Murali Patla
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Murali Patla has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Crystal Runa Soans
Department of Orthodontics and Dentofacial Orthopaedics, Nitte (Deemed to be University), AB Shetty Memorial Institute of Dental Sciences (ABSMIDS), India
6 shared publications - Marakini Subrahmanya Ravi
NITTE (Deemed to be University)
4 shared publications - Azhar Mohammed
NITTE (Deemed to be University), India
3 shared publications - Kaushik Shetty
Department of Orthodontics and Dentofacial Orthopedics, AB Shetty Memorial Institute of Dental Sciences (ABSMIDS), Nitte (Deemed to be University), Mangaluru, Karnataka, India
2 shared publications - Mn Kuttappa
Orthodontics and Dentofacial Orthopedics, A B Shetty Memorial Institute of Dental Sciences; Nitte (Deemed to be University), Mangalore, Karnataka, 575018, India
2 shared publications - Prajwal Shetty
Nitte (deemed to be) University
2 shared publications
Latest Publications
- Open Access
- 17 October 2026
- Published by Scientific Scholar in Journal of Health and Allied Sciences NU
- p. 1-6
Orthodontic-Surgical Management of Skeletal Class III Malocclusion: A Case-Based Approach
Skeletal Class III malocclusions in adults pose significant treatment challenges due to the involvement of complex skeletal discrepancies such as maxillary deficiency, mandibular prognathism, or a combination of both. This case report highlights two adult patients with distinct skeletal Class III presentations, one with mandibular prognathism and chin deviation, and the other with midfacial retrusion accompanied by an anterior open bite. Both patients underwent comprehensive treatment involving presurgical orthodontic decompensation using MBT appliances, followed by orthognathic surgery. Surgical interventions included Le Fort I osteotomy for maxillary advancement and bilateral sagittal split osteotomy (BSSO) for mandibular setback. Post-treatment outcomes revealed marked improvements in occlusion, facial aesthetics, and overall patient satisfaction. These cases emphasize the importance of a coordinated orthodontic-surgical approach for achieving functional stability and aesthetic harmony in adult patients with severe skeletal Class III malocclusions.
- 17 October 2026
- Published by Scientific Scholar in Journal of Health and Allied Sciences NU
- p. 1-6
Open AccessOrthodontic-Surgical Management of Skeletal Class III Malocclusion: A Case-Based Approach
Skeletal Class III malocclusions in adults pose significant treatment challenges due to the involvement of complex skeletal discrepancies such as maxillary deficiency, mandibular prognathism, or a combination of both. This case report highlights two adult patients with distinct skeletal Class III presentations, one with mandibular prognathism and chin deviation, and the other with midfacial retrusion accompanied by an anterior open bite. Both patients underwent comprehensive treatment involving presurgical orthodontic decompensation using MBT appliances, followed by orthognathic surgery. Surgical interventions included Le Fort I osteotomy for maxillary advancement and bilateral sagittal split osteotomy (BSSO) for mandibular setback. Post-treatment outcomes revealed marked improvements in occlusion, facial aesthetics, and overall patient satisfaction. These cases emphasize the importance of a coordinated orthodontic-surgical approach for achieving functional stability and aesthetic harmony in adult patients with severe skeletal Class III malocclusions.
- 1 January 2023
- Published by Jaypee Brothers Medical Publishing in The Journal of Contemporary Dental Practice
- Vol. 24 (11) , 891-894
Effect of Different Disinfecting Agents on Surface Roughness and Color Stability of Heat-cure Acrylic Denture Material: An In Vitro Study
The current study aimed to determine the impact of three different disinfectants on the surface roughness and color stability of heat-cure acrylic denture material. Using a stainless-steel mold, disc-shaped wax patterns with dimensions of 10 mm in diameter and 2 mm thick (in accordance with ADA Specification No. 12) were created and prepared for a total of 75 acrylic samples. Dimensions of all 75 acrylic samples were checked with a digital Vernier caliper. About 25 samples of denture base material were immersed in three different chemical disinfectants: Group I: immersed in chlorhexidine gluconate solution, group II: immersed in sodium hypochlorite solution, and group III: immersed in glutaraldehyde solution. All samples were scrubbed daily for 1 minute with the appropriate disinfectant and submerged for 10 minutes in the same disinfectant. Between disinfection cycles, samples were kept in distilled water at 37°C. Color stability was measured using a reflection spectrophotometer. Surface roughness values were measured by a profilometer at baseline following 15 days and 30 days. After 15 days, the color stability was better in chlorhexidine gluconate solution group (4.88 ± 0.24) than sodium hypochlorite solution (4.74 ± 0.18) and glutaraldehyde solution group (4.46 ± 0.16). The mean surface roughness was less in glutaraldehyde solution group (2.10 ± 0.19), followed by chlorhexidine gluconate solution group (2.48 ± 0.09) and sodium hypochlorite solution group (2.64 ± 0.03). After 30 days, the color stability was significantly better in chlorhexidine gluconate solution group (4.40 ± 0.02), followed by sodium hypochlorite solution (4.06 ± 0.16) and glutaraldehyde solution group (3.87 ± 0.17). The mean surface roughness was significantly lesser in glutaraldehyde solution group (2.41 ± 0.14), followed by chlorhexidine gluconate solution group (2.94 ± 0.08) and sodium hypochlorite solution group (3.02 ± 0.13). In conclusion, the color stability was significantly better in chlorhexidine gluconate solution group than sodium hypochlorite solution and glutaraldehyde solution group. But the surface roughness was significantly lesser in the glutaraldehyde solution group, followed by the chlorhexidine gluconate and sodium hypochlorite solution group. The maintenance of the prosthesis requires the use of a denture disinfectant; therefore, it is crucial to select one that is effective but would not have a negative impact on the denture base resin's inherent characteristics over time. How to cite this article: Kannaiyan K, Rakshit P, Bhat MPS, et al. Effect of Different Disinfecting Agents on Surface Roughness and Color Stability of Heat-cure Acrylic Denture Material: An In Vitro Study. J Contemp Dent Pract 2023;24(11):891-894.
- 1 January 2023
- Published by Jaypee Brothers Medical Publishing in The Journal of Contemporary Dental Practice
- Vol. 24 (11) , 891-894
Effect of Different Disinfecting Agents on Surface Roughness and Color Stability of Heat-cure Acrylic Denture Material: An In Vitro Study
The current study aimed to determine the impact of three different disinfectants on the surface roughness and color stability of heat-cure acrylic denture material. Using a stainless-steel mold, disc-shaped wax patterns with dimensions of 10 mm in diameter and 2 mm thick (in accordance with ADA Specification No. 12) were created and prepared for a total of 75 acrylic samples. Dimensions of all 75 acrylic samples were checked with a digital Vernier caliper. About 25 samples of denture base material were immersed in three different chemical disinfectants: Group I: immersed in chlorhexidine gluconate solution, group II: immersed in sodium hypochlorite solution, and group III: immersed in glutaraldehyde solution. All samples were scrubbed daily for 1 minute with the appropriate disinfectant and submerged for 10 minutes in the same disinfectant. Between disinfection cycles, samples were kept in distilled water at 37°C. Color stability was measured using a reflection spectrophotometer. Surface roughness values were measured by a profilometer at baseline following 15 days and 30 days. After 15 days, the color stability was better in chlorhexidine gluconate solution group (4.88 ± 0.24) than sodium hypochlorite solution (4.74 ± 0.18) and glutaraldehyde solution group (4.46 ± 0.16). The mean surface roughness was less in glutaraldehyde solution group (2.10 ± 0.19), followed by chlorhexidine gluconate solution group (2.48 ± 0.09) and sodium hypochlorite solution group (2.64 ± 0.03). After 30 days, the color stability was significantly better in chlorhexidine gluconate solution group (4.40 ± 0.02), followed by sodium hypochlorite solution (4.06 ± 0.16) and glutaraldehyde solution group (3.87 ± 0.17). The mean surface roughness was significantly lesser in glutaraldehyde solution group (2.41 ± 0.14), followed by chlorhexidine gluconate solution group (2.94 ± 0.08) and sodium hypochlorite solution group (3.02 ± 0.13). In conclusion, the color stability was significantly better in chlorhexidine gluconate solution group than sodium hypochlorite solution and glutaraldehyde solution group. But the surface roughness was significantly lesser in the glutaraldehyde solution group, followed by the chlorhexidine gluconate and sodium hypochlorite solution group. The maintenance of the prosthesis requires the use of a denture disinfectant; therefore, it is crucial to select one that is effective but would not have a negative impact on the denture base resin's inherent characteristics over time. How to cite this article: Kannaiyan K, Rakshit P, Bhat MPS, et al. Effect of Different Disinfecting Agents on Surface Roughness and Color Stability of Heat-cure Acrylic Denture Material: An In Vitro Study. J Contemp Dent Pract 2023;24(11):891-894.
- 2 February 2021
- Published by Galenos Yayinevi in Gulhane Medical Journal
- Vol. 63 (1) , 13-19
Assessment of mandibular buccal shelf for an ideal miniscrew implantation site using Cone-Beam Computed Tomography
- 2 February 2021
- Published by Galenos Yayinevi in Gulhane Medical Journal
- Vol. 63 (1) , 13-19
Assessment of mandibular buccal shelf for an ideal miniscrew implantation site using Cone-Beam Computed Tomography
- 4 August 2020
- Published by Wiley in Orthodontics & Craniofacial Research
- Vol. 24 (1) , 121-129
Optimal sites for mini‐implant insertion in the lingual or palatal alveolar cortical bone as assessed by cone beam computed tomography in South Indian population
Objectives: To determine the optimal sites of mini‐implant placement in the palatal alveolar cortical bone by using cone beam computed tomography (CBCT).Subjects and Methods: Cone beam computed tomography records of 60 patients were divided into two groups of equal sizes, based on age and sex. The images were analysed using Planmeca Romexis Software (Version 4.1.2). The measurements were made in axial sections of the maxilla and mandible, at 2, 4 and 6 mm from the CEJ. The optimal sites were defined in terms of (a) Palatal or lingual alveolar cortical bone thickness and (b) Mesiodistal palatal or lingual inter‐radicular width.Results: The optimal site for mini‐implant insertion, anteriorly, was the canine‐lateral incisor embrasure in both the jaws. Posteriorly, the inter‐molar embrasure in the mandible and the molar‐premolar embrasure in the maxilla were optimal sites. Females demonstrated significantly lesser bone widths in all areas of the maxilla (P < .05) but greater bone thickness in the mandibular regions, as compared to males. The adolescent age group demonstrated a significantly lesser bone thickness but greater mesiodistal widths than the adult population in both the jaws (P < .05).Conclusion: The optimal sites for mini‐implant insertion were the anterior canine‐lateral incisor and posterior buccal inter‐radicular embrasures, in both the jaws. Significant differences existed between age and gender groups, which need to be kept in mind while choosing the locations for placing mini‐implants.
- 4 August 2020
- Published by Wiley in Orthodontics & Craniofacial Research
- Vol. 24 (1) , 121-129
Optimal sites for mini‐implant insertion in the lingual or palatal alveolar cortical bone as assessed by cone beam computed tomography in South Indian population
Objectives: To determine the optimal sites of mini‐implant placement in the palatal alveolar cortical bone by using cone beam computed tomography (CBCT).Subjects and Methods: Cone beam computed tomography records of 60 patients were divided into two groups of equal sizes, based on age and sex. The images were analysed using Planmeca Romexis Software (Version 4.1.2). The measurements were made in axial sections of the maxilla and mandible, at 2, 4 and 6 mm from the CEJ. The optimal sites were defined in terms of (a) Palatal or lingual alveolar cortical bone thickness and (b) Mesiodistal palatal or lingual inter‐radicular width.Results: The optimal site for mini‐implant insertion, anteriorly, was the canine‐lateral incisor embrasure in both the jaws. Posteriorly, the inter‐molar embrasure in the mandible and the molar‐premolar embrasure in the maxilla were optimal sites. Females demonstrated significantly lesser bone widths in all areas of the maxilla (P < .05) but greater bone thickness in the mandibular regions, as compared to males. The adolescent age group demonstrated a significantly lesser bone thickness but greater mesiodistal widths than the adult population in both the jaws (P < .05).Conclusion: The optimal sites for mini‐implant insertion were the anterior canine‐lateral incisor and posterior buccal inter‐radicular embrasures, in both the jaws. Significant differences existed between age and gender groups, which need to be kept in mind while choosing the locations for placing mini‐implants.
- 1 January 2020
- Published by Medknow in Indian Journal of Dental Research
- Vol. 31 (3) , 382-388
Assessment of dentofacial widths in adults with anterior open bite
Context: Anterior open bite is a complex condition involving a combination of various dental and skeletal components in three dimensions. The data on the differences and changes in the transverse relation in individuals with anterior open bite are limited. Aims: To assess the dental arch widths in individuals with anterior open bite using study casts and facial widths using frontal cephalogram and to compare these widths with that of individuals without anterior open bite. Materials and Methods: Eighty adults [40 with and 40 without anterior open bite, mean (standard deviation) age = 20.68 years] were selected. The study group was divided into skeletal (n = 19) and dental (n = 21) open bite groups according to Jarabak's ratio. Posteroanterior cephalograms and study casts were analyzed. Results: The mean width of zygomatic arch (112.18 mm) and condylar region (100.55 mm) in the control group was significantly higher (P < 0.05). The mean gonial width in the skeletal open bite group (81.143 mm) was significantly (P < 0.05) lesser than the dental open bite group (84.842). The maxillary intercanine width for the skeletal open bite group (36.48 mm) was significantly (P < 0.01) higher than that of the dental open bite group (34.26 mm). Conclusion: A transverse deficiency was seen in in the zygomatic and condylar regions in adults with anterior open bite. Individuals with a skeletal open bite showed a narrow gonial and wider maxillary intercanine width compared with individuals with dental open bite.
- 1 January 2020
- Published by Medknow in Indian Journal of Dental Research
- Vol. 31 (3) , 382-388
Assessment of dentofacial widths in adults with anterior open bite
Context: Anterior open bite is a complex condition involving a combination of various dental and skeletal components in three dimensions. The data on the differences and changes in the transverse relation in individuals with anterior open bite are limited. Aims: To assess the dental arch widths in individuals with anterior open bite using study casts and facial widths using frontal cephalogram and to compare these widths with that of individuals without anterior open bite. Materials and Methods: Eighty adults [40 with and 40 without anterior open bite, mean (standard deviation) age = 20.68 years] were selected. The study group was divided into skeletal (n = 19) and dental (n = 21) open bite groups according to Jarabak's ratio. Posteroanterior cephalograms and study casts were analyzed. Results: The mean width of zygomatic arch (112.18 mm) and condylar region (100.55 mm) in the control group was significantly higher (P < 0.05). The mean gonial width in the skeletal open bite group (81.143 mm) was significantly (P < 0.05) lesser than the dental open bite group (84.842). The maxillary intercanine width for the skeletal open bite group (36.48 mm) was significantly (P < 0.01) higher than that of the dental open bite group (34.26 mm). Conclusion: A transverse deficiency was seen in in the zygomatic and condylar regions in adults with anterior open bite. Individuals with a skeletal open bite showed a narrow gonial and wider maxillary intercanine width compared with individuals with dental open bite.
- Open Access
- 1 January 2020
- Published by Medknow in Journal of Family Medicine and Primary Care
- Vol. 9 (2) , 1103-1107
A proposed classification for orthodontic practice in India
Aim and Background: Dental practice is blooming in India with many conventional and advanced setups providing orthodontic services. Orthodontics as a specialty has come to the forefront, as awareness of orthodontic therapy has increased. It is important to classify any health practice to understand, compare, and research the implications of various organizational setups in the country. It should possess the ability to chart the similarities and distinctions between different setups for ease of communication and patient awareness. Presently, there is no defined system that classifies the type of orthodontic practice in the country. Lack of any classification of the organizational setups makes it impossible to categorize or compare the various setups for research purpose, recognition of the dental personnel and facilities provided. This article aims to propose a simple 3-stage classification to orthodontic practices in India. Technique: Three-stage classification of orthodontic practice in group, type, and subtype gives a comprehensive coverage to all types of orthodontic setups in India. The group explains the center in three levels based on the armamentarium and services provided. The type explains the center in five levels based on ownership and scope of providing care. Finally, the subtype explains the availability and qualification of the operating personnel. Conclusion and Significance: This classification aims to provide a tool for communication and recording the levels of orthodontic care possible at any given center. It also facilitates continued study of its impact on practice efficacy and patient awareness.
- 1 January 2020
- Published by Medknow in Journal of Family Medicine and Primary Care
- Vol. 9 (2) , 1103-1107
Open AccessA proposed classification for orthodontic practice in India
Aim and Background: Dental practice is blooming in India with many conventional and advanced setups providing orthodontic services. Orthodontics as a specialty has come to the forefront, as awareness of orthodontic therapy has increased. It is important to classify any health practice to understand, compare, and research the implications of various organizational setups in the country. It should possess the ability to chart the similarities and distinctions between different setups for ease of communication and patient awareness. Presently, there is no defined system that classifies the type of orthodontic practice in the country. Lack of any classification of the organizational setups makes it impossible to categorize or compare the various setups for research purpose, recognition of the dental personnel and facilities provided. This article aims to propose a simple 3-stage classification to orthodontic practices in India. Technique: Three-stage classification of orthodontic practice in group, type, and subtype gives a comprehensive coverage to all types of orthodontic setups in India. The group explains the center in three levels based on the armamentarium and services provided. The type explains the center in five levels based on ownership and scope of providing care. Finally, the subtype explains the availability and qualification of the operating personnel. Conclusion and Significance: This classification aims to provide a tool for communication and recording the levels of orthodontic care possible at any given center. It also facilitates continued study of its impact on practice efficacy and patient awareness.
- Open Access
- 1 January 2019
- Published by Diva Enterprises Private Limited in Indian Journal of Public Health Research & Development
- Vol. 10 (10) , 32-38
Evaluation of Antimicrobial Properties of Orthodontic Adhesive Mixed with Silver Nanoparticles: An in Vitro Study
Objective The aim of the present study was to assess the antimicrobial activity of orthodontic adhesive mixed with silver nanoparticles (SNPs) in varying concentrations. Material and method SNPs were prepared by using the chemical reduction method and characterized using UV-Vis Spectrophotometer, Fourier Transform Infrared Spectroscopy, and Scanning Electron Microscopy. The synthesized SNPs were mixed with commercially available orthodontic adhesive TransbondTM XT in varying concentrations (1%, 5% and 10%, n = 20 each) w/w and were formed into disc shaped specimens and incubated with Streptococcus mutans MTCC 497 and Lactobacillus acidophilus MTCC10307. The Disc Diffusion test was performed to examine the growth inhibition zones. Adhesive discs without silver nanoparticles were used as control (n = 20). The data was interpreted statistically with Kruskal-Wallis test followed by Tukeys Post Hoc analysis and Mann Whitney U test. P < 0.05 was considered statistically significant. Results The characterization of reduced silver ions by UV spectroscopy showed surface plasma resonance band around 400nm. SEM study showed particles with roughly spherical shape with less than 100 nm size. The present study showed that the orthodontic bonding adhesive with SNPs showed higher antimicrobial activity against Streptococcus mutans and Lactobacillus acidophilus as compared to the control group even in low concentration of 1% (P < 0.05). The adhesive mixed with SNPs in varying concentrations exhibited higher zone of inhibition in Streptococcus mutans compared with Lactobacillus acidophilus (P < 0.05). Conclusion The present study showed that the orthodontic bonding adhesive with silver nanoparticles showed excellent antimicrobial activity against Streptococcus mutans and Lactobacillus acidophilus even in low concentrations.
- 1 January 2019
- Published by Diva Enterprises Private Limited in Indian Journal of Public Health Research & Development
- Vol. 10 (10) , 32-38
Open AccessEvaluation of Antimicrobial Properties of Orthodontic Adhesive Mixed with Silver Nanoparticles: An in Vitro Study
Objective The aim of the present study was to assess the antimicrobial activity of orthodontic adhesive mixed with silver nanoparticles (SNPs) in varying concentrations. Material and method SNPs were prepared by using the chemical reduction method and characterized using UV-Vis Spectrophotometer, Fourier Transform Infrared Spectroscopy, and Scanning Electron Microscopy. The synthesized SNPs were mixed with commercially available orthodontic adhesive TransbondTM XT in varying concentrations (1%, 5% and 10%, n = 20 each) w/w and were formed into disc shaped specimens and incubated with Streptococcus mutans MTCC 497 and Lactobacillus acidophilus MTCC10307. The Disc Diffusion test was performed to examine the growth inhibition zones. Adhesive discs without silver nanoparticles were used as control (n = 20). The data was interpreted statistically with Kruskal-Wallis test followed by Tukeys Post Hoc analysis and Mann Whitney U test. P < 0.05 was considered statistically significant. Results The characterization of reduced silver ions by UV spectroscopy showed surface plasma resonance band around 400nm. SEM study showed particles with roughly spherical shape with less than 100 nm size. The present study showed that the orthodontic bonding adhesive with SNPs showed higher antimicrobial activity against Streptococcus mutans and Lactobacillus acidophilus as compared to the control group even in low concentration of 1% (P < 0.05). The adhesive mixed with SNPs in varying concentrations exhibited higher zone of inhibition in Streptococcus mutans compared with Lactobacillus acidophilus (P < 0.05). Conclusion The present study showed that the orthodontic bonding adhesive with silver nanoparticles showed excellent antimicrobial activity against Streptococcus mutans and Lactobacillus acidophilus even in low concentrations.
- 19 December 2018
- Published by Taylor & Francis in Orthodontic Waves
- Vol. 78 (1) , 18-25
Mapping of palatal bone thickness using computed tomography for placement of mini screws — A comparative study between genders, adolescents and adults
Purpose: The purpose of this study is to determine variations in cortical bone heights and thickness of the hard palate for placing orthodontic mini screws. Additionally it was evaluated whether there are any significant variations between males and females, adolescents and adults, right and left sides of the hard palate in the study population. Materials and methods CBCT images of 50 patients were retrospectively analysed. Patients were divided into sub-groups: 25 males and females, 24 adolescents (age range 10–19 years) and 26 adults (age range 20–27 years). Hard palate heights and thicknesses were analysed from the incisive fossa to the inter-embrasure region between the 1st and 2nd molars were analysed. Results: The data revealed that the overall greatest thickness was at the canine-1st premolar embrasure region and the greatest height at the inter-premolar embrasure region. Males showed greater cortical thickness in almost all areas of the palate with significantly greater values in the inter-premolar region. Adolescents showed greater palatal heights than adults in almost all areas with significantly greater values in the inter-molar embrasures. The mid palatal regions showed significantly greater palatal heights in all subgroups. Conclusion: Orthodontic Mini screws can be optimally placed in the anterior regions of the hard palate for all the groups studied. Males and adolescents showed greater cortical heights as compared to the female and adult population studied.
- 19 December 2018
- Published by Taylor & Francis in Orthodontic Waves
- Vol. 78 (1) , 18-25
Mapping of palatal bone thickness using computed tomography for placement of mini screws — A comparative study between genders, adolescents and adults
Purpose: The purpose of this study is to determine variations in cortical bone heights and thickness of the hard palate for placing orthodontic mini screws. Additionally it was evaluated whether there are any significant variations between males and females, adolescents and adults, right and left sides of the hard palate in the study population. Materials and methods CBCT images of 50 patients were retrospectively analysed. Patients were divided into sub-groups: 25 males and females, 24 adolescents (age range 10–19 years) and 26 adults (age range 20–27 years). Hard palate heights and thicknesses were analysed from the incisive fossa to the inter-embrasure region between the 1st and 2nd molars were analysed. Results: The data revealed that the overall greatest thickness was at the canine-1st premolar embrasure region and the greatest height at the inter-premolar embrasure region. Males showed greater cortical thickness in almost all areas of the palate with significantly greater values in the inter-premolar region. Adolescents showed greater palatal heights than adults in almost all areas with significantly greater values in the inter-molar embrasures. The mid palatal regions showed significantly greater palatal heights in all subgroups. Conclusion: Orthodontic Mini screws can be optimally placed in the anterior regions of the hard palate for all the groups studied. Males and adolescents showed greater cortical heights as compared to the female and adult population studied.
- Open Access
- 26 August 2018
- Published by Universitas Indonesia in Journal of Dentistry Indonesia
- Vol. 25 (2) , 104-107-107
Assessment of Dermatoglyphic Patterns With Malocclusion
Assessment of Dermatoglyphic Patterns With Malocclusion
- 26 August 2018
- Published by Universitas Indonesia in Journal of Dentistry Indonesia
- Vol. 25 (2) , 104-107-107
Open AccessAssessment of Dermatoglyphic Patterns With Malocclusion
Assessment of Dermatoglyphic Patterns With Malocclusion
- 6 August 2018
- Published by Akshantala Enterprises Private Limited in Journal of Evolution of Medical and Dental Sciences
- Vol. 7 (32) , 3569-3576
MEDICAL STUDENTS’ AWARENESS OF ORTHODONTICS- A COMPARATIVE QUESTIONNAIRE SURVEY STUDY BETWEEN THE STUDENTS OF A MEDICAL COLLEGE ATTACHED WITH A DENTAL COLLEGE AND A STAND-ALONE MEDICAL COLLEGE
- 6 August 2018
- Published by Akshantala Enterprises Private Limited in Journal of Evolution of Medical and Dental Sciences
- Vol. 7 (32) , 3569-3576
MEDICAL STUDENTS’ AWARENESS OF ORTHODONTICS- A COMPARATIVE QUESTIONNAIRE SURVEY STUDY BETWEEN THE STUDENTS OF A MEDICAL COLLEGE ATTACHED WITH A DENTAL COLLEGE AND A STAND-ALONE MEDICAL COLLEGE