catalyst: Experimental insights and model optimization
- 22 July 2026
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 232, 829-844
Open AccessIntrinsic kinetics of CO2 methanation over a nickel-based catalyst: Experimental insights and model optimization
- Open Access
NiCoAl-Based Monolithic Catalysts for the N2O Intensified Decomposition: A New Path towards the Microwave-Assisted Catalysis
Nitrous oxide (N2O) is considered the primary source of NOx in the atmosphere, and among several abatement processes, catalytic decomposition is the most promising. The thermal energy necessary for this reaction is generally provided from the external side of the reactor by burning fossil fuels. In the present work, in order to overcome the limits related to greenhouse gas emissions, high heat transfer resistance, and energy losses, a microwave-assisted N2O decomposition was studied, taking advantages of the microwave’s (MW) properties of assuring direct and selective heating. To this end, two microwave-susceptible silicon carbide (SiC) monoliths were layered with different nickel–cobalt–aluminum mixed oxides. Based on the results of several characterization analyses (SEM/EDX, BET, ultrasound washcoat adherence tests, Hg penetration technique, and TPR), the sample showing the most suitable characteristics for this process was reproduced in the appropriate size to perform specific MW-assisted catalytic activity tests. The results demonstrated that, by coupling this catalytic system with an opportunely designed microwave heated reactor, it is possible to reach total N2O conversion and selectivity of a highly concentrated N2O stream (50 vol%) at T = 550 °C, the same required in the conventionally heated process to remove N2O from a less concentrated gas stream (20 vol%).
Open AccessNiCoAl-Based Monolithic Catalysts for the N2O Intensified Decomposition: A New Path towards the Microwave-Assisted Catalysis
Nitrous oxide (N2O) is considered the primary source of NOx in the atmosphere, and among several abatement processes, catalytic decomposition is the most promising. The thermal energy necessary for this reaction is generally provided from the external side of the reactor by burning fossil fuels. In the present work, in order to overcome the limits related to greenhouse gas emissions, high heat transfer resistance, and energy losses, a microwave-assisted N2O decomposition was studied, taking advantages of the microwave’s (MW) properties of assuring direct and selective heating. To this end, two microwave-susceptible silicon carbide (SiC) monoliths were layered with different nickel–cobalt–aluminum mixed oxides. Based on the results of several characterization analyses (SEM/EDX, BET, ultrasound washcoat adherence tests, Hg penetration technique, and TPR), the sample showing the most suitable characteristics for this process was reproduced in the appropriate size to perform specific MW-assisted catalytic activity tests. The results demonstrated that, by coupling this catalytic system with an opportunely designed microwave heated reactor, it is possible to reach total N2O conversion and selectivity of a highly concentrated N2O stream (50 vol%) at T = 550 °C, the same required in the conventionally heated process to remove N2O from a less concentrated gas stream (20 vol%).
- Open Access
Development of Innovative Structured Catalysts for the Catalytic Decomposition of N2O at Low Temperatures
Nitrous oxide (N2O), produced from several human activities, is considered a greenhouse gas with significant environmental impacts. The most promising abatement technology consists of the catalytic decomposition of N2O into nitrogen and oxygen. Many recently published papers dealing with N2O catalytic decomposition over Ni-substituted Co3O4 are related to the treatment of N2O concentrations less than 2 vol% in the feed stream. The present work is focused on developing catalysts active in the presence of a gaseous stream richer in N2O, up to 20 vol%, both as powder and in structured configurations suitable for industrial application. With this aim, different nickel-cobalt mixed oxides (NixCo1−xCo2O4) were prepared, characterized, and tested. Subsequently, since alumina-based slurries assure successful deposition of the catalytic species on the structured carrier, a screening was performed on three nickel-cobalt-alumina mixed oxides. As the latter samples turned out to be excellent catalysts for the N2O decomposition reaction, the final catalytic formulation was transferred to a silicon carbide monolith. The structured catalyst led to the following very promising results: total N2O conversion and selectivity towards N2 and O2 were reached at 510 °C by feeding 20 vol% of N2O. It represents an important achievement in the view of developing a more concretely applicable catalytic system for industrial processes.
Open AccessDevelopment of Innovative Structured Catalysts for the Catalytic Decomposition of N2O at Low Temperatures
Nitrous oxide (N2O), produced from several human activities, is considered a greenhouse gas with significant environmental impacts. The most promising abatement technology consists of the catalytic decomposition of N2O into nitrogen and oxygen. Many recently published papers dealing with N2O catalytic decomposition over Ni-substituted Co3O4 are related to the treatment of N2O concentrations less than 2 vol% in the feed stream. The present work is focused on developing catalysts active in the presence of a gaseous stream richer in N2O, up to 20 vol%, both as powder and in structured configurations suitable for industrial application. With this aim, different nickel-cobalt mixed oxides (NixCo1−xCo2O4) were prepared, characterized, and tested. Subsequently, since alumina-based slurries assure successful deposition of the catalytic species on the structured carrier, a screening was performed on three nickel-cobalt-alumina mixed oxides. As the latter samples turned out to be excellent catalysts for the N2O decomposition reaction, the final catalytic formulation was transferred to a silicon carbide monolith. The structured catalyst led to the following very promising results: total N2O conversion and selectivity towards N2 and O2 were reached at 510 °C by feeding 20 vol% of N2O. It represents an important achievement in the view of developing a more concretely applicable catalytic system for industrial processes.
- Open Access
MW-Assisted Regeneration of 13X Zeolites after N2O Adsorption from Concentrated Streams: A Process Intensification
N2O has a global warming potential about 300 times higher than CO2, and even if its contribution to the greenhouse effect is underrated, its abatement in industrial production’s tail gas has become imperative. In this work, we investigate the feasibility of the microwave (MW)-assisted regeneration of a 13X zeolite bed for N2O capture from tail gases. Several consecutive adsorption–desorption cycles were performed to verify the microwave heating effect on the zeolite’s adsorption properties. The results of the experimental tests, performed at N2O concentrations of 10, 20 and 40% vol, highlighted that (i) the steps are perfectly repeatable in terms of both adsorbed and desorbed amount of N2O, meaning that the MWs did not damage the zeolite’s structure, (ii) the presence of both H2O and O2 in the feed stream irreversibly reduces the adsorbent capacity due to nitrites and nitrates formation, and (iii) the presence of H2O alone with N2O still reduces the adsorbent capacity of the zeolites, which can be recovered through MW-assisted regeneration at 350 °C. Moreover, the MW-assisted TSA assured an energy and purge gas saving up to 63% and 82.5%, respectively, compared to a traditional regeneration process, resulting in effective process intensification.
Open AccessMW-Assisted Regeneration of 13X Zeolites after N2O Adsorption from Concentrated Streams: A Process Intensification
N2O has a global warming potential about 300 times higher than CO2, and even if its contribution to the greenhouse effect is underrated, its abatement in industrial production’s tail gas has become imperative. In this work, we investigate the feasibility of the microwave (MW)-assisted regeneration of a 13X zeolite bed for N2O capture from tail gases. Several consecutive adsorption–desorption cycles were performed to verify the microwave heating effect on the zeolite’s adsorption properties. The results of the experimental tests, performed at N2O concentrations of 10, 20 and 40% vol, highlighted that (i) the steps are perfectly repeatable in terms of both adsorbed and desorbed amount of N2O, meaning that the MWs did not damage the zeolite’s structure, (ii) the presence of both H2O and O2 in the feed stream irreversibly reduces the adsorbent capacity due to nitrites and nitrates formation, and (iii) the presence of H2O alone with N2O still reduces the adsorbent capacity of the zeolites, which can be recovered through MW-assisted regeneration at 350 °C. Moreover, the MW-assisted TSA assured an energy and purge gas saving up to 63% and 82.5%, respectively, compared to a traditional regeneration process, resulting in effective process intensification.
- 25 February 2021
- Published by Springer Nature in Adsorption
- Vol. 27 (4) , 603-617
Nitrogen rejection from landfill gas using Pressure Swing Adsorption
- 25 February 2021
- Published by Springer Nature in Adsorption
- Vol. 27 (4) , 603-617
Nitrogen rejection from landfill gas using Pressure Swing Adsorption