NSNarendra Mohan Suri

Narendra Mohan Suri

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Narendra Mohan Suri has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    High temperature tribological and electrochemical behavior of heat-treated Al2O3-base hybrid coating sprayed by HVOF thermal spray technique

    by R. S. Sonia, R S Walia, N M Suri, Sumit Chaudhary

    In the present study, the hybrid coating was developed by HVOF over the cast iron substrate. The hybrid coating material comprises Al2O3 (80% w/w) enriched with graphite, MoS2, and fumed silica in w/w of 5%, 10%, and 5% respectively. Microstructure and phase composition of prepared coated samples were analyzed by SEM-EDS, XRD and Raman Spectroscopy. The coated samples were heat-treated and their mechanical, electrochemical and tribological behavior was compared with the as-coated samples. There was a considerable change observed in the micro-hardness and anti-corrosion properties of the coated material after heat treatment. The residual stresses in the heat-treated sample decreased compared to the as-coated sample. The high-temperature tribological investigation was carried out in non-lubricated conditions at three different temperatures 30 °C, 150 °C, and 300 °C with a constant load of 40 N and variable sliding speed. The coefficient of friction and wear rate was calculated and it was found that there was a decrement up to 36% in the wear rate of the heat-treated samples compared to the as-coated sample. The SEM morphologies of the wear track showed the presence of small cracks, adhesion, abrasion and smear regions due to plastic deformation.


  • Simulation and experimental research of material removal rate in micro-electrochemical discharge machining process

    by Manoj Kumar, R.O. Vaishya, N.M. Suri

    Zirconia is a ceramic material having a wide range of applications in industries owing to its excellent properties like high strength-to-weight ratio, biocompatibility, insulating, high wear, thermal resistance, and chemical stability over conventional materials. These properties pose a significant challenge for machining at the micro-level with considerable accuracy and preciseness. The ECDM is a low-cost hybrid machining technique with great potential to machine such materials. Barely any simulated or numerical work has been available for machining zirconia material through the ECDM process. In this study, a finite element model (FEM) is developed to predict the material removal rate (MRR) of the zirconia material using the temperature distribution plots through the electrochemical discharge machining process (ECDM) for different parametric conditions using a single spark mechanism. The simulation results reveal the increase of 316.9 µg in MRR by increasing electrolytic concentration from 15% to 30% wt. However, a small error was found between simulated and experimental results, which might be due to the assumptions during the study. This study will provide new guidelines during the processing of zirconia material for predicting the material removal rate for future manufacturing engineers.


  • Occupational heat stress under high-heat furnace work environments - a comprehensive review on developing countries

    by Milap Sharma, Sarfaraz ALAM, Narendra Mohan Suri, Suman Kant

    In developing countries, workers’ employed under high-heat furnace work environments are exposed to severe heat stress; an ignored occupational health hazard especially under the unorganized work-sectors. During hot summer season, lot of underprivileged workers are strained by harsh thermal work-conditions with subsequent health challenges, declining their productivity and attributes to financial burden. As compared to developed countries, absence of adequate regulatory guidelines and control policies increases the risk-severity under the rampant conditions. The aim of the present study is to gain insights on the prevalence of occupational heat-stress under high-heat furnace work environments with special reference to developing countries. Present review study recognizes the prevalent issues by summarizing the dominant heat-stress factors (environmental, individual, and physiological), suitable assessment strategies, and consequent negative impacts on health and productivity followed by encapsulation of related heat-stress assessment studies particularly from the developing countries. From the assessment studies, it’s evident that the predominant chronic heat-stress adversely impacts the workers’ health and accompanying performance loss. Apart from heat related morbidities, severe health impacts such as immunological suppression, renal/urologic anomalies, and sub-cellular DNA damage are also attributable to this occupational health hazard. The prevalent thermal work-conditions necessitates implementation of adequate preventive measures and control policies to ameliorate the workers’ productive capacity and social well-being. Remedial control interventions like proper ventilation design, installing reflective thermal protective shields, providing cooling spots, optimized cooling vest design, and sensor based intelligence may be considered as an effective control measures with emphasis on ameliorating the heat stress exposure under high-heat furnace work environments.